summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/scsi_error.c
Commit message (Collapse)AuthorAgeFilesLines
* [SCSI] Fix out of spec CD-ROM problem with media changeTARUISI Hiroaki2011-08-271-2/+10
| | | | | | | | | | | Some CD-ROMs fail to report a media change correctly. The specific one for this patch simply fails to respond to commands, then gives a UNIT ATTENTION after being reset which returns ASC/ASCQ 28/00. This is out of spec behaviour, but add a check in the eat CC/UA on reset path to catch this case so the CD-ROM will function somewhat properly. [jejb: fixed up white space and accepted without signoff] Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] Reduce error recovery time by reducing use of TURsDavid Jeffery2011-05-241-20/+67
| | | | | | | | | | | | | | | | | | | | | In error recovery, most scsi error recovery stages will send a TUR command for every bad command when a driver's error handler reports success. When several bad commands to the same device, this results in a device being probed multiple times. This becomes very problematic if the device or connection is in a state where the device still doesn't respond to commands even after a recovery function returns success. The error handler must wait for the test commands to time out. The time waiting for the redundant commands can drastically lengthen error recovery. This patch alters the scsi mid-layer's error routines to send test commands once per device instead of once per bad command. This can drastically lower error recovery time. [jejb: fixed up whitespace and formatting] Signed-of-by: David Jeffery <djeffery@redhat.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
* [SCSI] Log thin provisioning threshold eventShyam Iyer2011-04-151-0/+6
| | | | | | | | | At least log the message that we received a THIN PROVISIONING SOFT THRESHOLD REACHED Unit Attention. Also added it to unit attention decodes. Signed-off-by: Shyam Iyer <shyam_iyer@dell.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* Reduce sequential pointer derefs in scsi_error.c and reduce size as wellJesper Juhl2011-03-211-45/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch reduces the number of sequential pointer derefs in drivers/scsi/scsi_error.c This has been submitted a number of times over a couple of years. I believe this version adresses all comments it has gathered over time. Please apply or reject with a reason. The benefits are: - makes the code easier to read. Lots of sequential derefs of the same pointers is not easy on the eye. - theoretically at least, just dereferencing the pointers once can allow the compiler to generally slightly faster code, so in theory this could also be a micro speed optimization. - reduces size of object file (tiny effect: on x86-64, in at least one configuration, the text size decreased from 9439 bytes to 9400) - removes some pointless (mostly trailing) whitespace. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [SCSI] Add detailed SCSI I/O errorsHannes Reinecke2011-02-121-7/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of just passing 'EIO' for any I/O error we should be notifying the upper layers with more details about the cause of this error. Update the possible I/O errors to: - ENOLINK: Link failure between host and target - EIO: Retryable I/O error - EREMOTEIO: Non-retryable I/O error - EBADE: I/O error restricted to the I_T_L nexus 'Retryable' in this context means that an I/O error _might_ be restricted to the I_T_L nexus (vulgo: path), so retrying on another nexus / path might succeed. 'Non-retryable' in general refers to a target failure, so this error will always be generated regardless of the I_T_L nexus it was send on. I/O errors restricted to the I_T_L nexus might be retried on another nexus / path, but they should _not_ be queued if no paths are available. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] fix id computation in scsi_eh_target_reset()James Bottomley2010-12-211-36/+25
| | | | | | | | | | | | | The current code in scsi_eh_target_reset() has an off by one error that actually sends spurious extra resets. Since there's no real need to reset the targets in numerical order, simply chunk up the command recovery list doing target resets and pulling matching targets out of the list (that also makes the loop O(N) instead of O(N^2). [mike christie found and fixed a list_splice -> list_splice_init problem] Reported-by: Hillf Danton<dhillf@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] Eliminate error handler overload of the SCSI serial numberJames Bottomley2010-12-091-24/+2
| | | | | | | | | | | | | | | | | | The error handler is using the test cmd->serial_number == 0 in the abort routines to signal that the command to be aborted has already completed normally. This design was to close a race window in the original error handler where a command could go through the normal completion routines after it timed out but before error handling was started. Mike Anderson pointed out that when we converted our timeout and softirq completions, we picked up atomicity here because the block layer now mediates this with the REQ_ATOM_COMPLETE flag and guarantees that *either* the command times out or our done routine is called, but ensures we can't get both occurring. That makes the serial number zero check redundant and it can be removed. Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* SCSI host lock push-downJeff Garzik2010-11-161-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | Move the mid-layer's ->queuecommand() invocation from being locked with the host lock to being unlocked to facilitate speeding up the critical path for drivers who don't need this lock taken anyway. The patch below presents a simple SCSI host lock push-down as an equivalent transformation. No locking or other behavior should change with this patch. All existing bugs and locking orders are preserved. Additionally, add one parameter to queuecommand, struct Scsi_Host * and remove one parameter from queuecommand, void (*done)(struct scsi_cmnd *) Scsi_Host* is a convenient pointer that most host drivers need anyway, and 'done' is redundant to struct scsi_cmnd->scsi_done. Minimal code disturbance was attempted with this change. Most drivers needed only two one-line modifications for their host lock push-down. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* block: remove REQ_HARDBARRIERChristoph Hellwig2010-11-101-13/+5
| | | | | | | | | | | | | | | | | | | | REQ_HARDBARRIER is dead now, so remove the leftovers. What's left at this point is: - various checks inside the block layer. - sanity checks in bio based drivers. - now unused bio_empty_barrier helper. - Xen blockfront use of BLKIF_OP_WRITE_BARRIER - it's dead for a while, but Xen really needs to sort out it's barrier situaton. - setting of ordered tags in uas - dead code copied from old scsi drivers. - scsi different retry for barriers - it's dead and should have been removed when flushes were converted to FS requests. - blktrace handling of barriers - removed. Someone who knows blktrace better should add support for REQ_FLUSH and REQ_FUA, though. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds2010-08-141-4/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (28 commits) [SCSI] qla4xxx: fix compilation warning [SCSI] make error handling more robust in the face of reservations [SCSI] tgt: fix warning [SCSI] drivers/message/fusion: Adjust confusing if indentation [SCSI] Return NEEDS_RETRY for eh commands with status BUSY [SCSI] ibmvfc: Driver version 1.0.9 [SCSI] ibmvfc: Fix terminate_rport_io [SCSI] ibmvfc: Fix rport add/delete race resulting in oops [SCSI] lpfc 8.3.16: Change LPFC driver version to 8.3.16 [SCSI] lpfc 8.3.16: FCoE Discovery and Failover Fixes [SCSI] lpfc 8.3.16: SLI Additions, updates, and code cleanup [SCSI] pm8001: introduce missing kfree [SCSI] qla4xxx: Update driver version to 5.02.00-k3 [SCSI] qla4xxx: Added AER support for ISP82xx [SCSI] qla4xxx: Handle outstanding mbx cmds on hung f/w scenarios [SCSI] qla4xxx: updated mbx_sys_info struct to sync with FW 4.6.x [SCSI] qla4xxx: clear AF_DPC_SCHEDULED flage when exit from do_dpc [SCSI] qla4xxx: Stop firmware before doing init firmware. [SCSI] qla4xxx: Use the correct request queue. [SCSI] qla4xxx: set correct value in sess->recovery_tmo ...
| * [SCSI] make error handling more robust in the face of reservationsJames Bottomley2010-08-111-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 5f91bb050ecc4ff1d8d3d07edbe550c8f431c5e1 Author: Michael Reed <mdr@sgi.com> Date: Mon Aug 10 11:59:28 2009 -0500 [SCSI] reservation conflict after timeout causes device to be taken offline Flipped us from always returning failed to always returning success in the name of fixing the problem where reservation conflict returns from test unit ready cause the device always to be taken offline. Unfortuantely, it also introduced a problem whereby for commands other than test unit ready, the eh dispatcher thinks they succeeded when reservation conflict is returned, whereas in reality they failed. Fix this by only returning success for the test unit ready case. Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] Return NEEDS_RETRY for eh commands with status BUSYHannes Reinecke2010-08-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | When the transport is busy and we're sending an EH command drivers occasionally return 'BUSY'. As this in most cases is the TUR command sent as part of the error recovery this is a sure way to make the error recovery escalate. Returning 'NEEDS_RETRY' here will just retry the TUR command and eventually abort the original command, thus making error handling far smoother. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | Merge branch 'for-2.6.36' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds2010-08-101-5/+7
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block: (149 commits) block: make sure that REQ_* types are seen even with CONFIG_BLOCK=n xen-blkfront: fix missing out label blkdev: fix blkdev_issue_zeroout return value block: update request stacking methods to support discards block: fix missing export of blk_types.h writeback: fix bad _bh spinlock nesting drbd: revert "delay probes", feature is being re-implemented differently drbd: Initialize all members of sync_conf to their defaults [Bugz 315] drbd: Disable delay probes for the upcomming release writeback: cleanup bdi_register writeback: add new tracepoints writeback: remove unnecessary init_timer call writeback: optimize periodic bdi thread wakeups writeback: prevent unnecessary bdi threads wakeups writeback: move bdi threads exiting logic to the forker thread writeback: restructure bdi forker loop a little writeback: move last_active to bdi writeback: do not remove bdi from bdi_list writeback: simplify bdi code a little writeback: do not lose wake-ups in bdi threads ... Fixed up pretty trivial conflicts in drivers/block/virtio_blk.c and drivers/scsi/scsi_error.c as per Jens.
| * scsi: use REQ_TYPE_FS for flush requestFUJITA Tomonori2010-08-071-15/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | scsi-ml uses REQ_TYPE_BLOCK_PC for flush requests from file systems. The definition of REQ_TYPE_BLOCK_PC is that we don't retry requests even when we can (e.g. UNIT ATTENTION) and we send the response to the callers (then the callers can decide what they want). We need a workaround such as the commit 77a4229719e511a0d38d9c355317ae1469adeb54 to retry BLOCK_PC flush requests. We will need the similar workaround for discard requests too since SCSI-ml handle them as BLOCK_PC internally. This uses REQ_TYPE_FS for flush requests from file systems instead of REQ_TYPE_BLOCK_PC. scsi-ml retries only REQ_TYPE_FS requests that have data to transfer when we can retry them (e.g. UNIT_ATTENTION). However, we also need to retry REQ_TYPE_FS requests without data because the callers don't. This also changes scsi_check_sense() to retry all the REQ_TYPE_FS requests when appropriate. Thanks to scsi_noretry_cmd(), REQ_TYPE_BLOCK_PC requests don't be retried as before. Note that basically, this reverts the commit 77a4229719e511a0d38d9c355317ae1469adeb54 since now we use REQ_TYPE_FS for flush requests. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
| * block: remove wrappers for request type/flagsChristoph Hellwig2010-08-071-5/+5
| | | | | | | | | | | | | | | | | | Remove all the trivial wrappers for the cmd_type and cmd_flags fields in struct requests. This allows much easier grepping for different request types instead of unwinding through macros. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* | [SCSI] implement runtime Power ManagementAlan Stern2010-07-281-1/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1398b) adds runtime PM support to the SCSI layer. Only the machanism is provided; use of it is up to the various high-level drivers, and the patch doesn't change any of them. Except for sg -- the patch expicitly prevents a device from being runtime-suspended while its sg device file is open. The implementation is simplistic. In general, hosts and targets are automatically suspended when all their children are asleep, but for them the runtime-suspend code doesn't actually do anything. (A host's runtime PM status is propagated up the device tree, though, so a runtime-PM-aware lower-level driver could power down the host adapter hardware at the appropriate times.) There are comments indicating where a transport class might be notified or some other hooks added. LUNs are runtime-suspended by calling the drivers' existing suspend handlers (and likewise for runtime-resume). Somewhat arbitrarily, the implementation delays for 100 ms before suspending an eligible LUN. This is because there typically are occasions during bootup when the same device file is opened and closed several times in quick succession. The way this all works is that the SCSI core increments a device's PM-usage count when it is registered. If a high-level driver does nothing then the device will not be eligible for runtime-suspend because of the elevated usage count. If a high-level driver wants to use runtime PM then it can call scsi_autopm_put_device() in its probe routine to decrement the usage count and scsi_autopm_get_device() in its remove routine to restore the original count. Hosts, targets, and LUNs are not suspended while they are being probed or removed, or while the error handler is running. In fact, a fairly large part of the patch consists of code to make sure that things aren't suspended at such times. [jejb: fix up compile issues in PM config variations] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] Log msg when getting Unit AttentionMike Christie2010-07-271-0/+13
|/ | | | | | | | | | | | | | | | If the user accidentally changes LUN mappings or it occurs due to a bug, then it can cause data corruption that can take months and months to track down. This patch adds a log message when getting REPORT_LUNS_DATA_CHANGED and it adds a generic message for other Unit Attentions with asc == 0x3f. We are working on adding support for handling of these errors, but I think until then we should at least log a message so tracking down problems as a result of one of these changes is a little easier. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] Merge scsi-misc-2.6 into scsi-rc-fixes-2.6James Bottomley2010-05-181-5/+14
|\ | | | | | | Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] add scsi trace core functions and put trace pointsKei Tokunaga2010-04-301-0/+4
| | | | | | | | | | | | | | Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@jp.fujitsu.com> Signed-off-by: Kei Tokunaga <tokunaga.keiich@jp.fujitsu.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] Allow FC LLD to fast-fail scsi eh by introducing new eh returnChristof Schmitt2010-04-111-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the scsi eh is running and then a FC LLD calls fc_remote_port_delete, the SCSI commands sent from the eh will fail. To prevent this, a FC LLD can call fc_block_scsi_eh from the eh callback, blocking the eh thread until the dev_loss_tmo fires or the remote port is available again. If (e.g. for a multipathing setup) the dev_loss_tmo is set to a very large value, thus preventing the scsi device removal , the scsi eh can block for a long time. For multipathing, the fast_io_fail_tmo is then set to a low value to detect path problems sooner. This patch introduces a new return code FAST_IO_FAIL. The function fc_block_scsi_eh now returns FAST_IO_FAIL when the fast_io_fail_tmo fires. This indicates that the LLD terminated all pending I/O requests and there are no more pending SCSI commands for the scsi eh to wait for. This return code can be passed back to the scsi eh to stop the escalation and finish the recovery process for this device. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] Retry commands with UNIT_ATTENTION sense codes to fix ext3/ext4 I/O errorJames Bottomley2010-05-051-1/+14
|/ | | | | | | | | | | | | | | | | | | | | There's nastyness in the way we currently handle barriers (and discards): They're effectively filesystem commands, but they get processed as BLOCK_PC commands. Unfortunately BLOCK_PC commands are taken by SCSI to be SG_IO commands and the issuer expects to see and handle any returned errors, however trivial. This leads to a huge problem, because the block layer doesn't expect this to happen and any trivially retryable error on a barrier causes an immediate I/O error to the filesystem. The only real way to hack around this is to take the usual class of offending errors (unit attentions) and make them all retryable in the case of a REQ_HARDBARRIER. A correct fix would involve a rework of the entire block and SCSI submit system, and so is out of scope for a quick fix. Cc: Hannes Reinecke <hare@suse.de> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* [SCSI] add queue_depth ramp up codeVasu Dev2009-12-041-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current FC HBA queue_depth ramp up code depends on last queue full time. The sdev already has last_queue_full_time field to track last queue full time but stored value is truncated by last four bits. So this patch updates last_queue_full_time without truncating last 4 bits to store full value and then updates its only current usages in scsi_track_queue_full to ignore last four bits to keep current usages same while also use this field in added ramp up code. Adds scsi_handle_queue_ramp_up to ramp up queue_depth on successful completion of IO. The scsi_handle_queue_ramp_up will do ramp up on all luns of a target, just same as ramp down done on all luns on a target. The ramp up is skipped in case the change_queue_depth is not supported by LLD or already reached to added max_queue_depth. Updates added max_queue_depth on every new update to default queue_depth value. The ramp up is also skipped if lapsed time since either last queue ramp up or down is less than LLD specified queue_ramp_up_period. Adds queue_ramp_up_period to sysfs but only if change_queue_depth is supported since ramp up and queue_ramp_up_period is needed only in case change_queue_depth is supported first. Initializes queue_ramp_up_period to 120HZ jiffies as initial default value, it is same as used in existing lpfc and qla2xxx. -v2 Combined all ramp code into this single patch. -v3 Moves max_queue_depth initialization after slave_configure is called from after slave_alloc calling done. Also adjusted max_queue_depth check to skip ramp up if current queue_depth is >= max_queue_depth. -v4 Changes sdev->queue_ramp_up_period unit to ms when using sysfs i/f to store or show its value. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Christof Schmitt <christof.schmitt@de.ibm.com> Tested-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] scsi error: have scsi-ml call change_queue_depth to handle QUEUE_FULLMike Christie2009-12-041-1/+26
| | | | | | | | | | | | | | | | | | This has scsi-ml call the change_queue_depth functions when we get a QUEUE_FULL. It will only change the queue depth if change_queue_depth is set because the LLD may have to modify some internal resources, so I thought this would be the safest route. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> -v2 Limits change_queue_depth to only all luns of target by adding channel check while iterating for all luns of Scsi_Host. This is same as currently qla2xxx FC HBA does on QUEUE_FULL event. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] Retry ADD_TO_MLQUEUE return value for EH commandsHannes Reinecke2009-10-021-0/+3
| | | | | | | | | | | | | | | A target reset when I/O is ongoing might result an eventual device offline, as scsi_eh_completed_normally() might return ADD_TO_MLQUEUE in addition to the advertised SUCCESS, FAILED, and NEEDS_RETRY. Which is unfortunate as scsi_send_eh_cmnd() will therefore map ADD_TO_MLQUEUE to FAILED instead of the more appropriate NEEDS_RETRY. Signed-off-by: Hannes Reinecke <hare@suse.de> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] reservation conflict after timeout causes device to be taken offlineMichael Reed2009-08-221-1/+5
| | | | | | | | | | | | | | | | | | | | An IBM tape drive failed to complete a PERSISTENT RESERVE IN within the scsi cmd timeout. Error recovery was initiated and it sequenced from abort through taking the tape drive offline. The device was taken offline because it repeatedly responded to the TUR command issued by error recovery with a RESERVATION CONFLICT status. The tape drive was reserved to another system. This is perfectly legitimate response to TUR, and is one that an escalation of recovery is unlikely to clear. Further, escalation of recovery can have undesirable side effects on the operation of tape drives shared with other initiators. Instead of escalating recovery, error recovery should treat the RESERVATION CONFLICT response to the TUR as a good status, giving the issuer of the command the opportunity to handle the timeout and reservation conflict. Signed-off-by: Michael reed <mdr@sgi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] fix up scsi_eh_lock_door()James Bottomley2009-06-081-12/+5
| | | | | | | | The Documentation is incorrect (we removed some functions referred to), and none of the bug warnings now apply. Additionally remove the spurious check on the return from blk_get_request() which can't fail if __GFP_WAIT is passed in. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] fix documentation for two functionsBartlomiej Zolnierkiewicz2009-06-081-2/+2
| | | | | Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] remove scsi_req_map_sgFUJITA Tomonori2009-03-121-10/+24
| | | | | | | | | | | | No one uses scsi_execute_async with data transfer now. We can remove scsi_req_map_sg. Only scsi_eh_lock_door uses scsi_execute_async. scsi_eh_lock_door doesn't handle sense and the callback. So we can remove scsi_io_context too. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds2009-01-081-18/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (45 commits) [SCSI] qla2xxx: Update version number to 8.03.00-k1. [SCSI] qla2xxx: Add ISP81XX support. [SCSI] qla2xxx: Use proper request/response queues with MQ instantiations. [SCSI] qla2xxx: Correct MQ-chain information retrieval during a firmware dump. [SCSI] qla2xxx: Collapse EFT/FCE copy procedures during a firmware dump. [SCSI] qla2xxx: Don't pollute kernel logs with ZIO/RIO status messages. [SCSI] qla2xxx: Don't fallback to interrupt-polling during re-initialization with MSI-X enabled. [SCSI] qla2xxx: Remove support for reading/writing HW-event-log. [SCSI] cxgb3i: add missing include [SCSI] scsi_lib: fix DID_RESET status problems [SCSI] fc transport: restore missing dev_loss_tmo callback to LLDD [SCSI] aha152x_cs: Fix regression that keeps driver from using shared interrupts [SCSI] sd: Correctly handle 6-byte commands with DIX [SCSI] sd: DIF: Fix tagging on platforms with signed char [SCSI] sd: DIF: Show app tag on error [SCSI] Fix error handling for DIF/DIX [SCSI] scsi_lib: don't decrement busy counters when inserting commands [SCSI] libsas: fix test for negative unsigned and typos [SCSI] a2091, gvp11: kill warn_unused_result warnings [SCSI] fusion: Move a dereference below a NULL test ... Fixed up trivial conflict due to moving the async part of sd_probe around in the async probes vs using dev_set_name() in naming.
| * [SCSI] clean up scsi_times_outChristoph Hellwig2009-01-021-18/+6
| | | | | | | | | | | | | | Make sure the control flow in scsi_times_out makes sense. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* | trivial: fix singal -> signal typoFrederik Schwarzer2009-01-061-1/+1
|/ | | | | | | Typo fix. Signed-off-by: Frederik Schwarzer <schwarzerf@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* [SCSI] scsi_error: TASK ABORTED status handling improvementVladislav Bolkhovitin2008-12-291-1/+2
| | | | | | | | | | | | | | | | | | | | | This patch improves handling of TASK ABORTED status by Linux SCSI mid-layer. Currently, command returned with this status considered failed and returned to upper layers. It leads to additional error recovery load on file systems and block layer, which sometimes can cause undesired side effects, like I/O errors and file systems corruptions. See http://lkml.org/lkml/2008/11/1/38, for instance. From other side, TASK ABORTED status is returned by SCSI target if the corresponding command was aborted by another initiator and the target has TAS bit set in the control mode page. So, in the majority of cases commands with TASK ABORTED status should be simply retried. In other cases, maybe_retry path will not retry if no retries are allowed. This patch implement suggestion by James Bottomley from http://marc.info/?l=linux-scsi&m=121932916906009&w=2. Signed-off-by: Vladislav Bolkhovitin <vst@vlnb.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] scsi_error: fix indentation and braces disagreement - add bracesIlpo Järvinen2008-12-291-1/+2
| | | | | | | | | | ...and the list of recent breakage goes on and on, this time it's 242f9dcb8ba6f (block: unify request timeout handling) which broke it. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Acked-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] make scsi_eh_try_stu use block timeoutJames Bottomley2008-12-011-2/+1
| | | | | | | | | | | | | | | | scsi_eh_try_stu() was still using the timeout parameter in the device which is now not set (i.e. zero filled) meaning that it waited no time at all for the start unit command to complete (leading the routine to conclude failure every time). This lead to a 2.6.27 regression: http://bugzilla.kernel.org/show_bug.cgi?id=12120 Where firewire devices that were non spec compliant wouldn't spin up. Fix this by using the block queue timeout value instead. Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] scsi_error regression: Fix idempotent command handlingMike Christie2008-11-051-2/+3
| | | | | | | | | | | | | | Drivers want to be able to return DID_TRANSPORT_DISRUPTED and have it do the right thing for commands like tape and passthrouh as far as retries go. The LLDs previously used DID_BUS_BUSY or DID_ERROR which followed the cmd->retries limit, but DID_TRANSPORT_DISRUPTED was skipping that check so it could have caused a problem with tape commands. This patch has DID_TRANSPORT_DISRUPTED check the cmd->retries/cmd->allowed. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] scsi_error: fix target reset handlingJames Bottomley2008-10-131-4/+15
| | | | | | | | | | | | | | | | | | | | There's a target reset bug. This loop: for (id = 0; id <= shost->max_id; id++) { Never terminates if shost->max_id is set to ~0, like aic94xx does. It's also pretty inefficient since you mostly have compact target numbers, but the max_id can be very high. The best way would be to sort the recovery list by target id and skip them if they're equal, but even a worst case O(N^2) traversal is probably OK here, so fix it by finding the next highest target number (assuming n+1) and terminating when there isn't one. Cc: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] modify scsi to handle new fail fast flags.Mike Christie2008-10-131-2/+36
| | | | | | | | | | | | | | | | | | | | | | | | This checks the errors the scsi-ml determined were retryable and returns if we should fast fail it based on the request fail fast flags. Without the patch, drivers like lpfc, qla2xxx and fcoe would return DID_ERROR for what it determines is a temporary communication problem. There is no loss of connectivity at that time and the driver thinks that it would be fast to retry at the driver level. SCSI-ml will however sees fast fail on the request and DID_ERROR and will fast fail the io. This will then cause dm-multipath to fail the path and possibley switch target controllers when we should be retrying at the scsi layer. We also were fast failing device errors to dm multiapth when unless the scsi_dh modules think otherwis we want to retry at the scsi layer because multipath can only retry the IO like scsi should have done. multipath is a little dumber though because it does not what the error was for and assumes that it should fail the paths. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] scsi: add transport host byte errors (v3)Mike Christie2008-10-131-1/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, if there is a transport problem the iscsi drivers will return outstanding commands (commands being exeucted by the driver/fw/hw) with DID_BUS_BUSY and block the session so no new commands can be queued. Commands that are caught between the failure handling and blocking are failed with DID_IMM_RETRY or one of the scsi ml queuecommand return values. When the recovery_timeout fires, the iscsi drivers then fail IO with DID_NO_CONNECT. For fcp, some drivers will fail some outstanding IO (disk but possibly not tape) with DID_BUS_BUSY or DID_ERROR or some other value that causes a retry and hits the scsi_error.c failfast check, block the rport, and commands caught in the race are failed with DID_IMM_RETRY. Other drivers, may hold onto all IO and wait for the terminate_rport_io or dev_loss_tmo_callbk to be called. The following patches attempt to unify what upper layers will see drivers like multipath can make a good guess. This relies on drivers being hooked into their transport class. This first patch just defines two new host byte errors so drivers can return the same value for when a rport/session is blocked and for when the fast_io_fail_tmo fires. The idea is that if the LLD/class detects a problem and is going to block a rport/session, then if the LLD wants or must return the command to scsi-ml, then it can return it with DID_TRANSPORT_DISRUPTED. This will requeue the IO into the same scsi queue it came from, until the fast io fail timer fires and the class decides what to do. When using multipath and the fast_io_fail_tmo fires then the class can fail commands with DID_TRANSPORT_FAILFAST or drivers can use DID_TRANSPORT_FAILFAST in their terminate_rport_io callbacks or the equivlent in iscsi if we ever implement more advanced recovery methods. A LLD, like lpfc, could continue to return DID_ERROR and then it will hit the normal failfast path, so drivers do not have fully be ported to work better. The point of the patches is that upper layers will not see a failure that could be recovered from while the rport/session is blocked until fast_io_fail_tmo/recovery_timeout fires. V3 Remove some comments. V2 Fixed patch/diff errors and renamed DID_TRANSPORT_BLOCKED to DID_TRANSPORT_DISRUPTED. V1 initial patch. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* block: unify request timeout handlingJens Axboe2008-10-091-77/+13
| | | | | | | | | | | | | Right now SCSI and others do their own command timeout handling. Move those bits to the block layer. Instead of having a timer per command, we try to be a bit more clever and simply have one per-queue. This avoids the overhead of having to tear down and setup a timer for each command, so it will result in a lot less timer fiddling. Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* [SCSI] make scsi_check_sense HARDWARE_ERROR return ADD_TO_MLQUEUE on retryMike Anderson2008-08-291-1/+1
| | | | | | | | | Change scsi_check_sense HARDWARE_ERROR check to return ADD_TO_MLQUEUE if device->retry_hwerror is set to allow retries to occur without restriction of blk_noretry_request check. Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] replace __FUNCTION__ with __func__Harvey Harrison2008-07-271-13/+13
| | | | | | | | | | | | [jejb: fixed up a ton of missed conversions. All of you are on notice this has happened, driver trees will now need to be rebased] Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: SCSI List <linux-scsi@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] scsi_eh_prep_cmnd should save scmd->underflowAlan Stern2008-07-261-0/+2
| | | | | | | | | | | | | This patch (as1116) fixes a bug in scsi_eh_prep_cmnd() and scsi_eh_restore_cmnd(). These routines are supposed to save any values they change and restore them later, but someone forgot to save & restore scmd->underflow. This fixes part of the problem reported in Bugzilla #9638. [jejb: fix up rejections around DIF/DIX] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] Do not retry a request whose data integrity check failedMartin K. Petersen2008-07-261-0/+3
| | | | | | | | If initiator or target reject the I/O due to DIF errors there is no point in retrying. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] Command protection operationMartin K. Petersen2008-07-261-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | Controllers that support DMA of protection information must be told explicitly how to handle the I/O. The controller has no knowledge of the protection capabilities of the target device so this information must be passed in the scsi_cmnd. - The protection operation tells the HBA whether to generate, strip or verify protection information. - The protection type tells the HBA which layout the target is formatted with. This is necessary because the controller must be able to correctly interpret the included protection information in order to verify it. - When a scsi_cmnd is reused for error handling the protection operation must be cleared and saved while error handling is in progress. - prot_op and prot_type are placed in an existing hole in scsi_cmnd and don't cause the structure to grow. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] scsi_dh: add infrastructure for SCSI Device HandlersChandra Seetharaman2008-06-051-0/+11
| | | | | | | | | | | | | | | | | | | | | | Some of the storage devices (that can be accessed through multiple paths), do need some special handling for 1. Activating the passive path of the storage access. 2. Decode and handle the special sense codes returned by the devices. 3. Handle the I/Os being sent to the passive path, especially during the device probe time. when accessed through multiple paths. As of today this special device handling is done at the dm-multipath layer using dm-handlers. That works well for (1); for (2) to be handled at dm layer, scsi sense information need to be exported from SCSI to dm-layer, which is not very attractive; (3) cannot be done at all at the dm layer. Device handler has been moved to SCSI mainly to handle (2) and (3) properly. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds2008-05-021-7/+8
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: [SCSI] aic94xx: fix section mismatch [SCSI] u14-34f: Fix 32bit only problem [SCSI] dpt_i2o: sysfs code [SCSI] dpt_i2o: 64 bit support [SCSI] dpt_i2o: move from virt_to_bus/bus_to_virt to dma_alloc_coherent [SCSI] dpt_i2o: use standard __init / __exit code [SCSI] megaraid_sas: fix suspend/resume sections [SCSI] aacraid: Add Power Management support [SCSI] aacraid: Fix jbod operations scan issues [SCSI] aacraid: Fix warning about macro side-effects [SCSI] add support for variable length extended commands [SCSI] Let scsi_cmnd->cmnd use request->cmd buffer [SCSI] bsg: add large command support [SCSI] aacraid: Fix down_interruptible() to check the return value correctly [SCSI] megaraid_sas; Update the Version and Changelog [SCSI] ibmvscsi: Handle non SCSI error status [SCSI] bug fix for free list handling [SCSI] ipr: Rename ipr's state scsi host attribute to prevent collisions [SCSI] megaraid_mbox: fix Dell CERC firmware problem
| * [SCSI] Let scsi_cmnd->cmnd use request->cmd bufferBoaz Harrosh2008-05-021-7/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - struct scsi_cmnd had a 16 bytes command buffer of its own. This is an unnecessary duplication and copy of request's cmd. It is probably left overs from the time that scsi_cmnd could function without a request attached. So clean that up. - Once above is done, few places, apart from scsi-ml, needed adjustments due to changing the data type of scsi_cmnd->cmnd. - Lots of drivers still use MAX_COMMAND_SIZE. So I have left that #define but equate it to BLK_MAX_CDB. The way I see it and is reflected in the patch below is. MAX_COMMAND_SIZE - means: The longest fixed-length (*) SCSI CDB as per the SCSI standard and is not related to the implementation. BLK_MAX_CDB. - The allocated space at the request level - I have audit all ISA drivers and made sure none use ->cmnd in a DMA Operation. Same audit was done by Andi Kleen. (*)fixed-length here means commands that their size can be determined by their opcode and the CDB does not carry a length specifier, (unlike the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly true and the SCSI standard also defines extended commands and vendor specific commands that can be bigger than 16 bytes. The kernel will support these using the same infrastructure used for VARLEN CDB's. So in effect MAX_COMMAND_SIZE means the maximum size command scsi-ml supports without specifying a cmd_len by ULD's Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* | block: use blk_rq_init() to initialize the requestFUJITA Tomonori2008-04-291-0/+1
|/ | | | | | | | | | | | Any path needs to call it to initialize the request. This is a preparation for large command support, which needs to initialize the request in a proper way (that is, just doing a memset() will not work). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* [SCSI] add scsi_build_sense_buffer helper functionFUJITA Tomonori2008-04-071-0/+28
| | | | | | | | This adds scsi_build_sense_buffer, a simple helper function to build sense data in a buffer. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
OpenPOWER on IntegriCloud