summaryrefslogtreecommitdiffstats
path: root/drivers/pci
Commit message (Collapse)AuthorAgeFilesLines
* [PATCH] PCI quirk: VIA IRQ fixup should only run for VIA southbridgesChris Wedgwood2006-04-271-2/+4
| | | | | | | | | | | | | Alan Cox pointed out that the VIA 'IRQ fixup' was erroneously running on my system which has no VIA southbridge (but I do have a VIA IEEE 1394 device). This should address that. I also changed "Via IRQ" to "VIA IRQ" (initially I read Via as a capitalized via (by way/means of). Signed-off-by: Chris Wedgwood <cw@f00f.org> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: fix potential resource leak in drivers/pci/msi.cJesper Juhl2006-04-271-1/+3
| | | | | | | | | The coverity checker spotted (as entry #599) that we might leak `entry' in drivers/pci/msi.c::msix_capability_init() This patch should take care of that. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] MSI-K8T-Neo2-Fir OnboardSound and additional SoundcardJohannes Goecke2006-04-201-0/+29
| | | | | | | | | | | | | | | | | | | | On the MSI-K8T-NEO2 FIR ( Athlon-64, Socket 939 with VIA-K8T800- Chipset and onboard Sound,... ) the BIOS lets you choose "DISABLED" or "AUTO" for the On-Board Sound Device. If you add another PCI-Sound-Card the BIOS disables the on-board device. So far I have a Quirk, that does set the correspondent BIT in the PCI-registers to enable the soundcard. But how to ensure that the code is executed ONLY on excactly this kind of boards (not any other with similar Chipset)? Cc: Jaroslav Kysela <perex@suse.cz> Acked-by: Takashi Iwai <tiwai@suse.de> Cc: Lee Revell <rlrevell@joe-job.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds2006-04-145-33/+218
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (169 commits) commit 78a596b4490e17b9990d87b9d468ef5bb70daa10 Author: Adrian Bunk <bunk@stusta.de> Date: Fri Mar 31 01:38:12 2006 -0800 [PATCH] remove kernel/power/pm.c:pm_unregister() Since the last user is removed in -mm, we can now remove this long deprecated function. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> commit 21440d313358043b0ce5e43b00ff3c9b35a8616c Author: David Brownell <david-b@pacbell.net> Date: Sat Apr 1 10:21:52 2006 -0800 [PATCH] dma doc updates ...
| * [PATCH] PCI: Add PCI quirk for SMBus on the Asus A6VA notebookJean Delvare2006-04-141-0/+2
| | | | | | | | | | | | | | | | The Asus A6VA notebook was reported to need a PCI quirk to unhide the SMBus. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] PCI: rpaphp: remove init error conditionJohn Rose2006-04-141-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The init function for the RPA PCI Hotplug driver returns -ENODEV in the case that no hotplug-capable slots are detected in the system. This is bad, since hot-capable slots can be added after boot to a purely virtual POWER partition. This is also bad because DLPAR I/O operations depend on the rpaphp module. Change the rpaphp init module to return success for the case of partitions that own no hotplug-capable slots at boot. Such slots can be dynamically added after boot. Signed-off-by: John Rose <johnrose@austin.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] pci_ids.h: correct naming of 1022:7450 (AMD 8131 Bridge)John W. Linville2006-04-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The naming of the constant defined for PCI ID 1022:7450 does not seem to match the information at http://pciids.sourceforge.net/: http://pci-ids.ucw.cz/iii/?i=1022 There 1022:7450 is listed as "AMD-8131 PCI-X Bridge" while 1022:7451 is listed as "AMD-8131 PCI-X IOAPIC". Yet, the current definition for 0x7450 is PCI_DEVICE_ID_AMD_8131_APIC. It seems to me like that name should map to 0x7451, while a name like PCI_DEVICE_ID_AMD_8131_BRIDGE should map to 0x7450. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] PCI: MSI(X) save/restore for suspend/resumeShaohua Li2006-04-143-29/+215
| | | | | | | | | | | | | | Add MSI(X) configure sapce save/restore in generic PCI helper. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [PATCH] pm: print name of failed suspend functionAndrew Morton2006-04-142-4/+8
|/ | | | | | | | | | | | | | | | | | | | Print more diagnostic info to help identify the source of power management suspend failures. Example: usb_hcd_pci_suspend(): pci_set_power_state+0x0/0x1af() returns -22 pci_device_suspend(): usb_hcd_pci_suspend+0x0/0x11b() returns -22 suspend_device(): pci_device_suspend+0x0/0x34() returns -22 Work-in-progress. It needs lots more suspend_report_result() calls sprinkled everywhere. Cc: Patrick Mochel <mochel@digitalimplant.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Nigel Cunningham <nigel@suspend2.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] sem2mutex: misc static one-file mutexesIngo Molnar2006-03-262-15/+16
| | | | | | | | | | | | | | | | | | | | | | Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jens Axboe <axboe@suse.de> Cc: Neil Brown <neilb@cse.unsw.edu.au> Acked-by: Alasdair G Kergon <agk@redhat.com> Cc: Greg KH <greg@kroah.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] acpiphp: fix acpi_path_nameMUNEDA Takahiro2006-03-233-43/+27
| | | | | | | | | | I encountered the problem that the insmod of the acpiphp fails because of the mis-freeing of the memory. I tested this patch on my tiger4 box. Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] ibmphp: remove TRUE and FALSEKristen Accardi2006-03-236-85/+83
| | | | | | | This patch removes the defines TRUE and FALSE and just uses 0 or 1. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI Hotplug: add common acpi functions to coreKristen Accardi2006-03-2314-591/+254
| | | | | | | | | | | | | | | | shpchprm_acpi.c and pciehprm_acpi.c are nearly identical. In addition, there are functions in both these files that are also in acpiphp_glue.c. This patch will remove duplicate functions from shpchp, pciehp, and acpiphp and move this functionality to pci_hotplug, as it is not hardware specific. Get rid of shpchprm* and pciehprm* files since they are no longer needed. shpchprm_nonacpi.c and pciehprm_nonacpi.c are identical, as well as shpchprm_legacy.c and can be replaced with a macro. This patch also changes acpiphp to use the common hpp code. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: kzalloc() conversion in drivers/pciEric Sesterhenn2006-03-2314-169/+75
| | | | | | | | this patch converts drivers/pci to kzalloc usage. Compile tested with allyes config. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] acpiphp: Scan slots under the nested P2P bridgeKenji Kaneshige2006-03-231-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current ACPIPHP driver scans only slots under the top level PCI-to-PCI bridge. So hotplug PCI slots under the nested PCI-to-PCI bridge would not be detected. For example, if the system has the ACPI namespace like below, hotplug slots woule not be detected. Device (PCI0) { /* Root bridge */ Name (_HID, "PNP0A03") Device (P2PA) { /* PCI-to-PCI bridge */ Name (_ADR, ...) Device (P2PB) { /* PCI-to-PCI bridge */ Name (_ADR, ...) Device (S0F0) { /* hotplug slot */ Name (_ADR, ...) Name (_SUN, ...) Method (_EJ0, ...) { ... } } ... Device (S0F7) { /* hotplug slot */ Name (_ADR, ...) Name (_SUN, ...) Method (_EJ0, ...) { ... } } Device (S1F0) { /* hotplug slot */ Name (_ADR, ...) Name (_SUN, ...) Method (_EJ0, ...) { ... } } ... } } } This patch fixes this issue. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI Hotplug: SN: Fix cleanup on hotplug removal of PPBJohn Keller2006-03-231-8/+8
| | | | | | | | | When doing a hotplug removal of a PPB, sn_bus_store_sysdata() needs to be called for the PPB and all of its children. Acked-by: Prarit Bhargava <prarit@sgi.com> Signed-off-by: John Keller <jpk@sgi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] shpchp: cleanup bus speed handlingKenji Kaneshige2006-03-232-429/+189
| | | | | | | | The code related to handling bus speed in SHPCHP driver is unnecessarily complex. This patch cleans up and simplify that. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: fix pci_request_region[s] argJeff Garzik2006-03-231-2/+2
| | | | | | | | Add missing 'const' to pci_request_region[s] 'res_name' arg, since we pass it directly to __request_region(), whose 'name' arg is also const. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: Provide a boot parameter to disable MSIMatthew Wilcox2006-03-234-2/+22
| | | | | | | | | | | | Several drivers are starting to grow options to disable MSI. However, it's often a host chipset issue, not something which individual drivers should handle. So we add the pci=nomsi kernel parameter to allow the user to disable MSI modes for systems we haven't added to the quirk list yet. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: the scheduled removal of PCI_LEGACY_PROCAdrian Bunk2006-03-232-143/+0
| | | | | | | This patch contains the scheduled removal of PCI_LEGACY_PROC. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: cpqphp_ctrl.c: board_replaced(): remove dead codeAdrian Bunk2006-03-231-62/+14
| | | | | | | | | | | | | | | | | | | | | | | | The Coverity checker correctly noted, that in function board_replaced in drivers/pci/hotplug/cpqphp_ctrl.c, the variable src always has the value 8, and therefore much code after the ... if (rc || src) { ... if (rc) return rc; else return 1; } ... can never be called. This patch removes the unreachable code in this function fixing kernel Bugzilla #6073. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] acpiphp: fix bridge handleMUNEDA Takahiro2006-03-231-2/+2
| | | | | | | | | | | | When hotplug slot is under the host bridge, DEVICE_ACPI_HANDLE(&bus->self->dev) fails since '&bus->self' was not set. This patch fixes it. This patch is based on kristen's latest patches. I tested this patch on my Tiger4. Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] acpiphp - slot management fix - V4MUNEDA Takahiro2006-03-233-98/+87
| | | | | | | | | | | | | | o This patch removes IDs (for slots management). o This patch removes the slot register/unregister processes from the init/exit phases. Instead, adds these processes in the bridge add/cleanup phases. o Currently, this change doesn't have any meanings. But these changes are needed to support p2p bridge(with hotplug slot) Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] acpiphp: add dock event handlingKristen Accardi2006-03-235-24/+545
| | | | | | | | | | | | | | | | | | | | These patches add generic dock event handling to acpiphp. If there are pci devices that need to be inserted/removed after the dock event, the event notification will be handed down to the normal pci hotplug event handler in acpiphp so that new bridges/devices can be enumerated. Because some dock stations do not have pci bridges or pci devices that need to be inserted after a dock, acpiphp will remain loaded to handle dock events even if no hotpluggable pci slots are discovered. You probably need to have the pci=assign-busses kernel parameter enabled to use these patches, and you may not allow ibm_acpi to handle docking notifications and use this patch. This patch incorporates feedback provided by many. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] acpiphp: add new bus to acpiKristen Accardi2006-03-231-2/+109
| | | | | | | | | | | If we add a new bridge with subordinate busses, we should call make sure that acpi is notified so that the PRT (if present) can be read and drivers who have registered on this bus will be notified when it is started. Also make sure to use the max reserved bus number for the starting the bus scan. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: Move pci_dev_put outside a spinlockAlan Stern2006-03-231-2/+2
| | | | | | | | This patch (as659) fixes a might_sleep problem in the PCI core, by moving a call to pci_dev_put() outside the scope of a spinlock. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: PCI/Cardbus cards hidden, needs pci=assign-busses to fixBernhard Kaindl2006-03-231-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "In some cases, especially on modern laptops with a lot of PCI and cardbus bridges, we're unable to assign correct secondary/subordinate bus numbers to all cardbus bridges due to BIOS limitations unless we are using "pci=assign-busses" boot option." -- Ivan Kokshaysky (from a patch comment) Without it, Cardbus cards inserted are never seen by PCI because the parent PCI-PCI Bridge of the Cardbus bridge will not pass and translate Type 1 PCI configuration cycles correctly and the system will fail to find and initialise the PCI devices in the system. Reference: PCI-PCI Bridges: PCI Configuration Cycles and PCI Bus Numbering: http://www.science.unitn.it/~fiorella/guidelinux/tlk/node72.html The reason for this is that: ``All PCI busses located behind a PCI-PCI bridge must reside between the secondary bus number and the subordinate bus number (inclusive).'' "pci=assign-busses" makes pcibios_assign_all_busses return 1 and this turns on PCI renumbering during PCI probing. Alan suggested to use DMI automatically set assign-busses on problem systems. The only question for me was where to put it. I put it directly before scanning PCI bus into pcibios_scan_root() because it's called from legacy, acpi and numa and so it can be one place for all systems and configurations which may need it. AMD64 Laptops are also affected and fixed by assign-busses, and the code is also incuded from arch/x86_64/pci/ that place will also work for x86_64 kernels, I only ifdef'-ed the x86-only Laptop in this example. Affected and known or assumed to be fixed with it are (found by googling): * ASUS Z71V and L3s * Samsung X20 * Compaq R3140us and all Compaq R3000 series laptops with TI1620 Controller, also Compaq R4000 series (from a kernel.org bugreport) * HP zv5000z (AMD64 3700+, known that fixup_parent_subordinate_busnr fixes it) * HP zv5200z * IBM ThinkPad 240 * An IBM ThinkPad (1.8 GHz Pentium M) debugged by Pavel Machek gives the correspondig message which detects the possible problem. * MSI S260 / Medion SIM 2100 MD 95600 The patch also expands the "try pci=assign-busses" warning so testers will help us to update the DMI table. Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: fix problems with MSI-X on ia64Grant Grundler2006-03-231-13/+24
| | | | | | | | | | | | | | | | | | | | Use "unsigned long" when dealing with PCI resources. The BAR Indicator Register (BIR) can be a 64-bit value or the resource could be a 64-bit host physical address. Enables ib_mthca and cciss drivers to use MSI-X on ia64 HW. Problem showed up now because of new system firmware on one platform. Symptom will either be memory corruption or MCA. Second part of this patch deals with "useless" code. We walk through the steps to find the phys_addr and then don't use the result. I suspect the intent was to zero out the respective MSI-X entry but I'm not sure at the moment. Delete the code inside the #if 0/#endif if it's really not needed. Signed-off-by: Grant Grundler <iod00d@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: remove msi save/restore code in specific driverShaohua Li2006-03-232-63/+4
| | | | | | | Remove pcie port driver's msi save/restore code. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: make MSI quirk inheritable from the pci busMichael S. Tsirkin2006-03-233-2/+9
| | | | | | | | It turns out AMD 8131 quirk only affects MSI for devices behind the 8131 bridge. Handle this by adding a flags field in pci_bus, inherited from parent to child. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: quirk for asus a8v and a8v delux motherboardsBauke Jan Douma2006-03-231-0/+31
| | | | | | | | | On ASUS A8V and A8V Deluxe boards, the onboard AC97 audio controller and MC97 modem controller are deactivated when a second PCI soundcard is present. This patch enables them. Signed-off-by: Bauke Jan Douma <bjdouma@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: SMBus unhide on HP Compaq nx6110tomek@koprowski.org2006-03-231-0/+6
| | | | | | | | I attach a trivial patch for 2.6.15.4 that unhides SMBus controller on an HP Compaq nx6110 notebook. Signed-off-by: Tomasz Koprowski <tomek@koprowski.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: Add pci_device_shutdown to pci_bus_typeBrian Gerst2006-03-231-8/+1
| | | | | | | | | The extra compatability code is not necessary. Any code still using the old shutdown method will trigger the warning in driver_register() instead. Signed-off-by: Brian Gerst <bgerst@didntduck.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] shpchp: adapt to pci driver modelKenji Kaneshige2006-03-232-23/+7
| | | | | | | | This patch adapts SHPCHP driver to the PCI device driver model. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] shpchp: Fix slot state handlingKenji Kaneshige2006-03-233-61/+181
| | | | | | | | | | | | | | | | | | | | | | | | Current SHPCHP driver doesn't care about the confliction between hotplug operation via sysfs and hotplug operation via attention button. So if those ware conflicted, slot could be an unexpected state. This patch changes SHPCHP driver to handle slot state properly. With this patch, slot events are handled according to the current slot state as shown at the Table below. Table. Slot States and Event Handling ========================================================================= Slot State Event and Action ========================================================================= STATIC - Go to POWERON state if user initiates (Slot enabled, insertion request via sysfs Slot disabled) - Go to POWEROFF state if user initiates removal request via sysfs - Go to BLINKINGON state if user presses attention button when the slot is disabled - Go to BLINKINGOFF state if user presses attention button when the slot is enabled
* [PATCH] shpchp: event handling reworkKenji Kaneshige2006-03-234-266/+119
| | | | | | | | | | | | | | The event handler of SHPCHP driver is unnecessarily very complex. In addition, current event handler can only a fixed number of events at the same time, and some of events would be lost if several number of events happened at the same time. This patch simplify the event handler by using 'work queue', and it also fix the above-mentioned issue. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] shpchp: Remove unused wait_for_ctrl_irqKenji Kaneshige2006-03-232-22/+1
| | | | | | | | | The wait_for_ctrl_irq() function in SHPCHP driver is no longer needed. This patch removes that. This patch has no functional change. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] shpchp: Remove unused pci_bus member from controller structureKenji Kaneshige2006-03-232-13/+1
| | | | | | | | | This patch removes unused 'pci_bus' member from controller structure. This patch have no functional change. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: Avoid leaving MASTER_ABORT disabled permanently when returning ↵Ralf Baechle2006-03-231-7/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | from pci_scan_bridge. > On Mon, Feb 13, 2006 at 05:13:21PM -0800, David S. Miller wrote: > > > > In drivers/pci/probe.c:pci_scan_bridge(), if this is not the first > > pass (pass != 0) we don't restore the PCI_BRIDGE_CONTROL_REGISTER and > > thus leave PCI_BRIDGE_CTL_MASTER_ABORT off: > > > > int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev * dev, int max, int pass) > > { > > ... > > /* Disable MasterAbortMode during probing to avoid reporting > > of bus errors (in some architectures) */ > > pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bctl); > > pci_write_config_word(dev, PCI_BRIDGE_CONTROL, > > bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT); > > ... > > if ((buses & 0xffff00) && !pcibios_assign_all_busses() && !is_cardbus) { > > unsigned int cmax, busnr; > > /* > > * Bus already configured by firmware, process it in the first > > * pass and just note the configuration. > > */ > > if (pass) > > return max; > > ... > > } > > > > pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl); > > ... > > > > This doesn't seem intentional. Agreed, looks like an accident. The patch [1] originally came from Kip Walker (Broadcom back then) between 2.6.0-test3 and 2.6.0-test4. As I recall it was supposed to fix an issue with with PCI aborts being signalled by the PCI bridge of the Broadcom BCM1250 family of SOCs when probing behind pci_scan_bridge. It is undeseriable to disable PCI_BRIDGE_CTL_MASTER_ABORT in pci_{read,write)_config_* and the behaviour wasn't considered a bug in need of a workaround, so this was put in probe.c. I don't have an affected system at hand, so can't really test but I propose something like the below patch. [1] http://www.linux-mips.org/git?p=linux.git;a=commit;h=599457e0cb702a31a3247ea6a5d9c6c99c4cf195 [PCI] Avoid leaving MASTER_ABORT disabled permanently when returning from pci_scan_bridge. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] shpchp - Fix incorrect return value of interrupt handlerKenji Kaneshige2006-03-231-8/+3
| | | | | | | | | | | | | | | | | | Current SHPCHP driver has a bug in its interrupt handler which cause "IRQ #: nobody cared" oops. This problem can be reproduced easily by the following operation. # cd /sys/bus/pci/slots/<slot#> # while true; do echo 1 > attention ; done & The reason is that when command complete interrupt is raised, current SHPCHP driver's interrupt handler returns IRQ_NONE regardless of if the interrupt is handled or not. This patch fixes this issue. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] shpchp - move slot name into struct slotKenji Kaneshige2006-03-232-11/+5
| | | | | | | This patch moves slot name area into struct slot. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] shpchp - removed unncessary 'magic' member from slotKenji Kaneshige2006-03-232-7/+0
| | | | | | | | This patch removes unnecessary 'magic' member from struct slot of SHPCHP driver. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] shpchp - replace kmalloc() with kzalloc() and cleanup arg of sizeof()Kenji Kaneshige2006-03-232-13/+6
| | | | | | | | This patch replaces kmalloc() and memset() pair with kzalloc() and cleans up the arg of sizeof() in SHPCHP driver. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] pcihp_skeleton.c cleanupKenji Kaneshige2006-03-231-22/+11
| | | | | | | | | | | This patch cleans up pcihp_skelton.c as follows. o Move slot name area into struct slot. o Replace kmalloc with kzalloc and clean up the arg of sizeof() o Fix the wrong use of get_*_status() functions. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] shpchp - bugfix: add missing serializationKenji Kaneshige2006-03-231-42/+24
| | | | | | | | | | | | | | | | Current shpchp driver might cause system panic because of lack of serialization. It can be reproduced very easily by the following operation. # cd /sys/bus/pci/slots/<slot#> # while true; do echo 0 > power ; echo 1 > power ; done & # while true; do echo 0 > power ; echo 1 > power ; done & This patch fixes this issue by changing shpchp to get appropreate semaphore for hot-plug operation. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] shpchp - cleanup check command statusKenji Kaneshige2006-03-233-123/+23
| | | | | | | | This patch cleanups codes that check the command status. For this, it introduces a new semaphore "cmd_sem" for each controller. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] shpchp - cleanup controller listKenji Kaneshige2006-03-233-21/+10
| | | | | | | | This patch changes SHPCHP driver to use list_head structure for managing controller list. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] shpchp - cleanup slot listKenji Kaneshige2006-03-232-23/+17
| | | | | | | | This patch changes SHPCHP driver to use list_head structure for managing slot list. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] shpchp - cleanup shpchp_core.cKenji Kaneshige2006-03-231-48/+36
| | | | | | | | This patch cleanups some codes in shpchp_core.c. This patch has no functional changes. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] shpchp - cleanup init_slots()Kenji Kaneshige2006-03-232-64/+63
| | | | | | | | This patch cleanups init_slots() function of SHPCHP driver based on pcihp_skelton.c. This patch has no functional change. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
OpenPOWER on IntegriCloud