summaryrefslogtreecommitdiffstats
path: root/drivers/scsi
Commit message (Collapse)AuthorAgeFilesLines
* [SCSI] make use of the residue valueJames Bottomley2008-06-051-0/+9
| | | | | | | | | | | USB sometimes doesn't return an error but instead returns a residue value indicating part (or all) of the command wasn't completed. So if the driver _done() error processing indicates the command was fully processed, subtract off the residue so that this USB error gets propagated. Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] SCSI: remove dev->power.power_state from mesh driverAlan Stern2008-06-051-6/+2
| | | | | | | | | power.power_state is scheduled for removal. This patch (as1055) removes all uses of that field from the SCSI mesh driver. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Paul Mackerras <paulus@au.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: linit.c make aac_show_serial_number staticHarvey Harrison2008-06-051-1/+1
| | | | | | | | drivers/scsi/aacraid/linit.c:865:9: warning: symbol 'aac_show_serial_number' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] scsi_dh: add EMC Clariion device handlerChandra Seetharaman2008-06-053-0/+506
| | | | | | | | | This adds support for EMC Clariions. This patch has the features that currently exists in mainline and advanced features from Ed's patches. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] scsi_dh: add hp sw device handlerMike Christie2008-06-053-0/+211
| | | | | | | | | This patch provides the device handler to support the older hp boxes which cannot be upgraded. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] scsi_dh: add lsi rdac device handlerChandra Seetharaman2008-06-053-0/+698
| | | | | | | | This patch provides the device handler to support the LSI RDAC SCSI based storage devices. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] scsi_dh: add infrastructure for SCSI Device HandlersChandra Seetharaman2008-06-058-0/+201
| | | | | | | | | | | | | | | | | | | | | | Some of the storage devices (that can be accessed through multiple paths), do need some special handling for 1. Activating the passive path of the storage access. 2. Decode and handle the special sense codes returned by the devices. 3. Handle the I/Os being sent to the passive path, especially during the device probe time. when accessed through multiple paths. As of today this special device handling is done at the dm-multipath layer using dm-handlers. That works well for (1); for (2) to be handled at dm layer, scsi sense information need to be exported from SCSI to dm-layer, which is not very attractive; (3) cannot be done at all at the dm layer. Device handler has been moved to SCSI mainly to handle (2) and (3) properly. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds2008-06-0412-87/+73
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] qla2xxx: Update version number to 8.02.01-k4. [SCSI] qla2xxx: Correct handling of AENs postings for vports. [SCSI] qla2xxx: Revert "qla2xxx: Use proper HA during asynchronous event handling." [SCSI] ibmvscsi: Non SCSI error status fixup [SCSI] fusion mpt: fix target missing after resetting external raid [SCSI] fix intermittent oops in scsi_bus_uevent [SCSI] qla2xxx: Update version number to 8.02.01-k3. [SCSI] qla2xxx: Revert "qla2xxx: Validate mid-layer 'underflow' during check-condition handling." [SCSI] qla2xxx: Disable local-interrupts while polling for RISC status. [SCSI] qla2xxx: Extend the 'fw_dump' SYSFS node the ability to initiate a firmware dump. [SCSI] qla2xxx: Don't depend on mailbox return values while enabling FCE tracing. [SCSI] qla2xxx: Convert vport_sem to a mutex [SCSI] qla2xxx: firmware semaphore to mutex [SCSI] qla2xxx: Correct locking within MSI-X interrupt handlers. [SCSI] qla2xxx: Display driver version at module init-time. [SCSI] qla2xxx: Return correct port_type to FC-transport for Vports.
| * [SCSI] qla2xxx: Update version number to 8.02.01-k4.Andrew Vasquez2008-05-301-1/+1
| | | | | | | | | | Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] qla2xxx: Correct handling of AENs postings for vports.Seokmann Ju2008-05-302-6/+9
| | | | | | | | | | | | | | | | | | | | Initialize all proper structure members in order to support work-list vport processing. This code also properly acquires the correct (physical hardware_lock) lock during work submission. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] qla2xxx: Revert "qla2xxx: Use proper HA during asynchronous event ↵Seokmann Ju2008-05-301-26/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | handling." This reverts commit bd2a1846b2313e32d0270151a31a6b8335384a20. The original (prior to the reverted commit) code was correct. Additionally, the vp_idx should be checked during MBA_PORT_UPDATE in order for proper handling to take place for a given vport. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] ibmvscsi: Non SCSI error status fixupBrian King2008-05-272-2/+3
| | | | | | | | | | | | | | | | | | | | Some versions of the Virtual I/O Server on Power return 0x99 in the non-SCSI error status field as success, rather than 0. This fixes the ibmvscsi driver to treat this response as success. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] fix intermittent oops in scsi_bus_ueventJames Bottomley2008-05-231-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reported-by: Sitsofe Wheeler <sitsofe@yahoo.com> > BUG: unable to handle kernel paging request at e6f17fac > IP: [<c02604d6>] scsi_bus_uevent+0x1/0x17 > *pde = 2714b163 *pte = 26f17160 > Oops: 0000 [#1] DEBUG_PAGEALLOC > last sysfs file: > > Pid: 1, comm: swapper Not tainted (2.6.26-rc2-next-20080516skw #30) > EIP: 0060:[<c02604d6>] EFLAGS: 00010282 CPU: 0 > EIP is at scsi_bus_uevent+0x1/0x17 > EAX: e6f18014 EBX: e6f18014 ECX: c02604d5 EDX: e7173000 > ESI: e7173000 EDI: e7173000 EBP: e7851ca0 ESP: e7851c90 > DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 The problem is caused by: commit b0ed43360fdca227048d88a08290365cb681c1a8 Author: Hannes Reinecke <hare@suse.de> Date: Tue Mar 18 14:32:28 2008 +0100 [SCSI] add scsi_host and scsi_target to scsi_bus which added scsi_bus_type to the struct scsi_target device. This causes both the scsi_device and scsi_target to fire scsi_bus_uevents. However, the actualy scsi_bus_uevent() call assumes blindly that it's a struct scsi_device. Check for this and return immediately if it isn't. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] qla2xxx: Update version number to 8.02.01-k3.Andrew Vasquez2008-05-151-1/+1
| | | | | | | | | | Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] qla2xxx: Revert "qla2xxx: Validate mid-layer 'underflow' during ↵Andrew Vasquez2008-05-151-19/+0
| | | | | | | | | | | | | | | | | | | | | | | | check-condition handling." This reverts commit 8084fe168a5252548cdddf2ed181c337fecd0523. The midlayer should be given the oppotunity to interpret the check-condition and based on scsi_cmnd->resid determine if a transfer should be retried or failed. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] qla2xxx: Disable local-interrupts while polling for RISC status.Andrew Vasquez2008-05-151-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Matthew Wilcox <matthew@wil.cx> reported the following lockdep warning: > ================================= > [INFO:inconsistentlockstate] > 2.6.26-rc1-00115-g0340eda-dirty#60 > --------------------------------- > inconsistent{hardirq-on-W}->{in-hardirq-W}usage. > swapper/1[HC1[1]:SC0[0]:HE0:SE1]takes: > (&ha->hardware_lock){+-..},at:[<c035495d>]qla2300_intr_handler+0x35/0x1f5 > {hardirq-on-W}statewasregisteredat: > [<c0139a16>]__lock_acquire+0x459/0xb1d > [<c013a091>]__lock_acquire+0xad4/0xb1d > [<c013a142>]lock_acquire+0x68/0x82 > [<c035495d>]qla2300_intr_handler+0x35/0x1f5 > [<c0506da5>]_spin_lock+0x24/0x4d > [<c035495d>]qla2300_intr_handler+0x35/0x1f5 > [<c035495d>]qla2300_intr_handler+0x35/0x1f5 > [<c01391e4>]trace_hardirqs_on+0xe7/0x10e > [<c034f0a6>]qla2x00_mailbox_command+0x1c6/0x433 ... > other info that might help us debug this: > no locks held by swapper/1. > > stack backtrace: > Pid:1,comm:swapperNottainted2.6.26-rc1-00115-g0340eda-dirty#60 > [<c0138121>]print_usage_bug+0x100/0x10a > [<c0138d37>]mark_lock+0xaa/0x395 > [<c01399af>]__lock_acquire+0x3f2/0xb1d > [<c013a091>]__lock_acquire+0xad4/0xb1d > [<c013a142>]lock_acquire+0x68/0x82 > [<c035495d>]qla2300_intr_handler+0x35/0x1f5 > [<c0506da5>]_spin_lock+0x24/0x4d > [<c035495d>]qla2300_intr_handler+0x35/0x1f5 > [<c035495d>]qla2300_intr_handler+0x35/0x1f5 > [<c014a37b>]handle_IRQ_event+0x13/0x3d > [<c014b366>]handle_fasteoi_irq+0x76/0xab Which shows that lockdep is detecting the driver's interrupt-handler is run in both process and interrupt context with irqs-enabled in the former case. During init-time and error-recovery (after a RISC reset), the driver disables interrupts and 'polls' for completions by calling qla2x00_poll(): static inline void qla2x00_poll(scsi_qla_host_t *ha) { ha->isp_ops->intr_handler(0, ha); } which in-turn calls the ISP registered interrupt handler. This patch corrects it by disabling local interrupts during polling. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] qla2xxx: Extend the 'fw_dump' SYSFS node the ability to initiate a ↵Andrew Vasquez2008-05-153-5/+7
| | | | | | | | | | | | | | | | | | | | firmware dump. The user-initiated dump can be a useful tool in triaging complex ISP and FC issues. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] qla2xxx: Don't depend on mailbox return values while enabling FCE ↵Andrew Vasquez2008-05-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | tracing. Recent firmwares no longer return the 'number of buffers' in mailbox6. The original code may result in a potential panic during a FW-dump process due to the driver misinterpreting the size of the allocated buffer. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] qla2xxx: Convert vport_sem to a mutexmatthias@kaehlcke.net2008-05-155-15/+15
| | | | | | | | | | | | | | | | | | The semaphore vport_sem is used as a mutex. Convert it to the mutex API. Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] qla2xxx: firmware semaphore to mutexDaniel Walker2008-05-151-5/+6
| | | | | | | | | | | | Signed-off-by: Daniel Walker <dwalker@mvista.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] qla2xxx: Correct locking within MSI-X interrupt handlers.Andrew Vasquez2008-05-151-4/+4
| | | | | | | | | | | | | | | | | | Both MSI-X vector handlers attempt to acquire the HA's hardware_lock. This though requires that interrupts be disabled/enabled during acquisition and release of the spinlock. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] qla2xxx: Display driver version at module init-time.Andrew Vasquez2008-05-151-1/+2
| | | | | | | | | | Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] qla2xxx: Return correct port_type to FC-transport for Vports.Shyam Sundar2008-05-151-1/+5
| | | | | | | | | | | | | | For Vports, the port_type should be set to FC_PORTTYPE_NPIV. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* | scsi: fix integer as NULL pointer warningHarvey Harrison2008-05-235-13/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/scsi/aha152x.c:3585:60: warning: Using plain integer as NULL pointer drivers/scsi/aha152x.c:3845:56: warning: Using plain integer as NULL pointer drivers/scsi/qla1280.c:2814:37: warning: Using plain integer as NULL pointer drivers/scsi/atp870u.c:750:47: warning: Using plain integer as NULL pointer drivers/scsi/3w-9xxx.c:1281:36: warning: Using plain integer as NULL pointer drivers/scsi/3w-9xxx.c:1293:36: warning: Using plain integer as NULL pointer drivers/scsi/3w-9xxx.c:1301:35: warning: Using plain integer as NULL pointer drivers/scsi/hptiop.c:447:10: warning: Using plain integer as NULL pointer drivers/scsi/hptiop.c:457:10: warning: Using plain integer as NULL pointer drivers/scsi/hptiop.c:479:24: warning: Using plain integer as NULL pointer drivers/scsi/hptiop.c:483:22: warning: Using plain integer as NULL pointer drivers/scsi/hptiop.c:1213:23: warning: Using plain integer as NULL pointer drivers/scsi/hptiop.c:1214:23: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | MODULE_LICENSE expects "GPL v2", not "GPLv2"Al Viro2008-05-211-1/+1
| | | | | | | | | | | | | | | | ... and we have few enough places using the latter to make it simpler to do search and replace... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | SCSI: fix race in device_createGreg Kroah-Hartman2008-05-204-16/+17
|/ | | | | | | | | | | | | | | | | There is a race from when a device is created with device_create() and then the drvdata is set with a call to dev_set_drvdata() in which a sysfs file could be open, yet the drvdata will be NULL, causing all sorts of bad things to happen. This patch fixes the problem by using the new function, device_create_drvdata(). It fixes the problem in all of the scsi drivers that need it. Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Doug Gilbert <dgilbert@interlog.com> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds2008-05-134-37/+55
|\ | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] qla1280: Fix queue depth problem [SCSI] aha152x: Fix oops on module removal [SCSI] aha152x: fix init suspiciously returned 1, it should follow 0/-E convention [SCSI] libiscsi regression in 2.6.25: fix setting of recv timer [SCSI] libiscsi regression in 2.6.25: fix nop timer handling [SCSI] gdth: fix Error: Driver 'gdth' is already registered, aborting... [SCSI] gdth: fix timer handling
| * [SCSI] qla1280: Fix queue depth problemJeremy Higdon2008-05-131-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The qla1280 driver was ANDing the output value of mailbox register 0 with (1 << target-number) to determine whether to enable queueing on the target in question. But mailbox register 0 has the status code for the mailbox command (in this case, Set Target Parameters). Potential values are: /* * ISP mailbox command complete status codes */ So clearly that is in error. I can't think what the author of that line was looking for in a mailbox register, so I just eliminated the AND. flag is used later in the function, and I think that the later usage was also wrong, though it was used to set values that aren't used. Oh well, an overhaul of this driver is not what I want to do now -- just a bugfix. After the fix, I found that my disks were getting a queue depth of 255, which is far too many. Most SCSI disks are limited to 32 or 64. In any case, there's no point, queueing up a bunch of commands to the adapter that will just result in queue full or starve other targets from being issued commands due to running out of internal memory. So I dropped default queue depth to 32 (from which 1 is subtracted elsewhere, giving net of 31). I tested with a Seagate ST336753LC, and results look good, so I'm satisfied with this patch. Signed-off-by: Jeremy Higdon <jeremy@sgi.com> Acked-by: Jes Sorensen <jes@sgi.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] aha152x: Fix oops on module removalJames Bottomley2008-05-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reported-by: Frank de Jong <frapex@xs4all.nl> > after trying to unload the module: > BUG: unable to handle kernel paging request at 00100100 > IP: [<fb9ff667>] :aha152x:aha152x_exit+0x47/0x6a > *pde = 00000000 > Oops: 0000 [#1] PREEMPT SMP > Modules linked in: aha152x(-) w83781d hwmon_vid tun ne 8390 bonding > usb_storage snd_usb_audio snd_usb_lib snd_rawmidi pwc snd_seq_device > compat_ioctl32 snd_hwdep videodev v4l1_compat 3c59x mii intel_agp > agpgart snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd > > Pid: 2837, comm: rmmod Not tainted (2.6.25.3 #1) > EIP: 0060:[<fb9ff667>] EFLAGS: 00210212 CPU: 0 > EIP is at aha152x_exit+0x47/0x6a [aha152x] > EAX: 00000001 EBX: 000ffdc4 ECX: f7c517a8 EDX: 00000001 > ESI: 00000000 EDI: 00000003 EBP: e7880000 ESP: e7881f58 > DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 > Process rmmod (pid: 2837, ti=e7880000 task=f27eb580 task.ti=e7880000) > Stack: fba03700 c01419d2 31616861 00783235 e795ee70 c0157709 b7f24000 e79ae000 > c0158271 ffffffff b7f25000 e79ae004 e795e370 b7f25000 e795e37c e795e370 > 009ae000 fba03700 00000880 e7881fa8 00000000 bf93ec20 bf93ec20 c0102faa > Call Trace: > [<c01419d2>] sys_delete_module+0x112/0x1a0 > [<c0157709>] remove_vma+0x39/0x50 > [<c0158271>] do_munmap+0x181/0x1f0 > [<c0102faa>] sysenter_past_esp+0x5f/0x85 > [<c0490000>] rsc_parse+0x0/0x3c0 The problem is that the driver calls aha152x_release() under a list_for_each_entry(). Unfortunately, aha152x_release() deletes from the list in question. Fix this by using list_for_each_entry_safe(). Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] aha152x: fix init suspiciously returned 1, it should follow 0/-E ↵James Bottomley2008-05-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | convention Reported-by: Frank de Jong <frapex@xs4all.nl> > [1.] One line summary of the problem: > linux-2.6.25.3, aha152x'->init suspiciously returned 1, it should > follow 0/-E convention. The module / driver works okay. Unloading the > module is impossible. The driver is apparently returning 0 on failure and 1 on success. That's a bit unfortunate. Fix it by altering to -ENODEV and 0. Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] libiscsi regression in 2.6.25: fix setting of recv timerMike Christie2008-05-081-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the ping tmo is longer than the recv tmo then we could miss a window where we were supposed to check the recv tmo. This happens because the ping code will set the next timeout for the ping timeout, and if the ping executes quickly there will be a long chunk of time before the timer wakes up again. This patch has the ping processing code kick off a recv tmo check when getting a nop in response to our ping. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] libiscsi regression in 2.6.25: fix nop timer handlingMike Christie2008-05-081-8/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following patch fixes a bug in the iscsi nop processing. The target sends iscsi nops to ping the initiator and the initiator has to send nops to reply and can send nops to ping the target. In 2.6.25 we moved the nop processing to the kernel to handle problems when the userspace daemon is not up, but the target is pinging us, and to handle when scsi commands timeout, but the transport may be the cause (we can send a nop to check the transport). When we added this code we added a bug where if the transport timer wakes at the exact same time we are supposed to check for a nop timeout we drop the session instead of checking the transport. This patch checks if a iscsi ping is outstanding and if the ping has timed out, to determine if we need to signal a connection problem. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] gdth: fix Error: Driver 'gdth' is already registered, aborting...James Bottomley2008-05-081-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This message appears on modprobe/rmmod/modprobe of the driver. It's caused because if the driver has no instances, it returns an error from gdth_init, which causes the module to fail to load. Unfortunately, the module's pci driver is still registered at this point. Fix this by making gdth behave like a modern driver and insert even if it doesn't find any instances (in case of hot plug or software driven binding). Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] gdth: fix timer handlingJames Bottomley2008-05-081-12/+26
| | | | | | | | | | | | | | | | | | | | | | The global timer handling is problematic in that if someone unbinds a PCI gdth instance, the BUG_ON() in the timer will cause a panic. Fix this by making the timer start and stop depending on whether there are instances present. This should also permit binding and unbinding to work. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* | drivers/scsi/dpt_i2o.c: fix build on alphaAndrew Morton2008-05-082-55/+36
|/ | | | | | | | | | | | | | | | | | | | alpha: drivers/scsi/dpt_i2o.c:1997: error: implicit declaration of function 'adpt_alpha_info' drivers/scsi/dpt_i2o.c: At top level: drivers/scsi/dpt_i2o.c:2032: warning: conflicting types for 'adpt_alpha_info' drivers/scsi/dpt_i2o.c:2032: error: static declaration of 'adpt_alpha_info' follows non-static declaration drivers/scsi/dpt_i2o.c:1997: error: previous implicit declaration of 'adpt_alpha_info' was here Due to a copy-n-paste error in drivers/scsi/dpti.h. Fix that up and remove some of the many daft static-declarations-in-a-header which this driver enjoys. Cc: Miquel van Smoorenburg <miquels@cistron.nl> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* CONFIG_SCSI_MAC_ESP needs CONFIG_SCSI_SPI_ATTRSGeert Uytterhoeven2008-05-051-0/+1
| | | | | | | | The new mac_esp scsi driver needs CONFIG_SCSI_SPI_ATTRS, just like all other drivers using the new esp_scsi core. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds2008-05-0231-264/+787
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: [SCSI] aic94xx: fix section mismatch [SCSI] u14-34f: Fix 32bit only problem [SCSI] dpt_i2o: sysfs code [SCSI] dpt_i2o: 64 bit support [SCSI] dpt_i2o: move from virt_to_bus/bus_to_virt to dma_alloc_coherent [SCSI] dpt_i2o: use standard __init / __exit code [SCSI] megaraid_sas: fix suspend/resume sections [SCSI] aacraid: Add Power Management support [SCSI] aacraid: Fix jbod operations scan issues [SCSI] aacraid: Fix warning about macro side-effects [SCSI] add support for variable length extended commands [SCSI] Let scsi_cmnd->cmnd use request->cmd buffer [SCSI] bsg: add large command support [SCSI] aacraid: Fix down_interruptible() to check the return value correctly [SCSI] megaraid_sas; Update the Version and Changelog [SCSI] ibmvscsi: Handle non SCSI error status [SCSI] bug fix for free list handling [SCSI] ipr: Rename ipr's state scsi host attribute to prevent collisions [SCSI] megaraid_mbox: fix Dell CERC firmware problem
| * [SCSI] aic94xx: fix section mismatchSam Ravnborg2008-05-021-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix following warnings: WARNING: vmlinux.o(.data+0x17aa88): Section mismatch in reference from the variable asd_pcidev_data to the function .devinit.text:asd_aic9410_setup() WARNING: vmlinux.o(.data+0x17aa98): Section mismatch in reference from the variable asd_pcidev_data to the function .devinit.text:asd_aic9410_setup() WARNING: vmlinux.o(.data+0x17aaa8): Section mismatch in reference from the variable asd_pcidev_data to the function .devinit.text:asd_aic9405_setup() asd_pcidev_data is only used by __devinit asd_pci_probe. So mark is const and annotate it __devinitconst to fix the warnings. [akpm@linux-foundation.org: fix warning] Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] u14-34f: Fix 32bit only problemAlan Cox2008-05-021-2/+4
| | | | | | | | | | | | | | Another user of 32bit time Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] dpt_i2o: sysfs codeMiquel van Smoorenburg2008-05-021-0/+26
| | | | | | | | | | | | | | | | | | | | Create a /sys/class/dpt_i2o directory and populate it with dptiN directories. Each dptiN directory contains a "dev" file that makes udev create /dev/dptiN Signed-off-by: Miquel van Smoorenburg <miquels@cistron.nl> Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] dpt_i2o: 64 bit supportMiquel van Smoorenburg2008-05-026-53/+260
| | | | | | | | | | | | | | | | | | | | | | | | This is the code to actually support 64 bit platforms. 64 bit DMA is enabled on both x86_32 PAE and 64 bit platforms. This code is based in part on the unofficial adaptec 64-bit dpt_i2o driver update that I got from Mark Salyzyn at Adaptec. Signed-off-by: Miquel van Smoorenburg <miquels@cistron.nl> Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] dpt_i2o: move from virt_to_bus/bus_to_virt to dma_alloc_coherentMiquel van Smoorenburg2008-05-022-74/+169
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove virt_to_bus/bus_to_virt code from dpt_i2o, and use dma_alloc_coherent() / dma_free_coherent(). This is in preparation of 64-bit support, dma_alloc_coherent() can allocate memory in the lower 32 bits of physical memory which is needed because the HBA only supports message blocks under 4GB This code is based in part on the unofficial adaptec 64-bit dpt_i2o driver update that I got from Mark Salyzyn at Adaptec. Signed-off-by: Miquel van Smoorenburg <miquels@cistron.nl> Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] dpt_i2o: use standard __init / __exit codeMiquel van Smoorenburg2008-05-022-57/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update dpt_i2o.c to use the standard __init / __exit code instead of the legacy '#include "scsi_module.c"' code. This is needed in preparation of 64-bit support. scsi_module.c calls scsi_add_host() with the device pointer set to NULL, and that crashes code like arch/x64/kernel/pci-gart_64.c::need_iommu(). The reboot_notifier code is deleted because it wasn't compiled in ever anyway, and it would be useless to duplicate it in the new code. Signed-off-by: Miquel van Smoorenburg <miquels@cistron.nl> Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] megaraid_sas: fix suspend/resume sectionsJiri Slaby2008-05-021-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | megaraid_sas suspend and resume are inappropriatelly placed in __devinit section. Remove those placements and make the stuff dependent on CONFIG_PM. While at it, mark remove function as __devexit. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: "Yang, Bo" <Bo.Yang@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] aacraid: Add Power Management supportMark Salyzyn2008-05-024-11/+154
| | | | | | | | | | | | | | | | | | | | | | | | | | For firmware that supports the feature(s), add the ability to start or stop an array using the associated SCSI commands, to automatically manage the spin-up of an array on new I/O reporting back the appropriate check conditions and actions in cooperation with the normal timeout mechanisms and enable the blackout period management in the Firmware associated with the background spin-down of the arrays when the Firmware times out and deems the arrays as idle. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] aacraid: Fix jbod operations scan issuesMark Salyzyn2008-05-022-14/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | As JBOD devices (really just Simple Single Drive Volumes exported to the SCSI channel) are managed, they fail to update correctly when the driver triggers a SCSI scan. In addition, the ability to change multiple arrays or JBODs at the same time was resulting in dropped scans, set up a mechanism to issue a list of single target scans on a single configuration change notification from the Firmware. Performed some additional sundry cosmetic code style cleanups. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] aacraid: Fix warning about macro side-effectsMark Salyzyn2008-05-021-2/+2
| | | | | | | | | | | | | | | | On some compile environments, warnings are produced regarding the usage of aac_logical_to_phys macro. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] add support for variable length extended commandsBoaz Harrosh2008-05-023-19/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for variable-length, extended, and vendor specific CDBs to scsi-ml. It is now possible for initiators and ULD's to issue these types of commands. LLDs need not change much. All they need is to raise the .max_cmd_len to the longest command they support (see iscsi patch). - clean-up some code paths that did not expect commands to be larger than 16, and change cmd_len members' type to short as char is not enough. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] Let scsi_cmnd->cmnd use request->cmd bufferBoaz Harrosh2008-05-0210-21/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - struct scsi_cmnd had a 16 bytes command buffer of its own. This is an unnecessary duplication and copy of request's cmd. It is probably left overs from the time that scsi_cmnd could function without a request attached. So clean that up. - Once above is done, few places, apart from scsi-ml, needed adjustments due to changing the data type of scsi_cmnd->cmnd. - Lots of drivers still use MAX_COMMAND_SIZE. So I have left that #define but equate it to BLK_MAX_CDB. The way I see it and is reflected in the patch below is. MAX_COMMAND_SIZE - means: The longest fixed-length (*) SCSI CDB as per the SCSI standard and is not related to the implementation. BLK_MAX_CDB. - The allocated space at the request level - I have audit all ISA drivers and made sure none use ->cmnd in a DMA Operation. Same audit was done by Andi Kleen. (*)fixed-length here means commands that their size can be determined by their opcode and the CDB does not carry a length specifier, (unlike the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly true and the SCSI standard also defines extended commands and vendor specific commands that can be bigger than 16 bytes. The kernel will support these using the same infrastructure used for VARLEN CDB's. So in effect MAX_COMMAND_SIZE means the maximum size command scsi-ml supports without specifying a cmd_len by ULD's Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] aacraid: Fix down_interruptible() to check the return value correctlyMark Salyzyn2008-05-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On Apr 21, 2008, at 8:42 PM, Yinghai Lu wrote: > bisected to: > > commit e6990c6448ca9359b6d4ad027c0a6efbf4379e64 > Author: Mark Salyzyn <Mark_Salyzyn@adaptec.com> > Date: Mon Apr 14 14:20:16 2008 -0400 > > [SCSI] aacraid: Fix down_interruptible() to check the return value The return value for down_interruptible was incorrectly checked! updated patch enclosed. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
OpenPOWER on IntegriCloud