summaryrefslogtreecommitdiffstats
path: root/drivers/rpmsg
Commit message (Collapse)AuthorAgeFilesLines
* vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds2018-02-112-3/+3
| | | | | | | | | | | | | | | | | | | | | | | This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge tag 'rpmsg-v4.16' of git://github.com/andersson/remoteprocLinus Torvalds2018-02-053-18/+54
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull rpmsg updates from Bjorn Andersson: "This fixes a few issues found in the SMD and GLINK drivers and corrects the handling of SMD channels that are found in an (previously) unexpected state" * tag 'rpmsg-v4.16' of git://github.com/andersson/remoteproc: rpmsg: smd: Fix double unlock in __qcom_smd_send() rpmsg: glink: Fix missing mutex_init() in qcom_glink_alloc_channel() rpmsg: smd: Don't hold the tx lock during wait rpmsg: smd: Fail send on a closed channel rpmsg: smd: Wake up all waiters rpmsg: smd: Create device for all channels rpmsg: smd: Perform handshake during open rpmsg: glink: smem: Ensure ordering during tx drivers: rpmsg: remove duplicate includes remoteproc: qcom: Use PTR_ERR_OR_ZERO() in glink prob
| * rpmsg: smd: Fix double unlock in __qcom_smd_send()Dan Carpenter2018-01-191-5/+5
| | | | | | | | | | | | | | | | | | We're not holding the lock here, so we shouldn't unlock. Fixes: 178f3f75bb4e ("rpmsg: smd: Don't hold the tx lock during wait") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> [bjorn: renamed "out" label to further distinguish the two exit paths] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
| * rpmsg: glink: Fix missing mutex_init() in qcom_glink_alloc_channel()Wei Yongjun2018-01-021-0/+1
| | | | | | | | | | | | | | | | | | | | qcom_glink_alloc_channel() allocates the mutex but not initialize it. Use mutex_init() on it to initialize it correctly. This is detected by Coccinelle semantic patch. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
| * rpmsg: smd: Don't hold the tx lock during waitBjorn Andersson2017-12-181-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Holding the tx lock while waiting for tx-drain events from the remote side blocks try_send requests from failing quickly, so temporarily drop the tx lock while waiting. While this allows try_send to fail quickly it also could allow a subsequent send to succeed putting a smaller packet in the FIFO while we're waiting for room for our large packet. But as this lock is per channel we expect that clients with ordering concerns implements their own ordering mechanism. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
| * rpmsg: smd: Fail send on a closed channelBjorn Andersson2017-12-181-6/+8
| | | | | | | | | | | | | | Move the check for a closed channel out from the tx-full loop to fail any send request on a non-open channel. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
| * rpmsg: smd: Wake up all waitersBjorn Andersson2017-12-181-2/+2
| | | | | | | | | | | | | | | | It's possible to have multiple contexts waiting for new channel events and with an upcoming change it's possible to have multiple contexts waiting for a full FIFO. As such we need to wake them all up. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
| * rpmsg: smd: Create device for all channelsBjorn Andersson2017-12-181-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rather than selectively creating devices only for the channels that the remote have moved to "opening" state let's create devices for all channels found. The driver model will match drivers to the ones we care about and attempt to open these. The one case where this fails is if the user loads a firmware that lacks a particular channel of the previous firmware that was running, in which case we would find the old channel and attempt to probe it. The channel opening handshake will ensure this will result in a graceful failure. The result of this patch is that we will actively open the RPM channel even though it's left in a state other than "opening" after the boot loader's closing of the channel. Tested-by: Will Newton <will.newton@gmail.com> Reported-by: Jeremy McNicoll <jmcnicol@redhat.com> Reported-by: Will Newton <will.newton@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
| * rpmsg: smd: Perform handshake during openBjorn Andersson2017-12-181-0/+30
| | | | | | | | | | | | | | | | Validate the the remote side is opening the channel that we've found by performing a handshake when opening the channel. Tested-by: Will Newton <will.newton@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
| * rpmsg: glink: smem: Ensure ordering during txBjorn Andersson2017-12-181-0/+3
| | | | | | | | | | | | | | | | | | Ensure the ordering of the fifo write and the update of the write index, so that the index is not updated before the data has landed in the fifo. Acked-By: Chris Lew <clew@codeaurora.org> Reported-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
| * drivers: rpmsg: remove duplicate includesPravin Shedge2017-12-061-2/+0
| | | | | | | | | | | | | | | | These duplicate includes have been found with scripts/checkincludes.pl but they have been removed manually to avoid removing false positives. Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* | the rest of drivers/*: annotate ->poll() instancesAl Viro2017-11-284-6/+6
|/ | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* Merge tag 'rpmsg-v4.15' of git://github.com/andersson/remoteprocLinus Torvalds2017-11-172-12/+42
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull rpmsg updates from Bjorn Andersson: - turn RPMSG_VIRTIO into a user selectable config - fix few bugs in GLINK - provide the support for specifying initial buffer sizes for GLINK channels. * tag 'rpmsg-v4.15' of git://github.com/andersson/remoteproc: rpmsg: glink: The mbox client knows_txdone rpmsg: glink: Add missing MODULE_LICENSE rpmsg: glink: Use best fit intent during tx rpmsg: glink: Add support to preallocate intents dt-bindings: soc: qcom: Support GLINK intents rpmsg: glink: Initialize the "intent_req_comp" completion variable rpmsg: Allow RPMSG_VIRTIO to be enabled via menuconfig or defconfig
| * rpmsg: glink: The mbox client knows_txdoneBjorn Andersson2017-11-151-0/+1
| | | | | | | | | | | | | | As the GLINK driver is ticking the txdone of the mailbox channel (to implement the doorbell) it needs to set knows_txdone. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
| * rpmsg: glink: Add missing MODULE_LICENSEBjorn Andersson2017-11-141-0/+3
| | | | | | | | | | | | | | | | | | | | The qcom_glink_native driver is missing a MODULE_LICENSE(), correct this. Fixes: 835764ddd9af ("rpmsg: glink: Move the common glink protocol implementation to glink_native.c") Cc: stable@vger.kernel.org Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
| * rpmsg: glink: Use best fit intent during txChris Lew2017-10-301-3/+8
| | | | | | | | | | | | | | | | Intents can vary in size, try to find the best fitting remote intent instead of first fit when sending a message to the remote proc. Signed-off-by: Chris Lew <clew@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
| * rpmsg: glink: Add support to preallocate intentsChris Lew2017-10-301-8/+27
| | | | | | | | | | | | | | | | | | | | | | The base intents prequeued during channel creation may not satisfy a channel's throughput requirement. Add support for intents dt-binding to allow channels to specify the size and amount of intents to prequeue during endpoint announcement. Signed-off-by: Chris Lew <clew@codeaurora.org> [bjorn: Altered how defaults are expressed] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
| * rpmsg: glink: Initialize the "intent_req_comp" completion variableArun Kumar Neelakantam2017-10-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | The "intent_req_comp" variable is used without initialization which results in NULL pointer dereference in qcom_glink_request_intent(). we need to initialize the completion variable before using it. Fixes: 27b9c5b66b23 ("rpmsg: glink: Request for intents when unavailable") Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
| * rpmsg: Allow RPMSG_VIRTIO to be enabled via menuconfig or defconfigAnup Patel2017-10-251-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, RPMSG_VIRTIO can only be enabled if some other kconfig option selects it. This does not allow it to be enabled for virtualized systems where Virtio RPMSG is available over Virtio MMIO or PCI transport. This patch updates RPMSG_VIRTIO kconfig option so that we can enable the VirtIO RPMSG driver via menuconfig or defconfig. The patch also removes "select RPMSG_VIRTIO" from various remoteproc kconfig options because it is now user selectable. Signed-off-by: Anup Patel <anup@brainfault.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* | License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2017-11-021-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* rpmsg: glink: Fix memory leak in qcom_glink_alloc_intent()Dan Carpenter2017-10-101-3/+8
| | | | | | | | | We need to free "intent" and "intent->data" on a couple error paths. Fixes: 933b45da5d1d ("rpmsg: glink: Add support for TX intents") Acked-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* rpmsg: glink: Unlock on error in qcom_glink_request_intent()Dan Carpenter2017-10-101-1/+2
| | | | | | | | | | If qcom_glink_tx() fails, then we need to unlock before returning the error code. Fixes: 27b9c5b66b23 ("rpmsg: glink: Request for intents when unavailable") Acked-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* rpmsg: glink: initialize ret to zero to ensure error status check is correctColin Ian King2017-09-041-3/+1
| | | | | | | | | | | | | | | | The new switch cases for RPM_CMD_RX_DONE, RPM_CMD_RX_DONE_W_REUSE, RPM_CMD_RX_INTENT_REQ_ACK, RPM_CMD_INTENT and RPM_CMD_RX_INTENT_REQ from 4 recent commits are not setting ret and so a later non-zero check on ret is testing on a garbage value in ret. Fix this by initializing ret to zero. Detected by CoverityScan CID#1455249 ("Uninitialized scalar variable") Fixes: 933b45da5d1d ("rpmsg: glink: Add support for TX intents) Fixes: dacbb35e930f ("glink: Receive and store the remote intent buffers") Fixes: 27b9c5b66b23 ("rpmsg: glink: Request for intents when unavailable") Fixes: 88c6060f5a7f ("rpmsg: glink: Handle remote rx done command") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* rpmsg: glink: fix null pointer dereference on a null intentColin Ian King2017-09-041-1/+1
| | | | | | | | | | | | | | In the case where glink->intentless is true and the call to qcom_glink_tx fails then we have a condition where ret is non-zero and intent is null, causing a null pointer deference when setting intent->in_use to false. Add an extra check to only dereference intent if intent is non-null. Detected by: CoverityScan CID#1455247 ("Explicit null dereferenced") Fixes: 88c6060f5a7f ("rpmsg: glink: Handle remote rx done command") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* rpmsg: glink: Export symbols from common codeBjorn Andersson2017-08-311-0/+3
| | | | | | | The common code needs to export the probe and remove symbols in order for the SMEM and RPM drivers to access them when compiled as a module. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* rpmsg: glink: Release idr lock before returning on errorBjorn Andersson2017-08-301-1/+1
| | | | | | | | | The idr_lock should be released in the case that we don't find the given channel. Fixes: 44f6df922a26 ("rpmsg: glink: Fix idr_lock from mutex to spinlock") Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* rpmsg: glink: Handle remote rx done commandSricharan R2017-08-291-0/+42
| | | | | | | | | | Once the remote side sends a rx done ack, check for the intent reuse information from it and suitably discard or reuse the remote passed intent buffers. Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* rpmsg: glink: Request for intents when unavailableSricharan R2017-08-291-2/+74
| | | | | | | | | | While sending data, we search for suitable sized intent to map and simply fail if a intent is not found. Instead request for a intent of required size and wait till one is alloted. Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* rpmsg: glink: Use the intents passed by remoteSricharan R2017-08-291-2/+33
| | | | | | | | | While sending data, use the remote intent id buffer of suitable size that was passed by remote previously. Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* rpmsg: glink: Receive and store the remote intent buffersSricharan R2017-08-291-1/+70
| | | | | | | | | | | Just like we allocating and sending intent ids to remote, remote side allocates and sends us the intents as well. So save the intent ids and use it later while sending data targeting the appropriate intents based on the size. Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* rpmsg: glink: Add announce_create ops and preallocate intentsSricharan R2017-08-291-0/+21
| | | | | | | | | | | | Preallocate local intent buffers and pass the intent ids to the remote. This way there are some default intents available for the remote to start sending data without having to wait by sending intent requests. Do this by adding the rpmsg announce_create ops, which gets called right after the rpmsg device gets probed. Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* rpmsg: glink: Add rx done commandSricharan R2017-08-291-0/+83
| | | | | | | | | | Send RX data receive ack to remote and also inform that local intent buffer is used and freed. This informs the remote to request for next set of intent buffers before doing a send operation. Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* rpmsg: glink: Make RX FIFO peak accessor to take an offsetBjorn Andersson2017-08-294-11/+16
| | | | | | | | | | | To fully read the received rx data from FIFO both the command and data has to be read. Currently we read command, data separately and process them. By adding an offset parameter to RX FIFO peak accessor, command and data can be read together, simplifying things. So introduce this. Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* rpmsg: glink: Use the local intents when receiving dataSricharan R2017-08-291-25/+50
| | | | | | | | | | | So previously on request from remote side, we allocated local intent buffers and passed the ids to the remote. Now when we receive data buffers from remote directed to that intent id, copy the data to the corresponding preallocated intent buffer. Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* rpmsg: glink: Add support for TX intentsSricharan R2017-08-294-5/+173
| | | | | | | | | | | | | | | | | | | | | Intents are nothing but pre-allocated buffers of appropriate size that are allocated on the local side and communicated to the remote side and the remote stores the list of intent ids that it is informed. Later when remote side is intenting to send data, it picks up a right intent (based on the size) and sends the data buffer and the intent id. Local side receives the data and copies it to the local intent buffer. The whole idea is to avoid stalls on the transport for allocating memory, used for copy based transports. When the remote request to allocate buffers using CMD_RX_INTENT_REQ, we allocate buffers of requested size, store the buffer id locally and also communicate the intent id to the remote. Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* rpmsg: glink: Fix idr_lock from mutex to spinlockSricharan R2017-08-291-20/+42
| | | | | | | | | | | The channel members lcids, rcids synchronised using the idr_lock is accessed in both atomic/non-atomic contexts. The readers are not currently synchronised. That no correct, so add the readers as well under the lock and use a spinlock. Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* rpmsg: glink: Add support for transport version negotiationSricharan R2017-08-294-6/+79
| | | | | | | | | | | | | | | | | | | G-link supports a version number and feature flags for each transport. A combination of the version number and feature flags enable/disable: (*) G-Link software updates for each edge (*) Individual features for each edge Endpoints negotiate both the version and the supported flags when the transport is opened and they cannot be changed after negotiation has been completed. Each full implementation of G-Link must support a minimum of the current version, the previous version, and the base negotiation version called v0. Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* rpmsg: glink: Introduce glink smem based transportBjorn Andersson2017-08-295-0/+328
| | | | | | | | | | | | | | The glink protocol supports different types of transports (shared memory). With the core protocol remaining the same, the way the transport's memory is probed and accessed is different. So add support for glink's smem based transports. Adding a new smem transport register function and the fifo accessors for the same. Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* rpmsg: glink: Do a mbox_free_channel in removeSricharan R2017-08-291-0/+1
| | | | | | | | mbox_request_channel is done in probe, so free the channel in remove. Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* rpmsg: glink: Return -EAGAIN when there is no FIFO spaceSricharan R2017-08-291-1/+1
| | | | | | | | | | The TX FIFO can be full, if the remote client has not read enough data (or) reading it slowly. So its nessecary to return -EAGAIN to the local client to enable retry. Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* rpmsg: glink: Allow unaligned data accessBjorn Andersson2017-08-292-7/+21
| | | | | | | | | | | | Glink protocol requires that each message is aligned on a 8 byte offset. This is purely a restriction from glink, so in order to support clients which do not adher to this, allow data packets of any size, but align the head index accordingly, effectively removing the alignment restriction. Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* rpmsg: glink: Move the common glink protocol implementation to glink_native.cBjorn Andersson2017-08-295-993/+1064
| | | | | | | | | | Move the common part of glink core protocol implementation to glink_native.c that can be shared with the smem based glink transport in the later patches. Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* rpmsg: glink: Split rpm_probe to reuse the common codeBjorn Andersson2017-08-291-36/+49
| | | | | | | | | | | | There is quite some code common in glink_rpm_probe that can reused for glink-smem based transport as well. So split the function and move the code to glink_native_probe that can be used later when we add the support for glink-smem based transport. Also reuse driver's remove as well. Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* rpmsg: glink: Associate indirections for pipe fifo accessor'sBjorn Andersson2017-08-291-38/+106
| | | | | | | | | | | | | | | | With the intention of reusing the glink core protocol commands and code across both rpm and smem based transports, the only thing different is way of accessing the shared-memory of the transport (FIFO). So put the fifo accessor's of the transport's pipe (rx/tx) behind indirections, so that the rest of the code can be shared. For this, have a qcom_glink_pipe that can be used in the common code containing the indirections and wrap it with glink_rpm_pipe that contains the transport specific members. Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* rpmsg: glink: Rename glink_rpm_xx functions to qcom_glink_xxBjorn Andersson2017-08-291-120/+128
| | | | | | | | | | Renaming the glink_rpm_xx functions and structs to qcom_glink_xx equivalents helps to reuse the core glink protocol while adding support for smem based glink transport in the later patches. Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* rpmsg: virtio_rpmsg_bus: fix sg_set_buf() when addr is not a valid kernel ↵Loic Pallardy2017-08-241-3/+25
| | | | | | | | | | | | | | address To specify memory for remoteproc, we declare (dma_declare_coherent_memory()) an area which is ioremap'ed to the vmalloc area. However, this address is not a kernel address so virt_addr_valid(buf) fails. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Tested-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* rpmsg: virtio_rpmsg: set rpmsg_buf_size customizableLoic Pallardy2017-08-241-9/+13
| | | | | | | | | | | Rpmsg buffer size is currently fixed to 512 bytes. This patch introduces a new capability in struct virtproc_info to tune shared buffer size between host and coprocessor according to the needs. Acked-by: Suman Anna <s-anna@ti.com> Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* rpmsg: virtio_rpmsg_bus: fix export of rpmsg_send_offchannel_raw()Suman Anna2017-07-261-1/+0
| | | | | | | | | | Commit 8a228ecfe086b ("rpmsg: Indirection table for rpmsg_endpoint operations") has made the rpmsg_send_offchannel_raw() a static function and local to the virtio_rpmsg_bus module, but has not dropped the corresponding EXPORT_SYMBOL. Fix this. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* rpmsg: qcom_smd: add of_node node to edge deviceSrinivas Kandagatla2017-07-261-0/+1
| | | | | | | | This patch assigns the device node to the edge device, so that the edge device drivers could read required device tree properties. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* Merge tag 'rpmsg-v4.13' of git://github.com/andersson/remoteprocLinus Torvalds2017-07-067-17/+1279
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull rpmsg updates from Bjorn Andersson: "This introduces the Qualcomm GLINK protocol driver and DeviceTree-based modalias support, as well as a number of smaller fixes" * tag 'rpmsg-v4.13' of git://github.com/andersson/remoteproc: rpmsg: Make modalias work for DeviceTree based devices rpmsg: Drop VIRTUALIZATION dependency from RPMSG_VIRTIO rpmsg: Don't overwrite release op of rpdev rpmsg: virtio_rpmsg_bus: cleanup multiple assignment to ops rpmsg: virtio_rpmsg_bus: fix nameservice address rpmsg: cleanup incorrect function in dev_err message rpmsg: virtio_rpmsg_bus: fix announce for devices without endpoint rpmsg: Introduce Qualcomm RPM glink driver soc: qcom: Add device tree binding for GLINK RPM rpmsg: Release rpmsg devices in backends
OpenPOWER on IntegriCloud