summaryrefslogtreecommitdiffstats
path: root/drivers/rapidio/rio-scan.c
Commit message (Collapse)AuthorAgeFilesLines
* rapidio: rework device hierarchy and introduce mport class of devicesAlexandre Bounine2014-04-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes an artificial RapidIO bus root device and establishes actual device hierarchy by providing reference to real parent devices. It also introduces device class for RapidIO controller devices (on-chip or an eternal bridge, known as "mport"). Existing implementation was sufficient for SoC-based platforms that have a single RapidIO controller. With introduction of devices using multiple RapidIO controllers and PCIe-to-RapidIO bridges the old scheme is very limiting or does not work at all. The implemented changes allow to properly reference platform's local RapidIO mport devices and provide device details needed for upper layers. This change to RapidIO device hierarchy does not break any known existing kernel or user space interfaces. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Stef van Os <stef.van.os@prodrive-technologies.com> Cc: Jerry Jacobs <jerry.jacobs@prodrive-technologies.com> Cc: Arno Tiemersma <arno.tiemersma@prodrive-technologies.com> Cc: Rob Landley <rob@landley.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: change endpoint device name formatAlexandre Bounine2013-07-031-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change endpoint device name format to use a component tag value instead of device destination ID. RapidIO specification defines a component tag to be a unique identifier for devices in a network. RapidIO switches already use component tag as part of their device name and also use it for device identification when processing error management event notifications. Forming an endpoint's device name using its component tag instead of destination ID allows to keep sysfs device directories unchanged in case if a routing process dynamically changes endpoint's destination ID as a result of route optimization. This change should not affect any existing users because a valid device destination ID always should be obtained by reading "destid" attribute and not by parsing device name. This patch also removes switchid member from struct rio_switch because it simply duplicates the component tag and does not have other use than in device name generation. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@Prodrive.nl> Cc: Micha Nelissen <micha.nelissen@Prodrive.nl> Cc: Stef van Os <stef.van.os@Prodrive.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: update enumerator registration mechanismAlexandre Bounine2013-07-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update enumeration/discovery method registration mechanism to allow loading enumeration/discovery methods before all mports are registered. Existing statically linked RapidIO subsystem expects that all available RapidIO mport devices are initialized and registered before the enumeration/discovery method is registered. Switching to loadable mport device drivers creates situation when mport device driver can be loaded after enumeration/discovery method is attached (e.g., loadable mport driver in a system with statically linked RapidIO core and enumerator). This also will happen in a system with hot-pluggable RapidIO controllers. To remove the dependency on the initialization/registration order this patch introduces enumeration/discovery registration mechanism that supports arbitrary registration order of mports and enumerator/discovery methods. The following registration rules are implemented: - only one enumeration/discovery method can be registered for given mport ID (including RIO_MPORT_ANY); - when new enumeration/discovery methods tries to attach to the registered mport device, method with matching mport ID will replace a default method previously registered for given mport (if any); - enumeration/discovery method with target ID=RIO_MPORT_ANY will be attached only to mports that do not have another enumerator attached to them; - when new mport device is registered with RapidIO subsystem, registration routine searches for the enumeration/discovery method with the best matching mport ID; Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@Prodrive.nl> Cc: Micha Nelissen <micha.nelissen@Prodrive.nl> Cc: Stef van Os <stef.van.os@Prodrive.nl> Cc: Jean Delvare <jdelvare@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: convert switch drivers to modulesAlexandre Bounine2013-07-031-162/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rework RapidIO switch drivers to add an option to build them as loadable kernel modules. This patch removes RapidIO-specific vmlinux section and converts switch drivers to be compatible with LDM driver registration method. To simplify registration of device-specific callback routines this patch introduces rio_switch_ops data structure. The sw_sysfs() callback is removed from the list of device-specific operations because under the new structure its functions can be handled by switch driver's probe() and remove() routines. If a specific switch device driver is not loaded the RapidIO subsystem core will use default standard-based operations to configure a switch. Because the current implementation of RapidIO enumeration/discovery method relies on availability of device-specific operations for error management, switch device drivers must be loaded before the RapidIO enumeration/discovery starts. This patch also moves several common routines from enumeration/discovery module into the RapidIO core code to make switch-specific operations accessible to all components of RapidIO subsystem. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@Prodrive.nl> Cc: Micha Nelissen <micha.nelissen@Prodrive.nl> Cc: Stef van Os <stef.van.os@Prodrive.nl> Cc: Jean Delvare <jdelvare@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/rapidio/rio-scan.c: make functions staticWu Fengguang2013-07-031-2/+2
| | | | | | | | | | | | sparse warnings: drivers/rapidio/rio-scan.c:1143:5: sparse: symbol 'rio_enum_mport' was not declared. Should it be static? drivers/rapidio/rio-scan.c:1246:5: sparse: symbol 'rio_disc_mport' was not declared. Should it be static? Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Cc: "Bounine, Alexandre" <Alexandre.Bounine@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: add enumeration/discovery start from user spaceAlexandre Bounine2013-05-241-3/+21
| | | | | | | | | | | | | | | | | Add RapidIO enumeration/discovery start from user space. User space start allows to defer RapidIO fabric scan until the moment when all participating endpoints are initialized avoiding mandatory synchronized start of all endpoints (which may be challenging in systems with large number of RapidIO endpoints). Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@Prodrive.nl> Cc: Micha Nelissen <micha.nelissen@Prodrive.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: make enumeration/discovery configurableAlexandre Bounine2013-05-241-127/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Systems that use RapidIO fabric may need to implement their own enumeration and discovery methods which are better suitable for needs of a target application. The following set of patches is intended to simplify process of introduction of new RapidIO fabric enumeration/discovery methods. The first patch offers ability to add new RapidIO enumeration/discovery methods using kernel configuration options. This new configuration option mechanism allows to select statically linked or modular enumeration/discovery method(s) from the list of existing methods or use external module(s). This patch also updates the currently existing enumeration/discovery code to be used as a statically linked or modular method. The corresponding configuration option is named "Basic enumeration/discovery" method. This is the only one configuration option available today but new methods are expected to be introduced after adoption of provided patches. The second patch address a long time complaint of RapidIO subsystem users regarding fabric enumeration/discovery start sequence. Existing implementation offers only a boot-time enumeration/discovery start which requires synchronized boot of all endpoints in RapidIO network. While it works for small closed configurations with limited number of endpoints, using this approach in systems with large number of endpoints is quite challenging. To eliminate requirement for synchronized start the second patch introduces RapidIO enumeration/discovery start from user space. For compatibility with the existing RapidIO subsystem implementation, automatic boot time enumeration/discovery start can be configured in by specifying "rio-scan.scan=1" command line parameter if statically linked basic enumeration method is selected. This patch: Rework to implement RapidIO enumeration/discovery method selection combined with ability to use enumeration/discovery as a kernel module. This patch adds ability to introduce new RapidIO enumeration/discovery methods using kernel configuration options. Configuration option mechanism allows to select statically linked or modular enumeration/discovery method from the list of existing methods or use external modules. If a modular enumeration/discovery is selected each RapidIO mport device can have its own method attached to it. The existing enumeration/discovery code was updated to be used as statically linked or modular method. This configuration option is named "Basic enumeration/discovery" method. Several common routines have been moved from rio-scan.c to make them available to other enumeration methods and reduce number of exported symbols. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@Prodrive.nl> Cc: Micha Nelissen <micha.nelissen@Prodrive.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: remove use of __devinitBill Pemberton2012-11-281-7/+7
| | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Matt Porter <mporter@kernel.crashing.org> Acked-by: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* rapidio: update for destination ID allocationAlexandre Bounine2012-10-111-22/+16
| | | | | | | | | | | | | | | | | Address comments provided by Andrew Morton: https://lkml.org/lkml/2012/10/3/550 - Keeps consistent kerneldoc compatible comments style for new static functions. - Removes unnecessary complexity from destination ID allocation routine. - Uses kcalloc() for code clarity. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: use msleep in discovery waitAlexandre Bounine2012-10-111-1/+1
| | | | | | | | | | | Use msleep() for code clarity as suggested by Andrew Morton in his comments for the original patch: https://lkml.org/lkml/2012/10/3/546. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: add destination ID allocation mechanismAlexandre Bounine2012-10-061-35/+170
| | | | | | | | | | | | | Replace the single global destination ID counter with per-net allocation mechanism to allow independent destID management for each available RapidIO network. Using bitmap based mechanism instead of counters allows destination ID release and reuse in systems that support hot-swap. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: run discovery as an asynchronous processAlexandre Bounine2012-10-061-2/+1
| | | | | | | | | | | | | | | | | | | Modify mport initialization routine to run the RapidIO discovery process asynchronously. This allows to have an arbitrary order of enumerating and discovering ports in systems with multiple RapidIO controllers without creating a deadlock situation if enumerator port is registered after a discovering one. Making netID matching to mportID ensures consistent net ID assignment in multiport RapidIO systems with asynchronous discovery process (global counter implementation is affected by race between threads). [akpm@linux-foundation.org: tweak code layput] Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: use device lists handling on per-net basisAlexandre Bounine2012-10-061-29/+31
| | | | | | | | | | | | | | Modify handling of device lists to resolve issues caused by using single global list of RIO devices during enumeration/discovery. The most common sign of existing issue is incorrect contents of switch routing tables in systems with multiple mport controllers while single-port configuration performs as expected. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: fix blocking wait for discovery readyAlexandre Bounine2012-10-061-42/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following set of patches provides modifications targeting support of multiple RapidIO master port (mport) devices on a CPU-side of RapidIO-capable board. While the RapidIO subsystem code has definitions suitable for multi-controller/multi-net support, the existing implementation cannot be considered ready for multiple mport configurations. =========== NOTES: ============= a) The patches below do not address RapidIO side view of multiport processing elements defined in Part 6 of RapidIO spec Rev.2.1 (section 6.4.1). These devices have Base Device ID CSR (0x60) and Component Tag CSR (0x6C) shared by all SRIO ports. For example, Freescale's P4080, P3041 and P5020 have a dual-port SRIO controller implemented according the specification. Enumeration/discovery of such devices from RapidIO side may require device-specific fixups. b) Devices referenced above may also require implementation specific code to setup a host device ID for mport device. These operations are not addressed by patches in this package. ================================= Details about provided patches: 1. Fix blocking wait for discovery ready While it does not happen on PowerPC based platforms, there is possibility of stalled CPU warning dump on x86 based platforms that run RapidIO discovery process if they wait too long for being enumerated. Currently users can avoid it by disabling the soft-lockup detector using "nosoftlockup" kernel parameter OR by ensuring that enumeration is completed before soft-lockup is detected. This patch eliminates blocking wait and keeps a scheduler running. It also is required for patch 3 below which introduces asynchronous discovery process. 2. Use device lists handling on per-net basis This patch allows to correctly support multiple RapidIO nets and resolves possible issues caused by using single global list of devices during RapidIO system enumeration/discovery. The most common sign of existing issue is incorrect contents of switch routing tables in systems with multiple mport controllers while single-port configuration performs as expected. The patch does not eliminate the global RapidIO device list but changes some routines in enumeration/discovery to use per-net device lists instead. This way compatibility with upper layer RIO routines is preserved. 3. Run discovery as an asynchronous process This patch modifies RapidIO initialization routine to asynchronously run the discovery process for each corresponding mport. This allows having an arbitrary order of enumerating and discovering mports without creating a deadlock situation if an enumerator port was registered after a discovering one. On boards with multiple discovering mports it also eliminates order dependency between mports and may reduce total time of RapidIO subsystem initialization. Making netID matching to mportID ensures consistent netID assignment in multiport RapidIO systems with asynchronous discovery process (global counter implementation is affected by race between threads). 4. Rework RIONET to support multiple RIO master ports In the current version of the driver rionet_probe() has comment "XXX Make multi-net safe". Now it is a good time to address this comment. This patch makes RIONET driver multi-net safe/capable by introducing per-net lists of RapidIO network peers. It also enables to register network adapters for all available mport devices. 5. Add destination ID allocation mechanism The patch replaces a single global destination ID counter with per-net allocation mechanism to allow independent destID management for each available RapidIO network. Using bitmap based mechanism instead of counters allows destination ID release and reuse in systems that support hot-swap. This patch: Fix blocking wait loop in the RapidIO discovery routine to avoid warning dumps about stalled CPU on x86 platforms. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: apply RX/TX enable to active switch ports onlyAlexandre Bounine2012-10-061-4/+5
| | | | | | | | | | | | | | | | | | | | | | Apply port RX/TX enable operations only to active switch ports. RapidIO specification (Part 6: LP-Serial Physical Layer) recommends to keep Output Port Enable (TX) and Input Port Enable (RX) control bits in disabled state (0b0) after device reset. It also allows to have implementation specific reset state for these bits. This patch ensures that TX/RX enable action is applied only to active switch's ports while preserving an initial state of inactive ones. This patch is intended to keep inactive switch ports with inbound and outbound packet transfers disabled to block unexpected packets during hot insertion event. While it does not fix any visible malfunction it is intended to prevent such events in future. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* RapidIO: fix potential null deref in rio_setup_device()Alexandre Bounine2011-11-021-1/+1
| | | | | | | | | | | | | The "goto cleanup" path can deference "rswitch" when it is NULL. Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Dan Carpenter <error27@gmail.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Chul Kim <chul.kim@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/rapidio/rio-scan.c: use discovered bit to test if enumeration is ↵Liu Gang2011-11-021-2/+2
| | | | | | | | | | | | | complete The discovered bit in PGCCSR register indicates if the device has been discovered by system host. In Rapidio systems, some agent devices can also be master devices. They can issue requests into the system. Signed-off-by: Liu Gang <Gang.Liu@freescale.com> Acked-by: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: fix use of non-compatible registersAlexandre Bounine2011-08-251-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Replace/remove use of RIO v.1.2 registers/bits that are not forward-compatible with newer versions of RapidIO specification. RapidIO specification v.1.3 removed Write Port CSR, Doorbell CSR, Mailbox CSR and Mailbox and Doorbell bits of the PEF CAR. Use of removed (since RIO v.1.3) register bits affects users of currently available 1.3 and 2.x compliant devices who may use not so recent kernel versions. Removing checks for unsupported bits makes corresponding routines compatible with all versions of RapidIO specification. Therefore, backporting makes stable kernel versions compliant with RIO v.1.3 and later as well. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Chul Kim <chul.kim@idt.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Fix common misspellingsLucas De Marchi2011-03-311-1/+1
| | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
* rapidio: fix potential null deref on failure pathDan Carpenter2011-03-231-1/+1
| | | | | | | | | | | If rio is not a switch then "rswitch" is null. Signed-off-by: Dan Carpenter <error27@gmail.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: fix new kernel-doc warningsRandy Dunlap2011-01-221-0/+2
| | | | | | | | | | | | Fix new rapidio kernel-doc warnings: Warning(drivers/rapidio/rio-scan.c:953): No description found for parameter 'prev' Warning(drivers/rapidio/rio-scan.c:953): No description found for parameter 'prev_port' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: use Component Tag for unified switch identificationAlexandre Bounine2011-01-131-5/+5
| | | | | | | | | | | | | | | | | | Change the way how switchid value is set. Local counter variable does not provide unified way to identify switch devices in a system with multiple processors. Using local counter leads to the situation when the same RIO switch has different switch ID for each processor. Replacing local counter with unique portion of the Component Tag provides unified reference to the switch by every processor in the system. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Micha Nelissen <micha@neli.hopto.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: add device object linking into discoveryAlexandre Bounine2011-01-131-4/+7
| | | | | | | | | | | | | | | | Add setting links between rio_dev objects into the discovery process. This needed to report device connections on agent (non-host) processors that perform RIO discovery. Originally, these links have been introduced for enumerating host only to support error management. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Micha Nelissen <micha@neli.hopto.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: integrate rio_switch into rio_devAlexandre Bounine2011-01-131-27/+32
| | | | | | | | | | | | | | | | | | | Convert RIO switches device structures (rio_dev + rio_switch) into a single allocation unit. This change is based on the fact that RIO switches are using common RIO device objects anyway. Allocating RIO switch objects as RIO devices with added space for switch information simplifies handling of RIO switch devices. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Micha Nelissen <micha@neli.hopto.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: use common destid storage for endpoints and switchesAlexandre Bounine2011-01-131-41/+43
| | | | | | | | | | | | | | | | | Change code to use one storage location common for switches and endpoints. This eliminates unnecessary device type checks during basic access operations. Logic that assigns destid to RIO devices stays unchanged - as before, switches use an associated destid because they do not have their own. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Micha Nelissen <micha@neli.hopto.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: add handling of redundant routesAlexandre Bounine2010-10-271-42/+46
| | | | | | | | | | | | | | | | | | | | | | Detects RIO link to the already enumerated device and properly sets links between device objects. Changes to the enumeration/discovery logic: 1. Use Master Enable bit to signal end of the enumeration - agents may start their discovery process as soon as they see this bit set (Component Tag register was used before for this purpose). 2. Enumerator sets Component Tag (!= 0) immediately during device setup. This allows to identify the device if the redundant route exists in a RIO system. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Micha Nelissen <micha@neli.hopto.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: add device access check into the enumerationAlexandre Bounine2010-10-271-0/+6
| | | | | | | | | | | | | | | Add explicit device access check before performing device enumeration. This gives a chance to clear possible link error conditions by issuing safe maintenance read request(s). Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Micha Nelissen <micha@neli.hopto.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: add relation links between RIO device structuresAlexandre Bounine2010-10-271-33/+23
| | | | | | | | | | | | | | | | Create back and forward links between RIO devices. These links are intended for use by error management and hot-plug extensions. Links for redundant RIO connections between switches are not set (will be fixed in a separate patch). Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Micha Nelissen <micha@neli.hopto.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: use stored ingress port number instead of register readAlexandre Bounine2010-10-271-27/+9
| | | | | | | | | | | | | | | The switch port information is obtained and stored during RIO device setup. Therefore repeated reads from Switch Port Information CAR may be removed. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Micha Nelissen <micha@neli.hopto.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: fix RapidIO sysfs hierarchyAlexandre Bounine2010-10-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | This set of RapidIO patches extends support for standard error recovery mechanism and adds new IDT Gen2 sRIO switch devices - CPS-1848 and CPS-1616. Implementation of the standard error-stopped state recovery mechanism (as defined by the RapidIO specification) is required for the new switches. Version 2 of this set of patches addresses received comments and fixes an error notification setup issue found in the idt_gen2.c after the first version was released. This patch: Make RapidIO devices appear in /sys/devices/rapidio directory instead of top of /sys/devices directory. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Micha Nelissen <micha@neli.hopto.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: fix new kernel-doc warningsRandy Dunlap2010-05-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Fix a bunch of new rapidio kernel-doc warnings: Warning(include/linux/rio.h:123): No description found for parameter 'comp_tag' Warning(include/linux/rio.h:123): No description found for parameter 'phys_efptr' Warning(include/linux/rio.h:123): No description found for parameter 'em_efptr' Warning(include/linux/rio.h:123): No description found for parameter 'pwcback' Warning(include/linux/rio.h:247): No description found for parameter 'set_domain' Warning(include/linux/rio.h:247): No description found for parameter 'get_domain' Warning(drivers/rapidio/rio-scan.c:1133): No description found for parameter 'rdev' Warning(drivers/rapidio/rio-scan.c:1133): Excess function parameter 'port' description in 'rio_init_em' Warning(drivers/rapidio/rio.c:349): No description found for parameter 'rdev' Warning(drivers/rapidio/rio.c:349): Excess function parameter 'mport' description in 'rio_request_inb_pwrite' Warning(drivers/rapidio/rio.c:393): No description found for parameter 'port' Warning(drivers/rapidio/rio.c:393): No description found for parameter 'local' Warning(drivers/rapidio/rio.c:393): No description found for parameter 'destid' Warning(drivers/rapidio/rio.c:393): No description found for parameter 'hopcount' Warning(drivers/rapidio/rio.c:393): Excess function parameter 'rdev' description in 'rio_mport_get_physefb' Warning(drivers/rapidio/rio.c:845): Excess function parameter 'local' description in 'rio_std_route_clr_table' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: modify initialization of switch operationsAlexandre Bounine2010-05-271-37/+12
| | | | | | | | | | | | | | Modify the way how RapidIO switch operations are declared. Multiple assignments through the linker script replaced by single initialization call. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Thomas Moll <thomas.moll@sysgo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: add enabling SRIO port RX and TXThomas Moll2010-05-271-1/+78
| | | | | | | | | | | | | Add the functionality to enable Input receiver and Output transmitter of every port, to allow non-maintenance traffic. Signed-off-by: Thomas Moll <thomas.moll@sysgo.com> Signed-off-by: Alexandre Bounine <abounine@tundra.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: add Port-Write handling for EMAlexandre Bounine2010-05-271-36/+130
| | | | | | | | | | | | | Add RapidIO Port-Write message handling in the context of Error Management Extensions Specification Rev.1.3. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Tested-by: Thomas Moll <thomas.moll@sysgo.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: add switch locking during discoveryAlexandre Bounine2010-05-271-20/+144
| | | | | | | | | | | | | | Add switch access locking during RapidIO discovery. Access lock is required when reading switch routing table contents due to indexed mechanism of RT addressing. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Tested-by: Thomas Moll <thomas.moll@sysgo.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: add IDT CPS/TSI switchesAlexandre Bounine2010-05-271-1/+19
| | | | | | | | | | | | | | | | | | | | | | | | Extentions to RapidIO switch support: 1. modify switch route operation declarations to allow using single switch-specific file for family of switches that share the same route table operations. 2. add standard route table operations for switches that that support route table manipulation registers as defined in the Rev.1.3 of RapidIO specification. 3. add clear-route-table operation for switches 4. add CPSxx and TSIxxx families of RapidIO switches Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Tested-by: Thomas Moll <thomas.moll@sysgo.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rio: warn_unused_result warnings fixYang Li2009-06-151-17/+26
| | | | | | | | | | Adding failure path for the following two cases. warning: ignoring return value of 'device_add', declared with attribute warn_unused_result warning: ignoring return value of 'sysfs_create_bin_file', declared with attribute warn_unused_result Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* rapidio: fix section mismatch warningsLi Yang2009-05-191-3/+3
| | | | | Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang2009-04-071-2/+2
| | | | | | | | Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers2008-12-161-4/+4
| | | | | | | Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
* rapidio section noiseAl Viro2008-11-301-2/+2
| | | | | | | functions calling devinit and called only from devinit Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [RAPIDIO] Auto-probe the RapidIO system sizeZhang Wei2008-04-291-16/+39
| | | | | | | | | | The RapidIO system size will auto probe in RIO setup. The route table and rionet_active in rionet.c are changed to be allocated dynamically according to the size of the system. Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* some kmalloc/memset ->kzalloc (tree wide)Yoann Padioleau2007-07-191-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc). Here is a short excerpt of the semantic patch performing this transformation: @@ type T2; expression x; identifier f,fld; expression E; expression E1,E2; expression e1,e2,e3,y; statement S; @@ x = - kmalloc + kzalloc (E1,E2) ... when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\) - memset((T2)x,0,E1); @@ expression E1,E2,E3; @@ - kzalloc(E1 * E2,E3) + kcalloc(E1,E2,E3) [akpm@linux-foundation.org: get kcalloc args the right way around] Signed-off-by: Yoann Padioleau <padator@wanadoo.fr> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <bryan.wu@analog.com> Acked-by: Jiri Slaby <jirislaby@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Acked-by: Roland Dreier <rolandd@cisco.com> Cc: Jiri Kosina <jkosina@suse.cz> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Acked-by: Pierre Ossman <drzeus-list@drzeus.cx> Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Greg KH <greg@kroah.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] rapidio: fix multi-switch enumerationAlexandre Bounine2007-02-111-31/+87
| | | | | | | | | | | | | | | | | | | | | | | This patch contains two fixes for RapisIO enumeration logic: 1. Fix enumeration in configurations with multiple switches. The patch adds: a. Enumeration of an empty switch. Empty switch is a switch that does not have any endpoint devices attached to it (except host device or previous switch in a chain). New code assigns a phony destination ID associated with the switch and sets up corresponding routes. b. Adds a second pass to the enumeration to setup routes to devices discovered after switch was scanned. 2. Fix enumeration failure when riohdid parameter has non-zero value. Current version fails to setup response path to the host when it has destination ID other that 0. Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> Acked-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Remove obsolete #include <linux/config.h>Jörn Engel2006-06-301-1/+0
| | | | | Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* [PATCH] fix more missing includesTim Schmielau2006-01-081-0/+2
| | | | | | | | | | Include fixes for 2.6.14-git11. Should allow to remove sched.h from module.h on i386, x86_64, arm, ia64, ppc, ppc64, and s390. Probably more to come since I haven't yet checked the other archs. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] rapidio: core updatesMatt Porter2005-11-071-25/+10
| | | | | | | | | Addresses issues raised with the 2.6.12-rc6-mm1 RIO support. Fix dma_mask init, shrink some code, general cleanup. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] RapidIO support: core enumMatt Porter2005-11-071-0/+960
Adds RapidIO enumeration/discovery. The core code implements enumeration/discovery, management of devices/resources, and interfaces for RIO drivers. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
OpenPOWER on IntegriCloud