summaryrefslogtreecommitdiffstats
path: root/drivers/s390/char
Commit message (Collapse)AuthorAgeFilesLines
* s390/memory hotplug,sclp: get rid of per memory increment usecountHeiko Carstens2013-05-021-18/+2
| | | | | | | | | | Given that the memory block size is always larger or equal to the memory increment size there is no need for a usecount anymore. Each memory increment belongs to exactly one memory block. So get rid of the usecount. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* s390/mem_detect: limit memory detection loop to "mem=" parameterHeiko Carstens2013-05-021-2/+2
| | | | | | | | | | | | | | | | | The current memory detection loop will detect all present memory of a machine. This is true even if the user specified the "mem=" parameter on the kernel command line. This can be a problem since the memory detection may cause a fully populated host page table for the guest, even for those parts of the memory that the guest will never use afterwards. So fix this and only detect memory up to a user supplied "mem=" limit if specified. Reported-by: Michael Johanssen <johanssn@de.ibm.com> Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* s390/zcore: calculate real memory size using own get_mem_size functionHeiko Carstens2013-05-021-15/+15
| | | | | | | | | | | | | | The zcore device driver makes use of the global visible real_memory_size variable with its odd semantics. Since the zcore device driver already has code in place which calculates the memory size at module load time, use that code to calculate the current memory end value. One user less of the odd real_memory_size variable. Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* Merge tag 'tty-3.10-rc1' of ↵Linus Torvalds2013-04-292-14/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver update from Greg Kroah-Hartman: "Here's the big tty/serial driver merge request for 3.10-rc1 Once again, Jiri has a number of TTY driver fixes and cleanups, and Peter Hurley came through with a bunch of ldisc fixes that resolve a number of reported issues. There are some other serial driver cleanups as well. All of these have been in the linux-next tree for a while" * tag 'tty-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (117 commits) tty/serial/sirf: fix MODULE_DEVICE_TABLE serial: mxs: drop superfluous {get|put}_device serial: mxs: fix buffer overflow ARM: PL011: add support for extended FIFO-size of PL011-r1p5 serial_core.c: add put_device() after device_find_child() tty: Fix unsafe bit ops in tty_throttle_safe/unthrottle_safe serial: sccnxp: Replace pdata.init/exit with regulator API serial: sccnxp: Do not override device name TTY: pty, fix compilation warning TTY: rocket, fix compilation warning TTY: ircomm: fix DTR being raised on hang up TTY: synclinkmp: fix DTR being raised on hang up TTY: synclink_gt: fix DTR being raised on hang up TTY: synclink: fix DTR being raised on hang up serial: 8250_dw: Fix the stub for dw8250_probe_acpi() serial: 8250_dw: Convert to devm_ioremap() serial: 8250_dw: Set port capabilities based on CPR register serial: 8250_dw: Let ACPI code extract the DMA client info serial: 8250_dw: Support clk framework also with ACPI serial: 8250_dw: Enable runtime PM ...
| * Merge 3.9-rc7 intp tty-nextGreg Kroah-Hartman2013-04-141-7/+9
| |\ | | | | | | | | | | | | | | | We want the fixes here. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * \ Merge 3.9-rc5 into tty-nextGreg Kroah-Hartman2013-04-011-0/+2
| |\ \ | | | | | | | | | | | | | | | | | | | | We need the fixes here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | TTY: add tty_port_tty_wakeup helperJiri Slaby2013-03-182-14/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It allows for cleaning up on a considerable amount of places. They did port_get, wakeup, kref_put. Now the only thing needed is to call tty_port_tty_wakeup which does exactly that. One exception is ifx6x60 where tty_wakeup was open-coded. We now call tty_wakeup properly there. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | s390/memory hotplug: prevent offline of active memory incrementsHeiko Carstens2013-04-261-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case a machine supports memory hotplug all active memory increments present at IPL time have been initialized with a "usecount" of 1. This is wrong if the memory increment size is larger than the memory section size of the memory hotplug code. If that is the case the usecount must be initialized with the number of memory sections that fit into one memory increment. Otherwise it is possible to put a memory increment into standby state even if there are still active sections. Afterwards addressing exceptions might happen which cause the kernel to panic. However even worse, if a memory increment was put into standby state and afterwards into active state again, it's contents would have been zeroed, leading to memory corruption. This was only an issue for machines that support standby memory and have at least 256GB memory. This is broken since commit fdb1bb15 "[S390] sclp/memory hotplug: fix initial usecount of increments". Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: stable@vger.kernel.org # 2.6.39+ Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | | | s390/zcore: Fix HSA copy length for last blockMichael Holzheu2013-04-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently always one page is copied to a user buffer for the last HSA block in memcpy_hsa(). Now the correct length is used. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | | | s390/cio: ccw_device_force_console don't use static variableSebastian Ott2013-04-172-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | force_console is used to wake up the CCW based console device to print a panic message in case something goes wrong in a suspend or resume cycle. Stop using the static console_subchannel and add a parameter to this function to specify which ccw device we have to wake up. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | | | s390/cio: wait_cons_dev don't use static variableSebastian Ott2013-04-172-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | wait_cons_dev is used to busy wait for an interrupt on the console ccw device. Stop using the static console_subchannel and add a parameter to this function to specify on which ccw device/subchannel we have to do the polling. While at it rename the function to ccw_device_wait_idle and move it to device.c Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | | | s390/monreader: Remove redundant NULL check before kfreeSyam Sidhardhan2013-04-171-2/+1
| |_|/ |/| | | | | | | | | | | | | | | | | | | | kfree on NULL pointer is a no-op. Signed-off-by: Syam Sidhardhan <s.syam@samsung.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | | s390/3270: fix minor_start issueMartin Schwidefsky2013-03-211-7/+9
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | The 3270 device nodes 227/0 and 228/0 are special. 227/0 is never used, and 228/0 is used to redirect full screen applications from /dev/3270/tub to the real device node of the 3270 terminal. To keep the device names /dev/3270/tty<x> consistent with the minor number the device driver sets minor_start to 0 and skips minor 0. That makes the tty index equivalent to the minor number. But doing so seems to causes problems with init scripts. A better solution is to set minor_start to the correct value of 1 and set name_base to 1 as well. tty_register_device will then automatically create the correct tty name. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | s390/kdump: Do not add standby memory for kdumpMichael Holzheu2013-03-111-0/+2
|/ | | | | | | | | | Standby memory that is located outside [0,OLDMEM_SIZE] is currently used by the s390 memory detection. This leads to additional memory consumption due to allocation of page structures. To fix this, we now do not add standby memory if the kernel is started in kdump mode. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* Merge branch 'for-linus' of ↵Linus Torvalds2013-02-263-7/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs pile (part one) from Al Viro: "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent locking violations, etc. The most visible changes here are death of FS_REVAL_DOT (replaced with "has ->d_weak_revalidate()") and a new helper getting from struct file to inode. Some bits of preparation to xattr method interface changes. Misc patches by various people sent this cycle *and* ocfs2 fixes from several cycles ago that should've been upstream right then. PS: the next vfs pile will be xattr stuff." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) saner proc_get_inode() calling conventions proc: avoid extra pde_put() in proc_fill_super() fs: change return values from -EACCES to -EPERM fs/exec.c: make bprm_mm_init() static ocfs2/dlm: use GFP_ATOMIC inside a spin_lock ocfs2: fix possible use-after-free with AIO ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero target: writev() on single-element vector is pointless export kernel_write(), convert open-coded instances fs: encode_fh: return FILEID_INVALID if invalid fid_type kill f_vfsmnt vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op nfsd: handle vfs_getattr errors in acl protocol switch vfs_getattr() to struct path default SET_PERSONALITY() in linux/elf.h ceph: prepopulate inodes only when request is aborted d_hash_and_lookup(): export, switch open-coded instances 9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate() 9p: split dropping the acls from v9fs_set_create_acl() ...
| * new helper: file_inode(file)Al Viro2013-02-223-7/+7
| | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | Merge branch 'for-linus' of ↵Linus Torvalds2013-02-217-416/+501
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 update from Martin Schwidefsky: "The most prominent change in this patch set is the software dirty bit patch for s390. It removes __HAVE_ARCH_PAGE_TEST_AND_CLEAR_DIRTY and the page_test_and_clear_dirty primitive which makes the common memory management code a bit less obscure. Heiko fixed most of the PCI related fallout, more often than not missing GENERIC_HARDIRQS dependencies. Notable is one of the 3270 patches which adds an export to tty_io to be able to resize a tty. The rest is the usual bunch of cleanups and bug fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (42 commits) s390/module: Add missing R_390_NONE relocation type drivers/gpio: add missing GENERIC_HARDIRQ dependency drivers/input: add couple of missing GENERIC_HARDIRQS dependencies s390/cleanup: rename SPP to LPP s390/mm: implement software dirty bits s390/mm: Fix crst upgrade of mmap with MAP_FIXED s390/linker skript: discard exit.data at runtime drivers/media: add missing GENERIC_HARDIRQS dependency s390/bpf,jit: add vlan tag support drivers/net,AT91RM9200: add missing GENERIC_HARDIRQS dependency iucv: fix kernel panic at reboot s390/Kconfig: sort list of arch selected config options phylib: remove !S390 dependeny from Kconfig uio: remove !S390 dependency from Kconfig dasd: fix sysfs cleanup in dasd_generic_remove s390/pci: fix hotplug module init s390/pci: cleanup clp page allocation s390/pci: cleanup clp inline assembly s390/perf: cpum_cf: fallback to software sampling events s390/mm: provide PAGE_SHARED define ...
| * | s390/mm: implement software dirty bitsMartin Schwidefsky2013-02-141-8/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The s390 architecture is unique in respect to dirty page detection, it uses the change bit in the per-page storage key to track page modifications. All other architectures track dirty bits by means of page table entries. This property of s390 has caused numerous problems in the past, e.g. see git commit ef5d437f71afdf4a "mm: fix XFS oops due to dirty pages without buffers on s390". To avoid future issues in regard to per-page dirty bits convert s390 to a fault based software dirty bit detection mechanism. All user page table entries which are marked as clean will be hardware read-only, even if the pte is supposed to be writable. A write by the user process will trigger a protection fault which will cause the user pte to be marked as dirty and the hardware read-only bit is removed. With this change the dirty bit in the storage key is irrelevant for Linux as a host, but the storage key is still required for KVM guests. The effect is that page_test_and_clear_dirty and the related code can be removed. The referenced bit in the storage key is still used by the page_test_and_clear_young primitive to provide page age information. For page cache pages of mappings with mapping_cap_account_dirty there will not be any change in behavior as the dirty bit tracking already uses read-only ptes to control the amount of dirty pages. Only for swap cache pages and pages of mappings without mapping_cap_account_dirty there can be additional protection faults. To avoid an excessive number of additional faults the mk_pte primitive checks for PageDirty if the pgprot value allows for writes and pre-dirties the pte. That avoids all additional faults for tmpfs and shmem pages until these pages are added to the swap cache. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | s390/time: rename tod clock access functionsHeiko Carstens2013-02-142-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | Fix name clash with some common code device drivers and add "tod" to all tod clock access function names. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | s390/zcore: Add hsa fileMichael Holzheu2013-02-141-3/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Under LPAR the zfcpdump HSA is a shared resource. Up to now the HSA memory is released when the zcore file is closed. Dump programs that know that they do not need the HSA memory any more (e.g. because they already dumped it) could release it earlier. This would allow other LPARs to use it again. To achieve this a new debugfs file "hsa" is added that can be used to read the HSA size and to release the HSA by writing "0" into the file. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | s390/3270: asynchronous size sensingMartin Schwidefsky2013-02-143-314/+331
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert the synchronous size sense code to an interrupt driven approach. This allows to set the device online even if the terminal is not connected. With the new code views can be registered without a connected terminal, the tty can be opened as soon as the device is online. After the terminal has been connected and the size has been determined the tty is resized to match the device characteristics.. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | s390/3270: introduce device notifierMartin Schwidefsky2013-02-144-82/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a notifier to create / destroy the device nodes for the tty view and the fullscreen view. Only device nodes for online devices are created and the device names will follow the convention as outlined in Documentation/devices.txt: 3270/tty<x> for the tty nodes, 3270/tub<x> for hte fullscreen nodes and 3270/tub for the fullscreen control node. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | s390/3270: fix initialization order in tty3270_alloc_viewMartin Schwidefsky2013-02-141-6/+8
| | | | | | | | | | | | | | | | | | | | | | | | Corrects the order of tasklet_init vs. the allocation of the read request which has been broken by git commit 9d2ae233 "TTY: tty3270, move initialization to allocation". Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | s390/3270: readd tty3270_openMartin Schwidefsky2013-02-141-0/+15
| |/ | | | | | | | | | | | | | | | | Reintroduce the tty3270_open function which has been removed by git commit 20cda6f2 "TTY: tty3270, add tty install". Without the open function in the tty_operations tty_open will return -ENODEV and the 3270 tty will not work. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | Merge 3.8-rc5 into tty-nextGreg Kroah-Hartman2013-01-256-8/+12
|\ \ | |/ | | | | | | | | This resolves a number of tty driver merge issues found in linux-next Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * s390/3215: partially revert tty close handling fixHeiko Carstens2013-01-081-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Partially revert ae289dc1f "s390/3215: fix tty close handling", since this leads sometimes to hanging agetty processes and therefore systems that get stuck while starting. This was magically fixed (bisected) by a common code patch from Alan Cox: 36b3c070 "tty: Move the handling of the tty release logic", however it was unrelated. Since the removed code worked for a decade, nobody knows anymore why it was in there in the first place and debugging the observed hang is non-trivial (at least for me :) ), let's just re-add the removed code before we see other side effects. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
| * s390/irq: remove split irq fields from /proc/statHeiko Carstens2013-01-086-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that irq sum accounting for /proc/stat's "intr" line works again we have the oddity that the sum field (first field) contains only the sum of the second (external irqs) and third field (I/O interrupts). The reason for that is that these two fields are already sums of all other fields. So if we would sum up everything we would count every interrupt twice. This is broken since the split interrupt accounting was merged two years ago: 052ff461c8427629aee887ccc27478fc7373237c "[S390] irq: have detailed statistics for interrupt types". To fix this remove the split interrupt fields from /proc/stat's "intr" line again and only have them in /proc/interrupts. This restores the old behaviour, seems to be the only sane fix and mimics a behaviour from other architectures where /proc/interrupts also contains more than /proc/stat's "intr" line does. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | tty: Added a CONFIG_TTY option to allow removal of TTYJoe Millenbach2013-01-181-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The option allows you to remove TTY and compile without errors. This saves space on systems that won't support TTY interfaces anyway. bloat-o-meter output is below. The bulk of this patch consists of Kconfig changes adding "depends on TTY" to various serial devices and similar drivers that require the TTY layer. Ideally, these dependencies would occur on a common intermediate symbol such as SERIO, but most drivers "select SERIO" rather than "depends on SERIO", and "select" does not respect dependencies. bloat-o-meter output comparing our previous minimal to new minimal by removing TTY. The list is filtered to not show removed entries with awk '$3 != "-"' as the list was very long. add/remove: 0/226 grow/shrink: 2/14 up/down: 6/-35356 (-35350) function old new delta chr_dev_init 166 170 +4 allow_signal 80 82 +2 static.__warned 143 142 -1 disallow_signal 63 62 -1 __set_special_pids 95 94 -1 unregister_console 126 121 -5 start_kernel 546 541 -5 register_console 593 588 -5 copy_from_user 45 40 -5 sys_setsid 128 120 -8 sys_vhangup 32 19 -13 do_exit 1543 1526 -17 bitmap_zero 60 40 -20 arch_local_irq_save 137 117 -20 release_task 674 652 -22 static.spin_unlock_irqrestore 308 260 -48 Signed-off-by: Joe Millenbach <jmillenbach@gmail.com> Reviewed-by: Jamey Sharp <jamey@minilop.net> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | TTY: switch tty_schedule_flipJiri Slaby2013-01-151-10/+2
| | | | | | | | | | | | | | | | | | | | | | | | Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. This is the last one: tty_schedule_flip Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | TTY: switch tty_flip_buffer_pushJiri Slaby2013-01-153-11/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. Now, the one where most of tty_port_tty_get gets removed: tty_flip_buffer_push. IOW we also closed all the races in drivers not using tty_port_tty_get at all yet. Also we move tty_flip_buffer_push declaration from include/linux/tty.h to include/linux/tty_flip.h to all others while we are changing it anyway. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | TTY: move low_latency to tty_portJiri Slaby2013-01-154-5/+5
| | | | | | | | | | | | | | | | | | | | One point is to have less places where we actually need tty pointer. The other is that low_latency is bound to buffer processing and buffers are now in tty_port. So it makes sense to move low_latency to tty_port too. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | TTY: switch tty_insert_flip_stringJiri Slaby2013-01-153-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. tty_insert_flip_string this time. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | TTY: switch tty_insert_flip_charJiri Slaby2013-01-153-5/+6
|/ | | | | | | | | | | | | Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. tty_insert_flip_char is the next one to proceed. This one is used all over the code, so the patch is huge. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge branch 'for-linus' of ↵Linus Torvalds2012-12-132-11/+73
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 update from Martin Schwidefsky: "Add support to generate code for the latest machine zEC12, MOD and XOR instruction support for the BPF jit compiler, the dasd safe offline feature and the big one: the s390 architecture gets PCI support!! Right before the world ends on the 21st ;-)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (41 commits) s390/qdio: rename the misleading PCI flag of qdio devices s390/pci: remove obsolete email addresses s390/pci: speed up __iowrite64_copy by using pci store block insn s390/pci: enable NEED_DMA_MAP_STATE s390/pci: no msleep in potential IRQ context s390/pci: fix potential NULL pointer dereference in dma_free_seg_table() s390/pci: use kmem_cache_zalloc instead of kmem_cache_alloc/memset s390/bpf,jit: add support for XOR instruction s390/bpf,jit: add support MOD instruction s390/cio: fix pgid reserved check vga: compile fix, disable vga for s390 s390/pci: add PCI Kconfig options s390/pci: s390 specific PCI sysfs attributes s390/pci: PCI hotplug support via SCLP s390/pci: CHSC PCI support for error and availability events s390/pci: DMA support s390/pci: PCI adapter interrupts for MSI/MSI-X s390/bitops: find leftmost bit instruction support s390/pci: CLP interface s390/pci: base support ...
| * s390/pci: PCI hotplug support via SCLPJan Glauber2012-11-302-2/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | Add SCLP PCI configure/deconfigure and implement a PCI hotplug controller (s390_pci_hpc). The hotplug controller creates a slot for every PCI function in stand-by or configured state. The PCI functions are named after the PCI function ID (fid). By writing to the power attribute in /sys/bus/pci/slots/<fid>/power the PCI function is moved to stand-by or configured state. If moved to the configured state the device is automatically scanned by the s390 PCI layer. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * s390/memory hotplug: use pfmf instruction to initialize storage keysHeiko Carstens2012-11-231-9/+8
| | | | | | | | | | | | | | | | | | Move and rename init_storage_keys() to pageattr.c, so it can also be used from the sclp memory hotplug code in order to initialize storage keys. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | Merge 3.7-rc6 into tty-nextGreg Kroah-Hartman2012-11-161-7/+5
|\ \ | |/
| * s390/3215: fix tty close handlingHeiko Carstens2012-11-151-7/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 3215 console always has the RAW3215_FIXED flag set, which causes raw3215_shutdown() not to wait for outstanding I/O requests if an attached tty gets closed. The flag however can be simply removed, so we can guarantee that all requests belonging to the tty have been processed when the tty is closed. However the tasklet that belongs to the 3215 device may be scheduled even if there is no tty attached anymore, since we have a race between console and tty processing. Thefore unconditional tty_wakekup() in raw3215_wakeup() can cause the following NULL pointer dereference: 3.465368 Unable to handle kernel pointer dereference at virtual kernel address (null) 3.465448 Oops: 0004 #1 SMP 3.465454 Modules linked in: 3.465459 CPU: 1 Not tainted 3.6.0 #1 3.465462 Process swapper/1 (pid: 0, task: 000000003ffa4428, ksp: 000000003ffb7ce0) 3.465466 Krnl PSW : 0404100180000000 0000000000162f86 (__wake_up+0x46/0xb8) 3.465480 R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:0 CC:1 PM:0 EA:3 Krnl GPRS: fffffffffffffffe 0000000000000000 0000000000000160 0000000000000001 3.465492 0000000000000001 0000000000000004 0000000000000004 000000000096b490 3.465499 0000000000000001 0000000000000100 0000000000000001 0000000000000001 3.465506 070000003fc87d60 0000000000000160 000000003fc87d68 000000003fc87d00 3.465526 Krnl Code: 0000000000162f76: e3c0f0a80004 lg %r12,168(%r15) 0000000000162f7c: 58000370 l %r0,880 #0000000000162f80: c007ffffffff00 xilf %r0,4294967295 >0000000000162f86: ba102000 cs %r1,%r0,0(%r2) 0000000000162f8a: 1211 ltr %r1,%r1 0000000000162f8c: a774002f brc 7,162fea 0000000000162f90: b904002d lgr %r2,%r13 0000000000162f94: b904003a lgr %r3,%r10 3.465597 Call Trace: 3.465599 (<0400000000000000> 0x400000000000000) 3.465602 <000000000048c77e> raw3215_wakeup+0x2e/0x40 3.465607 <0000000000134d66> tasklet_action+0x96/0x168 3.465612 <000000000013423c> __do_softirq+0xd8/0x21c 3.465615 <0000000000134678> irq_exit+0xa8/0xac 3.465617 <000000000046c232> do_IRQ+0x182/0x248 3.465621 <00000000005c8296> io_return+0x0/0x8 3.465625 <00000000005c7cac> vtime_stop_cpu+0x4c/0xb8 3.465629 (<0000000000194e06> tick_nohz_idle_enter+0x4e/0x74) 3.465633 <0000000000104760> cpu_idle+0x170/0x184 3.465636 <00000000005b5182> smp_start_secondary+0xd6/0xe0 3.465641 <00000000005c86be> restart_int_handler+0x56/0x6c 3.465643 <0000000000000000> 0x0 3.465645 Last Breaking-Event-Address: 3.465647 <0000000000403136> tty_wakeup+0x46/0x98 3.465652 3.465654 Kernel panic - not syncing: Fatal exception in interrupt 01: HCPGIR450W CP entered; disabled wait PSW 00020001 80000000 00000000 0010F63C The easiest solution is simply to check if tty is NULL in the tasklet. If it is NULL nothing is to do (no tty attached), otherwise tty_wakeup() can be called, since we hold a reference to the tty. This is not nice... but it is a small patch and it works. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | TTY: call tty_port_destroy in the rest of driversJiri Slaby2012-11-154-1/+8
|/ | | | | | | | | | | | | | | | After commit "TTY: move tty buffers to tty_port", the tty buffers are not freed in some drivers. This is because tty_port_destructor is not called whenever a tty_port is freed. This was an assumption I counted with but was unfortunately untrue. So fix the drivers to fulfil this assumption. To be sure, the TTY buffers (and later some stuff) are gone along with the tty_port, we have to call tty_port_destroy at tear-down places. This is mostly where the structure containing a tty_port is freed. This patch does exactly that -- put tty_port_destroy at those places. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds2012-10-014-16/+48
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull TTY changes from Greg Kroah-Hartman: "As we skipped the merge window for 3.6-rc1 for the tty tree, everything is now settled down and working properly, so we are ready for 3.7-rc1. Here's the patchset, it's big, but the large changes are removing a firmware file and adding a staging tty driver (it depended on the tty core changes, so it's going through this tree instead of the staging tree.) All of these patches have been in the linux-next tree for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fix up more-or-less trivial conflicts in - drivers/char/pcmcia/synclink_cs.c: tty NULL dereference fix vs tty_port_cts_enabled() helper function - drivers/staging/{Kconfig,Makefile}: add-add conflict (dgrp driver added close to other staging drivers) - drivers/staging/ipack/devices/ipoctal.c: "split ipoctal_channel from iopctal" vs "TTY: use tty_port_register_device" * tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (235 commits) tty/serial: Add kgdb_nmi driver tty/serial/amba-pl011: Quiesce interrupts in poll_get_char tty/serial/amba-pl011: Implement poll_init callback tty/serial/core: Introduce poll_init callback kdb: Turn KGDB_KDB=n stubs into static inlines kdb: Implement disable_nmi command kernel/debug: Mask KGDB NMI upon entry serial: pl011: handle corruption at high clock speeds serial: sccnxp: Make 'default' choice in switch last serial: sccnxp: Remove mask termios caps for SW flow control serial: sccnxp: Report actual baudrate back to core serial: samsung: Add poll_get_char & poll_put_char Powerpc 8xx CPM_UART setting MAXIDL register proportionaly to baud rate Powerpc 8xx CPM_UART maxidl should not depend on fifo size Powerpc 8xx CPM_UART too many interrupts Powerpc 8xx CPM_UART desynchronisation serial: set correct baud_base for EXSYS EX-41092 Dual 16950 serial: omap: fix the reciever line error case 8250: blacklist Winbond CIR port 8250_pnp: do pnp probe before legacy probe ...
| * Merge 3.6-rc3 into tty-nextGreg Kroah-Hartman2012-08-271-0/+2
| |\ | | | | | | | | | | | | | | | This picks up all of the different fixes in Linus's tree that we also need here. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | TTY: tty3270, add tty installJiri Slaby2012-08-131-9/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This has two outcomes: * we give the TTY layer a tty_port * we do not find the info structure every time open is called on that tty In this case ->install is the only thing we want to do. We do not need ->open at all. See the tty->count > 1 check. And since we take a reference in ->install, we need also ->cleanup to drop the reference to a view. Final note, see that we leave raw3270_find_view in place. It is because views are removed even from module_exit. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: linux-s390@vger.kernel.org Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | TTY: con3215, add tty installJiri Slaby2012-08-131-6/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This has two outcomes: * we give the TTY layer a tty_port * we do not find the info structure every time open is called on that tty Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: linux-s390@vger.kernel.org Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | TTY: con3215, unset raw3215[line]Jiri Slaby2012-08-131-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | raw3215[line] is set in probe, but not unset in remove. This will lead to random crashes if the device is removed and the corresponding tty opened later. open would dereference freed memory. So set raw3215[line] to NULL in remove to fix that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: linux-s390@vger.kernel.org Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | TTY: use tty_port_link_deviceJiri Slaby2012-08-132-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So now for those drivers that can use neither tty_port_install nor tty_port_register_driver but still have tty_port available before tty_register_driver we use newly added tty_port_link_device. The rest of the drivers that still do not provide tty_struct <-> tty_port link will have to be converted to implement tty->ops->install. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | TTY: automatically create nodes for some driversJiri Slaby2012-08-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This looks like it was a mistake not to create device nodes for these drivers. Let us create them from now on. It will be necessary to call tty_register_device some way, either by tty_register_driver implicitly or to call tty_register_device proper. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: netdev@vger.kernel.org Cc: linux390@de.ibm.com Cc: linux-s390@vger.kernel.org Cc: linux-cris-kernel@axis.com Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | TTY: tty3270, free tty driver properlyJiri Slaby2012-08-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On module unload, in tty3270_exit, we forgot to free the tty driver. Add there a call to put_tty_driver. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: linux-s390@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | drivers/s390/char/monreader.c: fix error return codePeter Senna Tschudin2012-09-261-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | | s390/tape: remove even more tape block leftoversHeiko Carstens2012-09-262-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix this compile error: In file included from drivers/s390/char/tape_core.c:29:0: drivers/s390/char/tape_std.h:103:66: warning: ‘struct request’ declared inside parameter list [enabled by default] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | | s390/vmlogrdr: change return value from -ENOSYS to -EOPNOTSUPPHeiko Carstens2012-09-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Changing the return value of vmlogrdr_open() to -EOPNOTSUPP if O_NONBLOCK is specified shouldn't have any negative side effects. Any existing user wouldn't specify that flag since it wouldn't work anyway. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
OpenPOWER on IntegriCloud