summaryrefslogtreecommitdiffstats
path: root/drivers/scsi
Commit message (Collapse)AuthorAgeFilesLines
* [SCSI] qla2xxx: Add portid to async-request messages.Andrew Vasquez2010-07-272-16/+31
| | | | | | | | This helps to correlate submission/completion messages during triaging. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Clear drive active CRB register when not in use.Giridhar Malavali2010-07-276-5/+13
| | | | | | | | The CRB drive active register is cleared when driver is unloaded or when driver enters failed state. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: fix block fetch table problem.Stephen M. Cameron2010-07-271-1/+20
| | | | | | | | | | | | | | | | | | We have 32 (MAXSGENTRIES) scatter gather elements embedded in the command. With all these, the total command size is about 576 bytes. However, the last entry in the block fetch table is 35. (the block fetch table contains the number of 16-byte chunks the firmware needs to fetch for a given number of scatter gather elements.) 35 * 16 = 560 bytes, which isn't enough. It needs to be 36. (36 * 16 == 576) or, MAXSGENTRIES + 4. (plus 4 because there's a bunch of stuff at the front of the command before the first scatter gather element that takes up 4 * 16 bytes.) Without this fix, the controller may have to perform two DMA operations to fetch the command since the first one may not get the whole thing. Signed-off-by: Don Brace <brace@beardog.cce.hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: expose controller firmware revision via /sys.Stephen M. Cameron2010-07-271-0/+20
| | | | | Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: remove unused firm_ver member of the per-hba structureStephen M. Cameron2010-07-272-7/+0
| | | | | Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: factor out hpsa_enter_performant_modeStephen M. Cameron2010-07-271-24/+30
| | | | | Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: remove unused variable trans_offsetStephen M. Cameron2010-07-271-2/+0
| | | | | Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: factor out hpsa_wait_for_mode_change_ackStephen M. Cameron2010-07-271-23/+17
| | | | | Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: mark hpsa_mark_hpsa_put_ctlr_into_performant_mode as __devinitStephen M. Cameron2010-07-271-2/+2
| | | | | Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: clean up debug ifdefsStephen M. Cameron2010-07-271-6/+2
| | | | | Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: check that simple mode is supportedStephen M. Cameron2010-07-271-0/+5
| | | | | | | before trying to enter simple mode transport method. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: factor out hpsa_enter_simple_modeStephen M. Cameron2010-07-271-27/+35
| | | | | Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: factor out hpsa_p600_dma_prefetch_quirkStephen M. Cameron2010-07-271-11/+15
| | | | | Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: factor out hpsa_enable_scsi_prefetchStephen M. Cameron2010-07-271-9/+13
| | | | | Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: factor out hpsa-CISS-signature-presentStephen M. Cameron2010-07-271-5/+13
| | | | | Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: hpsa factor out hpsa_find_board_paramsStephen M. Cameron2010-07-271-21/+25
| | | | | Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: fix leak of ioremapped memory in hpsa_pci_init error path.Stephen M. Cameron2010-07-271-1/+12
| | | | | Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: factor out hpsa_find_cfgtablesStephen M. Cameron2010-07-271-20/+30
| | | | | Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: factor out hpsa_wait_for_board_readyStephen M. Cameron2010-07-271-12/+17
| | | | | Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: factor out hpsa_find_memory_BARStephen M. Cameron2010-07-271-15/+19
| | | | | Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: remove redundant board_id parameter from hpsa_interrupt_modeStephen M. Cameron2010-07-271-9/+4
| | | | | | | and delete duplicated comment Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: factor out hpsa_board_disabledStephen M. Cameron2010-07-271-7/+9
| | | | | Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: factor out hpsa_lookup_board_idStephen M. Cameron2010-07-271-27/+31
| | | | | Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: save pdev pointer in per hba structure early to avoid passing ↵Stephen M. Cameron2010-07-271-37/+38
| | | | | | | it around so much. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hptiop: Eliminate a NULL pointer dereferenceJulia Lawall2010-07-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The end of the function is reachable both when host is and is not NULL. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression E,E1; identifier f; statement S1,S2,S3; @@ if ((E == NULL && ...) || ...) { ... when != if (...) S1 else S2 when != E = E1 * E->f ... when any return ...; } else S3 // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: DIF Type 2 Protection SupportEric Moore2010-07-272-8/+14
| | | | | | | | | Adding DIF Type 2 protection support, as well as turning on 32 byte cdb's, and setting the cdb length for > 16 byte in the SCSI_IO->control parameter. Signed-off-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Eric Moore <eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] ibmvscsi: Fix oops when an interrupt is pending during probeAnton Blanchard2010-07-271-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A driver needs to be ready to take an interrupt as soon as it registers an interrupt handler. I noticed the following oops when testing kdump: ipr: IBM Power RAID SCSI Device Driver version: 2.5.0 (February 11, 2010) ibmvscsi 30000002: SRP_VERSION: 16.a ibmvscsi 30000002: SRP_VERSION: 16.a Unable to handle kernel paging request for data at address 0x00000000 ... pc: c000000004085e34: .tasklet_action+0xf4/0x1dc ... c000000004086fe4 .__do_softirq+0x16c/0x2c0 c00000000403138c .call_do_softirq+0x14/0x24 c00000000400ee14 .do_softirq+0xa0/0x104 c00000000408690c .irq_exit+0x70/0xd0 c00000000400f190 .do_IRQ+0x214/0x2a8 c000000004004804 hardware_interrupt_entry+0x1c/0x98 --- Exception: 501 (Hardware Interrupt) at c00000000400c544 .raw_local_irq_restore+0x48/0x54 c00000000465d2a8 ._raw_spin_unlock_irqrestore+0x74/0xa0 c0000000040e7f00 .__setup_irq+0x2ec/0x3f0 c0000000040e8198 .request_threaded_irq+0x194/0x22c c00000000446d854 .rpavscsi_init_crq_queue+0x284/0x3f0 c00000000446c764 .ibmvscsi_probe+0x688/0x710 c00000000402903c .vio_bus_probe+0x37c/0x3e4 c000000004403f10 .driver_probe_device+0xec/0x1b8 c000000004404088 .__driver_attach+0xac/0xf4 c000000004403184 .bus_for_each_dev+0x98/0x104 c000000004403c98 .driver_attach+0x40/0x60 c0000000044026f0 .bus_add_driver+0x154/0x324 c0000000044045d0 .driver_register+0xe8/0x1ac c00000000402b2a8 .vio_register_driver+0x54/0x74 c000000004933ea4 .ibmvscsi_module_init+0x80/0xc0 c000000004009834 .do_one_initcall+0x98/0x1d8 c0000000049005b4 .kernel_init+0x27c/0x33c c000000004031550 .kernel_thread+0x54/0x70 srp_task needs to be setup before request_irq. The patch below fixes the oops. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] ipr: fix resource path display and formattingWayne Boyer2010-07-212-20/+36
| | | | | | | | | | | | | | It was possible to overflow the buffer used to print out the formatted version of the resource path. The fix is to limit the number of bytes that get formatted. This patch also updates the ipr_show_resource_path function to display the resource address for devices that are attached to adapters that don't support resource paths. Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* Merge branch 'upstream-linus' of ↵Linus Torvalds2010-06-031-0/+22
|\ | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: implement on-demand HPA unlocking libata: use the enlarged capacity after late HPA unlock SCSI: implement sd_unlock_native_capacity() libata-sff: trivial corrections to Kconfig help text sata_nv: don't diddle with nIEN on mcp55 sata_via: magic vt6421 fix for transmission problems w/ WD drives
| * SCSI: implement sd_unlock_native_capacity()Tejun Heo2010-06-021-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | Implement sd_unlock_native_capacity() method which calls into hostt->unlock_native_capacity() if implemented. This will be invoked by block layer if partitions extend beyond the end of the device and can be used to implement, for example, on-demand ATA host protected area unlocking. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* | powerpc/macio: Fix probing of macio devices by using the right of match tableBenjamin Herrenschmidt2010-06-022-4/+10
|/ | | | | | | | | | | | | | Grant patches added an of mach table to struct device_driver. However, while he changed the macio device code to use that, he left the match table pointer in struct macio_driver and didn't update drivers to use the "new" one, thus breaking the probing. This completes the change by moving all drivers to setup the "new" one, removing all traces of the old one, and while at it (since it changes the exact same locations), I also remove two other duplicates from struct driver which are the name and owner fields. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds2010-05-2710-306/+708
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: [SCSI] fix race in scsi_target_reap [SCSI] aacraid: Eliminate use after free [SCSI] arcmsr: Support HW reset for EH and polling scheme for scsi device [SCSI] bfa: fix system crash when reading sysfs fc_host statistics [SCSI] iscsi_tcp: remove sk_sleep check [SCSI] ipr: improve interrupt service routine performance [SCSI] ipr: set the data list length in the request control block [SCSI] ipr: fix a register read to use the correct address for 64 bit adapters [SCSI] ipr: include the resource path in the IOA status area structure [SCSI] ipr: implement fixes for 64 bit adapter support [SCSI] be2iscsi: correct return value in mgmt_invalidate_icds()
| * [SCSI] fix race in scsi_target_reapAlan Stern2010-05-251-4/+5
| | | | | | | | | | | | | | | | | | | | | | This patch (as1357) fixes a race in SCSI target allocation and release. Putting a target in the STARGET_DEL state isn't protected by the host lock, so an old target structure could be reused by a new device even though it's about to be deleted. The cure is to change the state while still holding the host lock. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] aacraid: Eliminate use after freeJulia Lawall2010-05-251-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The debugging code using the freed structure is moved before the kfree. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @free@ expression E; position p; @@ kfree@p(E) @@ expression free.E, subE<=free.E, E1; position free.p; @@ kfree@p(E) ... ( subE = E1 | * E ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] arcmsr: Support HW reset for EH and polling scheme for scsi deviceNick Cheng2010-05-253-191/+525
| | | | | | | | | | | | | | | | | | | | | | | | 1. To support instantaneous report for SCSI device existing by periodic polling 2. In arcmsr_iop_xfer(), inform AP of F/W's deadlock state to prevent endless waiting 3. To block the coming SCSI command while the driver is handling bus reset 4. To support HW reset in bus reset error handler Signed-off-by: Nick Cheng <nick.cheng@areca.com.tw> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] bfa: fix system crash when reading sysfs fc_host statisticsKrishna Gudipati2010-05-251-0/+22
| | | | | | | | | | | | | | | | | | | | The port data structure related to fc_host statistics collection is not initialized. This causes system crash when reading the fc_host statistics. The fix is to initialize port structure during driver attach. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] iscsi_tcp: remove sk_sleep checkMike Christie2010-05-251-4/+2
| | | | | | | | | | | | | | | | There is no need to call sk_sleep before calling wake_up_interruptible, because the wait_queue_head is now with the socket. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] ipr: improve interrupt service routine performanceWayne Boyer2010-05-241-33/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | During performance testing on P7 machines it was observed that the interrupt service routine was doing unnecessary MMIO operations. This patch rearranges the logic of the routine and moves some of the code out of the main routine. The result is that there are now fewer MMIO operations in the performance path of the code. Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] ipr: set the data list length in the request control blockWayne Boyer2010-05-241-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | In bring up testing for the new 64 bit adapters, the first read command failed after loading the driver. The cause was that the command requires more than one scatter gather element and the corresponding code to set the data list length in the request control block was missing. This patch adds the correct assignment. Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] ipr: fix a register read to use the correct address for 64 bit adaptersWayne Boyer2010-05-242-5/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix ipr_reset_enable_ioa() to read the correct IOA to host interrupt register address for 64 bit adapters. We need to read the lower 32 bits, not the upper 32 bits. Also change the write of the 64 bit mask value to a single writeq instead of two writel calls. Finally, use the correct u8 type for the type field in the ipr_resource_entry structure. Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] ipr: include the resource path in the IOA status area structureWayne Boyer2010-05-242-59/+98
| | | | | | | | | | | | | | | | | | | | The IOA status area now includes the new resource path field for 64 bit adapters. This patch changes the driver to fix the ioasa structure and to use the correct structure definition based on the type of adatper. Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] ipr: implement fixes for 64 bit adapter supportWayne Boyer2010-05-242-5/+11
| | | | | | | | | | | | | | | | | | Implement some small fixes for 64 bit support that were preventing the adapter from becoming operational. Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] be2iscsi: correct return value in mgmt_invalidate_icds()Dan Carpenter2010-05-241-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This function should return 0 on error. Returning -1 would cause a crash. Also there is an extra space before the newline character and a missing space between the "for" and the "mgmt_invalidate_icds". I put the string on one line. The current version of checkpatch.pl complains that the line is too long, but it makes grepping easier. Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | Merge branch 'for-linus' of ↵Linus Torvalds2010-05-278-554/+641
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (24 commits) m68k: amiga - RTC platform device conversion m68k: amiga - Parallel port platform device conversion m68k: amiga - Serial port platform device conversion m68k: amiga - Mouse platform device conversion m68k: amiga - Keyboard platform device conversion m68k: amiga - Amiga Gayle IDE platform device conversion m68k: amiga - A4000T SCSI platform device conversion m68k/scsi: a3000 - Do not use legacy Scsi_Host.base m68k: amiga - A3000 SCSI platform device conversion m68k/scsi: gvp11 - Do not use legacy Scsi_Host.base m68k: amiga - GVP Series II SCSI zorro_driver conversion m68k/scsi: a2091 - Do not use legacy Scsi_Host.base m68k: amiga - A2091/A590 SCSI zorro_driver conversion m68k/scsi: mvme147 - Kill obsolete HOSTS_C logic m68k/scsi: a3000 - Kill a3000_scsiregs typedef m68k/scsi: gvp11 - Kill gvp11_scsiregs typedef m68k/scsi: a2091 - Kill a2091_scsiregs typedef m68k/scsi: gvp11 - Extract check_wd33c93() m68k/scsi: a3000 - Kill static global a3000_host m68k/scsi: mvme147 - Kill static global mvme147_host ...
| * | m68k: amiga - A4000T SCSI platform device conversionGeert Uytterhoeven2010-05-261-55/+46
| | | | | | | | | | | | | | | Acked-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
| * | m68k/scsi: a3000 - Do not use legacy Scsi_Host.baseGeert Uytterhoeven2010-05-261-35/+41
| | | | | | | | | | | | | | | Acked-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
| * | m68k: amiga - A3000 SCSI platform device conversionGeert Uytterhoeven2010-05-261-64/+100
| | | | | | | | | | | | | | | Acked-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
| * | m68k/scsi: gvp11 - Do not use legacy Scsi_Host.baseGeert Uytterhoeven2010-05-261-49/+56
| | | | | | | | | | | | | | | Acked-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
| * | m68k: amiga - GVP Series II SCSI zorro_driver conversionGeert Uytterhoeven2010-05-262-149/+156
| | | | | | | | | | | | | | | Acked-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
| * | m68k/scsi: a2091 - Do not use legacy Scsi_Host.baseGeert Uytterhoeven2010-05-261-34/+41
| | | | | | | | | | | | | | | Acked-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
OpenPOWER on IntegriCloud