summaryrefslogtreecommitdiffstats
path: root/drivers/s390
Commit message (Collapse)AuthorAgeFilesLines
* [PATCH] zfcp: fix incorrect usage of fsf_req_list_lockHeiko Carstens2006-07-031-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ================================= [ INFO: inconsistent lock state ] --------------------------------- inconsistent {in-hardirq-W} -> {hardirq-on-W} usage. swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes: (&adapter->fsf_req_list_lock){++..}, at: [<0000000000274486>] zfcp_qdio_reqid_check+0x46/0x178 {in-hardirq-W} state was registered at: [<000000000005fb0c>] __lock_acquire+0xad8/0xed0 [<00000000000604ae>] lock_acquire+0x9a/0xc8 [<000000000035a326>] _spin_lock+0x4e/0x68 [<0000000000274486>] zfcp_qdio_reqid_check+0x46/0x178 [<000000000027469e>] zfcp_qdio_response_handler+0xe6/0x430 [<0000000000219dd4>] tiqdio_thinint_handler+0xd20/0x213c [<000000000020229a>] do_adapter_IO+0xb2/0xc0 [<0000000000206f32>] do_IRQ+0x136/0x16c [<0000000000020462>] io_no_vtime+0x16/0x1c [<0000000000019432>] cpu_idle+0x222/0x250 irq event stamp: 129220 hardirqs last enabled at (129220): [<00000000000411e6>] tasklet_hi_action+0x5a/0x19c hardirqs last disabled at (129219): [<00000000000411c0>] tasklet_hi_action+0x34/0x19c softirqs last enabled at (129212): [<0000000000040b62>] __do_softirq+0x13a/0x180 softirqs last disabled at (129217): [<000000000001fd58>] do_softirq+0xec/0xf0 other info that might help us debug this: no locks held by swapper/0. stack backtrace: 00000000012bb670 0000000000000002 0000000000000000 00000000012bb780 00000000012bb6e8 0000000000399122 0000000000399122 0000000000016b0a 0000000000000000 0000000000000000 0000000000000000 00000000004660e8 0000000000000000 000000000000000d 00000000012bb6e0 00000000012bb758 0000000000368b90 0000000000016b0a 00000000012bb6e0 00000000012bb730 Call Trace: ([<0000000000016a26>] show_trace+0x76/0xdc) [<0000000000016b2c>] show_stack+0xa0/0xd0 [<0000000000016b8a>] dump_stack+0x2e/0x3c [<000000000005e3da>] print_usage_bug+0x27e/0x290 [<000000000005ea9c>] mark_lock+0x6b0/0x6c0 [<000000000005f33e>] __lock_acquire+0x30a/0xed0 [<00000000000604ae>] lock_acquire+0x9a/0xc8 [<000000000035a326>] _spin_lock+0x4e/0x68 [<0000000000274486>] zfcp_qdio_reqid_check+0x46/0x178 [<000000000027469e>] zfcp_qdio_response_handler+0xe6/0x430 [<0000000000217bd2>] tiqdio_tl+0xd02/0x2120 [<000000000004123a>] tasklet_hi_action+0xae/0x19c [<0000000000040ae4>] __do_softirq+0xbc/0x180 [<000000000001fd58>] do_softirq+0xec/0xf0 [<0000000000040c38>] irq_exit+0x90/0xa8 [<0000000000206f40>] do_IRQ+0x144/0x16c [<0000000000020462>] io_no_vtime+0x16/0x1c [<0000000000019432>] cpu_idle+0x222/0x250 ([<0000000000019416>] cpu_idle+0x206/0x250) [<000000000001405a>] rest_init+0x5a/0x68 [<0000000000536998>] start_kernel+0x39c/0x3dc [<0000000000013046>] _stext+0x46/0x1000 Fix incorrect usage of fsf_req_list_lock. It's used in tasklet context (irqs on) as well as in irq context. Therefore use the spin_lock_irqsave variant to avoid deadlocks. Acked-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] zfcp: fix incorrect usage of erp_lockHeiko Carstens2006-07-031-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ================================= [ INFO: inconsistent lock state ] --------------------------------- inconsistent {hardirq-on-W} -> {in-hardirq-W} usage. swapper/0 [HC1[1]:SC0[0]:HE0:SE1] takes: (&adapter->erp_lock){+-..}, at: [<000000000026c7f8>] zfcp_erp_async_handler+0x3c/0x70 {hardirq-on-W} state was registered at: [<000000000005f33e>] __lock_acquire+0x30a/0xed0 [<00000000000604ae>] lock_acquire+0x9a/0xc8 [<000000000035a7ae>] _write_lock+0x4e/0x68 [<000000000026d822>] zfcp_erp_adapter_strategy_generic+0x286/0xd94 [<000000000026fd72>] zfcp_erp_strategy_do_action+0x91e/0x1a94 [<0000000000271a3a>] zfcp_erp_thread+0x21a/0x1568 [<0000000000019096>] kernel_thread_starter+0x6/0xc [<0000000000019090>] kernel_thread_starter+0x0/0xc irq event stamp: 12078 hardirqs last enabled at (12077): [<0000000000019416>] cpu_idle+0x206/0x250 hardirqs last disabled at (12078): [<0000000000020458>] io_no_vtime+0xc/0x1c softirqs last enabled at (12072): [<0000000000040b62>] __do_softirq+0x13a/0x180 softirqs last disabled at (12059): [<000000000001fd58>] do_softirq+0xec/0xf0 other info that might help us debug this: no locks held by swapper/0. stack backtrace: 00000000012bb648 0000000000000002 0000000000000000 00000000012bb758 00000000012bb6c0 0000000000399122 0000000000399122 0000000000016b0a 0000000000000000 0000000000000001 0000000000000000 00000000004660e8 0000000000000000 000000000000000d 00000000012bb6b8 00000000012bb730 0000000000368b90 0000000000016b0a 00000000012bb6b8 00000000012bb708 Call Trace: ([<0000000000016a26>] show_trace+0x76/0xdc) [<0000000000016b2c>] show_stack+0xa0/0xd0 [<0000000000016b8a>] dump_stack+0x2e/0x3c [<000000000005e3da>] print_usage_bug+0x27e/0x290 [<000000000005e934>] mark_lock+0x548/0x6c0 [<000000000005fb0c>] __lock_acquire+0xad8/0xed0 [<00000000000604ae>] lock_acquire+0x9a/0xc8 [<000000000035a662>] _write_lock_irqsave+0x62/0x80 [<000000000026c7f8>] zfcp_erp_async_handler+0x3c/0x70 [<0000000000279178>] zfcp_fsf_req_dispatch+0xd8/0x1fa8 [<000000000027e538>] zfcp_fsf_req_complete+0x104/0xe4c [<0000000000274534>] zfcp_qdio_reqid_check+0xf4/0x178 [<000000000027469e>] zfcp_qdio_response_handler+0xe6/0x430 [<0000000000219dd4>] tiqdio_thinint_handler+0xd20/0x213c [<000000000020229a>] do_adapter_IO+0xb2/0xc0 [<0000000000206f32>] do_IRQ+0x136/0x16c [<0000000000020462>] io_no_vtime+0x16/0x1c [<0000000000019432>] cpu_idle+0x222/0x250 ([<0000000000019416>] cpu_idle+0x206/0x250) [<000000000001405a>] rest_init+0x5a/0x68 [<0000000000536998>] start_kernel+0x39c/0x3dc [<0000000000013046>] _stext+0x46/0x1000 Fix incorrect usage of erp_lock. Using the write_lock() variant is wrong, since this might lead to deadlocks. Acked-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] lockdep: annotate qeth driverHeiko Carstens2006-07-031-0/+6
| | | | | | | | | | | | | Annotate the qeth driver which uses a private skb-queue-head that is safely used in hardirq context too. Has no effect on non-lockdep kernels. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] lockdep: s390 turn validator off in machine-check handlerHeiko Carstens2006-07-031-0/+3
| | | | | | | | | | | | | Machine checks on s390 are always enabled (except in the machine check handler itself). Therefore use lockdep_off()/on() in the machine check handler to avoid deadlocks in the lock validator. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] lockdep: irqtrace subsystem, s390 supportHeiko Carstens2006-07-032-5/+7
| | | | | | | | | | | irqtrace support for s390. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Remove obsolete #include <linux/config.h>Jörn Engel2006-06-3046-46/+0
| | | | | Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/devfs-2.6Linus Torvalds2006-06-297-17/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/devfs-2.6: (22 commits) [PATCH] devfs: Remove it from the feature_removal.txt file [PATCH] devfs: Last little devfs cleanups throughout the kernel tree. [PATCH] devfs: Rename TTY_DRIVER_NO_DEVFS to TTY_DRIVER_DYNAMIC_DEV [PATCH] devfs: Remove the tty_driver devfs_name field as it's no longer needed [PATCH] devfs: Remove the line_driver devfs_name field as it's no longer needed [PATCH] devfs: Remove the videodevice devfs_name field as it's no longer needed [PATCH] devfs: Remove the gendisk devfs_name field as it's no longer needed [PATCH] devfs: Remove the miscdevice devfs_name field as it's no longer needed [PATCH] devfs: Remove the devfs_fs_kernel.h file from the tree [PATCH] devfs: Remove devfs_remove() function from the kernel tree [PATCH] devfs: Remove devfs_mk_cdev() function from the kernel tree [PATCH] devfs: Remove devfs_mk_bdev() function from the kernel tree [PATCH] devfs: Remove devfs_mk_symlink() function from the kernel tree [PATCH] devfs: Remove devfs_mk_dir() function from the kernel tree [PATCH] devfs: Remove devfs_*_tape() functions from the kernel tree [PATCH] devfs: Remove devfs support from the sound subsystem [PATCH] devfs: Remove devfs support from the ide subsystem. [PATCH] devfs: Remove devfs support from the serial subsystem [PATCH] devfs: Remove devfs from the init code [PATCH] devfs: Remove devfs from the partition code ...
| * [PATCH] devfs: Rename TTY_DRIVER_NO_DEVFS to TTY_DRIVER_DYNAMIC_DEVGreg Kroah-Hartman2006-06-261-1/+1
| | | | | | | | | | | | | | | | | | | | I've always found this flag confusing. Now that devfs is no longer around, it has been renamed, and the documentation for when this flag should be used has been updated. Also fixes all drivers that use this flag. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] devfs: Remove the tty_driver devfs_name field as it's no longer neededGreg Kroah-Hartman2006-06-261-1/+0
| | | | | | | | | | | | Also fixes all drivers that set this field. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] devfs: Remove the gendisk devfs_name field as it's no longer neededGreg Kroah-Hartman2006-06-262-3/+0
| | | | | | | | | | | | | | And remove the now unneeded number field. Also fixes all drivers that set these fields. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] devfs: Remove the miscdevice devfs_name field as it's no longer neededGreg Kroah-Hartman2006-06-262-2/+0
| | | | | | | | | | | | Also fixes all drivers that set this field. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] devfs: Remove the devfs_fs_kernel.h file from the treeGreg Kroah-Hartman2006-06-262-2/+0
| | | | | | | | | | | | Also fixes up all files that #include it. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] devfs: Remove devfs_remove() function from the kernel treeGreg Kroah-Hartman2006-06-262-3/+0
| | | | | | | | | | | | Removes the devfs_remove() function and all callers of it. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] devfs: Remove devfs_mk_dir() function from the kernel treeGreg Kroah-Hartman2006-06-262-5/+0
| | | | | | | | | | | | Removes the devfs_mk_dir() function and all callers of it. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [S390] rework of channel measurement facility.Cornelia Huck2006-06-293-177/+468
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes for several channel measurement facility bugs: * Blocks copied from the hardware might not be consistent. Solve this by moving the copying into idle state and repeating the copying. * avg_sample_interval changed with every read, even though no new block was available. Solve this by storing a timestamp when the last new block was received. * Several locking issues. * Measurements were not reenabled after a disconnected device became available again. * Remove #defines for ioctls that were never implemented. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] add PAV support to the dasd driver.Horst Hummel2006-06-296-87/+222
| | | | | | | | | | | | | | | | | | Add support for parallel-access-volumes to the dasd driver. This allows concurrent access to dasd devices with multiple channel programs. Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] cio chpid offline.Cornelia Huck2006-06-293-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After setting a path to a dasd offline at the SE, I/O hangs on that dasd for 5 minutes, then continues. I/O for which an interrupt will not be reported after the channel path has been disabled was not terminated by the common I/O layer, causing the dasd MIH to hit after 5 minutes. Be more aggressive in terminating I/O after setting a channel path offline. Also make sure to generate a fake irb if the device driver issues an I/O request after being notified of the killed I/O and clear residual information from the irb before trying to start the delayed verification. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | Convert s390_collect_crw_info() in s390mach.c from being startedSerge E. Hallyn2006-06-291-3/+2
| | | | | | | | | | | | | | as a deprecated kernel_thread to a kthread. Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] dasd eer data format.Stefan Weinhuber2006-06-291-1/+1
| | | | | | | | | | | | | | | | | | The struct dasd_eer_header needs the packed attribute, or there will be 6 additional bytes of random data between the fixed header and the variable length part of the eer data. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] dasd whitespace and other cosmetics.Horst Hummel2006-06-2915-304/+173
| | | | | | | | | | | | | | | | Dasd code cleanup: 1) remove white space, 2) remove the emacs override sections, and 3) use kzalloc instead of kmalloc. Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] dasd_eckd_dump_sense bug.Horst Hummel2006-06-291-71/+74
| | | | | | | | | | | | | | | | | | | | The ccw dump function dasd_eckd_dump_ccw_range can crash because it does not take care about the IDAL flag in the ccw. Check for IDALs flag set in CCW and follow the indirect list to print the data that is refered by the ccw. Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] missing check in dasd_eer_open.Stefan Weinhuber2006-06-291-0/+2
| | | | | | | | | | | | | | Check the return value of kzalloc in dasd_eer_open. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] modular 3270 driver.Martin Schwidefsky2006-06-291-33/+34
| | | | | | | | | | | | | | | | | | | | | | The initial i/o to a 3270 device is done using the static module variables raw3270_init_data and raw3270_init_request. If the 3270 device driver is built as a module and gets loaded above 2GB, the initial i/o will fail because these variables will get addresses > 2GB. To make it work the two variables are moved to struct raw3270 and the data structure is allocated with GFP_DMA. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] cio async subchannel reprobe.Peter Oberparleiter2006-06-294-36/+72
| | | | | | | | | | | | | | | | | | Changes in the DASD driver require an asynchronous implementation of the subchannel reprobe loop. This loop was so far only used by the blacklisting mechanism but is now available to all CCW device drivers. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] ccwgroup device unregister.Cornelia Huck2006-06-291-7/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | Work around the problem that a device cannot be unregistered from driver_for_each_device() because of klist node refcounting: Get device after device owned by the driver to be unregistered with driver_find_device() and then unregister it. This works because driver_get_device() gets us out of the region of the elevated klist node refcount. driver_find_device() will always get the next device in the list after the found one has been unregistered. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] channel measurement fix.Cornelia Huck2006-06-291-1/+2
| | | | | | | | | | | | | | | | Specify correct sizeof() in chp_measurement_read() and return correct amount of read data. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] cio long busy in read configuration data.Peter Oberparleiter2006-06-291-1/+6
| | | | | | | | | | | | | | | | | | | | | | Trying to set a DASD root device online can fail under some circumstances with the message "Read configuration data returned error -5". The cause is that read configuration data incorrectly aborts with -EIO when it encounters a temporary busy condition at a storage server. Perform retry when encountering temporary busy conditions. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [PATCH] spin/rwlock init cleanupsIngo Molnar2006-06-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | locking init cleanups: - convert " = SPIN_LOCK_UNLOCKED" to spin_lock_init() or DEFINE_SPINLOCK() - convert rwlocks in a similar manner this patch was generated automatically. Motivation: - cleanliness - lockdep needs control of lock initialization, which the open-coded variants do not give - it's also useful for -rt and for lock debugging in general Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds2006-06-261-7/+7
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: typo fixes Clean up 'inline is not at beginning' warnings for usb storage Storage class should be first i386: Trivial typo fixes ixj: make ixj_set_tone_off() static spelling fixes fix paniced->panicked typos Spelling fixes for Documentation/atomic_ops.txt move acknowledgment for Mark Adler to CREDITS remove the bouncing email address of David Campbell
| * spelling fixesAndreas Mohr2006-06-261-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | acquired (aquired) contiguous (contigious) successful (succesful, succesfull) surprise (suprise) whether (weather) some other misspellings Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* | [PATCH] drivers: use list_move()Akinobu Mita2006-06-261-4/+3
|/ | | | | | | | | | | | | | | | | | | | This patch converts the combination of list_del(A) and list_add(A, B) to list_move(A, B) under drivers/. Acked-by: Corey Minyard <minyard@mvista.com> Cc: Ben Collins <bcollins@debian.org> Acked-by: Roland Dreier <rolandd@cisco.com> Cc: Alasdair Kergon <dm-devel@redhat.com> Cc: Gerd Knorr <kraxel@bytesex.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Frank Pavlic <fpavlic@de.ibm.com> Acked-by: Matthew Wilcox <matthew@wil.cx> Cc: Andrew Vasquez <linux-driver@qlogic.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Signed-off-by: Akinobu Mita <mita@miraclelinux.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] kernel/sys.c: cleanupsAdrian Bunk2006-06-251-2/+1
| | | | | | | | | | | | | | - proper prototypes for the following functions: - ctrl_alt_del() (in include/linux/reboot.h) - getrusage() (in include/linux/resource.h) - make the following needlessly global functions static: - kernel_restart_prepare() - kernel_kexec() [akpm@osdl.org: compile fix] Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [NET]: Merge TSO/UFO fields in sk_buffHerbert Xu2006-06-233-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | Having separate fields in sk_buff for TSO/UFO (tso_size/ufo_size) is not going to scale if we add any more segmentation methods (e.g., DCCP). So let's merge them. They were used to tell the protocol of a packet. This function has been subsumed by the new gso_type field. This is essentially a set of netdev feature bits (shifted by 16 bits) that are required to process a specific skb. As such it's easy to tell whether a given device can process a GSO skb: you just have to and the gso_type field and the netdev's features field. I've made gso_type a conjunction. The idea is that you have a base type (e.g., SKB_GSO_TCPV4) that can be modified further to support new features. For example, if we add a hardware TSO type that supports ECN, they would declare NETIF_F_TSO | NETIF_F_TSO_ECN. All TSO packets with CWR set would have a gso_type of SKB_GSO_TCPV4 | SKB_GSO_TCPV4_ECN while all other TSO packets would be SKB_GSO_TCPV4. This means that only the CWR packets need to be emulated in software. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds2006-06-2114-619/+204
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (85 commits) [SCSI] 53c700: remove reliance on deprecated cmnd fields [SCSI] hptiop: don't use cmnd->bufflen [SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver [SCSI] aacraid: small misc. cleanups [SCSI] aacraid: Update supported product information [SCSI] aacraid: Fix return code interpretation [SCSI] scsi_transport_sas: fix panic in sas_free_rphy [SCSI] remove RQ_SCSI_* flags [SCSI] remove scsi_request infrastructure [SCSI] mptfusion: change driver revision to 3.03.10 [SCSI] mptfc: abort of board reset leaves port dead requiring reboot [SCSI] mptfc: fix fibre channel infinite request/response loop [SCSI] mptfc: set fibre channel fw target missing timers to one second [SCSI] mptfusion: move fc event/reset handling to mptfc [SCSI] spi transport: don't allow dt to be set on SE or HVD buses [SCSI] aic7xxx: expose the bus setting to sysfs [SCSI] scsi: remove Documentation/scsi/cpqfc.txt [SCSI] drivers/scsi: Use ARRAY_SIZE macro [SCSI] Remove last page_address from dc395x.c [SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver ... Fixed up conflicts in drivers/message/fusion/mptbase.c manually (due to the sparc interrupt cleanups)
| * Merge ../linux-2.6James Bottomley2006-06-1028-703/+911
| |\
| * | [SCSI] zfcp: bump up version numberAndreas Herrmann2006-05-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Bump up version number, skip "4.6.0" because this might clash with zfcp version in certain distros. Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | [SCSI] zfcp: make use of fc_remote_port_delete when target port is unavailableAndreas Herrmann2006-05-283-4/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If zfcp's port erp fails we now call fc_remote_port_delete. This helps to avoid offlined scsi devices if scsi commands time out due to path failures. When an adapter erp fails we call fc_remote_port_delete for all ports on that adapter. Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | [SCSI] zfcp: evaluate plogi payload to set maxframe_size, supported_classes ↵Ralph Wuerthner2006-05-286-4/+34
| | | | | | | | | | | | | | | | | | | | | | | | of rports Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | [SCSI] zfcp: print bit error threshold data human readableRalph Wuerthner2006-05-281-4/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | Replace hex dump of bit error threshold data by log message showing bit error threshold data human readable. Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | [SCSI] zfcp: (cleanup) removed superfluous macros, struct members, typedefsAndreas Herrmann2006-05-287-122/+41
| | | | | | | | | | | | | | | | | | | | | | | | Removed some macros, struct members and typedefs which were unused or not necessary. Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | [SCSI] zfcp: (cleanup) kmalloc/kzalloc replacementAndreas Herrmann2006-05-283-20/+10
| | | | | | | | | | | | | | | | | | | | | Replace kmalloc/memset by kzalloc or kcalloc. Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | [SCSI] zfcp: (cleanup) remove useless commentsAndreas Herrmann2006-05-283-284/+0
| | | | | | | | | | | | | | | | | | | | | Removed some useless comments. Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | [SCSI] zfcp: (cleanup) shortened copyright and author informationAndreas Herrmann2006-05-2814-180/+59
| | | | | | | | | | | | | | | | | | | | | Copyright update, shortened file headers, shortened author information. Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* | | Merge git://git.infradead.org/hdrcleanup-2.6Linus Torvalds2006-06-201-183/+2
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.infradead.org/hdrcleanup-2.6: (63 commits) [S390] __FD_foo definitions. Switch to __s32 types in joystick.h instead of C99 types for consistency. Add <sys/types.h> to headers included for userspace in <linux/input.h> Move inclusion of <linux/compat.h> out of user scope in asm-x86_64/mtrr.h Remove struct fddi_statistics from user view in <linux/if_fddi.h> Move user-visible parts of drivers/s390/crypto/z90crypt.h to include/asm-s390 Revert include/media changes: Mauro says those ioctls are only used in-kernel(!) Include <linux/types.h> and use __uXX types in <linux/cramfs_fs.h> Use __uXX types in <linux/i2o_dev.h>, include <linux/ioctl.h> too Remove private struct dx_hash_info from public view in <linux/ext3_fs.h> Include <linux/types.h> and use __uXX types in <linux/affs_hardblocks.h> Use __uXX types in <linux/divert.h> for struct divert_blk et al. Use __u32 for elf_addr_t in <asm-powerpc/elf.h>, not u32. It's user-visible. Remove PPP_FCS from user view in <linux/ppp_defs.h>, remove __P mess entirely Use __uXX types in user-visible structures in <linux/nbd.h> Don't use 'u32' in user-visible struct ip_conntrack_old_tuple. Use __uXX types for S390 DASD volume label definitions which are user-visible S390 BIODASDREADCMB ioctl should use __u64 not u64 type. Remove unneeded inclusion of <linux/time.h> from <linux/ufs_fs.h> Fix private integer types used in V4L2 ioctls. ... Manually resolve conflict in include/linux/mtd/physmap.h
| * \ \ Merge branch 'master' of ↵David Woodhouse2006-05-241-1/+1
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: include/asm-powerpc/unistd.h include/asm-sparc/unistd.h include/asm-sparc64/unistd.h Signed-off-by: David Woodhouse <dwmw2@infradead.org>
| * | | | Move user-visible parts of drivers/s390/crypto/z90crypt.h to include/asm-s390David Woodhouse2006-05-081-183/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also remove Bob Burroughs' email address, since it's no longer valid. Acked-by: Eric D Rossman <edrossma@us.ibm.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | | | | Merge branch 'master' into upstreamJeff Garzik2006-06-082-3/+3
|\ \ \ \ \ | | |_|_|/ | |/| | |
| * | | | [PATCH] s390: cio non-unique path group idsPeter Oberparleiter2006-06-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> The path grouping can fail due to non-unique pathgroup-IDs. The source for the CPU-ID part of the ID was incorrectly specified on 64 bit systems. Additionally, the length of the ID was too large due to incorrect data packing declaration. Fix CPU-ID lowcore address and add missing packing declaration. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * | | | [PATCH] s390: irb memcpy argument swapCornelia Huck2006-06-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From: Cornelia Huck <cornelia.huck@de.ibm.com> Swapped memcpy arguments in ccw_device_irq() when doing basic sense after unsolicited interrupt. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | Merge branch 'upstream-fixes' into upstreamJeff Garzik2006-05-2615-624/+632
|\ \ \ \ \ | |/ / / / | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/s390/net/ctctty.c
OpenPOWER on IntegriCloud