summaryrefslogtreecommitdiffstats
path: root/drivers/s390
Commit message (Collapse)AuthorAgeFilesLines
* [SCSI] zfcp: prevent double decrement on host_busy while being busySwen Schillig2008-12-011-1/+1
| | | | | | | | | | | | | The zfcp_scsi_queuecommand was not acting according to the standard when the respective unit was not available. In this case an -EBUSY was returned, which is not valid in itself, and in addition scsi_done was called. This combination is not allowed and was leading to a double finish of the request and therefor double decrement of the host_busy counter. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: fix deadlock between wq triggered port scan and ERPSwen Schillig2008-12-012-2/+2
| | | | | | | | | | | | | Waiting for the ERP to be finished in a task running in the global kernel work-queue is a bad idea, especially if the ERP needs to run another job in this work-queue before it can finish. -> deadlock. This patch removes the necessity to wait for a finished ERP from the scan task and moves the job scheduling to the end of the ERP. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: eliminate race between validation and lockingSwen Schillig2008-12-011-4/+7
| | | | | | | | | | | | | | The check of having a valid pointer was performed before the processing was secured by the lock. Between those two steps the pointer can turn invalid. During further processing another value is used (referenced by the pointer described above) as a function pointer which is never verified to be valid either, resulting under some circumstances in an invalid function call. This patch is fixing both issues. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: verify for correct rport state before scanning for SCSI devsSwen Schillig2008-12-011-1/+3
| | | | | | | | | Prevent a SCSI target scan for a rport which have turned invalid in the meantime. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: returning an ERR_PTR where a NULL value is expectedSwen Schillig2008-12-011-2/+6
| | | | | | | | | | | | Aborting a SCSI cmnd might requrie to send a abort_fsf_cmnd. If the creation of this fsf_req fails an ERR_PTR is returned where a NULL value would be expected as an error indicator. This ERR_PTR is dereferenced as valid fsf_req in succeeding processing leading to an error. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Fix opening of wka portsChristof Schmitt2008-12-012-1/+3
| | | | | | | | | | | Running two wka_port_get calls in parallel could issue two open_port requests, overwriting the port handle. Don't issue an open_port for the state PORT_OPENING, and only read the data from GOOD responses. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Acked-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: fix remote port status checkMartin Petermann2008-12-011-2/+1
| | | | | | | | | | | For an incoming RSCN it was checked by the ZFCP_STATUS_PORT_DID_DID define to re-open a remote port or to test the connection. Since this define was re-used it was also necessary to replace that define with ZFCP_STATUS_PORT_PHYS_OPEN. Signed-off-by: Martin Petermann <martin@linux.vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds2008-11-154-2/+14
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] fix s390x_newuname [S390] dasd: log sense for fatal errors [S390] cpu topology: fix locking [S390] cio: Fix refcount after moving devices. [S390] ftrace: fix kernel stack backchain walking [S390] ftrace: disable tracing on idle psw [S390] lockdep: fix compile bug [S390] kvm_s390: Fix oops in virtio device detection with "mem=" [S390] sclp: emit error message if assign storage fails [S390] Fix range for add_active_range() in setup_memory()
| * [S390] dasd: log sense for fatal errorsStefan Haberland2008-11-141-0/+5
| | | | | | | | | | | | | | | | The logging of sense data for fatal errors was accidentally removed during Hyper PAV implementation. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * [S390] cio: Fix refcount after moving devices.Cornelia Huck2008-11-141-0/+4
| | | | | | | | | | | | | | | | | | | | | | In ccw_device_move_to_orphanage(), a replacing ccw_device is searched via get_{disc,orphaned}_ccwdev_by_dev_id() which obtain a reference on the returned ccw_device. This reference must be given up again after the device has been moved to its new parent. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * [S390] kvm_s390: Fix oops in virtio device detection with "mem="Christian Borntraeger2008-11-141-2/+2
| | | | | | | | | | | | | | | | | | | | The current virtio model on s390 has the descriptor page above the main memory. The guest virtio detection will oops if the mem= parameter is used to reduce/change the memory size. We have to use real_memory_size instead of max_pfn to detect the virtio descriptor pages. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
| * [S390] sclp: emit error message if assign storage failsHeiko Carstens2008-11-141-0/+3
| | | | | | | | | | Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [SCSI] zfcp: Fix hexdump data in s390dbf tracesChristof Schmitt2008-11-052-32/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | Fix multiple problems found in the hexdump data: - length calculation was wrong, traces were incomplete - FC payloads were dumped in different record than the output function tried to read - minor fixes in output - allow complete RSCN traces (up to 1024 bytes according to spec) Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* | [SCSI] zfcp: fix erp timeout cleanup for port open requestsMartin Petermann2008-11-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | If an open port fsf request times out (in erp) the corresponding erp_action member of the fsf request need to set to NULL. If the port structure will be removed later-on there will be still a reference in the fsf request to the non existing erp_action otherwise. Signed-off-by: Martin Petermann <martin.petermann@de.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* | [SCSI] zfcp: Wait for port scan to complete when setting adapter onlineChristof Schmitt2008-11-051-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | Attaching a unit immediately after setting the adapter online should be possible. The problem right now is that the port_scan runs from a workqueue and has not finished when the set_online call returns and the sysfs structures for the ports are not available yet. Fix that by waiting for the port scan to complete. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* | [SCSI] zfcp: Fix cast warningChristof Schmitt2008-11-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | Fix leftover from last typecast patch: drivers/s390/scsi/zfcp_aux.c: In function ‘zfcp_port_enqueue’: drivers/s390/scsi/zfcp_aux.c:629: warning: format ‘%016llx’ expects type ‘long long unsigned int’, but argument 3 has type ‘u64’ Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* | [SCSI] zfcp: Fix request list handling in error pathChristof Schmitt2008-11-051-11/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | Fix the handling of the request list in the error path: - Use irqsave for the lock as in the good path. - Before removing the request, check if it is still in the list, a call to dismiss_all might have changed the list in between. - zfcp_qdio_send does not change the queue counters on failure, trying revert something is wrong, so remove this. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* | [SCSI] zfcp: fix mempool usage for status_read requestsChristof Schmitt2008-11-051-0/+1
| | | | | | | | | | | | | | | | | | | | When allocating fsf requests without qtcb, store the pointer to the mempool in the fsf requests for later call to mempool_free. This codepath is only used by the status_read requests. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* | [SCSI] zfcp: fix req_list_locking.Heiko Carstens2008-11-051-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The per adapter req_list_lock must be held with interrupts disabled, otherwise we might end up with nice deadlocks as lockdep tells us (see below). zfcp 0.0.1804: QDIO problem occurred. ========================================================= [ INFO: possible irq lock inversion dependency detected ] 2.6.27-rc8-00035-g4a77035-dirty #86 --------------------------------------------------------- swapper/0 just changed the state of lock: (&adapter->erp_lock){++..}, at: [<00000000002c82ae>] zfcp_erp_adapter_reopen+0x4e/0x8c but this lock took another, hard-irq-unsafe lock in the past: (&adapter->req_list_lock){-+..} and interrupts could create inverse lock ordering between them. [tons of backtraces, but only the interesting part follows] the second lock's dependencies: -> (&adapter->req_list_lock){-+..} ops: 2280627634176 { initial-use at: [<0000000000071f10>] __lock_acquire+0x504/0x18bc [<000000000007335c>] lock_acquire+0x94/0xbc [<00000000003d7224>] _spin_lock_irqsave+0x6c/0xb0 [<00000000002cf684>] zfcp_fsf_req_dismiss_all+0x50/0x140 [<00000000002c87ee>] zfcp_erp_adapter_strategy_generic+0x66/0x3d0 [<00000000002c9498>] zfcp_erp_thread+0x88c/0x1318 [<000000000001b0d2>] kernel_thread_starter+0x6/0xc [<000000000001b0cc>] kernel_thread_starter+0x0/0xc in-softirq-W at: [<0000000000072172>] __lock_acquire+0x766/0x18bc [<000000000007335c>] lock_acquire+0x94/0xbc [<00000000003d7224>] _spin_lock_irqsave+0x6c/0xb0 [<00000000002ca73e>] zfcp_qdio_int_resp+0xbe/0x2ac [<000000000027a1d6>] qdio_kick_inbound_handler+0x82/0xa0 [<000000000027daba>] tiqdio_inbound_processing+0x62/0xf8 [<0000000000047ba4>] tasklet_action+0x100/0x1f4 [<0000000000048b5a>] __do_softirq+0xae/0x154 [<0000000000021e4a>] do_softirq+0xea/0xf0 [<00000000000485de>] irq_exit+0xde/0xe8 [<0000000000268c64>] do_IRQ+0x160/0x1fc [<00000000000261a2>] io_return+0x0/0x8 [<000000000001b8f8>] cpu_idle+0x17c/0x224 hardirq-on-W at: [<0000000000072190>] __lock_acquire+0x784/0x18bc [<000000000007335c>] lock_acquire+0x94/0xbc [<00000000003d702c>] _spin_lock+0x5c/0x9c [<00000000002caff6>] zfcp_fsf_req_send+0x3e/0x158 [<00000000002ce7fe>] zfcp_fsf_exchange_config_data+0x106/0x124 [<00000000002c8948>] zfcp_erp_adapter_strategy_generic+0x1c0/0x3d0 [<00000000002c98ea>] zfcp_erp_thread+0xcde/0x1318 [<000000000001b0d2>] kernel_thread_starter+0x6/0xc [<000000000001b0cc>] kernel_thread_starter+0x0/0xc } ... key at: [<0000000000e356c8>] __key.26629+0x0/0x8 Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christof Schmitt <christof.schmit@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* | [SCSI] zfcp: Dont clear reference from SCSI device to unitChristof Schmitt2008-11-051-8/+4
|/ | | | | | | | | | | | It is possible that a remote port has a problem, the SCSI device gets deleted after the rport timeout and then the timeout for pending SCSI commands trigger an abort. For this case, don't delete the reference from the SCSI device to the zfcp unit, so that we can still have the reference to issue an abort request. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2008-10-304-38/+12
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: amd8111e: Fix rx return code pktgen: fix multiple queue warning mac80211.h: fix kernel-doc excesses p54: fix build warnings ath5k: Reset key cache on interface up, thus fixing resume mac80211: correct warnings in minstrel rate control algorithm RFKILL: fix input layer initialisation p54: fix misbehavings when firmware can't be found dm9601: runtime mac address change support via-velocity: use driver string instead of dev->name before register_netdev() drivers/net/wan/syncppp: Fix unused-var warnings mlx4: Setting the correct offset for default mac address mlx4_en: remove duplicated #include ibm_newemac: Fix typo in flow control config option ehea: Detect 16GB hugepages for firmware restriction dmfe: check pci_alloc_consistent errors qeth: avoid skb_under_panic for malformatted inbound data qeth: remove unnecessary support ckeck in sysfs route6 qeth: fix offset error in non prealloc header path qeth: remove non-recover-thread checkings
| * qeth: avoid skb_under_panic for malformatted inbound dataUrsula Braun2008-10-271-5/+8
| | | | | | | | | | | | | | | | | | | | To make the qeth driver more robust in case of malformatted inbound packets due to hardware problems, an additional check for OSN-card-type is added for OSN-type packets. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * qeth: remove unnecessary support ckeck in sysfs route6Frank Blaschka2008-10-271-7/+0
| | | | | | | | | | | | | | | | Removing this check improves usability because you do not have to set the device online to initially set ipv6 routing option. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * qeth: fix offset error in non prealloc header pathFrank Blaschka2008-10-271-1/+2
| | | | | | | | | | | | | | | | For the non preallocated qeth header code path we should not change the header length. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * qeth: remove non-recover-thread checkingsUrsula Braun2008-10-272-25/+2
| | | | | | | | | | | | | | | | | | | | IP-threads have been removed from the qeth driver. Only the recover-thread is left over. This makes checkings for non-recover threads superfluous. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* | [S390] tape: disable interrupts in tape_open and tape_releaseFrank Munzert2008-10-281-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Get tape device lock with interrupts disabled. Otherwise lockdep will issue a warning similar to: ================================= [ INFO: inconsistent lock state ] 2.6.27 #1 --------------------------------- inconsistent {in-hardirq-W} -> {hardirq-on-W} usage. vol_id/2903 [HC0[0]:SC0[0]:HE1:SE1] takes: (sch->lock){++..}, at: [<000003e00004c7a2>] tape_open+0x42/0x1a4 [tape] {in-hardirq-W} state was registered at: [<000000000007ce5c>] __lock_acquire+0x894/0xa74 [<000000000007d0ce>] lock_acquire+0x92/0xb8 [<0000000000345154>] _spin_lock+0x5c/0x9c [<0000000000202264>] do_IRQ+0x124/0x1f0 [<0000000000026610>] io_return+0x0/0x8 irq event stamp: 847 hardirqs last enabled at (847): [<000000000007aca6>] trace_hardirqs_on+0x2a/0x38 hardirqs last disabled at (846): [<0000000000076ca2>] trace_hardirqs_off+0x2a/0x38 softirqs last enabled at (0): [<000000000004909e>] copy_process+0x43e/0x11f4 softirqs last disabled at (0): [<0000000000000000>] 0x0 other info that might help us debug this: 1 lock held by vol_id/2903: #0: (&bdev->bd_mutex){--..}, at: [<000000000010e0f4>] do_open+0x78/0x358 stack backtrace: CPU: 1 Not tainted 2.6.27 #1}, Process vol_id (pid: 2903, task: 000000003d4c0000, ksp: 000000003d4e3b10) 0400000000000000 000000003d4e3830 0000000000000002 0000000000000000 000000003d4e38d0 000000003d4e3848 000000003d4e3848 00000000000168a8 0000000000000000 000000003d4e3b10 0000000000000000 0000000000000000 000000003d4e3830 000000000000000c 000000003d4e3830 000000003d4e38a0 000000000034aa98 00000000000168a8 000000003d4e3830 000000003d4e3880 Call Trace: ([<000000000001681c>] show_trace+0x138/0x158) [<0000000000016902>] show_stack+0xc6/0xf8 [<00000000000170d4>] dump_stack+0xb0/0xc0 [<0000000000078810>] print_usage_bug+0x1e8/0x228 [<000000000007a71c>] mark_lock+0xb14/0xd24 [<000000000007cd5a>] __lock_acquire+0x792/0xa74 [<000000000007d0ce>] lock_acquire+0x92/0xb8 [<0000000000345154>] _spin_lock+0x5c/0x9c [<000003e00004c7a2>] tape_open+0x42/0x1a4 [tape] [<000003e00005185c>] tapeblock_open+0x98/0xd0 [tape] Signed-off-by: Frank Munzert <munzert@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] tape block: complete request with correct lockingFrank Munzert2008-10-281-2/+4
| | | | | | | | | | | | | | | | __blk_end_request must be called with request queue lock held. We need to use blk_end_request rather than __blk_end_request. Signed-off-by: Frank Munzert <munzert@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] qdio: remove incorrect memsetJan Glauber2008-10-281-13/+6
| | | | | | | | | | | | | | | | Remove the memset since zeroing the string is not needed and use snprintf instead of sprintf. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] qdio: prevent double qdio shutdown in case of I/O errorsJan Glauber2008-10-281-1/+0
|/ | | | | | | | | | In case of I/O errors on a qdio subchannel qdio_shutdown may be called twice by the qdio driver and by zfcp. Remove the superfluous shutdown from qdio and let the upper layer driver handle the error condition. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* Merge branch 'v28-range-hrtimers-for-linus-v2' of ↵Linus Torvalds2008-10-231-3/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'v28-range-hrtimers-for-linus-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (37 commits) hrtimers: add missing docbook comments to struct hrtimer hrtimers: simplify hrtimer_peek_ahead_timers() hrtimers: fix docbook comments DECLARE_PER_CPU needs linux/percpu.h hrtimers: fix typo rangetimers: fix the bug reported by Ingo for real rangetimer: fix BUG_ON reported by Ingo rangetimer: fix x86 build failure for the !HRTIMERS case select: fix alpha OSF wrapper select: fix alpha OSF wrapper hrtimer: peek at the timer queue just before going idle hrtimer: make the futex() system call use the per process slack value hrtimer: make the nanosleep() syscall use the per process slack hrtimer: fix signed/unsigned bug in slack estimator hrtimer: show the timer ranges in /proc/timer_list hrtimer: incorporate feedback from Peter Zijlstra hrtimer: add a hrtimer_start_range() function hrtimer: another build fix hrtimer: fix build bug found by Ingo hrtimer: make select() and poll() use the hrtimer range feature ...
| * Merge branch 'timers/range-hrtimers' into v28-range-hrtimers-for-linus-v2Thomas Gleixner2008-10-221-3/+3
| |\ | | | | | | | | | | | | | | | | | | | | | Conflicts: kernel/time/tick-sched.c Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| | * Merge commit 'linus/master' into merge-linusArjan van de Ven2008-10-1768-1574/+1975
| | |\ | | | | | | | | | | | | | | | | | | | | Conflicts: arch/x86/kvm/i8254.c
| | * | hrtimer: convert s390 to the new hrtimer apisArjan van de Ven2008-09-051-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to be able to do range hrtimers we need to use accessor functions to the "expire" member of the hrtimer struct. This patch converts s390 to these accessors. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
* | | | [PATCH] sanitize blkdev_get() and friendsAl Viro2008-10-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * get rid of fake struct file/struct dentry in __blkdev_get() * merge __blkdev_get() and do_open() * get rid of flags argument of blkdev_get() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | | | [PATCH] pass fmode_t to blkdev_put()Al Viro2008-10-211-1/+1
| | | | | | | | | | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | | | [PATCH] switch tape_blockAl Viro2008-10-211-16/+13
| | | | | | | | | | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | | | [PATCH] switch dcssblkAl Viro2008-10-211-11/+10
| | | | | | | | | | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | | | [PATCH] switch dasdAl Viro2008-10-213-25/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | ->compat_ioctl() actually had been useless here; generic logics works fine. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | | | [PATCH] beginning of methods conversionAl Viro2008-10-213-9/+9
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To keep the size of changesets sane we split the switch by drivers; to keep the damn thing bisectable we do the following: 1) rename the affected methods, add ones with correct prototypes, make (few) callers handle both. That's this changeset. 2) for each driver convert to new methods. *ALL* drivers are converted in this series. 3) kill the old (renamed) methods. Note that it _is_ a flagday; all in-tree drivers are converted and by the end of this series no trace of old methods remain. The only reason why we do that this way is to keep the damn thing bisectable and allow per-driver debugging if anything goes wrong. New methods: open(bdev, mode) release(disk, mode) ioctl(bdev, mode, cmd, arg) /* Called without BKL */ compat_ioctl(bdev, mode, cmd, arg) locked_ioctl(bdev, mode, cmd, arg) /* Called with BKL, legacy */ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | | Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds2008-10-174-0/+49
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: remove __generic_unplug_device() from exports block: move q->unplug_work initialization blktrace: pass zfcp driver data blktrace: add support for driver data block: fix current kernel-doc warnings block: only call ->request_fn when the queue is not stopped block: simplify string handling in elv_iosched_store() block: fix kernel-doc for blk_alloc_devt() block: fix nr_phys_segments miscalculation bug block: add partition attribute for partition number block: add BIG FAT WARNING to CONFIG_DEBUG_BLOCK_EXT_DEVT softirq: Add support for triggering softirq work on softirqs.
| * | | blktrace: pass zfcp driver dataStefan Raspl2008-10-174-0/+49
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch writes the channel and fabric latencies in nanoseconds per request via blktrace for later analysis. The utilization of the inbound and outbound adapter queue is also reported. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Martin Peschke <mp3@de.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds2008-10-173-3/+3
|\ \ \ | |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (39 commits) [SCSI] sd: fix compile failure with CONFIG_BLK_DEV_INTEGRITY=n libiscsi: fix locking in iscsi_eh_device_reset libiscsi: check reason why we are stopping iscsi session to determine error value [SCSI] iscsi_tcp: return a descriptive error value during connection errors [SCSI] libiscsi: rename host reset to target reset [SCSI] iscsi class: fix endpoint id handling [SCSI] libiscsi: Support drivers initiating session removal [SCSI] libiscsi: fix data corruption when target has to resend data-in packets [SCSI] sd: Switch kernel printing level for DIF messages [SCSI] sd: Correctly handle all combinations of DIF and DIX [SCSI] sd: Always print actual protection_type [SCSI] sd: Issue correct protection operation [SCSI] scsi_error: fix target reset handling [SCSI] lpfc 8.2.8 v2 : Add statistical reporting control and additional fc vendor events [SCSI] lpfc 8.2.8 v2 : Add sysfs control of target queue depth handling [SCSI] lpfc 8.2.8 v2 : Revert target busy in favor of transport disrupted [SCSI] scsi_dh_alua: remove REQ_NOMERGE [SCSI] lpfc 8.2.8 : update driver version to 8.2.8 [SCSI] lpfc 8.2.8 : Add MSI-X support [SCSI] lpfc 8.2.8 : Update driver to use new Host byte error code DID_TRANSPORT_DISRUPTED ...
| * | [SCSI] block: separate failfast into multiple bits.Mike Christie2008-10-133-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Multipath is best at handling transport errors. If it gets a device error then there is not much the multipath layer can do. It will just access the same device but from a different path. This patch breaks up failfast into device, transport and driver errors. The multipath layers (md and dm mutlipath) only ask the lower levels to fast fail transport errors. The user of failfast, read ahead, will ask to fast fail on all errors. Note that blk_noretry_request will return true if any failfast bit is set. This allows drivers that do not support the multipath failfast bits to continue to fail on any failfast error like before. Drivers like scsi that are able to fail fast specific errors can check for the specific fail fast type. In the next patch I will convert scsi. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds2008-10-164-18/+15
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (46 commits) UIO: Fix mapping of logical and virtual memory UIO: add automata sercos3 pci card support UIO: Change driver name of uio_pdrv UIO: Add alignment warnings for uio-mem Driver core: add bus_sort_breadthfirst() function NET: convert the phy_device file to use bus_find_device_by_name kobject: Cleanup kobject_rename and !CONFIG_SYSFS kobject: Fix kobject_rename and !CONFIG_SYSFS sysfs: Make dir and name args to sysfs_notify() const platform: add new device registration helper sysfs: use ilookup5() instead of ilookup5_nowait() PNP: create device attributes via default device attributes Driver core: make bus_find_device_by_name() more robust usb: turn dev_warn+WARN_ON combos into dev_WARN debug: use dev_WARN() rather than WARN_ON() in device_pm_add() debug: Introduce a dev_WARN() function sysfs: fix deadlock device model: Do a quickcheck for driver binding before doing an expensive check Driver core: Fix cleanup in device_create_vargs(). Driver core: Clarify device cleanup. ...
| * | | device create: s390: convert device_create_drvdata to device_createGreg Kroah-Hartman2008-10-164-18/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that device_create() has been audited, rename things back to the original call to be sane. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | | misc: replace __FUNCTION__ with __func__Harvey Harrison2008-10-161-1/+1
|/ / / | | | | | | | | | | | | | | | | | | | | | __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2008-10-141-1/+1
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: qlge: Fix page size ifdef test. net: Rationalise email address: Network Specific Parts dsa: fix compile bug on s390 netns: mib6 section fixlet enic: Fix Kconfig headline description de2104x: wrong MAC address fix s390: claw compile fixlet net: export genphy_restart_aneg cxgb3: extend copyrights to 2008 cxgb3: update driver version net/phy: add missing kernel-doc pktgen: fix skb leak in case of failure mISDN/dsp_cmx.c: fix size checks misdn: use nonseekable_open() net: fix driver build errors due to missing net/ip6_checksum.h include
| * | | s390: claw compile fixletAlexey Dobriyan2008-10-131-1/+1
| |/ / | | | | | | | | | | | | Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | fs3270: Correct error returnsAlan Cox2008-10-131-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | Drop the kernel lock further and also correct cases where we set rc to an error code, and then return 0 Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | fs3270: remove extra locksAlan Cox2008-10-131-5/+1
| | | | | | | | | | | | | | | | | | | | | | | | get_current_tty now does internal locking and returns a referenced object, thus our use of tty_mutex here can go away. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
OpenPOWER on IntegriCloud