summaryrefslogtreecommitdiffstats
path: root/drivers/pci/pci.h
Commit message (Collapse)AuthorAgeFilesLines
* PCI: Simplify hotplug mch quirk.Eric W. Biederman2009-09-091-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | There is a very old quirk for the intel E7502 E7320 and E7525 memory controller hubs that disables usage of msi interrupts on pcie hotplug bridges of those devices, and disables changing the affinity of irqs. Today all we have to do to disable msi on a specific device is to set dev->no_msi, which is much more straightforward than the previous logic. The re-running of this fixup after pci hotplug happens below these devices is totally bogus. All of the state we change is pure software state and we don't change the hardware at all. Which means hotplug on the lower devices doesn't have a chance to change this state. So we can safely remove the special case from the pciehp driver and the pcie portdriver. I suspect the special case was someone's expermental debug code that slipped in. Certainly it isn't mentioned in commit 6fb8880a61510295aece04a542767161f624dffe aka BKrev: 41966101LJ_ogfOU0m2aE6teZfQnuQ where the code first appears. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: expose function reset capability in sysfsMichael S. Tsirkin2009-09-091-0/+1
| | | | | | | | | | | | | | Some devices allow an individual function to be reset without affecting other functions in the same device: that's what pci_reset_function does. For devices that have this support, expose reset attribite in sysfs. This is useful e.g. for virtualization, where a qemu userspace process wants to reset the device when the guest is reset, to emulate machine reboot as closely as possible. Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI SR-IOV: correct broken resource alignment calculationsChris Wright2009-08-301-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | An SR-IOV capable device includes an SR-IOV PCIe capability which describes the Virtual Function (VF) BAR requirements. A typical SR-IOV device can support multiple VFs whose BARs must be in a contiguous region, effectively an array of VF BARs. The BAR reports the size requirement for a single VF. We calculate the full range needed by simply multiplying the VF BAR size with the number of possible VFs and create a resource spanning the full range. This all seems sane enough except it artificially inflates the alignment requirement for the VF BAR. The VF BAR need only be aligned to the size of a single BAR not the contiguous range of VF BARs. This can cause us to fail to allocate resources for the BAR despite the fact that we actually have enough space. This patch adds a thin PCI specific layer over the generic resource_alignment() function which is aware of the special nature of VF BARs and does sorting and allocation based on the smaller alignment requirement. I recognize that while resource_alignment is generic, it's basically a PCI helper. An alternative to this patch is to add PCI VF BAR specific information to struct resource. I opted for the extra layer rather than adding such PCI specific information to struct resource. This does have the slight downside that we don't cache the BAR size and re-read for each alignment query (happens a small handful of times during boot for each VF BAR). Signed-off-by: Chris Wright <chrisw@sous-sol.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Yu Zhao <yu.zhao@intel.com> Cc: stable@kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: handle Virtual Function ATS enablingYu Zhao2009-05-181-1/+3
| | | | | | | | | | | The SR-IOV spec requires that the Smallest Translation Unit and the Invalidate Queue Depth fields in the Virtual Function ATS capability are hardwired to 0. If a function is a Virtual Function, then and set its Physical Function's STU before enabling the ATS. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* PCI: support the ATS capabilityYu Zhao2009-05-181-0/+37
| | | | | | | | | | | The PCIe ATS capability makes the Endpoint be able to request the DMA address translation from the IOMMU and cache the translation in the device side, thus alleviate IOMMU pressure and improve the hardware performance in the I/O virtualization environment. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* Merge branch 'linux-next' of ↵Linus Torvalds2009-04-011-0/+65
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (88 commits) PCI: fix HT MSI mapping fix PCI: don't enable too much HT MSI mapping x86/PCI: make pci=lastbus=255 work when acpi is on PCI: save and restore PCIe 2.0 registers PCI: update fakephp for bus_id removal PCI: fix kernel oops on bridge removal PCI: fix conflict between SR-IOV and config space sizing powerpc/PCI: include pci.h in powerpc MSI implementation PCI Hotplug: schedule fakephp for feature removal PCI Hotplug: rename legacy_fakephp to fakephp PCI Hotplug: restore fakephp interface with complete reimplementation PCI: Introduce /sys/bus/pci/devices/.../rescan PCI: Introduce /sys/bus/pci/devices/.../remove PCI: Introduce /sys/bus/pci/rescan PCI: Introduce pci_rescan_bus() PCI: do not enable bridges more than once PCI: do not initialize bridges more than once PCI: always scan child buses PCI: pci_scan_slot() returns newly found devices PCI: don't scan existing devices ... Fix trivial append-only conflict in Documentation/feature-removal-schedule.txt
| * PCI: Introduce /sys/bus/pci/rescanAlex Chiang2009-03-201-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This interface allows the user to force a rescan of all PCI buses in system, and rediscover devices that have been removed earlier. pci_bus_attrs implementation from Trent Piepho. Thanks to Vegard Nossum for discovering locking issues with the sysfs interface. Cc: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: handle SR-IOV Virtual Function MigrationYu Zhao2009-03-201-0/+4
| | | | | | | | | | | | | | | | | | Add or remove a Virtual Function after receiving a Migrate In or Out Request. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: add SR-IOV API for Physical Function driverYu Zhao2009-03-201-0/+2
| | | | | | | | | | | | | | | | | | | | Add or remove the Virtual Function when the SR-IOV is enabled or disabled by the device driver. This can happen anytime rather than only at the device probe stage. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: centralize device setup codeYu Zhao2009-03-201-0/+1
| | | | | | | | | | | | | | | | | | Move the device setup stuff into pci_setup_device() which will be used to setup the Virtual Function later. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: reserve bus range for SR-IOV deviceYu Zhao2009-03-201-0/+5
| | | | | | | | | | | | | | | | | | Reserve the bus number range used by the Virtual Function when pcibios_assign_all_busses() returns true. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: restore saved SR-IOV stateYu Zhao2009-03-201-0/+4
| | | | | | | | | | | | | | | | | | Restore the volatile registers in the SR-IOV capability after the D3->D0 transition. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: initialize and release SR-IOV capabilityYu Zhao2009-03-201-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | If a device has the SR-IOV capability, initialize it (set the ARI Capable Hierarchy in the lowest numbered PF if necessary; calculate the System Page Size for the VF MMIO, probe the VF Offset, Stride and BARs). A lock for the VF bus allocation is also initialized if a PF is the lowest numbered PF. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: allow assignment of memory resources with a specified alignmentYuji Shimada2009-03-201-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch allows memory resources to be assigned with a specified alignment at boot-time or run-time. The patch is useful when we use PCI pass-through, because page-aligned memory resources are required to securely share PCI resources with guest drivers. If you want to assign the resource at boot time, please set "pci=resource_alignment=" boot parameter. This is format of "pci=resource_alignment=" boot parameter: [<order of align>@][<domain>:]<bus>:<slot>.<func>[; ...] Specifies alignment and device to reassign aligned memory resources. If <order of align> is not specified, PAGE_SIZE is used as alignment. PCI-PCI bridge can be specified, if resource windows need to be expanded. This is example: pci=resource_alignment=20@07:00.0;18@0f:00.0;00:1d.7 If you want to assign the resource at run-time, please set "/sys/bus/pci/resource_alignment" file, and hot-remove the device and hot-add the device. For this purpose, fakephp or PCI hotplug interfaces can be used. The format of "/sys/bus/pci/resource_alignment" file is the same with boot parameter. You can use "," instead of ";". For example: # cd /sys/bus/pci # echo -n 20@12:00.0 > resource_alignment # echo 1 > devices/0000:12:00.0/remove # echo 1 > rescan Reviewed-by: Alex Chiang <achiang@hp.com> Reviewed-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Yuji Shimada <shimada-yxb@necst.nec.co.jp> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | PCI PM: Move pci_restore_standard_config to pci-driver.cRafael J. Wysocki2009-03-301-1/+0
|/ | | | | | | | | Move pci_restore_standard_config() from pci.c to pci-driver.c and make it static. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: fix struct pci_platform_pm_ops kernel-docRandy Dunlap2009-02-131-10/+10
| | | | | | | Fix struct pci_platform_pm_ops kernel-doc notation. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI PM: Restore standard config registers of all devices earlyRafael J. Wysocki2009-01-161-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | There is a problem in our handling of suspend-resume of PCI devices that many of them have their standard config registers restored with interrupts enabled and they are put into the full power state with interrupts enabled as well. This may lead to the following scenario: * an interrupt vector is shared between two or more devices * one device is resumed earlier and generates an interrupt * the interrupt handler of another device tries to handle it and attempts to access the device the config space of which hasn't been restored yet and/or which still is in a low power state * the system crashes as a result To prevent this from happening we should restore the standard configuration registers of all devices with interrupts disabled and we should put them into the D0 power state right after that. Unfortunately, this cannot be done using the existing pci_set_power_state(), because it can sleep. Also, to do it we have to make sure that the config spaces of all devices were actually saved during suspend. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI PM: Avoid touching devices behind bridges in unknown stateRafael J. Wysocki2009-01-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | It generally is better to avoid accessing devices behind bridges that may not be in the D0 power state, because in that case the bridges' secondary buses may not be accessible. For this reason, during the early phase of resume (ie. with interrupts disabled), before restoring the standard config registers of a device, check the power state of the bridge the device is behind and postpone the restoration of the device's config space, as well as any other operations that would involve accessing the device, if that state is not D0. In such cases the restoration of the device's config space will be retried during the "normal" phase of resume (ie. with interrupts enabled), so that the bridge can be put into D0 before that happens. Also, save standard configuration registers of PCI devices during the "normal" phase of suspend (ie. with interrupts enabled), so that the bridges the devices are behind can be put into low power states (we don't put bridges into low power states at the moment, but we may want to do it in the future and it seems reasonable to design for that). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI PM: Add suspend counterpart of pci_reenable_deviceRafael J. Wysocki2009-01-071-0/+1
| | | | | | | | | | | | | | | | | PCI devices without drivers are not disabled during suspend and hibernation, but they are enabled during resume, with the help of pci_reenable_device(), so there is an unbalanced execution of pcibios_enable_device() in the resume code path. To correct this introduce function pci_disable_enabled_device() that will disable the argument device, if it is enabled when the function is being run, without updating the device's pci_dev structure and use it in the suspend code path to balance the pci_reenable_device() executed during resume. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: revise VPD access interfaceStephen Hemminger2009-01-071-3/+3
| | | | | | | | | | | Change PCI VPD API which was only used by sysfs to something usable in drivers. * move iteration over multiple words to the low level * use conventional types for arguments * add exportable wrapper Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: set device wakeup capable flag if platform support is presentJesse Barnes2009-01-071-0/+1
| | | | | | | | | | | | | When PCI devices are initialized, we check whether they support PCI PM caps and set the device can_wakeup flag if so. However, some devices may have platform provided wakeup events rather than PCI PME signals, so we need to set can_wakeup in that case too. Doing so should allow wakeups from many more devices, especially on cost constrained systems. Reported-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Joseph Chan <JosephChan@via.com.tw> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: factor pci_bus_add_child() from pci_bus_add_devices()Yu Zhao2009-01-071-0/+1
| | | | | | | | | This patch splits a new function, pci_bus_add_child(), from pci_bus_add_devices(). The new function can be used to register PCI buses to the device core. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: add a new function to map BAR offsetsYu Zhao2009-01-071-0/+2
| | | | | | | | Add a function to map a given resource number to a corresponding register so drivers can get the offset and type of device specific BARs. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: export __pci_read_base()Yu Zhao2009-01-071-0/+9
| | | | | | | Export __pci_read_base() so it can be used by whole PCI subsystem. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: enhance pci_ari_enabled()Yu Zhao2009-01-071-3/+3
| | | | | | | | | | | Change parameter of pci_ari_enabled() from 'pci_dev' to 'pci_bus'. ARI forwarding on the bridge mostly concerns the subordinate devices rather than the bridge itself. So this change will make the function easier to use. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: handle PCI state saving with interrupts disabledRafael J. Wysocki2009-01-071-0/+1
| | | | | | | | | | Since interrupts will soon be disabled at PCI resume time, we need to pre-allocate memory to save/restore PCI config space (or use GFP_ATOMIC, but this is safer). Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* ACPI/PCI: PCI MSI _OSC support capabilities called when root bridge addedAndrew Patterson2009-01-071-2/+0
| | | | | | | | | | The _OSC capability OSC_MSI_SUPPORT is set when the root bridge is added with pci_acpi_osc_support(), so we no longer need to do it in the PCI MSI driver. Also adds the function pci_msi_enabled, which returns true if pci=nomsi is not on the kernel command-line. Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: check mmap range of /proc/bus/pci files tooJesse Barnes2009-01-071-0/+4
| | | | | | | | /proc/bus/pci allows you to mmap resource ranges too, so we should probably be checking to make sure the mapping is somewhat valid. Uses the same code as the recent sysfs mmap range checking patch from Linus. Acked-by: David Miller <davem@davemloft.net> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* ACPI/PCI: Set support bit for MSI in support field of _OSCTaku Izumi2008-10-221-0/+2
| | | | | | | | | Currently linux doesn't have any code to set the "MSI supported" bit in Support Fireld of _OSC. This patch adds the code for that. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Add ability to mmap legacy_io on some platformsBenjamin Herrenschmidt2008-10-201-0/+6
| | | | | | | | | | | | | | This adds the ability to mmap legacy IO space to the legacy_io files in sysfs on platforms that support it. This will allow to clean up X to use this instead of /dev/mem for legacy IO accesses such as those performed by Int10. While at it I moved pci_create/remove_legacy_files() to pci-sysfs.c where I think they belong, thus making more things statis in there and cleaned up some spurrious prototypes in the ia64 pci.h file Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: support PCIe ARI capabilityYu Zhao2008-10-201-0/+12
| | | | | | | | | | | | This patch adds support for PCI Express Alternative Routing-ID Interpretation (ARI) capability. The ARI capability extends the Function Number field of the PCI Express Endpoint by reusing the Device Number which is otherwise hardwired to 0. With ARI, an Endpoint can have up to 256 functions. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: replace cfg space size (256/4096) by macros.Zhao, Yu2008-10-201-0/+7
| | | | | | | | | | This is a cleanup that changes all PCI configuration space size representations to the macros (PCI_CFG_SPACE_SIZE and PCI_CFG_SPACE_EXP_SIZE). And the macros are also moved from drivers/pci/probe.c to drivers/pci/pci.h. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: make CPU list affinity visibleMike Travis2008-10-201-0/+1
| | | | | | | | | | | | | Stephen Hemminger wrote: > Looks like Mike created cpulistaffinty in sysfs but never completed > the job. This patch hooks things up correctly, taking care to remove the new file when the bus is destroyed. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* Merge branch 'linux-next' of ↵Linus Torvalds2008-07-161-4/+43
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (72 commits) Revert "x86/PCI: ACPI based PCI gap calculation" PCI: remove unnecessary volatile in PCIe hotplug struct controller x86/PCI: ACPI based PCI gap calculation PCI: include linux/pm_wakeup.h for device_set_wakeup_capable PCI PM: Fix pci_prepare_to_sleep x86/PCI: Fix PCI config space for domains > 0 Fix acpi_pm_device_sleep_wake() by providing a stub for CONFIG_PM_SLEEP=n PCI: Simplify PCI device PM code PCI PM: Introduce pci_prepare_to_sleep and pci_back_from_sleep PCI ACPI: Rework PCI handling of wake-up ACPI: Introduce new device wakeup flag 'prepared' ACPI: Introduce acpi_device_sleep_wake function PCI: rework pci_set_power_state function to call platform first PCI: Introduce platform_pci_power_manageable function ACPI: Introduce acpi_bus_power_manageable function PCI: make pci_name use dev_name PCI: handle pci_name() being const PCI: add stub for pci_set_consistent_dma_mask() PCI: remove unused arch pcibios_update_resource() functions PCI: fix pci_setup_device()'s sprinting into a const buffer ... Fixed up conflicts in various files (arch/x86/kernel/setup_64.c, arch/x86/pci/irq.c, arch/x86/pci/pci.h, drivers/acpi/sleep/main.c, drivers/pci/pci.c, drivers/pci/pci.h, include/acpi/acpi_bus.h) from x86 and ACPI updates manually.
| * PCI ACPI: Rework PCI handling of wake-upRafael J. Wysocki2008-07-071-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Introduce function acpi_pm_device_sleep_wake() for enabling and disabling the system wake-up capability of devices that are power manageable by ACPI. * Introduce function acpi_bus_can_wakeup() allowing other (dependent) subsystems to check if ACPI is able to enable the system wake-up capability of given device. * Introduce callback .sleep_wake() in struct pci_platform_pm_ops and for the ACPI PCI 'driver' make it use acpi_pm_device_sleep_wake(). * Introduce callback .can_wakeup() in struct pci_platform_pm_ops and for the ACPI 'driver' make it use acpi_bus_can_wakeup(). * Move the PME# handlig code out of pci_enable_wake() and split it into two functions, pci_pme_capable() and pci_pme_active(), allowing the caller to check if given device is capable of generating PME# from given power state and to enable/disable the device's PME# functionality, respectively. * Modify pci_enable_wake() to use the new ACPI callbacks and the new PME#-related functions. * Drop the generic .platform_enable_wakeup() callback that is not used any more. * Introduce device_set_wakeup_capable() that will set the power.can_wakeup flag of given device. * Rework PCI device PM initialization so that, if given device is capable of generating wake-up events, either natively through the PME# mechanism, or with the help of the platform, its power.can_wakeup flag is set and its power.should_wakeup flag is unset as appropriate. * Make ACPI set the power.can_wakeup flag for devices found to be wake-up capable by it. * Make the ACPI wake-up code enable/disable GPEs for devices that have the wakeup.flags.prepared flag set (which means that their wake-up power has been enabled). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: Introduce platform_pci_power_manageable functionRafael J. Wysocki2008-07-071-4/+22
| | | | | | | | | | | | | | | | | | | | | | Introduce function pointer platform_pci_power_manageable to be used by the platform-related code to point to a function allowing us to check if given device is power manageable by the platform. Introduce acpi_pci_power_manageable() playing that role for ACPI. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * Merge branch 'suspend' of ↵Jesse Barnes2008-06-121-2/+1
| |\ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 into linux-next
| | * PCI ACPI: Drop the second argument of platform_pci_choose_stateRafael J. Wysocki2008-06-111-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Since the second argument of acpi_pci_choose_state() and platform_pci_choose_state() is never used, remove it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Len Brown <len.brown@intel.com>
| * | PCI: introduce pci_slotAlex Chiang2008-06-101-0/+13
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, /sys/bus/pci/slots/ only exposes hotplug attributes when a hotplug driver is loaded, but PCI slots have attributes such as address, speed, width, etc. that are not related to hotplug at all. Introduce pci_slot as the primary data structure and kobject model. Hotplug attributes described in hotplug_slot become a secondary structure associated with the pci_slot. This patch only creates the infrastructure that allows the separation of PCI slot attributes and hotplug attributes. In this patch, the PCI hotplug core remains the only user of this infrastructure, and thus, /sys/bus/pci/slots/ will still only become populated when a hotplug driver is loaded. A later patch in this series will add a second user of this new infrastructure and demonstrate splitting the task of exposing pci_slot attributes from hotplug_slot attributes. - Make pci_slot the primary sysfs entity. hotplug_slot becomes a subsidiary structure. o pci_create_slot() creates and registers a slot with the PCI core o pci_slot_add_hotplug() gives it hotplug capability - Change the prototype of pci_hp_register() to take the bus and slot number (on parent bus) as parameters. - Remove all the ->get_address methods since this functionality is now handled by pci_slot directly. [achiang@hp.com: rpaphp-correctly-pci_hp_register-for-empty-pci-slots] Tested-by: Badari Pulavarty <pbadari@us.ibm.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: make headers_check happy] [akpm@linux-foundation.org: nuther build fix] [akpm@linux-foundation.org: fix typo in #include] Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Matthew Wilcox <matthew@wil.cx> Cc: Greg KH <greg@kroah.com> Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Cc: Len Brown <lenb@kernel.org> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | PCI ACPI: Drop the second argument of platform_pci_choose_stateRafael J. Wysocki2008-07-161-2/+1
| | | | | | | | | | | | | | | | | | | | Since the second argument of acpi_pci_choose_state() and platform_pci_choose_state() is never used, remove it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Len Brown <len.brown@intel.com>
* | PCI: Limit VPD read/write lengths for Broadcom 5706, 5708, 5709 rev.Benjamin Li2008-07-021-1/+1
|/ | | | | | | | | | | | | | | | | | | | For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the VPD end tag will hang the device. This problem was initially observed when a vpd entry was created in sysfs ('/sys/bus/pci/devices/<id>/vpd'). A read to this sysfs entry will dump 32k of data. Reading a full 32k will cause an access beyond the VPD end tag causing the device to hang. Once the device is hung, the bnx2 driver will not be able to reset the device. We believe that it is legal to read beyond the end tag and therefore the solution is to limit the read/write length. A majority of this patch is from Matthew Wilcox who gave code for reworking the PCI vpd size information. A PCI quirk added for the Broadcom NIC's to limit the read/write's. Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Expose PCI VPD through sysfsBen Hutchings2008-04-201-0/+19
| | | | | | | | | | | | | | | | | | | | | Vital Product Data (VPD) may be exposed by PCI devices in several ways. It is generally unsafe to read this information through the existing interfaces to user-land because of stateful interfaces. This adds: - abstract operations for VPD access (struct pci_vpd_ops) - VPD state information in struct pci_dev (struct pci_vpd) - an implementation of the VPD access method specified in PCI 2.2 (in access.c) - a 'vpd' binary file in sysfs directories for PCI devices with VPD operations defined It adds a probe for PCI 2.2 VPD in pci_scan_device() and release of VPD state in pci_release_dev(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: make pci_bus a struct deviceGreg Kroah-Hartman2008-02-011-1/+1
| | | | | | | | | | | | | | This moves the pci_bus class device to be a real struct device and at the same time, place it in the device tree in the correct location. Note, the old "bridge" symlink is now gone, but this was a non-standard link and no userspace program used it. If you need to determine the device that the bus is on, follow the standard device symlink, or walk up the device tree. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: fix codingstyle issues in drivers/pci/pci.hGreg Kroah-Hartman2008-02-011-3/+5
| | | | | | Fixes a few coding style issues in the internal pci.h file Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: export pci_restore_msi_state()Linas Vepstas2008-02-011-6/+0
| | | | | | | | | | | | | | | PCI error recovery usually involves the PCI adapter being reset. If the device is using MSI, the reset will cause the MSI state to be lost; the device driver needs to restore the MSI state. The pci_restore_msi_state() routine is currently protected by CONFIG_PM; remove this, and also export the symbol, so that it can be used in a modle. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Intel IOMMU: PCI generic helper functionKeshavamurthy, Anil S2007-10-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | When devices are under a p2p bridge, upstream transactions get replaced by the device id of the bridge as it owns the PCIE transaction. Hence its necessary to setup translations on behalf of the bridge as well. Due to this limitation all devices under a p2p share the same domain in a DMAR. We just cache the type of device, if its a native PCIe device or not for later use. [akpm@linux-foundation.org: BUG_ON -> WARN_ON+recover] Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Ashok Raj <ashok.raj@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Christoph Lameter <clameter@sgi.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds2007-10-121-0/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (37 commits) PCI: merge almost all of pci_32.h and pci_64.h together PCI: X86: Introduce and enable PCI domain support PCI: Add 'nodomains' boot option, and pci_domains_supported global PCI: modify PCI bridge control ISA flag for clarity PCI: use _CRS for PCI resource allocation PCI: avoid P2P prefetch window for expansion ROMs PCI: skip ISA ioresource alignment on some systems PCI: remove transparent bridge sizing pci: write file size to inode on proc bus file write pci: use size stored in proc_dir_entry for proc bus files pci: implement "pci=noaer" PCI: fix IDE legacy mode resources MSI: Use correct data offset for 32-bit MSI in read_msi_msg() PCI: Fix incorrect argument order to list_add_tail() in PCI dynamic ID code PCI: i386: Compaq EVO N800c needs PCI bus renumbering PCI: Remove no longer correct documentation regarding MSI vector assignment PCI: re-enable onboard sound on "MSI K8T Neo2-FIR" PCI: quirk_vt82c586_acpi: Omit reading PCI revision ID PCI: quirk amd_8131_mmrbc: Omit reading pci revision ID cpqphp: Use PCI_CLASS_REVISION instead of PCI_REVISION_ID for read ...
| * pci: implement "pci=noaer"Randy Dunlap2007-10-121-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | For cases in which CONFIG_PCIEAER=y (such as distro kernels), allow users to disable PCIE Advanced Error Reporting by using "pci=noaer" on the kernel command line. This can be used to work around hardware or (kernel) software problems. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | Driver core: change add_uevent_var to use a structKay Sievers2007-10-121-2/+1
|/ | | | | | | | | | | | | | | | | | This changes the uevent buffer functions to use a struct instead of a long list of parameters. It does no longer require the caller to do the proper buffer termination and size accounting, which is currently wrong in some places. It fixes a known bug where parts of the uevent environment are overwritten because of wrong index calculations. Many thanks to Mathieu Desnoyers for finding bugs and improving the error handling. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: Move prototypes for pci_bus_find_capability to include/linux/pci.hKumar Gala2007-08-221-7/+1
| | | | | | | | | | | We need pci_bus_find_capability() in some arch/powerpc code so move the prototype into a header accessible to it. Also kill the duplicate prototype for pci_bus_alloc_resource(). Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
OpenPOWER on IntegriCloud