summaryrefslogtreecommitdiffstats
path: root/drivers/phy/Kconfig
Commit message (Collapse)AuthorAgeFilesLines
* phy: Fix armada375 compile test build on UMKrzysztof Kozlowski2016-03-011-1/+1
| | | | | | | | | | | | The phy-armada375-usb2 driver uses IOMEM functions so COMPILE_TEST && OF build failed with: drivers/built-in.o: In function `armada375_usb_phy_probe': phy-armada375-usb2.c:(.text+0x121d): undefined reference to `devm_ioremap_resource' Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: Add driver for rockchip Display Port PHYYakir Yang2016-03-011-0/+7
| | | | | | | | | Add phy driver for the Rockchip DisplayPort PHY module. This is required to get DisplayPort working in Rockchip SoCs. Signed-off-by: Yakir Yang <ykk@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: add a driver for the Rockchip SoC internal eMMC PHYShawn Lin2016-03-011-0/+7
| | | | | | | | | This patch to add a generic PHY driver for ROCKCHIP eMMC PHY. Access the PHY via registers provided by GRF (general register files) module. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: Restrict phy-hi6220-usb to HiSilicon arm64Geert Uytterhoeven2016-02-031-0/+1
| | | | | | | | The HiSilicon Hi6220 USB PHY is available in HiSilicon Hi6220 SoCs only. Restrict it to HiSilicon arm64, unless compile-testing. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: phy_brcmstb_sata: add support for MIPS-based platformsJaedon Shin2015-12-201-2/+2
| | | | | | | | | | | | | | The BCM7xxx ARM-based and MIPS-based platforms share a similar hardware block for AHCI SATA3. This new compatible string, "brcm,bcm7425-sata-phy", may be used for most MIPS-based platforms of 40nm process technology. Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: add phy-hi6220-usbZhangfei Gao2015-12-201-0/+9
| | | | | | | | Support hi6220 use phy for HiKey board Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driverYoshihiro Shimoda2015-12-201-0/+7
| | | | | | | | | | | | | | | | | | | This patch adds support for R-Car generation 3 USB2 PHY driver. This SoC has 3 EHCI/OHCI channels, and the channel 0 is shared with the HSUSB (USB2.0 peripheral) device. And each channel has independent registers about the PHYs. So, the purpose of this driver is: 1) initializes some registers of SoC specific to use the {ehci,ohci}-platform driver. 2) detects id pin to select host or peripheral on the channel 0. For now, this driver only supports 1) above. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: sun9i-usb: add USB dependencyArnd Bergmann2015-12-031-0/+1
| | | | | | | | | | | | | | | The sun9i usb phy driver calls of_usb_get_phy_mode(), which is not available if USB is disabled: drivers/built-in.o: In function `sun9i_usb_phy_probe': :(.text+0x7fb0): undefined reference to `of_usb_get_phy_mode' This adds a dependency to avoid the randconfig build errors. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 9c3b44302636 ("phy: Add driver to support individual USB PHYs on sun9i") Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: cygnus: pcie: Add Cygnus PCIe PHY supportRay Jui2015-10-061-0/+9
| | | | | | | | | | | This patch adds the PCIe PHY support for the Broadcom PCIe RC interface on Cygnus Signed-off-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Arun Parameswaran <aparames@broadcom.com> Reviewed-by: JD (Jiandong) Zheng <jdzheng@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: add usb3.0 phy driver for mt65xx SoCsChunfeng Yun2015-10-061-0/+9
| | | | | | | support usb3.0 phy of mt65xx SoCs Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* Merge tag 'phy-for-4.3' of ↵Greg Kroah-Hartman2015-08-141-0/+13
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next Kishon writes: phy: for 4.3 *) Add new NXP USB OTG PHY driver *) Add vbus/id detection, extcon support and fixes in phy-sun4i-usb driver *) Add support to use phy-sun4i-usb driver for sun8i-a23 and sun8i-a33 SoCs *) Other trivial code cleanups, dropping .owner assignment and constify phy_ops Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * phy-sun4i-usb: Add support for monitoring vbus via a power-supplyHans de Goede2015-07-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | On some boards there is no vbus_det gpio pin, instead vbus-detection for otg can be done via the pmic. This commit adds support for monitoring vbus_det via the power_supply exported by the pmic, enabling support for otg on these boards. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * phy-sun4i-usb: Add extcon support for the otg phy (phy0)Hans de Goede2015-07-251-0/+1
| | | | | | | | | | | | | | | | | | The sunxi musb glue needs to know if a host or normal usb cable is plugged in, add extcon support so that the musb glue can monitor the host status. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * phy: add lpc18xx usb otg phy driverJoachim Eastwood2015-07-251-0/+11
| | | | | | | | | | | | | | | | | | | | Add PHY driver for the internal USB OTG PHY found on NXP LPC18xx and LPC43xx devices. This driver takes care of enabling the PHY in CREG (syscon) and setting the required clock frequency. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | phy/pxa: add HAS_IOMEM dependencySebastian Ott2015-07-151-0/+2
|/ | | | | | | | | | | | | | Fix this compile error: drivers/built-in.o: In function 'mv_usb2_phy_probe': phy-pxa-28nm-usb2.c:(.text+0x25ec): undefined reference to 'devm_ioremap_resource' drivers/built-in.o: In function 'mv_hsic_phy_probe': phy-pxa-28nm-hsic.c:(.text+0x3084): undefined reference to 'devm_ioremap_resource' Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2015-06-271-0/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS updates from Ralf Baechle: - Improvements to the tlb_dump code - KVM fixes - Add support for appended DTB - Minor improvements to the R12000 support - Minor improvements to the R12000 support - Various platform improvments for BCM47xx - The usual pile of minor cleanups - A number of BPF fixes and improvments - Some improvments to the support for R3000 and DECstations - Some improvments to the ATH79 platform support - A major patchset for the JZ4740 SOC adding support for the CI20 platform - Add support for the Pistachio SOC - Minor BMIPS/BCM63xx platform support improvments. - Avoid "SYNC 0" as memory barrier when unlocking spinlocks - Add support for the XWR-1750 board. - Paul's __cpuinit/__cpuinitdata cleanups. - New Malta CPU board support large memory so enable ZONE_DMA32. * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (131 commits) MIPS: spinlock: Adjust arch_spin_lock back-off time MIPS: asmmacro: Ensure 64-bit FP registers are used with MSA MIPS: BCM47xx: Simplify handling SPROM revisions MIPS: Cobalt Don't use module_init in non-modular MTD registration. MIPS: BCM47xx: Move NVRAM driver to the drivers/firmware/ MIPS: use for_each_sg() MIPS: BCM47xx: Don't select BCMA_HOST_PCI MIPS: BCM47xx: Add helper variable for storing NVRAM length MIPS: IRQ/IP27: Move IRQ allocation API to platform code. MIPS: Replace smp_mb with release barrier function in unlocks. MIPS: i8259: DT support MIPS: Malta: Basic DT plumbing MIPS: include errno.h for ENODEV in mips-cm.h MIPS: Define GCR_GIC_STATUS register fields MIPS: BPF: Introduce BPF ASM helpers MIPS: BPF: Use BPF register names to describe the ABI MIPS: BPF: Move register definition to the BPF header MIPS: net: BPF: Replace RSIZE with SZREG MIPS: BPF: Free up some callee-saved registers MIPS: Xtalk: Update xwidget.h with known Xtalk device numbers ...
| * PHY: Add driver for Pistachio USB2.0 PHYAndrew Bresticker2015-06-211-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a driver for the USB2.0 PHY found on the IMG Pistachio SoC. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: James Hartley <james.hartley@imgtec.com> Cc: Damien Horsley <Damien.Horsley@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/9728/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | phy: add Marvell HSIC 28nm PHYRob Herring2015-06-091-0/+10
| | | | | | | | | | | | | | | | | | Add PHY driver for the Marvell HSIC 28nm PHY. This PHY is found in PXA1928 SOC. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | phy: Add Marvell USB 2.0 OTG 28nm PHYRob Herring2015-06-091-0/+10
| | | | | | | | | | | | | | | | Add driver for USB 28nm PHY found in Marvell PXA1928 SOC. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge 4.1-rc7 into usb-nextGreg Kroah-Hartman2015-06-081-3/+7
|\ \ | |/ | | | | | | | | | | This resolves a merge issue in musb_core.c and we want the fixes that were in Linus's tree in this branch as well for testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * phy: fix Kconfig dependenciesFelipe Balbi2015-05-121-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DM816x PHY uses usb_phy_* methods and because of that, it must select USB_PHY, however, because the drivers in question (DM816x, TWL4030 and OMAP_USB2) sit outside of drivers/usb/ directory, meaning they can be built even if USB_SUPPORT=n. This patches fixes the dependencies by adding USB_SUPPORT as a dependency and making all drivers select USB_PHY (which cannot be selected through menuconfig). Note that this fixes some linking breakages when building with randconfig. Cc: Tony Lindgren <tony@atomide.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * phy: qcom-ufs: Switch dependency to ARCH_QCOMStephen Boyd2015-05-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This phy only exists on platforms under ARCH_QCOM, not ARCH_MSM. Cc: Yaniv Gardi <ygardi@codeaurora.org> Cc: Dov Levenglick <dovl@codeaurora.org> Cc: Christoph Hellwig <hch@lst.de> Cc: David Brown <davidb@codeaurora.org> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | Merge tag 'phy-for-v4.2' of ↵Greg Kroah-Hartman2015-06-031-0/+9
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next Kishon writes: phy: for 4.2 merge window *) new Broadcom SATA3 PHY driver for Broadcom STB SoCs *) new phy API to get PHY by index which is used in EHCI and OHCI controller drivers *) support specifying supply at port level used for multi-port PHYs *) sparse warning fixes in miphy PHYs *) fix pm_runtime issues in twl4030 driver Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: add Broadcom SATA3 PHY driver for Broadcom STB SoCsBrian Norris2015-05-221-0/+9
| |/ | | | | | | | | | | | | | | Supports up to two ports which can each be powered on/off and configured independently. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | phy: add driver for TI TUSB1210 ULPI PHYHeikki Krogerus2015-05-131-0/+7
|/ | | | | | | | | | | | | TUSB1210 ULPI PHY has vendor specific register for eye diagram tuning. On some platforms the system firmware has set optimized value to it. In order to not loose the optimized value, the driver stores it during probe and restores it every time the PHY is powered back on. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: David Cohen <david.a.cohen@linux.intel.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* phy: Add driver to support individual USB PHYs on sun9iChen-Yu Tsai2015-04-031-0/+11
| | | | | | | | | | | | Unlike previous Allwinner SoCs, there is no central PHY control block on the A80. Also, OTG support is completely split off into a different controller. This adds a new driver to support the regular USB PHYs. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: Add a driver for dm816x USB PHYTony Lindgren2015-04-031-0/+7
| | | | | | | | | | | | | | | | | Add a minimal driver for dm816x USB. This makes USB work on dm816x without any other changes needed as it can use the existing musb_dsps glue layer for the USB controller. Note that this phy is different from dm814x and am335x. Cc: Bin Liu <binmlist@gmail.com> Cc: Brian Hutchinson <b.hutchman@gmail.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* Merge tag 'usb-3.20-rc1' of ↵Linus Torvalds2015-02-151-0/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB patches from Greg KH: "Here's the big pull request for the USB driver tree for 3.20-rc1. Nothing major happening here, just lots of gadget driver updates, new device ids, and a bunch of cleanups. All of these have been in linux-next for a while with no reported issues" * tag 'usb-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (299 commits) usb: musb: fix device hotplug behind hub usb: dwc2: Fix a bug in reading the endpoint directions from reg. staging: emxx_udc: fix the build error usb: Retry port status check on resume to work around RH bugs Revert "usb: Reset USB-3 devices on USB-3 link bounce" uhci-hub: use HUB_CHAR_* usb: kconfig: replace PPC_OF with PPC ehci-pci: disable for Intel MID platforms (update) usb: gadget: Kconfig: use bool instead of boolean usb: musb: blackfin: remove incorrect __exit_p() USB: fix use-after-free bug in usb_hcd_unlink_urb() ehci-pci: disable for Intel MID platforms usb: host: pci_quirks: joing string literals USB: add flag for HCDs that can't receive wakeup requests (isp1760-hcd) USB: usbfs: allow URBs to be reaped after disconnection cdc-acm: kill unnecessary messages cdc-acm: add sanity checks usb: phy: phy-generic: Fix USB PHY gpio reset usb: dwc2: fix USB core dependencies usb: renesas_usbhs: fix NULL pointer dereference in dma_release_channel() ...
| * phy: add a driver for the Rockchip SoC internal USB2.0 PHYYunzhi Li2015-01-301-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | This patch to add a generic PHY driver for ROCKCHIP usb PHYs, currently this driver can support RK3288. The RK3288 SoC have three independent USB PHY IPs which are all configured through a set of registers located in the GRF (general register files) module. Signed-off-by: Yunzhi Li <lyz@rock-chips.com> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | phy: qcom-ufs: add support for QUALCOMM Technologies UFS PHY driversYaniv Gardi2015-01-201-0/+7
|/ | | | | | | | | | | This change adds a generic and common API support for ufs phy QUALCOMM Technologies. This support provides common code and also points to specific phy callbacks to differentiate between different behaviors of frequent use-cases (like power on, power off, phy calibration etc). Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Reviewed-by: Dov Levenglick <dovl@codeaurora.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
* phy: add support for USB cluster on the Armada 375 SoCGregory CLEMENT2014-11-261-0/+6
| | | | | | | | | | | | | | | | The Armada 375 SoC comes with an USB2 host and device controller and an USB3 controller. The USB cluster control register allows to manage common features of both USB controllers. This commit adds a driver integrated in the generic PHY framework to control this USB cluster feature. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> [ kishon@ti.com : Made it to use the updated devm_phy_create API and soem cosmentic changes in Kconfig file.] Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Jason Cooper <jason@lakedaemon.net>
* phy: exynos7-usbdrd: Update dependency for ARCH_EXYNOSVivek Gautam2014-11-221-1/+1
| | | | | | | | | This PHY controller is also present on Exynos7 platform in arch-exynos family. So PHY_EXYNOS5_USBDRD should now depend on ARCH_EXYNOS. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: add the Berlin USB PHY driverAntoine Tenart2014-11-211-0/+7
| | | | | | | | Add the driver driving the Marvell Berlin USB PHY. This allows to initialize the PHY and to use it from the USB driver later. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: miphy28lp: Provide support for the MiPHY28lp Generic PHYGabriel FERNANDEZ2014-11-121-0/+8
| | | | | | | | | | The MiPHY28lp is a Generic PHY which can serve various SATA or PCIe or USB3 devices. Signed-off-by: alexandre torgue <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: phy-stih41x-usb: Add usb phy support for STiH41x SoCs.Peter Griffin2014-09-241-0/+8
| | | | | | | | | This driver adds support for USB (1.1 and 2.0) phy for STiH415 and STiH416 System-On-Chips from STMicroelectronics. Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: phy-stih407-usb: Add usb picoPHY driver found on stih407 SoC familyPeter Griffin2014-09-241-0/+9
| | | | | | | | | | This is the generic phy driver for the picoPHY ports used by the USB2 and USB3 Host controllers when controlling usb2/1.1 devices. It is found on STiH407 SoC family from STMicroelectronics. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: Renesas R-Car Gen2 PHY driverSergei Shtylyov2014-09-241-0/+7
| | | | | | | | | | | | | | | | | | This PHY, though formally being a part of Renesas USBHS controller, contains the UGCTRL2 register that controls multiplexing of the USB ports (Renesas calls them channels) to the different USB controllers: channel 0 can be connected to either PCI EHCI/OHCI or USBHS controllers, channel 2 can be connected to PCI EHCI/OHCI or xHCI controllers. This is a new driver for this USB PHY currently already supported under drivers/ usb/phy/. The reason for writing the new driver was the requirement that the multiplexing of USB channels to the controller be dynamic, depending on what USB drivers are loaded, rather than static as provided by the old driver. The infrastructure provided by drivers/phy/phy-core.c seems to fit that purpose ideally. The new driver only supports device tree probing for now. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: spear1340-miphy: fix driver dependenciesBartlomiej Zolnierkiewicz2014-09-121-0/+1
| | | | | | | | | | | ST SPEAR1340-MIPHY support should be available only on ST SPEAr1340 machine. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Pratyush Anand <pratyush.anand@st.com> Cc: Mohit Kumar <mohit.kumar@st.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: spear1310-miphy: fix driver dependenciesBartlomiej Zolnierkiewicz2014-09-121-0/+1
| | | | | | | | | | | ST SPEAR1310-MIPHY support should be available only on ST SPEAr1310 machine. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Pratyush Anand <pratyush.anand@st.com> Cc: Mohit Kumar <mohit.kumar@st.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: miphy365x: Select GENERIC_PHY instead of depending on itLee Jones2014-08-281-1/+1
| | | | | | | | | | Enabling GENERIC_PHY in the shared (by most ARM sub-architectures) defconfig multi_v7_defconfig is prohibited. Instead, we'll enable it from the Kconfig whenever PHY_MIPHY365X is enabled. Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* Merge tag 'drivers-for-3.17' of ↵Linus Torvalds2014-08-081-7/+19
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Olof Johansson: "A handful of driver-related changes. We've had a bunch of them going in through other branches as well, so it's only a part of what we really have this release. Larger pieces are: - Removal of a now unused PWM driver for atmel [ This includes AVR32 changes that have been appropriately acked ] - Performance counter support for the arm CCN interconnect - OMAP mailbox driver cleanups and consolidation - PCI and SATA PHY drivers for SPEAr 13xx platforms - Redefinition (with backwards compatibility!) of PCI DT bindings for Tegra to better model regulators/power" Note: this merge also fixes up the semantic conflict with the new calling convention for devm_phy_create(), see commit f0ed817638b5 ("phy: core: Let node ptr of PHY point to PHY and not of PHY provider") that came in through Greg's USB tree. Semantic merge patch by Stephen Rothwell <sfr@canb.auug.org.au> through the next tree. * tag 'drivers-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) bus: arm-ccn: Fix error handling at event allocation mailbox/omap: add a parent structure for every IP instance mailbox/omap: remove the private mailbox structure mailbox/omap: consolidate OMAP mailbox driver mailbox/omap: simplify the fifo assignment by using macros mailbox/omap: remove omap_mbox_type_t from mailbox ops mailbox/omap: remove OMAP1 mailbox driver mailbox/omap: use devm_* interfaces bus: ARM CCN: add PERF_EVENTS dependency bus: ARM CCN PMU driver PCI: spear: Remove spear13xx_pcie_remove() PCI: spear: Fix Section mismatch compilation warning for probe() ARM: tegra: Remove legacy PCIe power supply properties PCI: tegra: Remove deprecated power supply properties PCI: tegra: Implement accurate power supply scheme ARM: SPEAr13xx: Update defconfigs ARM: SPEAr13xx: Add pcie and miphy DT nodes ARM: SPEAr13xx: Add bindings and dt node for misc block ARM: SPEAr13xx: Fix static mapping table phy: Add drivers for PCIe and SATA phy on SPEAr13xx ...
| * phy: Add drivers for PCIe and SATA phy on SPEAr13xxPratyush Anand2014-07-141-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | ARM based ST Microelectronics's SPEAr1310/40 platforms uses ST's phy (known as 'miphy') for PCIe and SATA. This patch adds drivers for these miphys. This also adds proper bindings for miphys. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Tested-by: Mohit Kumar <mohit.kumar@st.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> [viresh: fixed logs/cclist/checkpatch warnings, broken into smaller patches] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* | Merge tag 'soc-for-3.17' of ↵Linus Torvalds2014-08-081-0/+10
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "This is the bulk of new SoC enablement and other platform changes for 3.17: - Samsung S5PV210 has been converted to DT and multiplatform - Clock drivers and bindings for some of the lower-end i.MX 1/2 platforms - Kirkwood, one of the popular Marvell platforms, is folded into the mvebu platform code, removing mach-kirkwood - Hwmod data for TI AM43xx and DRA7 platforms - More additions of Renesas shmobile platform support - Removal of plat-samsung contents that can be removed with S5PV210 being multiplatform/DT-enabled and the other two old platforms being removed New platforms (most with only basic support right now): - Hisilicon X5HD2 settop box chipset is introduced - Mediatek MT6589 (mobile chipset) is introduced - Broadcom BCM7xxx settop box chipset is introduced + as usual a lot other pieces all over the platform code" * tag 'soc-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (240 commits) ARM: hisi: remove smp from machine descriptor power: reset: move hisilicon reboot code ARM: dts: Add hix5hd2-dkb dts file. ARM: debug: Rename Hi3716 to HIX5HD2 ARM: hisi: enable hix5hd2 SoC ARM: hisi: add ARCH_HISI MAINTAINERS: add entry for Broadcom ARM STB architecture ARM: brcmstb: select GISB arbiter and interrupt drivers ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs ARM: configs: enable SMP in bcm_defconfig ARM: add SMP support for Broadcom mobile SoCs Documentation: arm: misc updates to Marvell EBU SoC status Documentation: arm: add URLs to public datasheets for the Marvell Armada XP SoC ARM: mvebu: fix build without platforms selected ARM: mvebu: add cpuidle support for Armada 38x ARM: mvebu: add cpuidle support for Armada 370 cpuidle: mvebu: add Armada 38x support cpuidle: mvebu: add Armada 370 support cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7 ARM: mvebu: export the SCU address ...
| * | phy: Add support for S5PV210 to the Exynos USB 2.0 PHY driverMateusz Krawczuk2014-07-191-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the Samsung's S5PV210 SoC to the Exynos USB 2.0 PHY driver. Signed-off-by: Mateusz Krawczuk <m.krawczuk@partner.samsung.com> [k.debski@samsung.com: cleanup and commit description] [k.debski@samsung.com: make changes accordingly to the mailing list comments] Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* | | phy: miphy365x: Provide support for the MiPHY356x Generic PHYLee Jones2014-07-221-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MiPHY365x is a Generic PHY which can serve various SATA or PCIe devices. It has 2 ports which it can use for either; both SATA, both PCIe or one of each in any configuration. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | | phy: qcom: Add driver for QCOM IPQ806x SATA PHYKumar Gala2014-07-221-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | Add a PHY driver for uses with AHCI based SATA controller driver on the IPQ806x family of SoCs. Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | | phy: add a driver for the Berlin SATA PHYAntoine Ténart2014-07-221-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Berlin SoC has a two SATA ports. Add a PHY driver to handle them. The mode selection can let us think this PHY can be configured to fit other purposes. But there are reasons to think the SATA mode will be the only one usable: the PHY registers are only accessible indirectly through two registers in the SATA range, the PHY seems to be integrated and no information tells us the contrary. For these reasons, make the driver a SATA PHY driver. Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | | phy: Remove ARCH_KIRKWOOD dependencyAndrew Lunn2014-07-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mach-kirkwood has been removed, now that kirkwood lives in mach-mvebu. Depend on MACH_KIRKWOOD, which will be set when these SoCs are built as part of mach-mvebv. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | | phy: qcom: Add driver for QCOM APQ8064 SATA PHYSrinivas Kandagatla2014-07-221-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a PHY driver for uses with AHCI based SATA controller driver on the APQ8064 family of SoCs. This patch is a forward port from Qualcomm's v3.4 andriod kernel. Tested on IFC6410 board. CC: Sujit Reddy Thumma <sthumma@codeaurora.org> Tested-by: Kiran Padwal <kiran.padwal@smartplayin.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | | phy: Kconfig: Update config for Exynos USB DRDSachin Kamat2014-07-221-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | USB DWC3 driver on Exynos platform does not work without its corresponding phy driver. Hence make the PHY driver depend on Exynos DWC3 driver and default it to yes to make things easier for the end user. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Tested-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
OpenPOWER on IntegriCloud