summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/ipr.c
Commit message (Collapse)AuthorAgeFilesLines
* ipr: Enable SIS pipe commands for SIS-32 devices.Gabriel Krisman Bertazi2015-08-281-1/+1
| | | | | | | | | | | | Remove unnecessary check that disabled SIS pipe commands for SIS-32 devices. This change was sufficient to enable raw mode and send SIS pipe commands for a 57B3 device. Fixes: f8ee25d7d239 ("ipr: AF DASD raw mode implementation in ipr driver") Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* ipr: Inhibit underlength data check for AFDASD in raw mode.Gabriel Krisman Bertazi2015-08-281-1/+5
| | | | | | | | | | | | | Disable underlength error verification based on count of bytes actually transferred for AF DASD devices when SIS pipe mode is enabled. This avoids unexpected underlength errors when issuing some commands in raw mode. Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* ipr: Endian / sparse fixesBrian King2015-07-301-6/+7
| | | | | | | | | | | Some misc fixes for endianness checking with sparse so sparse with endian checking now runs clean. Fixes a minor bug in the process which was uncovered by sparse which would result in unnecessary error recovery for check conditions. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* ipr: Byte swapping for device_id attribute in sysfsWen Xiong2015-07-301-1/+1
| | | | | | | | | | On LE system, users see the wrong device_id attribute. This patch does necessary byte swapping for device_id attribute and works on both of LE and BE systems. Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* ipr: Fix invalid array indexing for HRRQBrian King2015-07-301-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes another signed / unsigned array indexing bug in the ipr driver. Currently, when hrrq_index wraps, it becomes a negative number. We do the modulo, but still have a negative number, so we end up indexing backwards in the array. Given where the hrrq array is located in memory, we probably won't actually reference memory we don't own, but nonetheless ipr is still looking at data within struct ipr_ioa_cfg and interpreting it as struct ipr_hrr_queue data, so bad things could certainly happen. Each ipr adapter has anywhere from 1 to 16 HRRQs. By default, we use 2 on new adapters. Let's take an example: Assume ioa_cfg->hrrq_index=0x7fffffffe and ioa_cfg->hrrq_num=4: The atomic_add_return will then return -1. We mod this with 3 and get -2, add one and get -1 for an array index. On adapters which support more than a single HRRQ, we dedicate HRRQ to adapter initialization and error interrupts so that we can optimize the other queues for fast path I/O. So all normal I/O uses HRRQ 1-15. So we want to spread the I/O requests across those HRRQs. With the default module parameter settings, this bug won't hit, only when someone sets the ipr.number_of_msix parameter to a value larger than 3 is when bad things start to happen. Cc: <stable@vger.kernel.org> Tested-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* ipr: Fix incorrect trace indexingBrian King2015-07-301-2/+3
| | | | | | | | | | | | | | | When ipr's internal driver trace was changed to an atomic, a signed/unsigned bug slipped in which results in us indexing backwards in our memory buffer writing on memory that does not belong to us. This patch fixes this by removing the modulo and instead just mask off the low bits. Cc: <stable@vger.kernel.org> Tested-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* ipr: Fix locking for unit attention handlingBrian King2015-07-301-5/+7
| | | | | | | | | | | | | Make sure we have the host lock held when calling scsi_report_bus_reset. Fixes a crash seen as the __devices list in the scsi host was changing as we were iterating through it. Cc: <stable@vger.kernel.org> Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2015-04-161-25/+294
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull SCSI updates from James Bottomley: "This is the usual grab bag of driver updates (lpfc, qla2xxx, storvsc, aacraid, ipr) plus an assortment of minor updates. There's also a major update to aic1542 which moves the driver into this millenium" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (106 commits) change SCSI Maintainer email sd, mmc, virtio_blk, string_helpers: fix block size units ufs: add support to allow non standard behaviours (quirks) ufs-qcom: save controller revision info in internal structure qla2xxx: Update driver version to 8.07.00.18-k qla2xxx: Restore physical port WWPN only, when port down detected for FA-WWPN port. qla2xxx: Fix virtual port configuration, when switch port is disabled/enabled. qla2xxx: Prevent multiple firmware dump collection for ISP27XX. qla2xxx: Disable Interrupt handshake for ISP27XX. qla2xxx: Add debugging info for MBX timeout. qla2xxx: Add serdes read/write support for ISP27XX qla2xxx: Add udev notification to save fw dump for ISP27XX qla2xxx: Add message for sucessful FW dump collected for ISP27XX. qla2xxx: Add support to load firmware from file for ISP 26XX/27XX. qla2xxx: Fix beacon blink for ISP27XX. qla2xxx: Increase the wait time for firmware to be ready for P3P. qla2xxx: Fix crash due to wrong casting of reg for ISP27XX. qla2xxx: Fix warnings reported by static checker. lpfc: Update version to 10.5.0.0 for upstream patch set lpfc: Update copyright to 2015 ...
| * ipr: AF DASD raw mode implementation in ipr driverWen Xiong2015-04-091-0/+85
| | | | | | | | | | | | | | | | | | | | | | | | This patch implements raw mode support for AF DASD in ipr driver which allows for tools to send commands directly to physical devices which are members of RAID arrays when enabled in the firmware. [jejb: fix up whitespace] Signed-off-by: Wen Xiong<wenxiong@linux.vnet.ibm.com> Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Reviewed-by: Daniel Kreling <kreling@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
| * ipr: Re-enable write sameBrian King2015-04-091-1/+0
| | | | | | | | | | | | | | | | | | Re-enable write same support for ipr RAID adapters. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: Daniel Kreling <kreling@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
| * ipr: Fix possible error path oops during initializationBrian King2015-04-091-7/+9
| | | | | | | | | | | | | | | | | | | | | | Fixes a possible oops during adapter initialization in some memory allocation failure error paths scenarios. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: Daniel Kreling <kreling@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
| * ipr: Reset in task contextBrian King2015-04-091-26/+65
| | | | | | | | | | | | | | | | | | | | | | The pci_set_pcie_reset_state has changed semantics to not be callable from interrupt context, so change ipr's usage of the API to comply with this change by ensuring this occurs from a workqueue. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: Daniel Kreling <kreling@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
| * ipr: Reboot speed improvementsBrian King2015-04-091-8/+152
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently when performing a reboot with an ipr adapter, the adapter gets shutdown completely, flushing all write cache, as well as performing a full hardware reset of the card during the shutdown phase of the old kernel. This ensures the adapter is in a fully quiesced state across the reboot. There are scenarios, however, such as when performing kexec, where this full adapter shutdown is not required and not desired, since it can make the reboot process take noticeably longer. This patch adds a module parameter to allow for skipping the full shutdown during reboot. Rather than performing a full adapter shutdown and reset, we simply cancel any outstanding error buffers, place the adapter into a state where it has no memory of any DMA addresses from the old kernel, then disable the device. This significantly speeds up kexec boot, particularly in configurations with multiple ipr adapters. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: Daniel Kreling <kreling@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* | ata: Add a new flag to destinguish sas controllerShaohua Li2015-03-191-1/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SAS controller has its own tag allocation, which doesn't directly match to ATA tag, so SAS and SATA have different code path for ata tags. Originally we use port->scsi_host (98bd4be1) to destinguish SAS controller, but libsas set ->scsi_host too, so we can't use it for the destinguish, we add a new flag for this purpose. Without this patch, the following oops can happen because scsi-mq uses a host-wide tag map shared among all devices with some integer tag values >= ATA_MAX_QUEUE. These unexpectedly high tag values cause __ata_qc_from_tag() to return NULL, which is then dereferenced in ata_qc_new_init(). BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 IP: [<ffffffff804fd46e>] ata_qc_new_init+0x3e/0x120 PGD 32adf0067 PUD 32adf1067 PMD 0 Oops: 0002 [#1] SMP DEBUG_PAGEALLOC Modules linked in: iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi igb i2c_algo_bit ptp pps_core pm80xx libsas scsi_transport_sas sg coretemp eeprom w83795 i2c_i801 CPU: 4 PID: 1450 Comm: cydiskbench Not tainted 4.0.0-rc3 #1 Hardware name: Supermicro X8DTH-i/6/iF/6F/X8DTH, BIOS 2.1b 05/04/12 task: ffff8800ba86d500 ti: ffff88032a064000 task.ti: ffff88032a064000 RIP: 0010:[<ffffffff804fd46e>] [<ffffffff804fd46e>] ata_qc_new_init+0x3e/0x120 RSP: 0018:ffff88032a067858 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff8800ba0d2230 RCX: 000000000000002a RDX: ffffffff80505ae0 RSI: 0000000000000020 RDI: ffff8800ba0d2230 RBP: ffff88032a067868 R08: 0000000000000201 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800ba0d0000 R13: ffff8800ba0d2230 R14: ffffffff80505ae0 R15: ffff8800ba0d0000 FS: 0000000041223950(0063) GS:ffff88033e480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000058 CR3: 000000032a0a3000 CR4: 00000000000006e0 Stack: ffff880329eee758 ffff880329eee758 ffff88032a0678a8 ffffffff80502dad ffff8800ba167978 ffff880329eee758 ffff88032bf9c520 ffff8800ba167978 ffff88032bf9c520 ffff88032bf9a290 ffff88032a0678b8 ffffffff80506909 Call Trace: [<ffffffff80502dad>] ata_scsi_translate+0x3d/0x1b0 [<ffffffff80506909>] ata_sas_queuecmd+0x149/0x2a0 [<ffffffffa0046650>] sas_queuecommand+0xa0/0x1f0 [libsas] [<ffffffff804ea544>] scsi_dispatch_cmd+0xd4/0x1a0 [<ffffffff804eb50f>] scsi_queue_rq+0x66f/0x7f0 [<ffffffff803e5098>] __blk_mq_run_hw_queue+0x208/0x3f0 [<ffffffff803e54b8>] blk_mq_run_hw_queue+0x88/0xc0 [<ffffffff803e5c74>] blk_mq_insert_request+0xc4/0x130 [<ffffffff803e0b63>] blk_execute_rq_nowait+0x73/0x160 [<ffffffffa0023fca>] sg_common_write+0x3da/0x720 [sg] [<ffffffffa0025100>] sg_new_write+0x250/0x360 [sg] [<ffffffffa0025feb>] sg_write+0x13b/0x450 [sg] [<ffffffff8032ec91>] vfs_write+0xd1/0x1b0 [<ffffffff8032ee54>] SyS_write+0x54/0xc0 [<ffffffff80689932>] system_call_fastpath+0x12/0x17 tj: updated description. Fixes: 12cb5ce101ab ("libata: use blk taging") Reported-and-tested-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
* ipr: wait for aborted command responsesBrian King2015-01-191-0/+92
| | | | | | | | | | | | | | | | | | | | Fixes a race condition in abort handling that was injected when multiple interrupt support was added. When only a single interrupt is present, the adapter guarantees it will send responses for aborted commands prior to the response for the abort command itself. With multiple interrupts, these responses generally come back on different interrupts, so we need to ensure the abort thread waits until the aborted command is complete so we don't perform a double completion. This race condition was being hit frequently in environments which were triggering command timeouts, which was resulting in a double completion causing a kernel oops. Cc: <stable@vger.kernel.org> Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Reviewed-by: Wendy Xiong <wenxiong@linux.vnet.ibm.com> Tested-by: Wendy Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* ipr: set scsi_level correctly for disk arraysBrian King2014-12-151-0/+1
| | | | | | | | | | Set the scsi_level correctly for disk arrays such that things like the rotational field get set properly by sd.c. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Reviewed-by: Wen Xiong<wenxiong@linux.vnet.ibm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* ipr: add support for async scanning to speed up bootBrian King2014-12-151-45/+43
| | | | | | | | | | Switch device scanning logic in the ipr driver to use the async scan API. This speeds up boot times, particularly on large systems. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Reviewed-by: Wen Xiong<wenxiong@linux.vnet.ibm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* scsi: remove scsi_get_tag_typeChristoph Hellwig2014-12-041-1/+1
| | | | | | | | | | Both remaining users are better of just checking sdev->simple_tags directly. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com Reviewed-by: Hannes Reinecke <hare@suse.de>
* scsi: remove ->change_queue_type methodChristoph Hellwig2014-12-041-25/+0
| | | | | | | | | | | | Since we got rid of ordered tag support in 2010 the prime use case of switching on and off ordered tags has been obsolete. The other function of enabling/disabling tagging entirely has only been correctly implemented by the 53c700 driver and isn't generally useful. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com Reviewed-by: Hannes Reinecke <hare@suse.de>
* scsi: drop reason argument from ->change_queue_depthChristoph Hellwig2014-11-241-7/+3
| | | | | | | | | | | Drop the now unused reason argument from the ->change_queue_depth method. Also add a return value to scsi_adjust_queue_depth, and rename it to scsi_change_queue_depth now that it can be used as the default ->change_queue_depth implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de>
* ipr: set coherent DMA maskAnton Blanchard2014-11-121-5/+6
| | | | | | | | | Use dma_set_mask_and_coherent() to set both the DMA and coherent DMA mask. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* ipr: convert to generic DMA APIAnton Blanchard2014-11-121-49/+52
| | | | | | | | | Even though the ipr driver is only used on PCI, convert it to use the generic DMA API. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* scsi: don't set tagging state from scsi_adjust_queue_depthChristoph Hellwig2014-11-121-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | Remove the tagged argument from scsi_adjust_queue_depth, and just let it handle the queue depth. For most drivers those two are fairly separate, given that most modern drivers don't care about the SCSI "tagged" status of a command at all, and many old drivers allow queuing of multiple untagged commands in the driver. Instead we start out with the ->simple_tags flag set before calling ->slave_configure, which is how all drivers actually looking at ->simple_tags except for one worke anyway. The one other case looks broken, but I've kept the behavior as-is for now. Except for that we only change ->simple_tags from the ->change_queue_type, and when rejecting a tag message in a single driver, so keeping this churn out of scsi_adjust_queue_depth is a clear win. Now that the usage of scsi_adjust_queue_depth is more obvious we can also remove all the trivial instances in ->slave_alloc or ->slave_configure that just set it to the cmd_per_lun default. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: always assign block layer tags if enabledChristoph Hellwig2014-11-121-0/+1
| | | | | | | | | | | | | Allow a driver to ask for block layer tags by setting .use_blk_tags in the host template, in which case it will always see a valid value in request->tag, similar to the behavior when using blk-mq. This means even SCSI "untagged" commands will now have a tag, which is especially useful when using a host-wide tag map. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
* scsi: remove abuses of scsi_populate_tagChristoph Hellwig2014-11-121-30/+4
| | | | | | | | | | | | | Unless we want to build a SPI tag message we should just check SCMD_TAGGED instead of reverse engineering a tag type through the use of scsi_populate_tag_msg. Also rename the function to spi_populate_tag_msg, make it behave like the other spi message helpers, and move it to the spi transport class. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de>
* scsi: provide a generic change_queue_type methodChristoph Hellwig2014-11-121-17/+3
| | | | | | | | | | | Most drivers use exactly the same implementation, so provide it as a library function. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
* ipr: don't log error messages when applications issues illegal requestswenxiong@linux.vnet.ibm.com2014-09-251-0/+10
| | | | | | | | | | Failing Device information are logged when IOA firmware detected these illegal request such as IOA firmware doesn't support inquiry with page code 2. The patch fixes the issue. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Tested-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* Merge branch 'for-3.15/core' of git://git.kernel.dk/linux-blockLinus Torvalds2014-04-011-10/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull core block layer updates from Jens Axboe: "This is the pull request for the core block IO bits for the 3.15 kernel. It's a smaller round this time, it contains: - Various little blk-mq fixes and additions from Christoph and myself. - Cleanup of the IPI usage from the block layer, and associated helper code. From Frederic Weisbecker and Jan Kara. - Duplicate code cleanup in bio-integrity from Gu Zheng. This will give you a merge conflict, but that should be easy to resolve. - blk-mq notify spinlock fix for RT from Mike Galbraith. - A blktrace partial accounting bug fix from Roman Pen. - Missing REQ_SYNC detection fix for blk-mq from Shaohua Li" * 'for-3.15/core' of git://git.kernel.dk/linux-block: (25 commits) blk-mq: add REQ_SYNC early rt,blk,mq: Make blk_mq_cpu_notify_lock a raw spinlock blk-mq: support partial I/O completions blk-mq: merge blk_mq_insert_request and blk_mq_run_request blk-mq: remove blk_mq_alloc_rq blk-mq: don't dump CPU -> hw queue map on driver load blk-mq: fix wrong usage of hctx->state vs hctx->flags blk-mq: allow blk_mq_init_commands() to return failure block: remove old blk_iopoll_enabled variable blktrace: fix accounting of partially completed requests smp: Rename __smp_call_function_single() to smp_call_function_single_async() smp: Remove wait argument from __smp_call_function_single() watchdog: Simplify a little the IPI call smp: Move __smp_call_function_single() below its safe version smp: Consolidate the various smp_call_function_single() declensions smp: Teach __smp_call_function_single() to check for offline cpus smp: Remove unused list_head from csd smp: Iterate functions through llist_for_each_entry_safe() block: Stop abusing rq->csd.list in blk-softirq block: Remove useless IPI struct initialization ...
| * block: remove old blk_iopoll_enabled variableJens Axboe2014-03-131-10/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This was a debugging measure to toggle enabled/disabled when testing. But for real production setups, it's not safe to toggle this setting without either reloading drivers of quiescing IO first. Neither of which the toggle enforces. Additionally, it makes drivers deal with the conditional state. Remove it completely. It's up to the driver whether iopoll is enabled or not. Signed-off-by: Jens Axboe <axboe@fb.com>
* | [SCSI] ipr: Add new CCIN definition for Grand Canyon supportWendy Xiong2014-03-191-0/+6
| | | | | | | | | | | | | | | | Add the appropriate definition and table entry for new hardware support. Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* | [SCSI] ipr: Format HCAM overlay ID 0x21Wendy Xiong2014-03-191-0/+39
| | | | | | | | | | | | | | | | | | This patch adds formatting error overlay 0x21 to improve debug capabilities. [jejb: checkpatch fixes] Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* | [SCSI] ipr: Use pci_enable_msi_range() and pci_enable_msix_range()Alexander Gordeev2014-03-191-29/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | As result deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* | [SCSI] ipr: Get rid of superfluous call to pci_disbale_msi/msix()Alexander Gordeev2014-03-191-2/+0
| | | | | | | | | | | | | | | | | | | | There is no need to call pci_disable_msi() or pci_disable_msix() in case the call to pci_enable_msi() or pci_enable_msix() failed. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* | [SCSI] ipr: Handle early EEHBrian King2014-03-191-89/+176
| | | | | | | | | | | | | | | | | | | | | | | | | | If, when the ipr driver loads, the adapter is in an EEH error state, it will currently oops and not be able to recover, as it attempts to access memory that has not yet been allocated. We've seen this occur in some kexec scenarios. The following patch fixes the oops and also allows the driver to recover from these probe time EEH errors. [jejb: checkpatch fix] Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* | [SCSI] ipr: Add new CCIN definition for new hardware supportWendy Xiong2014-03-191-0/+2
| | | | | | | | | | | | | | | | Add the appropriate definition and table entry for new hardware support. Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* | [SCSI] ipr: Remove extended delay bit on GSCSI reads/writes opsWendy Xiong2014-03-191-1/+5
|/ | | | | | | | | This patch removes extended delay bit on GSCSI reads/writes ops, the performance will be significanly better. Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] ipr: Increase msi-x interrupt vectors to 16wenxiong@linux.vnet.ibm.com2013-12-191-1/+1
| | | | | | Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] Disable WRITE SAME for RAID and virtual host adapter driversMartin K. Petersen2013-11-291-1/+2
| | | | | | | | | | | | | | | | | | Some host adapters do not pass commands through to the target disk directly. Instead they provide an emulated target which may or may not accurately report its capabilities. In some cases the physical device characteristics are reported even when the host adapter is processing commands on the device's behalf. This can lead to adapter firmware hangs or excessive I/O errors. This patch disables WRITE SAME for devices connected to host adapters that provide an emulated target. Driver writers can disable WRITE SAME by setting the no_write_same flag in the host adapter template. [jejb: fix up rejections due to eh_deadline patch] Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] ipr: Add sereral new CCIN definitions for new adapters supportwenxiong@linux.vnet.ibm.com2013-08-261-0/+14
| | | | | | | Add the appropriate definitions and table entries for new adapter support. Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] ipr: IOA Status Code(IOASC) updatewenxiong@linux.vnet.ibm.com2013-06-261-1/+39
| | | | | | Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] ipr: qc_fill_rtf() method should not store alternate status registerSergei Shtylyov2013-06-261-1/+0
| | | | | | | | | | | | | The 'ctl' field of the 'struct ata_taskfile' is not really dual purpose, i.e. it is not intended for storing the alternate status register (which is mapped at the same address in the legacy IDE controllers) in the qc_fill_rtf() method. No other 'libata' driver except 'drivers/scsi/ipr.c' stores the alternate status register's value in the 'ctl' field of 'qc->result_tf', hence this driver should not do this as well... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] ipr: possible irq lock inversion dependency detectedwenxiong@linux.vnet.ibm.com2013-06-261-8/+9
| | | | | | | | | When enable lockdep, seeing "possible irq lock inversion dependency detected" error. This patch fixes the issue. Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] ipr: Avoid target_destroy accessing memory after it was freedwenxiong@linux.vnet.ibm.com2013-06-041-16/+0
| | | | | | | | Defined target_ids,array_ids and vsets_ids as unsigned long to avoid target_destroy accessing memory after it was freed. Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] ipr: SATA DVD probing failed with 64bit adapterwenxiong@linux.vnet.ibm.com2013-05-021-2/+2
| | | | | | | | | Driver passed the wrong IOADL address to IOA adapter. The patch fixes the issue. Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] ipr: Need to reset adapter after the 6th EEH errorwenxiong@linux.vnet.ibm.com2013-05-021-2/+10
| | | | | | | | | Add reset adapter after the 6th EEH errors in ipr driver. This triggers the adapter reset via the PCI config space even when the slot is frozen. Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] ipr: dlpar failed when adding an adapter backwenxiong@linux.vnet.ibm.com2013-04-061-0/+1
| | | | | | | | | | Reinitialize resource queue prior to freeing resource entries to ensure they are not referenced. This fixes an issue with target_destoy accessing memory after it was freed. Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] ipr: fix addition of abort command to HRRQ free queueKleber Sacilotto de Souza2013-04-061-1/+1
| | | | | | | | | | | The abort command issued by ipr_cancel_op() is being added to the wrong HRRQ free queue after the command returns. Fix it by using the HRRQ pointer in the ipr command struct itself. Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] ipr: ipr_test_msi() fails when running with msi-x enabled adapterwenxiong@linux.vnet.ibm.com2013-04-061-2/+8
| | | | | | | | | | Loading ipr modules failed(-22) with msi-x enabled adapter. In ipr_test_msi(), We need to pass the first vector of msix vectors instead of using pdev->irq to request_irq() when adapter enables msix feature. Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] ipr: Fix oops while resetting an ipr adapterBrian King2013-02-241-10/+23
| | | | | | | | | | | | | | | | | When resetting an ipr adapter, we use scsi_block_requests to block any new commands from scsi core, and then unblock after the reset. When hotplug removing an adapter, we shut it down and go through this same code, but we've seen issues with scsi_unblock_requests running after the adapter's memory has been freed. There is really no need to block/unblock when the adapter is being removed, so this patch skips the block/unblock and will immediately fail any commands that happen to make it to queuecommand while the adapter is being shutdown. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] ipr: Fix sparse error in ipr driverwenxiong@linux.vnet.ibm.com2013-01-301-52/+17
| | | | | | | | | | | This patch fixes the following sparse error: CHECK drivers/scsi/ipr.c spinlock.h:147:9: warning: context imbalance in 'ipr_reset_reload' - unexpected unlock Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
OpenPOWER on IntegriCloud