summaryrefslogtreecommitdiffstats
path: root/drivers/s390/scsi
Commit message (Collapse)AuthorAgeFilesLines
* scsi: drop reason argument from ->change_queue_depthChristoph Hellwig2014-11-241-9/+2
| | | | | | | | | | | Drop the now unused reason argument from the ->change_queue_depth method. Also add a return value to scsi_adjust_queue_depth, and rename it to scsi_change_queue_depth now that it can be used as the default ->change_queue_depth implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de>
* scsi: avoid ->change_queue_depth indirection for queue full trackingChristoph Hellwig2014-11-241-13/+2
| | | | | | | | | | | | | | | | | All drivers use the implementation for ramping the queue up and down, so instead of overloading the change_queue_depth method call the implementation diretly if the driver opts into it by setting the track_queue_depth flag in the host template. Note that a few drivers validated the new queue depth in their change_queue_depth method, but as we never go over the queue depth set during slave_configure or the sysfs file this isn't nessecary and can safely be removed. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Venkatesh Srinivas <venkateshs@google.com>
* zfcp: auto port scan resiliencyMartin Peschke2014-11-206-14/+90
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch improves the Fibre Channel port scan behaviour of the zfcp lldd. Without it the zfcp device driver may churn up the storage area network by excessive scanning and scan bursts, particularly in big virtual server environments, potentially resulting in interference of virtual servers and reduced availability of storage connectivity. The two main issues as to the zfcp device drivers automatic port scan in virtual server environments are frequency and simultaneity. On the one hand, there is no point in allowing lots of ports scans in a row. It makes sense, though, to make sure that a scan is conducted eventually if there has been any indication for potential SAN changes. On the other hand, lots of virtual servers receiving the same indication for a SAN change had better not attempt to conduct a scan instantly, that is, at the same time. Hence this patch has a two-fold approach for better port scanning: the introduction of a rate limit to amend frequency issues, and the introduction of a short random backoff to amend simultaneity issues. Both approaches boil down to deferred port scans, with delays comprising parts for both approaches. The new port scan behaviour is summarised best by: NEW: NEW: no_auto_port_rescan random rate flush backoff limit =wait adapter resume/thaw yes yes no yes* adapter online (user) no yes no yes* port rescan (user) no no no yes adapter recovery (user) yes yes yes no adapter recovery (other) yes yes yes no incoming ELS yes yes yes no incoming ELS lost yes yes yes no Implementation is straight-forward by converting an existing worker to a delayed worker. But care is needed whenever that worker is going to be flushed (in order to make sure work has been completed), since a flush operation cancels the timer set up for deferred execution (see * above). There is a small race window whenever a port scan work starts running up to the point in time of storing the time stamp for that port scan. The impact is negligible. Closing that gap isn't trivial, though, and would the destroy the beauty of a simple work-to-delayed-work conversion. Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
* zfcp: bring back unit sysfs attributes for automatic LUN scanSteffen Maier2014-11-201-3/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Through sysfs attributes, zfcp unit objects provide a trigger for manual LUN recovery and export information for problem determination. With commit f8210e34887e1feb977a9b6b8caa086855af40c9 "[SCSI] zfcp: Allow midlayer to scan for LUNs when running in NPIV mode" and when attaching SCSI devices through this new optional method, no more zfcp unit objects are allocated for such SCSI devices. Hence, the above-mentioned trigger and information were missing. The information and context is located in SCSI transport device data since b62a8d9b45b971a67a0f8413338c230e3117dff5 "[SCSI] zfcp: Use SCSI device data zfcp_scsi_dev instead of zfcp_unit" 57c237731b92fadc7d44824276313ec330b1989b "[SCSI] zfcp: Add zfcp private struct as SCSI device driver data" Hence, introduce the trigger and the information unconditionally for all SCSI devices attached through zfcp. We prefix the attribute names with 'zfcp_' to prevent collisions and to avoid mix-ups such as with the common 'state' attribute. Since some of the new attribute views do not need zfcp_port in the ZFCP_DEFINE_SCSI_ATTR helper macro, remove zfcp_port to avoid compiler warnings on unused variable. It's easy to open code the conversion from zfcp_scsi_dev to zfcp_port for the two already existing attributes hba_id and wwpn. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
* zfcp: remove access control tables interface (port leftovers)Martin Peschke2014-11-203-12/+2
| | | | | | | | | | | | | | | | | | This patch removes some leftovers for commit 663e0890e31cb85f0cca5ac1faaee0d2d52880b5 "[SCSI] zfcp: remove access control tables interface". The "access denied" case for ports is gone, as well. The corresponding flag was cleared, but never set. So clean it up. Sysfs flag is kept, though, for backward-compatibility. Now it returns always 0. Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
* scsi: don't set tagging state from scsi_adjust_queue_depthChristoph Hellwig2014-11-121-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Remove the tagged argument from scsi_adjust_queue_depth, and just let it handle the queue depth. For most drivers those two are fairly separate, given that most modern drivers don't care about the SCSI "tagged" status of a command at all, and many old drivers allow queuing of multiple untagged commands in the driver. Instead we start out with the ->simple_tags flag set before calling ->slave_configure, which is how all drivers actually looking at ->simple_tags except for one worke anyway. The one other case looks broken, but I've kept the behavior as-is for now. Except for that we only change ->simple_tags from the ->change_queue_type, and when rejecting a tag message in a single driver, so keeping this churn out of scsi_adjust_queue_depth is a clear win. Now that the usage of scsi_adjust_queue_depth is more obvious we can also remove all the trivial instances in ->slave_alloc or ->slave_configure that just set it to the cmd_per_lun default. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: remove abuses of scsi_populate_tagChristoph Hellwig2014-11-121-13/+1
| | | | | | | | | | | | | Unless we want to build a SPI tag message we should just check SCMD_TAGGED instead of reverse engineering a tag type through the use of scsi_populate_tag_msg. Also rename the function to spi_populate_tag_msg, make it behave like the other spi message helpers, and move it to the spi transport class. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de>
* Merge branch 'for-linus' of ↵Linus Torvalds2014-08-071-28/+21
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "Mostly cleanups and bug-fixes, with two exceptions. The first is lazy flushing of I/O-TLBs for PCI to improve performance, the second is software dirty bits in the pmd for the madvise-free implementation" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (24 commits) s390/locking: Reenable optimistic spinning s390/mm: implement dirty bits for large segment table entries KVM: s390/mm: Fix page table locking vs. split pmd lock s390/dasd: fix camel case s390/3215: fix hanging console issue s390/irq: improve displayed interrupt order in /proc/interrupts s390/seccomp: fix error return for filtered system calls s390/pci: introduce lazy IOTLB flushing for DMA unmap dasd: fix error recovery for alias devices during format dasd: fix list_del corruption during format dasd: fix unresponsive device during format dasd: use aliases for formatted devices during format s390/pci: fix kmsg component s390/kdump: Return NOTIFY_OK for all actions other than MEM_GOING_OFFLINE s390/watchdog: Fix module name in Kconfig help text s390/dasd: replace seq_printf by seq_puts s390/dasd: replace pr_warning by pr_warn s390/dasd: Move EXPORT_SYMBOL after function/variable s390/dasd: remove unnecessary null test before debugfs_remove s390/zfcp: use qdio buffer helpers ...
| * s390/zfcp: use qdio buffer helpersSebastian Ott2014-07-221-28/+21
| | | | | | | | | | | | | | | | | | | | | | Use qdio buffer helpers to manage the buffers used for the request and response queues. No functional change. Reviewed-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | scsi: use 64-bit LUNsHannes Reinecke2014-07-172-3/+4
|/ | | | | | | | | | | | | The SCSI standard defines 64-bit values for LUNs, and large arrays employing large or hierarchical LUN numbers become more and more common. So update the linux SCSI stack to use 64-bit LUN numbers. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Ewan Milne <emilne@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* Merge branch 'for-linus' of ↵Linus Torvalds2013-11-151-3/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual earth-shaking, news-breaking, rocket science pile from trivial.git" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits) doc: usb: Fix typo in Documentation/usb/gadget_configs.txt doc: add missing files to timers/00-INDEX timekeeping: Fix some trivial typos in comments mm: Fix some trivial typos in comments irq: Fix some trivial typos in comments NUMA: fix typos in Kconfig help text mm: update 00-INDEX doc: Documentation/DMA-attributes.txt fix typo DRM: comment: `halve' -> `half' Docs: Kconfig: `devlopers' -> `developers' doc: typo on word accounting in kprobes.c in mutliple architectures treewide: fix "usefull" typo treewide: fix "distingush" typo mm/Kconfig: Grammar s/an/a/ kexec: Typo s/the/then/ Documentation/kvm: Update cpuid documentation for steal time and pv eoi treewide: Fix common typo in "identify" __page_to_pfn: Fix typo in comment Correct some typos for word frequency clk: fixed-factor: Fix a trivial typo ...
| * treewide: Fix common typo in "identify"Maxime Jayat2013-10-141-3/+3
| | | | | | | | | | | | | | | | Correct common misspelling of "identify" as "indentify" throughout the kernel Signed-off-by: Maxime Jayat <maxime@artisandeveloppeur.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | s390/s390dbf: use debug_level_enabled() where applicableHendrik Brueckner2013-10-241-2/+2
|/ | | | | | | | Refactor direct debug level comparisons with the (internal) s390db->level member. Use the debug_level_enabled() function instead. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2013-09-035-22/+12
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull first round of SCSI updates from James Bottomley: "This patch set is a set of driver updates (ufs, zfcp, lpfc, mpt2/3sas, qla4xxx, qla2xxx [adding support for ISP8044 + other things]). We also have a new driver: esas2r which has a number of static checker problems, but which I expect to resolve over the -rc course of 3.12 under the new driver exception. We also have the error return that were discussed at LSF" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (118 commits) [SCSI] sg: push file descriptor list locking down to per-device locking [SCSI] sg: checking sdp->detached isn't protected when open [SCSI] sg: no need sg_open_exclusive_lock [SCSI] sg: use rwsem to solve race during exclusive open [SCSI] scsi_debug: fix logical block provisioning support when unmap_alignment != 0 [SCSI] scsi_debug: fix endianness bug in sdebug_build_parts() [SCSI] qla2xxx: Update the driver version to 8.06.00.08-k. [SCSI] qla2xxx: print MAC via %pMR. [SCSI] qla2xxx: Correction to message ids. [SCSI] qla2xxx: Correctly print out/in mailbox registers. [SCSI] qla2xxx: Add a new interface to update versions. [SCSI] qla2xxx: Move queue depth ramp down message to i/o debug level. [SCSI] qla2xxx: Select link initialization option bits from current operating mode. [SCSI] qla2xxx: Add loopback IDC-TIME-EXTEND aen handling support. [SCSI] qla2xxx: Set default critical temperature value in cases when ISPFX00 firmware doesn't provide it [SCSI] qla2xxx: QLAFX00 make over temperature AEN handling informational, add log for normal temperature AEN [SCSI] qla2xxx: Correct Interrupt Register offset for ISPFX00 [SCSI] qla2xxx: Remove handling of Shutdown Requested AEN from qlafx00_process_aen(). [SCSI] qla2xxx: Send all AENs for ISPFx00 to above layers. [SCSI] qla2xxx: Add changes in initialization for ISPFX00 cards with BIOS ...
| * [SCSI] zfcp: enable FCP hardware data router by defaultSteffen Maier2013-09-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | Enabling the data router support by default can increase performance in certain situations. It is safe to do so and tolerated in LPAR and under z/VM in case there is no data router support in that environment. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] zfcp: dead code removalMartin Peschke2013-09-032-11/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Get rid of unused function zfcp_fsf_get_req and corresponding prototype definition. Commit a54ca0f62f953898b05549391ac2a8a4dad6482b in v2.6.28 "[SCSI] zfcp: Redesign of the debug tracing for HBA records." accidentally introduced this code which was dead in the first place. Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] zfcp: cleanup use of obsolete strict_strto* functionsMartin Peschke2013-09-032-8/+8
| | | | | | | | | | | | | | | | | | strict_strtoul and friends are obsolete. Use kstrtoul functions instead. Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] zfcp: consistently use appropriate SBAL flag definitionsMartin Peschke2013-09-031-1/+2
| | | | | | | | | | | | | | | | minor cleanup for status read request Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* | [SCSI] zfcp: remove access control tables interface (keep sysfs files)Martin Peschke2013-08-221-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By popular demand, this patch brings back a couple of sysfs attributes removed by commit 663e0890e31cb85f0cca5ac1faaee0d2d52880b5 "[SCSI] zfcp: remove access control tables interface". The content has been irrelevant for years, but the files must be there forever for whatever user space tools that may rely on them. Since these files always return a constant value, a new stripped down show-macro was required. Otherwise build warnings would have been introduced. Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* | [SCSI] zfcp: fix schedule-inside-lock in scsi_device list loopsMartin Peschke2013-08-221-7/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BUG: sleeping function called from invalid context at kernel/workqueue.c:2752 in_atomic(): 1, irqs_disabled(): 1, pid: 360, name: zfcperp0.0.1700 CPU: 1 Not tainted 3.9.3+ #69 Process zfcperp0.0.1700 (pid: 360, task: 0000000075b7e080, ksp: 000000007476bc30) <snip> Call Trace: ([<00000000001165de>] show_trace+0x106/0x154) [<00000000001166a0>] show_stack+0x74/0xf4 [<00000000006ff646>] dump_stack+0xc6/0xd4 [<000000000017f3a0>] __might_sleep+0x128/0x148 [<000000000015ece8>] flush_work+0x54/0x1f8 [<00000000001630de>] __cancel_work_timer+0xc6/0x128 [<00000000005067ac>] scsi_device_dev_release_usercontext+0x164/0x23c [<0000000000161816>] execute_in_process_context+0x96/0xa8 [<00000000004d33d8>] device_release+0x60/0xc0 [<000000000048af48>] kobject_release+0xa8/0x1c4 [<00000000004f4bf2>] __scsi_iterate_devices+0xfa/0x130 [<000003ff801b307a>] zfcp_erp_strategy+0x4da/0x1014 [zfcp] [<000003ff801b3caa>] zfcp_erp_thread+0xf6/0x2b0 [zfcp] [<000000000016b75a>] kthread+0xf2/0xfc [<000000000070c9de>] kernel_thread_starter+0x6/0xc [<000000000070c9d8>] kernel_thread_starter+0x0/0xc Apparently, the ref_count for some scsi_device drops down to zero, triggering device removal through execute_in_process_context(), while the lldd error recovery thread iterates through a scsi device list. Unfortunately, execute_in_process_context() decides to immediately execute that device removal function, instead of scheduling asynchronous execution, since it detects process context and thinks it is safe to do so. But almost all calls to shost_for_each_device() in our lldd are inside spin_lock_irq, even in thread context. Obviously, schedule() inside spin_lock_irq sections is a bad idea. Change the lldd to use the proper iterator function, __shost_for_each_device(), in combination with required locking. Occurences that need to be changed include all calls in zfcp_erp.c, since those might be executed in zfcp error recovery thread context with a lock held. Other occurences of shost_for_each_device() in zfcp_fsf.c do not need to be changed (no process context, no surrounding locking). The problem was introduced in Linux 2.6.37 by commit b62a8d9b45b971a67a0f8413338c230e3117dff5 "[SCSI] zfcp: Use SCSI device data zfcp_scsi_dev instead of zfcp_unit". Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Cc: stable@vger.kernel.org #2.6.37+ Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* | [SCSI] zfcp: fix lock imbalance by reworking request queue lockingMartin Peschke2013-08-221-6/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds wait_event_interruptible_lock_irq_timeout(), which is a straight-forward descendant of wait_event_interruptible_timeout() and wait_event_interruptible_lock_irq(). The zfcp driver used to call wait_event_interruptible_timeout() in combination with some intricate and error-prone locking. Using wait_event_interruptible_lock_irq_timeout() as a replacement nicely cleans up that locking. This rework removes a situation that resulted in a locking imbalance in zfcp_qdio_sbal_get(): BUG: workqueue leaked lock or atomic: events/1/0xffffff00/10 last function: zfcp_fc_wka_port_offline+0x0/0xa0 [zfcp] It was introduced by commit c2af7545aaff3495d9bf9a7608c52f0af86fb194 "[SCSI] zfcp: Do not wait for SBALs on stopped queue", which had a new code path related to ZFCP_STATUS_ADAPTER_QDIOUP that took an early exit without a required lock being held. The problem occured when a special, non-SCSI I/O request was being submitted in process context, when the adapter's queues had been torn down. In this case the bug surfaced when the Fibre Channel port connection for a well-known address was closed during a concurrent adapter shut-down procedure, which is a rare constellation. This patch also fixes these warnings from the sparse tool (make C=1): drivers/s390/scsi/zfcp_qdio.c:224:12: warning: context imbalance in 'zfcp_qdio_sbal_check' - wrong count at exit drivers/s390/scsi/zfcp_qdio.c:244:5: warning: context imbalance in 'zfcp_qdio_sbal_get' - unexpected unlock Last but not least, we get rid of that crappy lock-unlock-lock sequence at the beginning of the critical section. It is okay to call zfcp_erp_adapter_reopen() with req_q_lock held. Reported-by: Mikulas Patocka <mpatocka@redhat.com> Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Cc: stable@vger.kernel.org #2.6.35+ Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] zfcp: status read buffers on first adapter open with link downSteffen Maier2013-05-312-8/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 64deb6efdc5504ce97b5c1c6f281fffbc150bd93 "[SCSI] zfcp: Use status_read_buf_num provided by FCP channel" started using a value returned by the channel but only evaluated the value if the fabric link is up. Commit 8d88cf3f3b9af4713642caeb221b6d6a42019001 "[SCSI] zfcp: Update status read mempool" introduced mempool resizings based on the above value. On setting an FCP device online for the very first time since boot, a new zeroed adapter object is allocated. If the link is down, the number of status read requests remains zero. Since just the config data exchange is incomplete, we proceed with adapter open recovery. However, we unconditionally call mempool_resize with adapter->stat_read_buf_num == 0 in this case. This causes a kernel message "kernel BUG at mm/mempool.c:131!" in process "zfcperp<FCP-device-bus-ID>" with last function mempool_resize in Krnl PSW and zfcp_erp_thread in the Call Trace. Don't evaluate channel values which are invalid on link down. The number of status read requests is always valid, evaluated, and set to a positive minimum greater than zero. The adapter open recovery can proceed and the channel has status read buffers to inform us on a future link up event. While we are not aware of any other code path that could result in mempool resize attempts of size zero, we still also initialize the number of status read buffers to be posted to a static minimum number on adapter object allocation. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> #2.6.35+ Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] zfcp: remove access control tables interfaceMartin Peschke2013-05-3110-636/+15
| | | | | | | | | | | | | | This patch removes an interface that was used to manage access control tables within the HBA. The patch consequently removes the handling for conditions related to those access control tables, too. That initiator-based access control feature was only needed until the introduction of NPIV and was withdrawn with z10 years ago. It's time to cleanup the corresponding device driver code. Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] zfcp: module parameter dbflevel for early debuggingSteffen Maier2013-05-311-2/+9
| | | | | | | | | | | | So far, we could only increase the s390dbf log level after an FCP device has been initially set online for it to create the dbf entries required to adjust the level. Introduce zfcp.dbflevel as counterpart to the already existing zfcp.dbfsize to enable debugging of e.g. setting an FCP device online. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] zfcp: block queue limits with data routerSteffen Maier2013-05-311-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 86a9668a8d29ea711613e1cb37efa68e7c4db564 "[SCSI] zfcp: support for hardware data router" reduced the initial block queue limits in the scsi_host_template to the absolute minimum and adjusted them later on. However, the adjustment was too late for the BSG devices of Scsi_Host and fc_host. Therefore, ioctl(..., SG_IO, ...) with request or response size > 4kB to a BSG device of an fc_host or a Scsi_Host fails with EINVAL. As a result, users of such ioctl such as HBA_SendCTPassThru() in libzfcphbaapi return with error HBA_STATUS_ERROR. Initialize the block queue limits in zfcp_scsi_host_template to the greatest common denominator (GCD). While we cannot exploit the slightly enlarged maximum request size with data router, this should be neglectible. Doing so also avoids running into trouble after live guest relocation (LGR) / migration from a data router FCP device to an FCP device that does not support data router. In that case, zfcp would figure out the new limits on adapter recovery, but the fc_host and Scsi_Host (plus in fact all sdevs) still exist with the old and now too large queue limits. It should also OK, not to use half the size as in the DIX case, because fc_host and Scsi_Host do not transport FCP requests including SCSI commands using protection data. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> #3.2+ Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] zfcp: fix adapter (re)open recovery while link to SAN is downDaniel Hansel2013-05-311-0/+4
| | | | | | | | | | | | | | | | | | | | | | FCP device remains in status ERP_FAILED when device is switched online or adapter recovery is triggered while link to SAN is down. When Exchange Configuration Data command returns the FSF status FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE it aborts the exchange process. The only retries are done during the common error recovery procedure (i.e. max. 3 retries with 8sec sleep between) and remains in status ERP_FAILED with QDIO down. This commit reverts the commit 0df138476c8306478d6e726f044868b4bccf411c (zfcp: Fix adapter activation on link down). When FSF status FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE is received the adapter recovery will be finished without any retries. QDIO will be up now and status changes such as LINK UP will be received now. Signed-off-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> #2.6.37+ Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] zfcp: remove unused device_unregister wrapperSebastian Ott2013-05-312-16/+0
| | | | | | | | | | | Remove the now unused function zfcp_device_unregister since all users have been converted to use device_unregister directly. Reviewed-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] zfcp: cleanup unit sysfs attribute usageSebastian Ott2013-05-314-11/+9
| | | | | | | | | | | | Let the driver core handle device attribute creation and removal. This will simplify the code and eliminates races between attribute availability and userspace notification via uevents. Reviewed-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] zfcp: cleanup port sysfs attribute usageSebastian Ott2013-05-315-15/+10
| | | | | | | | | | | | Let the driver core handle device attribute creation and removal. This will simplify the code and eliminates races between attribute availability and userspace notification via uevents. Reviewed-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] zfcp: cfdc fops add ownerSebastian Ott2013-05-311-0/+2
| | | | | | | | | Set the owner member of zfcp_cfdc_fops, to ensure that the caller of these functions holds a module reference. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* s390/time: rename tod clock access functionsHeiko Carstens2013-02-142-2/+2
| | | | | | | | Fix name clash with some common code device drivers and add "tod" to all tod clock access function names. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [SCSI] zfcp: only access zfcp_scsi_dev for valid scsi_deviceMartin Peschke2012-09-241-5/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | __scsi_remove_device (e.g. due to dev_loss_tmo) calls zfcp_scsi_slave_destroy which in turn sends a close LUN FSF request to the adapter. After 30 seconds without response, zfcp_erp_timeout_handler kicks the ERP thread failing the close LUN ERP action. zfcp_erp_wait in zfcp_erp_lun_shutdown_wait and thus zfcp_scsi_slave_destroy returns and then scsi_device is no longer valid. Sometime later the response to the close LUN FSF request may finally come in. However, commit b62a8d9b45b971a67a0f8413338c230e3117dff5 "[SCSI] zfcp: Use SCSI device data zfcp_scsi_dev instead of zfcp_unit" introduced a number of attempts to unconditionally access struct zfcp_scsi_dev through struct scsi_device causing a use-after-free. This leads to an Oops due to kernel page fault in one of: zfcp_fsf_abort_fcp_command_handler, zfcp_fsf_open_lun_handler, zfcp_fsf_close_lun_handler, zfcp_fsf_req_trace, zfcp_fsf_fcp_handler_common. Move dereferencing of zfcp private data zfcp_scsi_dev allocated in scsi_device via scsi_transport_reserve_device after the check for potentially aborted FSF request and thus no longer valid scsi_device. Only then assign sdev_to_zfcp(sdev) to the local auto variable struct zfcp_scsi_dev *zfcp_sdev. Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> #2.6.37+ Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] zfcp: No automatic port_rescan on eventsSteffen Maier2012-09-245-4/+32
| | | | | | | | | | | | | | | In FC fabrics with large zones, the automatic port_rescan on incoming ELS and any adapter recovery can cause quite some traffic at the very same time, especially if lots of Linux images share an HBA, which is common on s390. This can cause trouble and failures. Fix this by making such port rescans dependent on a user configurable module parameter. The following unconditional automatic port rescans remain as is: On setting an adapter online and on manual user-triggered writes to the sysfs attribute port_rescan. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] zfcp: restore refcount check on port_removeSteffen Maier2012-09-245-12/+45
| | | | | | | | | | | | | | | | | | | Upstream commit f3450c7b917201bb49d67032e9f60d5125675d6a "[SCSI] zfcp: Replace local reference counting with common kref" accidentally dropped a reference count check before tearing down zfcp_ports that are potentially in use by zfcp_units. Even remote ports in use can be removed causing unreachable garbage objects zfcp_ports with zfcp_units. Thus units won't come back even after a manual port_rescan. The kref of zfcp_port->dev.kobj is already used by the driver core. We cannot re-use it to track the number of zfcp_units. Re-introduce our own counter for units per port and check on port_remove. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: <stable@vger.kernel.org> #2.6.33+ Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] zfcp: remove invalid reference to list iterator variableJulia Lawall2012-09-241-1/+1
| | | | | | | | | | | | | | | | | | | | | If list_for_each_entry, etc complete a traversal of the list, the iterator variable ends up pointing to an address at an offset from the list head, and not a meaningful structure. Thus this value should not be used after the end of the iterator. Replace port->adapter->scsi_host by adapter->scsi_host. This problem was found using Coccinelle (http://coccinelle.lip6.fr/). Oversight in upsteam commit of v2.6.37 a1ca48319a9aa1c5b57ce142f538e76050bb8972 "[SCSI] zfcp: Move ACL/CFDC code to zfcp_cfdc.c" which merged the content of zfcp_erp_port_access_changed(). Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> #2.6.37+ Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] zfcp: Do not wakeup while suspendedSteffen Maier2012-09-245-10/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the mapping of FCP device bus ID and corresponding subchannel is modified while the Linux image is suspended, the resume of FCP devices can fail. During resume, zfcp gets callbacks from cio regarding the modified subchannels but they can be arbitrarily mixed with the restore/resume callback. Since the cio callbacks would trigger adapter recovery, zfcp could wakeup before the resume callback. Therefore, ignore the cio callbacks regarding subchannels while being suspended. We can safely do so, since zfcp does not deal itself with subchannels. For problem determination purposes, we still trace the ignored callback events. The following kernel messages could be seen on resume: kernel: <WWPN>: parent <FCP device bus ID> should not be sleeping As part of adapter reopen recovery, zfcp performs auto port scanning which can erroneously try to register new remote ports with scsi_transport_fc and the device core code complains about the parent (adapter) still sleeping. kernel: zfcp.3dff9c: <FCP device bus ID>:\ Setting up the QDIO connection to the FCP adapter failed <last kernel message repeated 3 more times> kernel: zfcp.574d43: <FCP device bus ID>:\ ERP cannot recover an error on the FCP device In such cases, the adapter gave up recovery and remained blocked along with its child objects: remote ports and LUNs/scsi devices. Even the adapter shutdown as part of giving up recovery failed because the ccw device state remained disconnected. Later, the corresponding remote ports ran into dev_loss_tmo. As a result, the LUNs were erroneously not available again after resume. Even a manually triggered adapter recovery (e.g. sysfs attribute failed, or device offline/online via sysfs) could not recover the adapter due to the remaining disconnected state of the corresponding ccw device. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> #2.6.32+ Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] zfcp: Bounds checking for deferred error traceSteffen Maier2012-09-242-7/+11
| | | | | | | | | | | | | | | | | | | The pl vector has scount elements, i.e. pl[scount-1] is the last valid element. For maximum sized requests, payload->counter == scount after the last loop iteration. Therefore, do bounds checking first (with boolean shortcut) to not access the invalid element pl[scount]. Do not trust the maximum sbale->scount value from the HBA but ensure we won't access the pl vector out of our allocated bounds. While at it, clean up scoping and prevent unnecessary memset. Minor fix for 86a9668a8d29ea711613e1cb37efa68e7c4db564 "[SCSI] zfcp: support for hardware data router" Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> #3.2+ Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] zfcp: Make trace record tags uniqueSteffen Maier2012-09-241-2/+2
| | | | | | | | | | | | | | | | Duplicate fssrh_2 from a54ca0f62f953898b05549391ac2a8a4dad6482b "[SCSI] zfcp: Redesign of the debug tracing for HBA records." complicates distinction of generic status read response from local link up. Duplicate fsscth1 from 2c55b750a884b86dea8b4cc5f15e1484cc47a25c "[SCSI] zfcp: Redesign of the debug tracing for SAN records." complicates distinction of good common transport response from invalid port handle. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> #2.6.38+ Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] zfcp: Adapt to new FC_PORTSPEED semanticsSteffen Maier2012-09-241-2/+32
| | | | | | | | | | | | | | | | | | | Commit a9277e7783651d4e0a849f7988340b1c1cf748a4 "[SCSI] scsi_transport_fc: Getting FC Port Speed in sync with FC-GS" changed the semantics of FC_PORTSPEED defines to FDMI port attributes of FC-HBA/SM-HBA which is different from the previous bit reversed Report Port Speed Capabilities (RPSC) ELS of FC-GS/FC-LS. Zfcp showed "10 Gbit" instead of "4 Gbit" for supported_speeds. It now uses explicit bit conversion as the other LLDs already do, in order to be independent of the kernel bit semantics. See also http://marc.info/?l=linux-scsi&m=134452926830730&w=2 Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> #3.4+ Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* s390/comments: unify copyright messages and remove file namesHeiko Carstens2012-07-2017-17/+17
| | | | | | | | | | | | | | Remove the file name from the comment at top of many files. In most cases the file name was wrong anyway, so it's rather pointless. Also unify the IBM copyright statement. We did have a lot of sightly different statements and wanted to change them one after another whenever a file gets touched. However that never happened. Instead people start to take the old/"wrong" statements to use as a template for new files. So unify all of them in one go. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
* compat: fix compile breakage on s390Heiko Carstens2012-02-271-0/+1
| | | | | | | | | | | The new is_compat_task() define for the !COMPAT case in include/linux/compat.h conflicts with a similar define in arch/s390/include/asm/compat.h. This is the minimal patch which fixes the build issues. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [SCSI] zfcp: return early from slave_destroy if slave_alloc returned earlySteffen Maier2011-12-141-0/+4
| | | | | | | | | | | | | | | | | | | zfcp_scsi_slave_destroy erroneously always tried to finish its task even if the corresponding previous zfcp_scsi_slave_alloc returned early. This can lead to kernel page faults on accessing uninitialized fields of struct zfcp_scsi_dev in zfcp_erp_lun_shutdown_wait. Take the port field of the struct to determine if slave_alloc returned early. This zfcp bug is exposed by 4e6c82b (in turn fixing f7c9c6b to be compatible with 21208ae) which can call slave_destroy for a corresponding previous slave_alloc that did not finish. This patch is based on James Bottomley's fix suggestion in http://www.spinics.net/lists/linux-scsi/msg55449.html. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Cc: <stable@kernel.org> #2.6.38+ Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* s390: add missing module.h/export.h includesHeiko Carstens2011-10-315-0/+5
| | | | | | | | | | | | | Fix several compile errors on s390 caused by splitting module.h. Some include additions [e.g. qdio_setup.c, zfcp_qdio.c] are in anticipation of pending changes queued for s390 that increase the modular use footprint. [PG: added additional obvious changes since Heiko's original patch] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* [SCSI] zfcp: support for hardware data routerSwen Schillig2011-08-277-60/+195
| | | | | | | | | | FICON Express8S supports hardware data router, which requires an adapted qdio request format. This part 2/2 exploits the functionality in zfcp. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] zfcp: non-experimental support for DIF/DIXSteffen Maier2011-08-272-5/+3
| | | | | | | | | DIF/DIX support for zfcp is no longer experimental, and config option is no longer necessary. Return error from queuecommand for unsupported data directions. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* atomic: use <linux/atomic.h>Arun Sharma2011-07-261-1/+1
| | | | | | | | | | | | | | This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [S390] qdio: Split SBAL entry flagsJan Glauber2011-06-063-31/+34
| | | | | | | | | | | | | The qdio SBAL entry flag is made-up of four different values that are independent of one another. Some of the bits are reserved by the hardware and should not be changed by qdio. Currently all four values are overwritten since the SBAL entry flag is defined as an u32. Split the SBAL entry flag into four u8's as defined by the hardware and don't touch the reserved bits. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* Fix common misspellingsLucas De Marchi2011-03-312-2/+2
| | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
* [S390] ccw_driver: remove duplicate membersSebastian Ott2011-03-231-2/+4
| | | | | | | | | Remove the owner and name members of struct ccw_driver and convert all drivers to store this data in the embedded struct device_driver. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [SCSI] zfcp: Add information to symbolic port name when running in NPIV modeChristof Schmitt2011-02-257-0/+169
| | | | | | | | | | | | Query the FC symbolic port name for reporting in the fc_host sysfs and enable the symbolic_name attribute in the fc_host sysfs. When running in NPIV mode, extend the symbolic port name with the devno and the hostname. This allows better identification of Linux systems for SAN and storage administrators. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
OpenPOWER on IntegriCloud