summaryrefslogtreecommitdiffstats
path: root/drivers/pci/pcie
Commit message (Collapse)AuthorAgeFilesLines
* const: constify remaining dev_pm_opsAlexey Dobriyan2009-12-151-1/+1
| | | | | | Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* PCI: fix BUG_ON triggered by logical PCIe root port removalKenji Kaneshige2009-12-041-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This problem happened when removing PCIe root port using PCI logical hotplug operation. The immediate cause of this problem is that the pointer to invalid data structure is passed to pcie_update_aspm_capable() by pcie_aspm_exit_link_state(). When pcie_aspm_exit_link_state() received a pointer to root port link, it unconfigures the root port link and frees its data structure at first. At this point, there are not links to configure under the root port and the data structure for root port link is already freed. So pcie_aspm_exit_link_state() must not call pcie_update_aspm_capable() and pcie_config_aspm_path(). This patch fixes the problem by changing pcie_aspm_exit_link_state() not to call pcie_update_aspm_capable() and pcie_config_aspm_path() if the specified link is root port link. ------------[ cut here ]------------ kernel BUG at drivers/pci/pcie/aspm.c:606! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC last sysfs file: /sys/devices/pci0000:40/0000:40:13.0/remove CPU 1 Modules linked in: shpchp Pid: 9345, comm: sysfsd Not tainted 2.6.32-rc5 #98 ProLiant DL785 G6 RIP: 0010:[<ffffffff811df69b>] [<ffffffff811df69b>] pcie_update_aspm_capable+0x15/0xbe RSP: 0018:ffff88082a2f5ca0 EFLAGS: 00010202 RAX: 0000000000000e77 RBX: ffff88182cc3e000 RCX: ffff88082a33d006 RDX: 0000000000000001 RSI: ffffffff811dff4a RDI: ffff88182cc3e000 RBP: ffff88082a2f5cc0 R08: ffff88182cc3e000 R09: 0000000000000000 R10: ffff88182fc00180 R11: ffff88182fc00198 R12: ffff88182cc3e000 R13: 0000000000000000 R14: ffff88182cc3e000 R15: ffff88082a2f5e20 FS: 00007f259a64b6f0(0000) GS:ffff880864600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00007feb53f73da0 CR3: 000000102cc94000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process sysfsd (pid: 9345, threadinfo ffff88082a2f4000, task ffff88082a33cf00) Stack: ffff88182cc3e000 ffff88182cc3e000 0000000000000000 ffff88082a33cf00 <0> ffff88082a2f5cf0 ffffffff811dff52 ffff88082a2f5cf0 ffff88082c525168 <0> ffff88402c9fd2f8 ffff88402c9fd2f8 ffff88082a2f5d20 ffffffff811d7db2 Call Trace: [<ffffffff811dff52>] pcie_aspm_exit_link_state+0xf5/0x11e [<ffffffff811d7db2>] pci_stop_bus_device+0x76/0x7e [<ffffffff811d7d67>] pci_stop_bus_device+0x2b/0x7e [<ffffffff811d7e4f>] pci_remove_bus_device+0x15/0xb9 [<ffffffff811dcb8c>] remove_callback+0x29/0x3a [<ffffffff81135aeb>] sysfs_schedule_callback_work+0x15/0x6d [<ffffffff81072790>] worker_thread+0x19d/0x298 [<ffffffff8107273b>] ? worker_thread+0x148/0x298 [<ffffffff81135ad6>] ? sysfs_schedule_callback_work+0x0/0x6d [<ffffffff810765c0>] ? autoremove_wake_function+0x0/0x38 [<ffffffff810725f3>] ? worker_thread+0x0/0x298 [<ffffffff8107629e>] kthread+0x7d/0x85 [<ffffffff8102eafa>] child_rip+0xa/0x20 [<ffffffff8102e4bc>] ? restore_args+0x0/0x30 [<ffffffff81076221>] ? kthread+0x0/0x85 [<ffffffff8102eaf0>] ? child_rip+0x0/0x20 Code: 89 e5 8a 50 48 31 c0 c0 ea 03 83 e2 07 e8 b2 de fe ff c9 48 98 c3 55 48 89 e5 41 56 49 89 fe 41 55 41 54 53 48 83 7f 10 00 74 04 <0f> 0b eb fe 48 8b 05 da 7d 63 00 4c 8d 60 e8 4c 89 e1 eb 24 4c RIP [<ffffffff811df69b>] pcie_update_aspm_capable+0x15/0xbe RSP <ffff88082a2f5ca0> ---[ end trace 6ae0f65bdeab8555 ]--- Reported-by: Alex Chiang <achiang@hp.com> Tested-by: Alex Chiang <achiang@hp.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: remove ifdefed pci_cleanup_aer_correct_error_statusAndrew Patterson2009-12-041-17/+0
| | | | | | | | The pci_cleanup_aer_correct_error_status() function has been #if 0'd out since 2.6.25. Time to remove the dead code. Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: unconditionally clear AER uncorr status register during cleanupAndrew Patterson2009-12-041-7/+3
| | | | | | | | | | | | | | | | | | | | | The current implementation of pci_cleanup_aer_uncorrect_error_status only clears either fatal or non-fatal error status bits depending on the state of the I/O channel. This implementation will then often leave some bits set after PCI error recovery completes. The uncleared bit settings will then be falsely reported the next time an AER interrupt is generated for that hierarchy. An easy way to illustrate this issue is to use the aer-inject module to simultaneously inject both an uncorrectable non-fatal and uncorrectable fatal error. One of the errors will not be cleared. This patch resolves this issue by unconditionally clearing all bits in the AER uncorrectable status register. All settings and corrective action strategies are saved and determined before pci_cleanup_aer_uncorrect_error_status is called, so this change should not affect errory handling functionality. Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: portdrv: remove redundant definitionsKenji Kaneshige2009-12-042-24/+9
| | | | | | | | Remove unnecessary definitions from portdrv.h and use generic definitions instead. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: portdrv: remove unnecessary struct pcie_port_dataKenji Kaneshige2009-12-044-26/+9
| | | | | | | | | | | | | | Remove 'port_type' field in struct pcie_port_data(), because we can get port type information from struct pci_dev. With this change, this patch also does followings: - Remove struct pcie_port_data because it no longer has any field. - Remove portdrv private definitions about port type (PCIE_RC_PORT, PCIE_SW_UPSTREAM_PORT and PCIE_SW_DOWNSTREAM_PORT), and use generic definitions instead. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: portdrv: minor cleanup for pcie_port_device_registerKenji Kaneshige2009-12-041-11/+10
| | | | | | | Minor cleanups for pcie_port_device_register(). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: portdrv: add missing irq cleanupKenji Kaneshige2009-12-041-7/+12
| | | | | | | | Add missing service irqs cleanup in the error code path of pcie_port_device_register(). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: portdrv: enable device before irq initializationKenji Kaneshige2009-12-041-10/+11
| | | | | | | | | Call pci_enable_device() before initializing service irqs, because legacy interrupt is initialized in pci_enable_device() on some architectures. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: portdrv: cleanup service irqs initializationKenji Kaneshige2009-12-041-42/+29
| | | | | | | | | | | | | | | | | | | This patch cleans up the service irqs initialization as follows: - Remove 'irq_mode' field in pcie_port_data and related definitions, which is not needed because we can get the same information from 'is_msix', 'is_msi' and 'pin' fields in struct pci_dev. - Change the name of 'vectors' argument of assign_interrupt_mode() to 'irqs' because it holds irq numbers actually. People might confuse it with CPU vector or MSI/MSI-X vector. - Change function name assign_interrupt_mode() to init_service_irqs() becasuse we no longer have 'irq_mode' data structure, and new name is more straightforward (IMO). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: portdrv: check capabilities firstKenji Kaneshige2009-12-041-2/+4
| | | | | | | | Move capability check capability to the beginning of pcie_port_device_register() prevents redundant execution path. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: portdrv: move PME capability checkKenji Kaneshige2009-12-041-3/+3
| | | | | | | | No reason to check PME capability outside get_port_device_capability(). Do it in get_port_device_capability(). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: portdrv: remove redundant pcie type calculationKenji Kaneshige2009-12-041-6/+2
| | | | | | | | PCIe port type is already stored in 'pcie_type' field of struct pci_dev. So we don't need to get it from pci configuration space. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: portdrv: cleanup pcie_device registrationKenji Kaneshige2009-12-041-51/+26
| | | | | | | | | In the current port bus driver implementation, pcie_device allocation, initialization and registration are done in separated functions. Doing those in one function make the code simple and easier to read. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: portdrv: remove redundant pcie_port_device_probeKenji Kaneshige2009-12-043-29/+8
| | | | | | | | | We don't need pcie_port_device_probe() because we can get pci device/port type using pci_is_pcie() and 'pcie_type' fields in struct pci_dev. Remove pcie_port_device_probe(). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCIe AER: use pci_is_pcie()Kenji Kaneshige2009-11-242-3/+3
| | | | | | | | Changes for PCIe AER driver to use pci_is_pcie() instead of checking pci_dev->is_pcie. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCIe ASPM: use pci_is_pcie()Kenji Kaneshige2009-11-241-9/+12
| | | | | | | | Change for PCIe ASPM driver to use pci_is_pcie() instead of checking pci_dev->is_pcie. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCIe ASPM: use pci_pcie_cap()Kenji Kaneshige2009-11-241-10/+10
| | | | | | | | | Use pci_pcie_cap() instead of pci_find_capability() to get PCIe capability offset in PCIe ASPM driver. This avoids unnecessary search in PCI configuration space. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCIe port bus: use pci_pcie_cap()Kenji Kaneshige2009-11-241-7/+7
| | | | | | | | | Use pci_pcie_cap() instead of pci_find_capability() to get PCIe capability offset in PCI Express Port Bus driver. This avoids unnecessary serarch in PCI configuration space. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCIe AER: use pci_pcie_cap()Kenji Kaneshige2009-11-242-5/+5
| | | | | | | | | Use pcie_cap() instead of pci_find_capability() to get PCIe capability offset in PCIe AER driver. This avoids unnecessary search in PCI configuration space. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: fix memory leak in aer_injectAndrew Patterson2009-11-041-1/+1
| | | | | | | | | Fixed probable typo in aer_inject cleanup code resulting in a memory leak. Acked-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: use better error return values in aer_injectAndrew Patterson2009-11-041-4/+4
| | | | | | | | | Replaced some error return values in aer_inject. Use -ENODEV when we can't find a device and -ENOTTY when the device does not support PCIe AER. Acked-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: add support for PCI domains to aer_injectAndrew Patterson2009-11-041-12/+34
| | | | | | | | Add support for PCI domains (segments) to aer_inject. Acked-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: PCIe AER: honor ACPI HEST FIRMWARE FIRST modeMatt Domsch2009-11-041-2/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Feedback from Hidetoshi Seto and Kenji Kaneshige incorporated. This correctly handles PCI-X bridges, PCIe root ports and endpoints, and prints debug messages when invalid/reserved types are found in the HEST. PCI devices not in domain/segment 0 are not represented in HEST, thus will be ignored. Today, the PCIe Advanced Error Reporting (AER) driver attaches itself to every PCIe root port for which BIOS reports it should, via ACPI _OSC. However, _OSC alone is insufficient for newer BIOSes. Part of ACPI 4.0 is the new APEI (ACPI Platform Error Interfaces) which is a way for OS and BIOS to handshake over which errors for which components each will handle. One table in ACPI 4.0 is the Hardware Error Source Table (HEST), where BIOS can define that errors for certain PCIe devices (or all devices), should be handled by BIOS ("Firmware First mode"), rather than be handled by the OS. Dell PowerEdge 11G server BIOS defines Firmware First mode in HEST, so that it may manage such errors, log them to the System Event Log, and possibly take other actions. The aer driver should honor this, and not attach itself to devices noted as such. Furthermore, Kenji Kaneshige reminded us to disallow changing the AER registers when respecting Firmware First mode. Platform firmware is expected to manage these, and if changes to them are allowed, it could break that firmware's behavior. The HEST parsing code may be replaced in the future by a more feature-rich implementation. This patch provides the minimum needed to prevent breakage until that implementation is available. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* Merge branch 'for-linus' of ↵Linus Torvalds2009-10-122-3/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: Prevent AER driver from being loaded on non-root port PCIE devices PCI: get larger bridge ranges when space is available PCI: pci.c: fix kernel-doc notation PCI quirk: TI XIO200a erroneously reports support for fast b2b transfers PCI PM: Read device power state from register after updating it PCI: remove pci_assign_resource_fixed() PCI: PCIe portdrv: remove "-driver" from driver name
| * PCI: Prevent AER driver from being loaded on non-root port PCIE devicesKenji Kaneshige2009-10-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A bug was seen on boards using a PLX 8518 switch device which advertises AER on each of it's transparent bridges. The AER driver was loaded for each bridge and this driver tried to access the AER source ID register whenever an interrupt occured on the shared PCI INTX lines. The source ID register does not exist on non root port PCIE device's which advertise AER and trying to access this register causes a unsupported request error on the bridge. Thus, when the next interrupt occurs, another error is found and the non existent source ID register is accessed again, and so it goes on. The result is a spammed dmesg with unsupported request PCI express errors on the bridge device that the AER driver is loaded against. Reported-by: Malcolm Crossley <malcolm.crossley2@gefanuc.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Tested-by: Malcolm Crossley <malcolm.crossley2@gefanuc.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: PCIe portdrv: remove "-driver" from driver nameBjorn Helgaas2009-10-061-2/+1
| | | | | | | | | | | | | | | | No need to include "-driver" in the driver name. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> CC: Tom Long Nguyen <tom.l.nguyen@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | headers: remove sched.h from interrupt.hAlexey Dobriyan2009-10-111-0/+1
|/ | | | | | | | After m68k's task_thread_info() doesn't refer to current, it's possible to remove sched.h from interrupt.h and not break m68k! Many thanks to Heiko Carstens for allowing this. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
* PCI: Disable AER with pci=nomsiAndi Kleen2009-09-171-0/+2
| | | | | | | | | | | When booting with pci=nomsi aer causes lost interrupts and lockdep inversions. So check if MSIs are not disabled before initializing the aer driver. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI ASPM: support L1 onlyKenji Kaneshige2009-09-171-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | The definition of the ASPM support field in the Link Capabilities Register had been changed by the "ASPM optionality ECN" as follows: <Before> 00b Reserved 01b L0s Supported 10b Reserved 11b L0s and L1 Supported <After> 00b No ASPM Support 01b L0s Supported 10b L1 Supported 11b L0s and L1 Supported Current linux ASPM driver doesn't enable ASPM if the support field is 00b or 10b. So there is no impact about 00b. But current linux ASPM driver doesn't enable L1 if the support field is 10b. With this patch, 10b (L1 support) is handled properly. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI / PCIe portdrv: Fix pcie_portdrv_slot_reset()Rafael J. Wysocki2009-09-141-0/+1
| | | | | | | | | | | | After commit c82f63e411f1b58427c103bd95af2863b1c96dd1 (PCI: check saved state before restore) pcie_portdrv_slot_reset() may not work correctly if dev->error_state is equal to pci_channel_io_frozen, because dev->state_saved need not be set at that time. Fix this issue by setting dev->state_saved before pci_restore_state() is called in pcie_portdrv_slot_reset(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: pcie portdrv: remove unused variableJesse Barnes2009-09-111-1/+0
| | | | | | | Remove unused port_data variable left over from the MCH hotplug quirk cleanup. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Simplify hotplug mch quirk.Eric W. Biederman2009-09-091-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | There is a very old quirk for the intel E7502 E7320 and E7525 memory controller hubs that disables usage of msi interrupts on pcie hotplug bridges of those devices, and disables changing the affinity of irqs. Today all we have to do to disable msi on a specific device is to set dev->no_msi, which is much more straightforward than the previous logic. The re-running of this fixup after pci hotplug happens below these devices is totally bogus. All of the state we change is pure software state and we don't change the hardware at all. Which means hotplug on the lower devices doesn't have a chance to change this state. So we can safely remove the special case from the pciehp driver and the pcie portdriver. I suspect the special case was someone's expermental debug code that slipped in. Certainly it isn't mentioned in commit 6fb8880a61510295aece04a542767161f624dffe aka BKrev: 41966101LJ_ogfOU0m2aE6teZfQnuQ where the code first appears. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: pcie, aer: report all error before recoveryHidetoshi Seto2009-09-092-13/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is required not to lost error records by action invoked on error recovery, such as slot reset etc. Following sample (real machine + dummy record injected by aer-inject) shows that record of 28:00.1 could not be retrieved by recovery of 28:00.0: - Before: pcieport-driver 0000:00:02.0: AER: Multiple Uncorrected (Non-Fatal) error received: id=2801 e1000e 0000:28:00.0: PCIE Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=2800(Receiver ID) e1000e 0000:28:00.0: device [8086:1096] error status/mask=00001000/00100000 e1000e 0000:28:00.0: [12] Poisoned TLP (First) e1000e 0000:28:00.0: TLP Header: 00000000 00000001 00000002 00000003 e1000e 0000:28:00.0: broadcast error_detected message e1000e 0000:28:00.0: broadcast slot_reset message e1000e 0000:28:00.0: setting latency timer to 64 e1000e 0000:28:00.0: restoring config space at offset 0x1 (was 0x100547, writing 0x100147) e1000e 0000:28:00.0: PME# disabled e1000e 0000:28:00.0: PME# disabled e1000e 0000:28:00.1: setting latency timer to 64 e1000e 0000:28:00.1: restoring config space at offset 0x1 (was 0x100547, writing 0x100147) e1000e 0000:28:00.1: PME# disabled e1000e 0000:28:00.1: PME# disabled e1000e 0000:28:00.0: broadcast resume message e1000e 0000:28:00.0: AER driver successfully recovered e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX - After: pcieport-driver 0000:00:02.0: AER: Multiple Uncorrected (Non-Fatal) error received: id=2801 e1000e 0000:28:00.0: PCIE Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=2800(Receiver ID) e1000e 0000:28:00.0: device [8086:1096] error status/mask=00001000/00100000 e1000e 0000:28:00.0: [12] Poisoned TLP (First) e1000e 0000:28:00.0: TLP Header: 00000000 00000001 00000002 00000003 e1000e 0000:28:00.1: PCIE Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=2801(Receiver ID) e1000e 0000:28:00.1: device [8086:1096] error status/mask=00081000/00100000 e1000e 0000:28:00.1: [12] Poisoned TLP (First) e1000e 0000:28:00.1: [19] ECRC e1000e 0000:28:00.1: TLP Header: 00000000 00000001 00000002 00000003 e1000e 0000:28:00.1: Error of this Agent(2801) is reported first e1000e 0000:28:00.0: broadcast error_detected message e1000e 0000:28:00.0: broadcast slot_reset message e1000e 0000:28:00.0: setting latency timer to 64 e1000e 0000:28:00.0: restoring config space at offset 0x1 (was 0x100547, writing 0x100147) e1000e 0000:28:00.0: PME# disabled e1000e 0000:28:00.0: PME# disabled e1000e 0000:28:00.1: setting latency timer to 64 e1000e 0000:28:00.1: restoring config space at offset 0x1 (was 0x100547, writing 0x100147) e1000e 0000:28:00.1: PME# disabled e1000e 0000:28:00.1: PME# disabled e1000e 0000:28:00.0: broadcast resume message e1000e 0000:28:00.0: AER driver successfully recovered e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: pcie, aer: change error print formatHidetoshi Seto2009-09-093-32/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use dev_printk like format. Sample (real machine + dummy error injected by aer-inject): - Before: +------ PCI-Express Device Error ------+ Error Severity : Corrected PCIE Bus Error type : Data Link Layer Bad TLP : Receiver ID : 2800 VendorID=8086h, DeviceID=1096h, Bus=28h, Device=00h, Function=00h +------ PCI-Express Device Error ------+ Error Severity : Corrected PCIE Bus Error type : Data Link Layer Bad TLP : Bad DLLP : Receiver ID : 2801 VendorID=8086h, DeviceID=1096h, Bus=28h, Device=00h, Function=01h Error of this Agent(2801) is reported first - After: pcieport-driver 0000:00:02.0: AER: Multiple Corrected error received: id=2801 e1000e 0000:28:00.0: PCIE Bus Error: severity=Corrected, type=Data Link Layer, id=2800(Receiver ID) e1000e 0000:28:00.0: device [8086:1096] error status/mask=00000040/00000000 e1000e 0000:28:00.0: [ 6] Bad TLP e1000e 0000:28:00.1: PCIE Bus Error: severity=Corrected, type=Data Link Layer, id=2801(Receiver ID) e1000e 0000:28:00.1: device [8086:1096] error status/mask=000000c0/00000000 e1000e 0000:28:00.1: [ 6] Bad TLP e1000e 0000:28:00.1: [ 7] Bad DLLP e1000e 0000:28:00.1: Error of this Agent(2801) is reported first Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: pcie, aer: flags to bitsHidetoshi Seto2009-09-093-17/+20
| | | | | | | Compact struct and codes. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: pcie, aer: remove unused macrosHidetoshi Seto2009-09-091-3/+0
| | | | | | | Cleanup. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: pcie, aer: report multiple/first error on a deviceHidetoshi Seto2009-09-093-5/+10
| | | | | | | | | | | | | | | Multiple bits might be set in the Uncorrectable Error Status register. But aer_print_error_source() only report a error of the lowest bit set in the error status register. So print strings for all bits unmasked and set. And check First Error Pointer to mark the error occured first. This FEP is not valid when the corresponing bit of the Uncorrectable Error Status register is not set, or unimplemented or undefined. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: pcie, aer: refer mask state in mask register properlyHidetoshi Seto2009-09-093-21/+17
| | | | | | | | | | | | | | | | | | | | ERR_{,UN}CORRECTABLE_ERROR_MASK are set of error bits which linux know, set of PCI_ERR_COR_* and PCI_ERR_UNC_* defined in linux/pci_regs.h. This masks make aerdrv not to report errors of unknown bit, while aerdrv have ability to report such undefined errors as "Unknown Error Bit %2d". OTOH aerdrv_errprint does not have any check of setting in mask register. So it could report masked wrong error by finding bit in status without knowing that the bit is masked in the mask register. This patch changes aerdrv to use mask state in mask register propely instead of defined/hardcoded ERR_{,UN}CORRECTABLE_ERROR_MASK. This change prevents aerdrv from reporting masked error, and also enable reporting unknown errors. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: pcie, aer: remove spinlock in aerdrv_errprint.cHidetoshi Seto2009-09-091-20/+8
| | | | | | | | | | | The static buffer errmsg_buff[] is used only for building error message in fixed format, and is protected by a spinlock. This patch removes this buffer and the spinlock. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: pcie, aer: fix report of multiple errorsHidetoshi Seto2009-09-091-11/+8
| | | | | | | | | | | | | | The flag AER_MULTI_ERROR_VALID_FLAG in info->flag does mean that the root port receives multiple error messages. Error messages can be posted from different devices, so it does not mean that each reported device has multiple errors. If there are multiple error devices and the root port has valid error source ID, it would be nice to report which device is the error source reported first. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: pcie, aer: init struct aer_err_info for reuseHidetoshi Seto2009-09-091-0/+3
| | | | | | | | | | | In case of multiple errors, struct aer_err_info would be reused among all reported devices. So the info->status should be initialized before recycled. Otherwise error of one device might be reported as the error of another device. Also info->flags has similar problem on reporting TLP header. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: pcie, aer: rework MASK macros in aerdrv_errprint.cHidetoshi Seto2009-09-091-25/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Definitions of MASK macros in aerdrv_errprint.c are tricky and unsafe. For example, AER_AGENT_TRANSMITTER_MASK(_sev, _stat) does work like: static inline func(int _sev, int _stat) { if (_sev == AER_CORRECTABLE) return (_stat & (PCI_ERR_COR_REP_ROLL|PCI_ERR_COR_REP_TIMER)); else return (_stat & PCI_ERR_COR_REP_ROLL); } In case of else path here, for uncorrectable errors, testing bits in _stat by PCI_ERR_COR_* does not make sense because _stat should have only PCI_ERR_UNC_* bits originated in uncorrectable error status register. But at this time this is safe because uncorrectable error using bit position same to PCI_ERR_COR_REP_ROLL(= bit position 8) is not defined. Likewise, AER_AGENT_COMPLETER_MASK is always PCI_ERR_UNC_COMP_ABORT but it works because bit 15 of correctable error status is not defined. It means that these MASK macros will turn to be wrong once if new error is defined. (In fact, bit 15 of correctable is now defined in PCIe 2.1) This patch changes these MASK macros to be more strict, not to return PCI_ERR_COR_* bits for uncorrectable error status and vise versa. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: pcie, aer: AER_PR for printing in aerdrv_errprint.cHidetoshi Seto2009-09-091-19/+15
| | | | | | | | | | | | | Add workaround macro to reduce the number of checkpatch warning: WARNING: printk() should include KERN_ facility level Before: total: 0 errors, 10 warnings, 247 lines checked After: total: 0 errors, 1 warnings, 243 lines checked Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: pcie, aer: checkpatch style cleanup in pcie/aer/*Hidetoshi Seto2009-09-095-71/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before: drivers/pci/pcie/aer/aer_inject.c total: 4 errors, 4 warnings, 473 lines checked drivers/pci/pcie/aer/aerdrv.c total: 5 errors, 2 warnings, 333 lines checked drivers/pci/pcie/aer/aerdrv.h total: 1 errors, 0 warnings, 139 lines checked drivers/pci/pcie/aer/aerdrv_core.c total: 4 errors, 3 warnings, 872 lines checked drivers/pci/pcie/aer/aerdrv_errprint.c total: 12 errors, 11 warnings, 248 lines checked After: drivers/pci/pcie/aer/aer_inject.c total: 0 errors, 0 warnings, 466 lines checked drivers/pci/pcie/aer/aerdrv.c total: 0 errors, 0 warnings, 335 lines checked drivers/pci/pcie/aer/aerdrv.h total: 0 errors, 0 warnings, 139 lines checked drivers/pci/pcie/aer/aerdrv_core.c total: 0 errors, 0 warnings, 869 lines checked drivers/pci/pcie/aer/aerdrv_errprint.c total: 0 errors, 10 warnings, 247 lines checked Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI ASPM: support per direction l0s managementKenji Kaneshige2009-09-091-63/+107
| | | | | | | | | | | | | | | | | | | | | The L0s state can be managed separately for each direction (upstream direction and downstream direction) of the link. But in the current implementation, those are mixed up. With this patch, L0s for each direction are managed separately. To maintain three states (upstream direction L0s, downstream L0s and L1), 'aspm_support', 'aspm_enabled', 'aspm_capable', 'aspm_disable' and 'aspm_default' fields in struct pcie_link_state are changed to 3-bit from 2-bit. The 'latency' field is separated to two 'latency_up' and 'latency_dw' fields to maintain exit latencies for each direction of the link. For L0, 'latency_up.l0' and 'latency_dw.l0' are used to configure upstream direction L0s and downstream direction L0s respectively. For L1, larger value of 'latency_up.l1' and 'latency_dw.l1' is considered as L1 exit latency. Acked-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI ASPM: support partial aspm enablementKenji Kaneshige2009-09-091-164/+47
| | | | | | | | | | | | | | | | | | In the current implementation, ASPM L0s/L1 is disabled for all links in the hierarchy if one of the link doesn't meet latency requirement. But we can partially enable ASPM L0s/L1 on sub-tree in the hierarchy. This patch allows partial L0s/L1 enablement in the hierarchy. And it also reduce the calculation cost of ASPM configuration very much. In the previous implementation, all links were enabled with the same state. With this patch, enabled state for each link is determined simply as follows (the 'requested' is from policy_to_aspm_state()). enabled = requested & (link->aspm_capable & link->aspm_disable) Acked-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI ASPM: introduce capable flagKenji Kaneshige2009-09-091-31/+86
| | | | | | | | | | | | | | | | | | | Introduce 'aspm_capable' field to maintain the capable ASPM setting of the link. By the 'aspm_capable', we don't need to recheck latency every time ASPM policy is changed. Each bit in 'aspm_capable' is associated to ASPM state (L0S/L1). The bit is set if the associated ASPM state is supported by the link and it satisfies the latency requirement (i.e. exit latency < endpoint acceptable latency). The 'aspm_capable' is updated when - an endpoint device is added (boot time or hot-plug time) - an endpoint device is removed (hot-unplug time) - PCI power state is changed. Acked-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI ASPM: introduce disable flagKenji Kaneshige2009-09-091-17/+24
| | | | | | | | | Introduce 'aspm_disable' flag to manage disabled ASPM state more robust way. Acked-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI ASPM: fix possible null pointer dereferenceKenji Kaneshige2009-09-091-8/+9
| | | | | | | | | Fix possible NULL dereference in pcie_aspm_exit_link_state(). This patch also cleanup some code. Acked-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
OpenPOWER on IntegriCloud