summaryrefslogtreecommitdiffstats
path: root/drivers/rtc
Commit message (Collapse)AuthorAgeFilesLines
* drivers/rtc/rtc-imxdi.c: add missing spin lock initializationJan Luebbe2012-10-251-0/+2
| | | | | | | | | | | | | Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Roland Stigge <stigge@antcom.de> Cc: Grant Likely <grant.likely@secretlab.ca> Tested-by: Roland Stigge <stigge@antcom.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: kconfig: fix RTC_INTF defaults connected to RTC_CLASSKevin Hilman2012-10-111-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 6b8029fab641 ("rtc: kconfig: remove unnecessary dependencies") removed various 'depends on RTC_CLASS' dependencies but also removed a few 'default RTC_CLASS' statements, which actually changed default behavior. This resulted in the various RTC interfaces (sysfs, proc, dev) all being disabled by default, even when RTC_CLASS is enabled: # CONFIG_RTC_INTF_SYSFS is not set # CONFIG_RTC_INTF_PROC is not set # CONFIG_RTC_INTF_DEV is not set which is different from previous behavior (all of these where enabled.) To fix, add back the 'default RTC_CLASS' statments to each of the RTC_INTF_* options. I noticed this because some RTC tests started failing on my TI OMAP platforms because /dev/rtc0 was not present anymore, even though the driver was present and RTC_CLASS was enabled. Signed-off-by: Kevin Hilman <khilman@ti.com> Acked-by: Venu Byravarasu <vbyravarasu@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds2012-10-0625-256/+1982
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge misc patches from Andrew Morton: "The MM tree is rather stuck while I wait to find out what the heck is happening with sched/numa. Probably I'll need to route around all the code which was added to -next, sigh. So this is "everything else", or at least most of it - other small bits are still awaiting resolutions of various kinds." * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (180 commits) lib/decompress.c add __init to decompress_method and data kernel/resource.c: fix stack overflow in __reserve_region_with_split() omfs: convert to use beXX_add_cpu() taskstats: cgroupstats_user_cmd() may leak on error aoe: update aoe-internal version number to 50 aoe: update documentation to better reflect aoe-plus-udev usage aoe: remove unused code aoe: make dynamic block minor numbers the default aoe: update and specify AoE address guards and error messages aoe: retain static block device numbers for backwards compatibility aoe: support more AoE addresses with dynamic block device minor numbers aoe: update documentation with new URL and VM settings reference aoe: update copyright year in touched files aoe: update internal version number to 49 aoe: remove unused code and add cosmetic improvements aoe: increase net_device reference count while using it aoe: associate frames with the AoE storage target aoe: disallow unsupported AoE minor addresses aoe: do revalidation steps in order aoe: failover remote interface based on aoe_deadsecs parameter ...
| * drivers/rtc/rtc-s35390a.c: add wakealarm support for rtc-s35390A rtc chipMichael Langer2012-10-061-0/+116
| | | | | | | | | | | | | | | | | | Add basic get/set alarm support for the Seiko Instruments S-35390A. The chip is used on the QNAP TS-219P+ NAS device. Signed-off-by: Michael Langer <michael.brainbug.langer@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * drivers/rtc/rtc-m41t80.c: remove disabled alarm functionalityPaul Bolle2012-10-061-153/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit c3b79770e51a ("rtc: m41t80: Workaround broken alarm functionality") disabled m41t80's alarm functions. But since those functions were not touched, building this driver triggers these GCC warnings: drivers/rtc/rtc-m41t80.c:216:12: warning: 'm41t80_rtc_alarm_irq_enable' defined but not used [-Wunused-function] drivers/rtc/rtc-m41t80.c:238:12: warning: 'm41t80_rtc_set_alarm' defined but not used [-Wunused-function] drivers/rtc/rtc-m41t80.c:308:12: warning: 'm41t80_rtc_read_alarm' defined but not used [-Wunused-function] Remove these functions (and the commented out references to them) to silence these warnings. Anyone wanting to fix the alarm irq functionality can easily find the removed code in the git log of this file or through some web searches. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * drivers/rtc/rtc-tps65910.c: use platform_get_irq() to get RTC irq detailsVenu Byravarasu2012-10-061-4/+1
| | | | | | | | | | | | | | | | | | | | As RTC driver needs only irq number from platform data, using platform_get_irq(), instead of generic dev_get_platdata(). Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * rtc: kconfig: fix up dependency for ab8500Ulf Hansson2012-10-061-0/+1
| | | | | | | | | | | | | | Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * drivers/rtc/rtc-em3027.c: convert struct i2c_msg initialization to C99 formatShubhrajyoti D2012-10-061-3/+14
| | | | | | | | | | | | | | | | | | | | | | | | Convert the struct i2c_msg initialization to C99 format. This makes maintaining and editing the code simpler. Also helps once other fields like transferred are added in future. Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * drivers/rtc/rtc-isl1208.c: convert struct i2c_msg initialization to C99 formatShubhrajyoti D2012-10-061-4/+16
| | | | | | | | | | | | | | | | | | | | | | | | Convert the struct i2c_msg initialization to C99 format. This makes maintaining and editing the code simpler. Also helps once other fields like transferred are added in future. Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * drivers/rtc/rtc-pcf8563.c: convert struct i2c_msg initialization to C99 formatShubhrajyoti D2012-10-061-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | Convert the struct i2c_msg initialization to C99 format. This makes maintaining and editing the code simpler. Also helps once other fields like transferred are added in future. Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * drivers/rtc/rtc-rs5c372.c: convert struct i2c_msg initialization to C99 formatShubhrajyoti D2012-10-061-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | Convert the struct i2c_msg initialization to C99 format. This makes maintaining and editing the code simpler. Also helps once other fields like transferred are added in future. while at it also fix a checkpatch warn WARNING: sizeof rs5c->buf should be sizeof(rs5c->buf) Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * drivers/rtc/rtc-s35390a.c: convert struct i2c_msg initialization to C99 formatShubhrajyoti D2012-10-061-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | Convert the struct i2c_msg initialization to C99 format. This makes maintaining and editing the code simpler. Also helps once other fields like transferred are added in future. Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * drivers/rtc/rtc-x1205.c: convert struct i2c_msg initialization to C99 formatShubhrajyoti D2012-10-061-14/+78
| | | | | | | | | | | | | | | | | | | | | | | | Convert the struct i2c_msg initialization to C99 format. This makes maintaining and editing the code simpler. Also helps once other fields like transferred are added in future. Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * drivers/rtc/rtc-ds1672.c: convert struct i2c_msg initialization to C99 formatShubhrajyoti D2012-10-061-4/+22
| | | | | | | | | | | | | | | | | | | | | | | | Convert the struct i2c_msg initialization to C99 format. This makes maintaining and editing the code simpler. Also helps once other fields like transferred are added in future. Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * drivers/rtc/rtc-s3c.c: fix return value in s3c_rtc_probe()Sachin Kamat2012-10-061-2/+2
| | | | | | | | | | | | | | | | | | Return the value returned by platform_get_irq() instead of -ENOENT; Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * rtc_sysfs_show_hctosys(): display 0 if resume failedDavid Fries2012-10-063-4/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without this patch /sys/class/rtc/$CONFIG_RTC_HCTOSYS_DEVICE/hctosys contains a 1 (meaning "This rtc was used to initialize the system clock") even if setting the time by do_settimeofday() at bootup failed. The RTC can also be used to set the clock on resume, if it did 1, otherwise 0. Previously there was no indication if the RTC was used to set the clock in resume. This uses only CONFIG_RTC_HCTOSYS_DEVICE for conditional compilation instead of it and CONFIG_RTC_HCTOSYS to be more consistent. rtc_hctosys_ret was moved to class.c so class.c no longer depends on hctosys.c. [sfr@canb.auug.org.au: fix build] Signed-off-by: David Fries <David@Fries.net> Cc: Matthew Garrett <mjg@redhat.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * rtc: rtc-mxc: convert to module_platform_driverFabio Estevam2012-10-061-15/+5
| | | | | | | | | | | | | | | | | | | | Converting to module_platform_driver can make the code smaller and cleaner. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * rtc: rtc-mxc: adapt to the new i.mx clock frameworkFabio Estevam2012-10-061-6/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | i.mx drivers should use clk_prepare_enable/clk_disable_unprepare() in order to avoid clk warnings. While at it, convert to devm_clk_get() since other devm_ functions are used in this driver and it can also save some clk_put() calls. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * drivers/rtc/rtc-coh901331.c: use clk_prepare_enable() and ↵Julia Lawall2012-10-061-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | clk_disable_unprepare() clk_prepare_enable and clk_disable_unprepare combine clk_prepare and clk_enable, and clk_disable and clk_unprepare. They make the code more concise, and ensure that clk_unprepare is called when clk_enable fails. A simplified version of the semantic patch that introduces calls to these functions is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e; @@ - clk_prepare(e); - clk_enable(e); + clk_prepare_enable(e); @@ expression e; @@ - clk_disable(e); - clk_unprepare(e); + clk_disable_unprepare(e); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * rtc: rc5t583: add ricoh rc5t583 RTC driverVenu Byravarasu2012-10-063-0/+342
| | | | | | | | | | | | | | | | | | | | | | | | Add an RTC driver for the RTC device on Ricoh MFD Rc5t583. Ricoh RTC has 3 types of alarms. The current patch adds support for the Y-Alarm of RC5t583 RTC. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * drivers/rtc/rtc-spear.c: fix several error checksLars-Peter Clausen2012-10-061-7/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are several comparisons of a unsigned int to less than zero int spear RTC driver. Such a check will always be true. In all these cases a signed int is assigned to the unsigned variable, which is checked, before. So the right fix is to make the checked variable signed as well. In one case the check can be dropped completely, because all it does it returns 'err' if 'err' is less than zero, otherwise it returns 0. Since in this particular case 'err' is always either 0 or less this is the same as just returning 'err'. The issue has been found using the following coccinelle semantic patch: //<smpl> @@ type T; unsigned T i; @@ ( *i < 0 | *i >= 0 ) //</smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Viresh Kumar <viresh.kumar@st.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * drivers/rtc/rtc-jz4740.c: fix IRQ error checkLars-Peter Clausen2012-10-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The irq field of the jz4740_irc struct is unsigned. Yet we assign the result of platform_get_irq() to it. platform_get_irq() may return a negative error code and the code checks for this condition by checking if 'irq' is less than zero. But since 'irq' is unsigned this test will always be false. Fix it by making 'irq' signed. The issue was found using the following coccinelle semantic patch: //<smpl> @@ type T; unsigned T i; @@ ( *i < 0 | *i >= 0 ) //</smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * rtc: kconfig: remove unnecessary dependencies.Venu Byravarasu2012-10-061-18/+8
| | | | | | | | | | | | | | | | | | Remove "depends on RTC_CLASS = y" for multiple Kconfig definitions, as all of them are already placed under "if RTC_CLASS". Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * rtc: add MAX8907 RTC driverStephen Warren2012-10-063-0/+255
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MAX8907 is an I2C-based power-management IC containing voltage regulators, a reset controller, a real-time clock, and a touch-screen controller. The driver is based on an original by or fixed by: * Tom Cherry * Prashant Gaikwad * Joseph Yoon During upstreaming, I (swarren): * Converted to regmap. * Fixed handling of RTC_HOUR register containing 12. * Fixed handling of RTC_WEEKDAY register. * General cleanup. Signed-off-by: Stephen Warren <swarren@nvidia.com> Cc: Tom Cherry <tcherry@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Joseph Yoon <tyoon@nvidia.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * rtc: tps65910: add RTC driver for TPS65910 PMIC RTCVenu Byravarasu2012-10-063-0/+363
| | | | | | | | | | | | | | | | | | | | | | | | | | | | TPS65910 PMIC is a MFD with RTC as one of the device. Adding RTC driver for supporting RTC device present inside TPS65910 PMIC. Only support for RTC alarm is implemented as part of this patch. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * drivers/rtc/rtc-at91sam9.c: use module_platform_driver() macroDevendra Naga2012-10-061-12/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | This driver does seems to do only platform_driver_register in the init function and platform_driver_unregister in the exit function, so replace all this code including the module_init and module_exit with module_platform_driver macro... Signed-off-by: Devendra Naga <develkernel412222@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * rtc: recycle id when unloading a rtc driverVincent Palatin2012-10-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | When calling rtc_device_unregister, we are not freeing the id used by the driver. So when doing a unload/load cycle for a RTC driver (e.g. rmmod rtc_cmos && modprobe rtc_cmos), its id is incremented by one. As a consequence, we no longer have neither an rtc0 driver nor a /proc/driver/rtc (as it only exists for the first driver). Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * rtc: snvs: add Freescale rtc-snvs driverShawn Guo2012-10-063-0/+362
| | | | | | | | | | | | | | | | | | | | | | | | | | Add an RTC driver for Freescale Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * rtc: add Dallas DS2404 driverSven Schnelle2012-10-063-0/+313
| | | | | | | | | | | | | | | | [akpm@linux-foundation.org: fix warning] Signed-off-by: Sven Schnelle <svens@stackframe.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * rtc-proc: permit the /proc/driver/rtc device to use other devicesKim, Milo2012-10-062-6/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | To get time information via /proc/driver/rtc, only the first device (rtc0) is used. If the rtcN (eg. rtc1 or rtc2) is used for the system clock, there is no way to get information of rtcN via /proc/driver/rtc. With this patch, the time data can be retrieved from the system clock RTC. If the RTC_HCTOSYS_DEVICE is not defined, then rtc0 is used by default. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * drivers/rtc/rtc-isl1208.c: add support for the ISL1218Ben Gardner2012-10-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | The ISL1218 chip is identical to the ISL1208, except that it has 6 additional user-storage registers. This patch does not enable access to those additional registers, but only adds the chip name to the list. Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge tag 'mfd-3.7-1' of ↵Linus Torvalds2012-10-051-9/+34
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD changes from Samuel Ortiz: "MFD bits for the 3.7 merge window. As usual we have a few new drivers: - TI LP8788 - TI OMAP USB TLL - Maxim MAX8907 - SMSC ECE1099 - Dialog Semiconductor DA9055 - A simpler syscon driver that allow us to get rid of the anatop one. Drivers are also gradually getting Device Tree and IRQ domain support. The following drivers got DT support: - palmas, 88pm860x, tc3589x and twl4030-audio And those ones now use the IRQ domain APIs: - 88pm860x, tc3589x, db8500_prcmu Also some other interesting changes: - Intel's ICH LPC now supports Lynx Point - TI's twl4030-audio added a GPO child - tps6527 enabled its backlight subdevice - The twl6030 pwm driver moved to the new PWM subsystem And finally a bunch of cleanup and casual fixes for mc13xxx, 88pm860x, palmas, ab8500, wm8994, wm5110, max8907 and the tps65xxx family." Fix up various annoying conflicts: the DT and IRQ domain support came in twice and was already in 3.6. And then it was apparently rebased. Guys, DON'T REBASE! * tag 'mfd-3.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (89 commits) ARM: dts: Enable 88pm860x pmic mfd: 88pm860x: Move gpadc init into touch mfd: 88pm860x: Device tree support mfd: 88pm860x: Use irqdomain mfd: smsc: Add support for smsc gpio io/keypad driver backlight: tps65217_bl: Add missing platform_set_drvdata in tps65217_bl_probe mfd: DA9055 core driver mfd: tps65910: Add alarm interrupt of TPS65910 RTC to mfd device list mfd: wm5110: Add register patches for revision B mfd: wm5110: Disable control interface error report for WM5110 rev B mfd: max8907: Remove regulator-compatible from DT docs backlight: Add TPS65217 WLED driver mfd: Add backlight as subdevice to the tps65217 mfd: Provide the PRCMU with its own IRQ domain mfd: Fix max8907 sparse warning mfd: Add lp8788 mfd driver mfd: dbx500: Provide a more accurate smp_twd clock mfd: rc5t583: Fix warning messages regulator: palmas: Add DT support mfd: palmas: Change regulator defns to better suite DT ...
| * mfd: 88pm860x: Device tree supportHaojian Zhuang2012-10-021-9/+34
| | | | | | | | | | Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-10-013-7/+19
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM soc device tree updates from Olof Johansson: "Device tree conversion and enablement branch. Mostly a bunch of new bindings and setup for various platforms, but the Via/Winchip VT8500 platform is also converted over from being 100% legacy to now use device tree for probing. More of that will come for 3.8." Trivial conflicts due to removal of vt8500 files, and one documentation file that was added with slightly different contents both here and in the USb tree. * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (212 commits) arm: vt8500: Fixup for missing gpio.h ARM: LPC32xx: LED fix in PHY3250 DTS file ARM: dt: mmp-dma: add binding file arm: vt8500: Update arch-vt8500 to devicetree support. arm: vt8500: gpio: Devicetree support for arch-vt8500 arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices arm: vt8500: clk: Add Common Clock Framework support video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb serial: vt8500: Add devicetree support for vt8500-serial rtc: vt8500: Add devicetree support for vt8500-rtc arm: vt8500: Add device tree files for VIA/Wondermedia SoC's ARM: tegra: Add Avionic Design Tamonten Evaluation Carrier support ARM: tegra: Add Avionic Design Medcom-Wide support ARM: tegra: Add Avionic Design Plutux support ARM: tegra: Add Avionic Design Tamonten support ARM: tegra: dts: Add pwm label ARM: ux500: Fix SSP register address format ARM: ux500: Apply tc3589x's GPIO/IRQ properties to HREF's DT ARM: ux500: Remove redundant #gpio-cell properties from Snowball DT ARM: ux500: Add all encompassing sound node to the HREF Device Tree ...
| * \ Merge tag 'vt8500-for-next' of git://git.code.sf.net/p/linuxwmt/code into ↵Olof Johansson2012-09-231-1/+8
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | next/dt From Tony Prisk: Update arch-vt8500 and drivers to device tree and remove existing non-dt code. * tag 'vt8500-for-next' of git://git.code.sf.net/p/linuxwmt/code: arm: vt8500: Update arch-vt8500 to devicetree support. arm: vt8500: gpio: Devicetree support for arch-vt8500 arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices arm: vt8500: clk: Add Common Clock Framework support video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb serial: vt8500: Add devicetree support for vt8500-serial rtc: vt8500: Add devicetree support for vt8500-rtc arm: vt8500: Add device tree files for VIA/Wondermedia SoC's Resolved add/change conflict in drivers/clk/Makefile. Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | rtc: vt8500: Add devicetree support for vt8500-rtcTony Prisk2012-09-211-1/+8
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
| * | | Merge branch 'for-arm-soc-next' of ↵Olof Johansson2012-09-221-6/+0
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.linaro.org/people/ljones/linux-3.0-ux500 into next/dt * 'for-arm-soc-next' of git://git.linaro.org/people/ljones/linux-3.0-ux500: ARM: ux500: Fix SSP register address format ARM: ux500: Apply tc3589x's GPIO/IRQ properties to HREF's DT ARM: ux500: Remove redundant #gpio-cell properties from Snowball DT ARM: ux500: Add all encompassing sound node to the HREF Device Tree ARM: ux500: Add nodes for the MSP into the HREF Device Tree ARM: ux500: Add all known I2C sub-device nodes to the HREF DT ARM: ux500: Stop registering I2C sub-devices for HREF when DT is enabled ARM: ux500: Stop registering Audio devices for HREF when DT is enabled ARM: ux500: Add all encompassing sound node to the Snowball Device Tree ARM: ux500: Add nodes for the MSP into Device Tree ARM: ux500: Rename MSP board file to something more meaningful ARM: ux500: Remove platform registration of MSP devices ARM: ux500: Stop registering the MOP500 Audio driver from platform code ARM: ux500: Pass MSP DMA platform data though AUXDATA ARM: ux500: Fork MSP platform registration for step-by-step DT enablement ARM: ux500: Add AB8500 CODEC node to DB8500 Device Tree ARM: ux500: Clean-up MSP platform code ARM: ux500: Pass SDI DMA information though AUX_DATA to MMCI ARM: ux500: Add UART support to the HREF Device Tree ARM: ux500: Add skeleton Device Tree for the HREF reference board ... + sync to v3.6-rc6
| | * | | drivers/rtc/rtc-ab8500.c: Revoke Device Tree enablementLee Jones2012-09-201-6/+0
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All AB8500 devices are now registered via MFD core, so Device Tree capability is no longer required for probing. Here we pull the DT match table to ensure we're no longer probed during Device Tree start-up. CC: Alessandro Zummo <a.zummo@towertech.it> CC: rtc-linux@googlegroups.com Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | | Merge tag 'omap-devel-dt-merged-for-v3.7' of ↵Olof Johansson2012-09-201-7/+15
| |\ \ \ | | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Device tree related changes for omaps. Note that this branch is based on omap-cleanup-sparseirq-for-v3.7 to avoid merge conflicts with the sparseirq changes for gpio-twl4030 driver. * tag 'omap-devel-dt-merged-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: arm/dts: Mux uart pins for omap4-sdp ARM: OMAP2+: select PINCTRL in Kconfig arm/dts: Add pinctrl driver entries for omap2/3/4 arm/dts: Add omap36xx.dtsi file and rename omap3-beagle to omap3-beagle-xm ARM: dts: omap3-overo: Add support for the blue LED Documentation: dt: Update the OMAP documentation with Overo/Toby ARM: dts: OMAP3: Add support for Gumstix Overo with Tobi expansion board ARM: dts: OMAP4: Add reg and interrupts for every nodes ARM: dts: AM33XX: Specify reg and interrupt property for all nodes ARM: dts: AM33XX: Convert all hex numbers to lower-case ARM: dts: omap3-beagle: Enable audio support ARM: dts: omap5: Add McPDM and DMIC section to the dtsi file ARM: dts: omap5: Add McBSP entries ARM: dts: omap4: Add reg-names for McPDM and DMIC ARM: dts: omap4: Add McBSP entries ARM: dts: omap3: Add McBSP entries ARM: dts: omap2420-h4: Include omap2420.dtsi file instead the common omap2 ARM: dts: omap2: Add McBSP entries for OMAP2420 and OMAP2430 SoC ARM: dts: omap3-beagle: Add heartbeat and mmc LEDs support ARM: dts: omap3: Add gpio-twl4030 properties for BeagleBoard and omap3-EVM ...
| * | | Merge branch 'soc-core' of ↵Olof Johansson2012-09-054-3/+9
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt * 'soc-core' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: mach-shmobile: Add compilation support for dtbs using 'make dtbs' + sync to 3.6-rc3
| * | | | RTC: add DT bindings to pxa-rtcDaniel Mack2012-08-161-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds generic device tree bindings to the PXA RTC driver. Documentation for bindings were also added. Signed-off-by: Daniel Mack <zonque@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
* | | | | drivers/rtc/rtc-twl.c: ensure all interrupts are disabled during probeKevin Hilman2012-09-171-0/+5
| |_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some platforms, bootloaders are known to do some interesting RTC programming. Without going into the obscurities as to why this may be the case, suffice it to say the the driver should not make any assumptions about the state of the RTC when the driver loads. In particular, the driver probe should be sure that all interrupts are disabled until otherwise programmed. This was discovered when finding bursty I2C traffic every second on Overo platforms. This I2C overhead was keeping the SoC from hitting deep power states. The cause was found to be the RTC firing every second on the I2C-connected TWL PMIC. Special thanks to Felipe Balbi for suggesting to look for a rogue driver as the source of the I2C traffic rather than the I2C driver itself. Special thanks to Steve Sakoman for helping track down the source of the continuous RTC interrups on the Overo boards. Signed-off-by: Kevin Hilman <khilman@ti.com> Cc: Felipe Balbi <balbi@ti.com> Tested-by: Steve Sakoman <steve@sakoman.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Tested-by: Shubhrajyoti Datta <omaplinuxkernel@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesOlof Johansson2012-08-271-7/+15
|\ \ \ \ | |_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes for AT91 related to: - move to sparse IRQ: some drivers were forgotten - a DTS typo - the delay for removal of old at91_mci driver * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91/feature-removal-schedule: delay at91_mci removal ARM: at91/dts: remove partial parameter in at91sam9g25ek.dts ARM: at91/clock: fix PLLA overclock warning ARM: at91: fix rtc-at91sam9 irq issue due to sparse irq support ARM: at91: fix system timer irq issue due to sparse irq support
| * | | ARM: at91: fix rtc-at91sam9 irq issue due to sparse irq supportLudovic Desroches2012-08-231-7/+15
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | AT91_ID_SYS as virq is incorrect because of spare irq support which introduces NR_IRQS_LEGACY offset. It modifies rtc-at91sam9 driver in order to get irq from resources. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* | | drivers/rtc/rtc-rs5c348.c: fix hour decoding in 12-hour modeAtsushi Nemoto2012-08-211-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Correct the offset by subtracting 20 from tm_hour before taking the modulo 12. [ "Why 20?" I hear you ask. Or at least I did. Here's the reason why: RS5C348_BIT_PM is 32, and is - stupidly - included in the RS5C348_HOURS_MASK define. So it's really subtracting out that bit to get "hour+12". But then because it does things modulo 12, it needs to add the 12 in again afterwards anyway. This code is confused. It would be much clearer if RS5C348_HOURS_MASK just didn't include the RS5C348_BIT_PM bit at all, then it wouldn't need to do the silly subtract either. Whatever. It's all just math, the end result is the same. - Linus ] Reported-by: James Nute <newten82@gmail.com> Tested-by: James Nute <newten82@gmail.com> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | drivers/rtc/rtc-pcf2123.c: initialize dynamic sysfs attributesIlya Shchepetkov2012-08-211-0/+2
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | Dynamically allocated sysfs attributes must be initialized using sysfs_attr_init(), otherwise lockdep complains: BUG: key <address> not in .data! Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Ilya Shchepetkov <shchepetkov@ispras.ru> Cc: Chris Verges <chrisv@cyberswitching.com> Cc: Christian Pellegrin <chripell@fsfe.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | RTC: Avoid races between RTC alarm wakeup and suspend.NeilBrown2012-08-082-1/+2
|/ | | | | | | | | | | | | | | | | | If an RTC alarm fires just as suspend is happening, it is possible for suspend to complete and the alarm to be missed. To avoid the race, we must register the event with the PM core. As the event is made visible to userspace through a thread which is only scheduled by the interrupt, we need a pm_stay_awake/pm_relax pair preventing suspend from the interrupt until the thread completes its work. This makes the pm_wakeup_event() call in cmos_interrupt unnecessary as it provides suspend protection for all RTCs that use rtc_update_irq. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds2012-07-311-3/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge Andrew's second set of patches: - MM - a few random fixes - a couple of RTC leftovers * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (120 commits) rtc/rtc-88pm80x: remove unneed devm_kfree rtc/rtc-88pm80x: assign ret only when rtc_register_driver fails mm: hugetlbfs: close race during teardown of hugetlbfs shared page tables tmpfs: distribute interleave better across nodes mm: remove redundant initialization mm: warn if pg_data_t isn't initialized with zero mips: zero out pg_data_t when it's allocated memcg: gix memory accounting scalability in shrink_page_list mm/sparse: remove index_init_lock mm/sparse: more checks on mem_section number mm/sparse: optimize sparse_index_alloc memcg: add mem_cgroup_from_css() helper memcg: further prevent OOM with too many dirty pages memcg: prevent OOM with too many dirty pages mm: mmu_notifier: fix freed page still mapped in secondary MMU mm: memcg: only check anon swapin page charges for swap cache mm: memcg: only check swap cache pages for repeated charging mm: memcg: split swapin charge function into private and public part mm: memcg: remove needless !mm fixup to init_mm when charging mm: memcg: remove unneeded shmem charge type ...
| * rtc/rtc-88pm80x: remove unneed devm_kfreeDevendra Naga2012-07-311-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | devm_kzalloc() doesn't need a matching devm_kfree(), the freeing mechanism will trigger when driver unloads. Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Ashish Jangam <ashish.jangam@kpitcummins.com> Cc: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * rtc/rtc-88pm80x: assign ret only when rtc_register_driver failsDevendra Naga2012-07-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | At the probe we are assigning ret to return value of PTR_ERR right after the rtc_register_drive()r, as we would have done it in the if (IS_ERR(ptr)) check, since the function fails and goes inside that case Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Ashish Jangam <ashish.jangam@kpitcummins.com> Cc: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
OpenPOWER on IntegriCloud