summaryrefslogtreecommitdiffstats
path: root/drivers/scsi
Commit message (Collapse)AuthorAgeFilesLines
* [SCSI] fix ABORTED_COMMAND looping forever problemJames Bottomley2009-02-211-3/+2
| | | | | | | | | | | | | | | | | | | | Instead of terminating after five retries, commands terminated by ABORTED_COMMAND sense are retrying forever. The problem was introduced by: commit b60af5b0adf0da24c673598c8d3fb4d4189a15ce Author: Alan Stern <stern@rowland.harvard.edu> Date: Mon Nov 3 15:56:47 2008 -0500 [SCSI] simplify scsi_io_completion() Which introduced an error whereby ABORTED_COMMAND now gets erroneously retried in scsi_io_completion. Fix this by returning the behaviour back to the default no retry. Reported-by: Sitsofe Wheeler <sitsofe@yahoo.com> Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] sd: revive sd_index_lockTejun Heo2009-02-211-0/+7
| | | | | | | | | | | | | | | Commit f27bac2761cab5a2e212dea602d22457a9aa6943 which converted sd to use ida instead of idr incorrectly removed sd_index_lock around id allocation and free. idr/ida do have internal locks but they protect their free object lists not the allocation itself. The caller is responsible for that. This missing synchronization led to the same id being assigned to multiple devices leading to oops. Reported and tracked down by Stuart Hayes of Dell. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] cxgb3i: update the driver version to 1.0.1Karen Xie2009-02-211-2/+2
| | | | | Signed-off-by: Karen Xie <kxie@chelsio.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] cxgb3i: added missing include in cxgb3i_ddp.hKaren Xie2009-02-211-0/+2
| | | | | | Signed-off-by: Karen Xie <kxie@chelsio.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] cxgb3i: Outgoing pdus need to observe skb's MAX_SKB_FRAGSKaren Xie2009-02-216-112/+205
| | | | | | | | | | | | | Need to make sure the outgoing pdu can fit into a single skb. When calulating the max. outgoing pdu payload size, take into consideration of - data can be held in the skb's fragment list, assume 512 bytes per fragment, and - data can be held in the headroom. Signed-off-by: Karen Xie <kxie@chelsio.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] cxgb3i: added per-task data to track transmit progressKaren Xie2009-02-212-2/+24
| | | | | | | | | added per-task struct cxgb3i_task_data to track the data transmiting progress and the state of the pdus to be transmitted. Signed-off-by: Karen Xie <kxie@chelsio.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] cxgb3i: transmit work-request fixesKaren Xie2009-02-212-53/+121
| | | | | | | | | | | - resize the work-request credit array to be based on skb's MAX_SKB_FRAGS. - split the skb cb into tx and rx portion - increase the default transmit window to 128K. - stop queueing up the outgoing pdus if transmit window is full. Signed-off-by: Karen Xie <kxie@chelsio.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] hptiop: Add new PCI device IDHighPoint Linux Team2009-02-211-0/+1
| | | | | Signed-off-by: HighPoint Linux Team <linux@highpoint-tech.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Update version number to 8.03.00-k3.Andrew Vasquez2009-02-101-1/+1
| | | | | Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Mask out 'reserved' bits while processing FLT regions.Andrew Vasquez2009-02-101-1/+1
| | | | | | | | Bits 31-8 are marked as reserved and should be ignored while interpreting a region's code. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Correct slab-error overwrite during vport creation and deletion.Anirban Chakraborty2009-02-102-8/+7
| | | | | | | | | | The clearing of a vha's req_ques were overrunning during vport creation. During deletion, vport queues should be torn-down after all cleanup has occurred. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Properly acknowledge IDC notification messages.Andrew Vasquez2009-02-106-13/+87
| | | | | | | | | | | | | To ensure smooth operations amongst the FCoE and NIC side components of the ISP81xx chip, the FCoE driver (qla2xxx) must ensure the 10gb NIC driver (qlge) does not timeout waiting for IDC (Inter-Driver Communication) acknowledgments. The acknowledgment requirements are trivial -- a simple mirroring of incoming mailbox registers during the AEN to a process-context capable mailbox command. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Remove interrupt request bit check in the response ↵Anirban Chakraborty2009-02-105-31/+16
| | | | | | | | | | | | | | processing path in multiq mode. Correct response-queue-0 processing by instructing the firmware to run with interrupt-handshaking disabled, similarly to what is now done for all non-0 response queues. Since all response-queues now run in the same mode, the driver no longer needs the hot-path 'is-disabled-HCCR' test. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] lpfc: introduce missing kfreeJulia Lawall2009-02-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Error handling code following a kmalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,l; position p1,p2; expression *ptr != NULL; @@ ( if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S | x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S ) <... when != x when != if (...) { <+...x...+> } x->f = E ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] libiscsi: Fix scsi command timeout oops in iscsi_eh_timed_outMike Christie2009-02-101-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Yanling Qi from LSI found the root cause of the panic, below is his analysis: Problem description: the open iscsi driver installs eh_timed_out handler to the blank_transport_template of the scsi middle level that causes panic of timed out command of other host Here are the details Iscsi Session creation During iscsi session creation time, the iscsi_tcp_session_create() of iscsi_tpc.c will create a scsi-host for the session. See the statement marked with the label A. The statement B replaces the shost->transportt point with a local struct variable. static struct iscsi_cls_session * iscsi_tcp_session_create(struct iscsi_endpoint *ep, uint16_t cmds_max, uint16_t qdepth, uint32_t initial_cmdsn, uint32_t *hostno) { struct iscsi_cls_session *cls_session; struct iscsi_session *session; struct Scsi_Host *shost; int cmd_i; if (ep) { printk(KERN_ERR "iscsi_tcp: invalid ep %p.\n", ep); return NULL; } A shost = iscsi_host_alloc(&iscsi_sht, 0, qdepth); if (!shost) return NULL; B shost->transportt = iscsi_tcp_scsi_transport; shost->max_lun = iscsi_max_lun; Please note the scsi host is allocated by invoking isccsi_host_alloc() in libiscsi.c Polluting the middle level blank_transport_template in iscsi_host_alloc() of libiscsi.c The iscsi_host_alloc() invokes the middle level function scsi_host_alloc() in hosts.c for allocating a scsi_host. Then the statement marked with C assigns the iscsi_eh_cmd_timed_out handler to the eh_timed_out callback function. struct Scsi_Host *iscsi_host_alloc(struct scsi_host_template *sht, int dd_data_size, uint16_t qdepth) { struct Scsi_Host *shost; struct iscsi_host *ihost; shost = scsi_host_alloc(sht, sizeof(struct iscsi_host) + dd_data_size); if (!shost) return NULL; C shost->transportt->eh_timed_out = iscsi_eh_cmd_timed_out; Please note the shost->transport is the middle level blank_transport_template as shown in the code segment below. We see two problems here. 1. iscsi_eh_cmd_timed_out is installed to the blank_transport_template that will cause some body else problem. 2. iscsi_eh_cmd_timed_out will never be invoked when iscsi command gets timeout because the statement B resets the pointer. Middle level blank_transport_template In the middle level function scsi_host_alloc() of hosts.c, the middle level assigns a blank_transport_template for those hosts not implementing its transport layer. All HBAs without supporting a specific scsi_transport will share the middle level blank_transport_template. Please see the statement D struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *sht, int privsize) { struct Scsi_Host *shost; gfp_t gfp_mask = GFP_KERNEL; int rval; if (sht->unchecked_isa_dma && privsize) gfp_mask |= __GFP_DMA; shost = kzalloc(sizeof(struct Scsi_Host) + privsize, gfp_mask); if (!shost) return NULL; shost->host_lock = &shost->default_lock; spin_lock_init(shost->host_lock); shost->shost_state = SHOST_CREATED; INIT_LIST_HEAD(&shost->__devices); INIT_LIST_HEAD(&shost->__targets); INIT_LIST_HEAD(&shost->eh_cmd_q); INIT_LIST_HEAD(&shost->starved_list); init_waitqueue_head(&shost->host_wait); mutex_init(&shost->scan_mutex); shost->host_no = scsi_host_next_hn++; /* XXX(hch): still racy */ shost->dma_channel = 0xff; /* These three are default values which can be overridden */ shost->max_channel = 0; shost->max_id = 8; shost->max_lun = 8; /* Give each shost a default transportt */ D shost->transportt = &blank_transport_template; Why we see panic at iscsi_eh_cmd_timed_out() The mpp virtual HBA doesn’t have a specific scsi_transport. Therefore, the blank_transport_template will be assigned to the virtual host of the MPP virtual HBA by SCSI middle level. Please note that the statement C has assigned iscsi-transport eh_timedout handler to the blank_transport_template. When a mpp virtual command gets timedout, the iscsi_eh_cmd_timed_out() will be invoked to handle mpp virtual command timeout from the middle level scsi_times_out() function of the scsi_error.c. enum blk_eh_timer_return scsi_times_out(struct request *req) { struct scsi_cmnd *scmd = req->special; enum blk_eh_timer_return (*eh_timed_out)(struct scsi_cmnd *); enum blk_eh_timer_return rtn = BLK_EH_NOT_HANDLED; scsi_log_completion(scmd, TIMEOUT_ERROR); if (scmd->device->host->transportt->eh_timed_out) E eh_timed_out = scmd->device->host->transportt->eh_timed_out; else if (scmd->device->host->hostt->eh_timed_out) eh_timed_out = scmd->device->host->hostt->eh_timed_out; else eh_timed_out = NULL; if (eh_timed_out) { rtn = eh_timed_out(scmd); It is very easy to understand why we get panic in the iscsi_eh_cmd_timed_out(). A scsi_cmnd from a no-iscsi device definitely can not resolve out a session and session->lock. The panic can be happed anywhere during the differencing. static enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *scmd) { struct iscsi_cls_session *cls_session; struct iscsi_session *session; struct iscsi_conn *conn; enum blk_eh_timer_return rc = BLK_EH_NOT_HANDLED; cls_session = starget_to_session(scsi_target(scmd->device)); session = cls_session->dd_data; debug_scsi("scsi cmd %p timedout\n", scmd); spin_lock(&session->lock); This patch fixes the problem by moving the setting of the iscsi_eh_cmd_timed_out to iscsi_add_host, which is after the LLDs have set their transport template to shost->transportt. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: fix Kernel Panic with Qlogic 2472 Card.Shyam_Iyer@Dell.com2009-02-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Kernel Panic is observed with a Qlogic 2472 Card is plugged into the system and the qla2xxx driver is loaded: QLogic Fibre Channel HBA Driver: 8.02.01.02.11.0-k9 vendor=8086 device=3410 qla2xxx 0000:05:00.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40 qla2xxx 0000:05:00.0: Found an ISP2432, irq 40, iobase 0xffffc2001091c000 qla2xxx 0000:05:00.0: Configuring PCI space... qla2xxx 0000:05:00.0: setting latency timer to 64 qla2xxx 0000:05:00.0: Configure NVRAM parameters... BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 IP: [<ffffffff8036319a>] strncpy+0x5/0x1e PGD 7c564067 PUD 78d8c067 PMD 0 Oops: 0000 [1] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.1/input/input4/event 4/dev CPU 1 Modules linked in: qla2xxx(+) squashfs usb_storage scsi_transport_fc scsi_tgt parport_pc parport arc4 ecb crypto_blkcipher acpi_cpufreq fan loop nfs nfs_acl lockd sunrpc nls_iso8859_1 nls_cp437 ipv6 af_packet st sr_mod ide_disk ide_cd_mod ide_core cdrom usbhid hid ff_memless sg sd_mod crc_t10dif uhci_hcd mptsas mptscsih ehci_hcd mptbase scsi_transport_sas rtc_cmos rtc_core rtc_lib usbcore scsi_mod thermal bnx2 button processor thermal_sys hwmon edd Supported: Yes Pid: 4415, comm: insmod Not tainted 2.6.27.13-1-default #1 RIP: 0010:[<ffffffff8036319a>] [<ffffffff8036319a>] strncpy+0x5/0x1e RSP: 0018:ffff88007b04fbc0 EFLAGS: 00010202 RAX: 00000000000000b7 RBX: ffff88007b9641e0 RCX: ffff88007c1b2ad7 RDX: 000000000000004f RSI: 0000000000000000 RDI: ffff88007c1b2ad7 RBP: ffff88007c1b0620 R08: 0000000000000010 R09: 0000000100000000 R10: 0000000000000046 R11: ffffffff803651c6 R12: ffff88007b074000 R13: ffff88007b964000 R14: ffff88007c1b2ac6 R15: 0000000000000000 FS: 00007f91a6c366f0(0000) GS:ffff88007dbeee40(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 000000007bd7c000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process insmod (pid: 4415, threadinfo ffff88007b04e000, task ffff880078586180) Stack: ffffffffa02d82c4 0000000000002432 ffff88007d385000 ffff88007c1b0620 ffff88007c1b0620 ffff88007c1b0000 ffff88007d385000 0000000000002432 ffffffffa02dcb1e 0000000000002432 ffffc2001091c000 ffff88007c1b0620 Call Trace: [<ffffffffa02d82c4>] qla24xx_nvram_config+0x385/0x6c2 [qla2xxx] [<ffffffffa02dcb1e>] qla2x00_initialize_adapter+0x169/0x383 [qla2xxx] [<ffffffffa02f2040>] qla2x00_probe_one+0x6bc/0x9c6 [qla2xxx] [<ffffffff8037346f>] pci_device_probe+0xb8/0x105 [<ffffffff803e5a27>] really_probe+0xdd/0x1e5 [<ffffffff803e5c14>] __driver_attach+0x46/0x6d [<ffffffff803e51e1>] bus_for_each_dev+0x44/0x78 [<ffffffff803e4ac7>] bus_add_driver+0xef/0x235 [<ffffffff803e5dd8>] driver_register+0xa2/0x11f [<ffffffff803736fd>] __pci_register_driver+0x5d/0x90 [<ffffffffa0308126>] qla2x00_module_init+0x126/0x159 [qla2xxx] [<ffffffff80209041>] _stext+0x41/0x110 [<ffffffff80260abd>] sys_init_module+0xa0/0x1ba [<ffffffff8020bfbb>] system_call_fastpath+0x16/0x1b [<00007f91a679b76a>] 0x7f91a679b76a Code: ff c1 41 39 c0 75 05 45 85 c0 75 bf 41 29 c0 44 89 c0 c3 31 d2 8a 04 16 88 04 17 48 ff c2 84 c0 75 f3 48 89 f8 c3 48 89 f9 eb 10 <8a> 06 3c 01 88 01 48 83 de ff 48 ff c1 48 ff ca 48 85 d2 75 eb RIP [<ffffffff8036319a>] strncpy+0x5/0x1e RSP <ffff88007b04fbc0> CR2: 0000000000000000 ---[ end trace 829d7d78dfafb785 ]--- The attached patch fixes the issue. Signed-off-by: Shyam Iyer <shyam_iyer@dell.com> Acked-by: Seokmann Ju <Seokmann.ju@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] ibmvfc: Increase cancel timeoutBrian King2009-02-101-1/+1
| | | | | | | | | | | During cancel testing it has been shown that 15 seconds is not nearly long enough for the VIOS to respond to a cancel under loaded situations. Increasing this timeout to 60 seconds allows time for the VIOS to cancel the outstanding commands and prevents us from escalating to a full host reset, which can take much longer. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] ibmvfc: Fix rport reloginBrian King2009-02-101-1/+11
| | | | | | | | | | | | | | The ibmvfc driver has a bug in its SCN handling. If it receives an ELS event such asn an N-Port SCN event or an unsolicited PLOGI, or any other SCN event which causes ibmvfc_reinit_host to be called, it is possible that we will call fc_remote_port_add for a target that already has an rport added, which can result in duplicate rports getting created for the same targets. Fix this by calling fc_remote_port_rolechg in this scenario instead to report any possible role change that may have occurred. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] ibmvfc: Fix command timeout errorsBrian King2009-02-101-3/+0
| | | | | | | | | | | | Currently the ibmvfc driver sets the IBMVFC_CLASS_3_ERR flag in the VFC Frame if both the adapter and the device claim support for Class 3. However, this bit actually refers to Class 3 Error Recovery, which is currently not supported by the VIOS. Setting this bit can cause lots of command timeout responses from the VIOS resulting in general instability. Fix this by never setting this bit. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] sg: fix device number in blktrace dataMartin Peschke2009-02-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Hi, we have run into an issue with blktrace being started for sg devices. Please apply. Thanks, Martin From: Martin Peschke <mpeschke@linux.vnet.ibm.com> The device number denoting a generic SCSI devices (sg) in a blktrace trace is broken; major and minor are always 0. It looks like sdp->device->sdev_gendev.devt is not initialized properly. The fix below uses other data to make up a valid device number, similar to the way an sg device number is generated for sysfs output. Reported-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] scsi_scan: add missing interim SDEV_DEL state if slave_alloc failsJames Smart2009-02-101-0/+1
| | | | | | | | | | | | | | | We were running i/o and performing a bunch of hba resets in a loop. This forces a lot of target removes and then rescans. Since the resets are occuring during scan it's causing the scan i/o to timeout, invoking error recovery, etc. We end up getting some nasty crashing in scsi_scan.c due to references to old sdevs that are failing but had some lingering references that kept them around. Fix by setting device state to SDEV_DEL if the LLD's slave_alloc fails. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] ibmvscsi: Correct DMA mapping leakRobert Jennings2009-02-101-0/+1
| | | | | | | | | | | | The ibmvscsi client driver is not unmapping the SCSI command after encountering a DMA mapping error while trying to map an indirect scattergather list for the event pool. This leads to a leak of DMA entitlement that could result in the device failing future DMA operations in a CMO environment. Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] ibmvfc: Fix DMA mapping leak on memory allocation failureBrian King2009-01-251-1/+3
| | | | | | | | | | | | There is currently a DMA mapping leak that can occur in the ibmvfc driver if we fail to allocate a scatterlist. Fix this by unmapping the scatterlist in the failure path. Additionally, only log an error for a scatterlist allocation failure if the log level is greater than the default, since this can occur when running Active Memory Sharing and this is not considered an error. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Update version number to 8.03.00-k2.Andrew Vasquez2009-01-251-1/+1
| | | | | Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Add checks for a valid fcport in ↵Seokmann Ju2009-01-251-0/+6
| | | | | | | | | | | | | | | | dev-loss-tmo/terminate_rport_io callbacks. Commit f78badb1ae07e7f8b835ab2ea0b456ed3fc4caf4 ([SCSI] fc transport: pre-emptively terminate i/o upon dev_loss_tmo timeout) changed the callback semantics of dev_loss_tmo and terminate_rport_io such that repeated calls could be made. This could result in the the driver using stale (NULLed-out, in dev_loss_tmo) data from the rport. Correct this by addint a simple check to ensure a valid fcport is attached. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Correct regression in DMA-mask setting prior to allocations.Andrew Vasquez2009-01-251-6/+2
| | | | | | | | | | | | Jeremy Higdon noted (http://marc.info/?l=linux-scsi&m=123262143131788&w=2) that the rework done in commit e315cd28b9ef0d7b71e462ac16e18dbaa2f5adfe was not setting the proper consistent and streaming DMA masks prior to memory allocations. Correct this and remove the unnecessary prototype. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Correct descriptions in flash manipulation routines.Joe Carnuccio2009-01-251-3/+3
| | | | | | | | | | | | | | | | When clearing the flash device's SR, the comment is incorrect... clearing the SR is 2 steps: 1. the SR protect bit is 1, so the first write zero clears only that bit, 2. the SR protect bit is now 0, so the next write zero clears the remaining bits. The sector erase debug print more correctly identifies that the erase failed. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Correct regression in EH abort handling.Andrew Vasquez2009-01-251-0/+1
| | | | | | | | | | Commit 73208dfd7ab19f379d73e8a0fbf30f92c203e5e8 (qla2xxx: add support for multi-queue adapter) inadvertently backed-out the fix in 5bff55db3dc4d659f46b4d2fce2f61c1964c2762 (qla2xxx: Return a FAILED status when abort mailbox-command fails.). Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Correct endianness issue during flash manipulation.Andrew Vasquez2009-01-251-5/+2
| | | | | | | | | The flash data was incorrectly being converted (cpu_to_le32()) when using the bulk-flash-write mailbox command (ISP25xx and above). Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Correct MSI-X vector allocation for single queue mode.Lalit Chandivade2009-01-251-0/+5
| | | | | Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Modify firmware-load order precedence for ISP81XX parts.Andrew Vasquez2009-01-253-7/+46
| | | | | | | | | | | | | | Pre-ISP81XX parts (including ISP24xx and ISP25xx) could contain a firmware image within a segment of flash, driver would fallback to loading this firmware if the request-firmware interface failed (userspace .bin file). Moving forward, all ISP81XX parts will ship with a suggested-to-be-used firmware image within flash which all driver should first attempt to load. If the flash firmware load fails, the driver will then fallback to loading firmware via the request-firmware interface (ql8100_fw.bin). Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Always serialize mailbox command execution.Andrew Vasquez2009-01-251-10/+6
| | | | | | | | | | | Original code would incorrectly bypass serialization if the DPC thread were performing a big-hammer operation (ISP abort). This short circuit, though rare, would subsequently stomp on a secondary thread's mailbox command execution. Found during ISP81XX testing. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Ensure RISC-interrupt-enabled consistency for ↵Andrew Vasquez2009-01-251-0/+3
| | | | | | | | | | IS_NOPOLLING_TYPE() ISPs. Original code should work as well given qla24xx_reset_adapter() is only called in extreme cases where the HBA is taken offline. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Simplify sector-mask calculation in preparation for larger ↵Andrew Vasquez2009-01-251-6/+4
| | | | | | | | | flash parts. Also removes unneeded 'findex' local variable within routine. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Fix memory leak in error pathAnirban Chakraborty2009-01-251-3/+8
| | | | | | Reviewed-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla4xxx: do not reuse session when connecting to different target portMike Christie2009-01-252-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | qla4xxx does not check the I_T nexus values correctly so it ends up creating one session to the target. If a portal should disappear or they should be reported in different order the driver will think it is already logged in when it could now be speaking to a different target portal or accessing it through a different initiator port (iscsi initiator port is not tied to hardware and is just the initiator name plus isid so you could end up with multiple ports through one host). This patch has the driver check the iscsi scsi port values when matching sessions (we do not check the initiator name because that is static). It results in a portal from each target portal group getting logged into instead of just one per target. In the future the firmware should hopefully send us notification of other sessions that are created to other portals within the same tpgt and the sessions should have different isids. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] libiscsi: fix iscsi pool leakMike Christie2009-01-251-0/+1
| | | | | | | | | | | I am not sure what happened. It looks like we have always leaked the q->queue that is allocated from the kfifo_init call. nab finally noticed that we were leaking and this patch fixes it by adding a kfree call to iscsi_pool_free. kfifo_free is not used per kfifo_init's instructions to use kfree. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* Merge branch 'merge' of ↵Linus Torvalds2009-01-163-13/+13
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: serial: Add 16850 uart type support to OF uart driver hvc_console: Remove tty->low_latency powerpc: Get the number of SLBs from "slb-size" property powerpc: is_hugepage_only_range() must account for both 4kB and 64kB slices powerpc/ps3: printing fixups for l64 to ll64 conversion drivers/video powerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/scsi powerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/ps3 powerpc/ps3: Printing fixups for l64 to ll64 conversion sound/ppc powerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/char powerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/block powerpc/ps3: Printing fixups for l64 to ll64 conversion arch/powerpc powerpc/ps3: ps3_repository_read_mm_info() takes u64 * arguments powerpc/ps3: clear_bit()/set_bit() operate on unsigned longs powerpc/ps3: The lv1_ routines have u64 parameters powerpc/ps3: Use dma_addr_t down through the stack powerpc/ps3: set_dabr() takes an unsigned long powerpc: Cleanup from l64 to ll64 change drivers/scsi
| * powerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/scsiStephen Rothwell2009-01-161-3/+3
| | | | | | | | | | | | Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * powerpc: Cleanup from l64 to ll64 change drivers/scsiStephen Rothwell2009-01-162-10/+10
| | | | | | | | | | | | | | This is a powerpc specific driver. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* | Merge branch 'upstream-linus' of ↵Linus Torvalds2009-01-162-2/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: sata_fsl: Return non-zero on error in probe() drivers/ata/pata_ali.c: s/isa_bridge/ali_isa_bridge/ to fix alpha build libata: New driver for OCTEON SOC Compact Flash interface (v7). libata: Add another column to the ata_timing table. sata_via: Add VT8261 support pata_atiixp: update port enabledness test handling [libata] get-identity ioctl: Fix use of invalid memory pointer
| * | [libata] get-identity ioctl: Fix use of invalid memory pointerJeff Garzik2009-01-162-2/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | for SAS drivers. Caught by Ke Wei (and team?) at Marvell. Also, move the ata_scsi_ioctl export to libata-scsi.c, as that seems to be the general trend. Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds2009-01-166-29/+46
|\ \ | |/ |/| | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] Skip deleted devices in __scsi_device_lookup_by_target() [SCSI] Add SUN Universal Xport to no attach blacklist [SCSI] iscsi_tcp: make padbuf non-static [SCSI] mpt fusion: Add Firmware debug support [SCSI] mpt fusion: Add separate msi enable disable for FC,SPI,SAS [SCSI] mpt fusion: Update MPI Headers to version 01.05.19 [SCSI] qla2xxx: Fix ISP restart bug in multiq code
| * [SCSI] Skip deleted devices in __scsi_device_lookup_by_target()Hannes Reinecke2009-01-131-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | __scsi_device_lookup_by_target() will always return the first sdev with a matching LUN, regardless of the state. However, when this sdev is in SDEV_DEL scsi_device_lookup_by_target() will ignore this device and so any valid device on the list after the deleted device will never be found. So we have to modify __scsi_device_lookup_by_target() to skip any device in SDEV_DEL. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] Add SUN Universal Xport to no attach blacklistILLES, Marton2009-01-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I was using a Sun ST2510 device (iSCSI) and a special "block device" appeared which is used by SUN Common Array Manager in-band management. However it also appeared as a block device and caused some IO error: [ 716.868000] scsi 15:0:0:31: Direct-Access SUN Universal Xport 0735 PQ: 0 ANSI: 5 [ 716.868000] qla4xxx 0000:04:01.1: scsi(15:0:0:31): Enabled tagged queuing, queue depth 32. [ 716.868000] sd 15:0:0:31: [sdf] 40960 512-byte hardware sectors (21 MB) [ 716.868000] sd 15:0:0:31: [sdf] Write Protect is off [ 716.868000] sd 15:0:0:31: [sdf] Mode Sense: 77 00 10 08 [ 716.868000] sd 15:0:0:31: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 716.868000] sd 15:0:0:31: [sdf] 40960 512-byte hardware sectors (21 MB) [ 716.868000] sd 15:0:0:31: [sdf] Write Protect is off [ 716.868000] sd 15:0:0:31: [sdf] Mode Sense: 77 00 10 08 [ 716.872000] sd 15:0:0:31: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 716.872000] sdf: unknown partition table [ 716.932000] sd 15:0:0:31: [sdf] Attached SCSI disk [ 716.932000] sd 15:0:0:31: Attached scsi generic sg6 type 0 [ 717.412000] end_request: I/O error, dev sdf, sector 40 [ 717.412000] Buffer I/O error on device sdf, logical block 5 [ 717.412000] Buffer I/O error on device sdf, logical block 6 [ 717.412000] Buffer I/O error on device sdf, logical block 7 [ 717.412000] Buffer I/O error on device sdf, logical block 8 [ 717.412000] Buffer I/O error on device sdf, logical block 9 [ 717.412000] Buffer I/O error on device sdf, logical block 10 [ 717.412000] Buffer I/O error on device sdf, logical block 11 [ 717.412000] Buffer I/O error on device sdf, logical block 12 [ 717.412000] Buffer I/O error on device sdf, logical block 13 [ 717.412000] Buffer I/O error on device sdf, logical block 14 After some googling it appeared that similar issue has been solved for SGI/IBM devices in 4869040512082b761de2d7c35975d01044f8bfea, so here is the patch for SUN, please apply. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] iscsi_tcp: make padbuf non-staticKaren Xie2009-01-131-2/+1
| | | | | | | | | | | | | | | | | | | | virt_to_page() call should not be used on kernel text and data addresses. virt_to_page() is used by sg_init_one(). So change padbuf to be allocated within iscsi_segment. Signed-off-by: Karen Xie <kxie@chelsio.com> Acked-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] qla2xxx: Fix ISP restart bug in multiq codeAnirban Chakraborty2009-01-133-26/+40
| | | | | | | | | | | | | | | | | | After restarting ISP the additional queues are not being setup correctly. The following patch fixes the issue. Please apply. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* | powerpc: Change u64/s64 to a long long integer typeIngo Molnar2009-01-131-6/+6
|/ | | | | | | | | | | | | | | | | | | | | | Convert arch/powerpc/ over to long long based u64: -#ifdef __powerpc64__ -# include <asm-generic/int-l64.h> -#else -# include <asm-generic/int-ll64.h> -#endif +#include <asm-generic/int-ll64.h> This will avoid reoccuring spurious warnings in core kernel code that comes when people test on their own hardware. (i.e. x86 in ~98% of the cases) This is what x86 uses and it generally helps keep 64-bit code 32-bit clean too. [Adjusted to not impact user mode (from paulus) - sfr] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds2009-01-0857-830/+1809
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (45 commits) [SCSI] qla2xxx: Update version number to 8.03.00-k1. [SCSI] qla2xxx: Add ISP81XX support. [SCSI] qla2xxx: Use proper request/response queues with MQ instantiations. [SCSI] qla2xxx: Correct MQ-chain information retrieval during a firmware dump. [SCSI] qla2xxx: Collapse EFT/FCE copy procedures during a firmware dump. [SCSI] qla2xxx: Don't pollute kernel logs with ZIO/RIO status messages. [SCSI] qla2xxx: Don't fallback to interrupt-polling during re-initialization with MSI-X enabled. [SCSI] qla2xxx: Remove support for reading/writing HW-event-log. [SCSI] cxgb3i: add missing include [SCSI] scsi_lib: fix DID_RESET status problems [SCSI] fc transport: restore missing dev_loss_tmo callback to LLDD [SCSI] aha152x_cs: Fix regression that keeps driver from using shared interrupts [SCSI] sd: Correctly handle 6-byte commands with DIX [SCSI] sd: DIF: Fix tagging on platforms with signed char [SCSI] sd: DIF: Show app tag on error [SCSI] Fix error handling for DIF/DIX [SCSI] scsi_lib: don't decrement busy counters when inserting commands [SCSI] libsas: fix test for negative unsigned and typos [SCSI] a2091, gvp11: kill warn_unused_result warnings [SCSI] fusion: Move a dereference below a NULL test ... Fixed up trivial conflict due to moving the async part of sd_probe around in the async probes vs using dev_set_name() in naming.
| * [SCSI] qla2xxx: Update version number to 8.03.00-k1.Andrew Vasquez2009-01-071-3/+3
| | | | | | | | | | Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
OpenPOWER on IntegriCloud