summaryrefslogtreecommitdiffstats
path: root/drivers/pci/pci-driver.c
Commit message (Collapse)AuthorAgeFilesLines
* Merge branch 'linux-next' of ↵Linus Torvalds2009-09-161-55/+77
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (75 commits) PCI hotplug: clean up acpi_run_hpp() PCI hotplug: acpiphp: use generic pci_configure_slot() PCI hotplug: shpchp: use generic pci_configure_slot() PCI hotplug: pciehp: use generic pci_configure_slot() PCI hotplug: add pci_configure_slot() PCI hotplug: clean up acpi_get_hp_params_from_firmware() interface PCI hotplug: acpiphp: don't cache hotplug_params in acpiphp_bridge PCI hotplug: acpiphp: remove superfluous _HPP/_HPX evaluation PCI: Clear saved_state after the state has been restored PCI PM: Return error codes from pci_pm_resume() PCI: use dev_printk in quirk messages PCI / PCIe portdrv: Fix pcie_portdrv_slot_reset() PCI Hotplug: convert acpi_pci_detect_ejectable() to take an acpi_handle PCI Hotplug: acpiphp: find bridges the easy way PCI: pcie portdrv: remove unused variable PCI / ACPI PM: Propagate wake-up enable for devices w/o ACPI support ACPI PM: Replace wakeup.prepared with reference counter PCI PM: Introduce device flag wakeup_prepared PCI / ACPI PM: Rework some debug messages PCI PM: Simplify PCI wake-up code ... Fixed up conflict in arch/powerpc/kernel/pci_64.c due to OF device tree scanning having been moved and merged for the 32- and 64-bit cases. The 'needs_freset' initialization added in 6e19314cc ("PCI/powerpc: support PCIe fundamental reset") is now in arch/powerpc/kernel/pci_of_scan.c.
| * PCI: Clear saved_state after the state has been restoredRafael J. Wysocki2009-09-141-9/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some PCI devices fail if their standard configuration registers are restored twice in a row. Prevent this from happening by making pci_restore_state() clear the saved_state flag of the device right after the device's standard configuration registers have been populated with the previously saved values. Simplify PCI PM callbacks by removing the direct clearing of state_saved from them, as it shouldn't be necessary any more (except in pci_pm_thaw(), where it has to be cleared, so that the values saved during the "freeze" phase of hibernation are not used later by mistake). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI PM: Return error codes from pci_pm_resume()Rafael J. Wysocki2009-09-141-1/+1
| | | | | | | | | | | | | | | | | | Currently pci_pm_resume() always returns 0, which makes the error variable defined in there a bit pointless. Make pci_pm_resume() return error codes obtained from drivers' callbacks. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: separate out pci_add_dynid()Tejun Heo2009-09-091-45/+74
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Separate out pci_add_dynid() from store_new_id() and export it so that in-kernel code can add PCI IDs dynamically. As the function will be available regardless of HOTPLUG, put it and pull pci_free_dynids() outside of CONFIG_HOTPLUG. This will be used by pci-stub to initialize initial IDs via module param. While at it, remove bogus get_driver() failure check. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Reviewed-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | Merge commit 'v2.6.31-rc8' into nextDmitry Torokhov2009-08-271-1/+1
|\ \ | |/
| * PCI: check saved state before restoreAlek Du2009-08-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Without the check, the config space may be filled with zeros. Though the driver should try to avoid call restoring before saving, but the pci layer also should check this. Also removes the existing check in pci_restore_standard_config, since it's superfluous with the new check in restore_state. Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Alek Du <alek.du@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | Driver Core: Make PM operations a const pointerDmitry Torokhov2009-07-241-8/+8
|/ | | | | | | | They are not supposed to be modified by drivers, so make them const. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumaskLinus Torvalds2009-04-051-2/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask: (36 commits) cpumask: remove cpumask allocation from idle_balance, fix numa, cpumask: move numa_node_id default implementation to topology.h, fix cpumask: remove cpumask allocation from idle_balance x86: cpumask: x86 mmio-mod.c use cpumask_var_t for downed_cpus x86: cpumask: update 32-bit APM not to mug current->cpus_allowed x86: microcode: cleanup x86: cpumask: use work_on_cpu in arch/x86/kernel/microcode_core.c cpumask: fix CONFIG_CPUMASK_OFFSTACK=y cpu hotunplug crash numa, cpumask: move numa_node_id default implementation to topology.h cpumask: convert node_to_cpumask_map[] to cpumask_var_t cpumask: remove x86 cpumask_t uses. cpumask: use cpumask_var_t in uv_flush_tlb_others. cpumask: remove cpumask_t assignment from vector_allocation_domain() cpumask: make Xen use the new operators. cpumask: clean up summit's send_IPI functions cpumask: use new cpumask functions throughout x86 x86: unify cpu_callin_mask/cpu_callout_mask/cpu_initialized_mask/cpu_sibling_setup_mask cpumask: convert struct cpuinfo_x86's llc_shared_map to cpumask_var_t cpumask: convert node_to_cpumask_map[] to cpumask_var_t x86: unify 32 and 64-bit node_to_cpumask_map ...
| * Merge branch 'cpumask-for-linus' of ↵Rusty Russell2009-03-311-2/+1
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip Conflicts: arch/x86/include/asm/topology.h drivers/oprofile/buffer_sync.c (Both cases: changed in Linus' tree, removed in Ingo's).
| | * cpumask: replace node_to_cpumask with cpumask_of_node.Rusty Russell2009-03-131-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: cleanup node_to_cpumask (and the blecherous node_to_cpumask_ptr which contained a declaration) are replaced now everyone implements cpumask_of_node. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* | | Merge branch 'linux-next' of ↵Linus Torvalds2009-04-011-2/+79
|\ \ \ | |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (88 commits) PCI: fix HT MSI mapping fix PCI: don't enable too much HT MSI mapping x86/PCI: make pci=lastbus=255 work when acpi is on PCI: save and restore PCIe 2.0 registers PCI: update fakephp for bus_id removal PCI: fix kernel oops on bridge removal PCI: fix conflict between SR-IOV and config space sizing powerpc/PCI: include pci.h in powerpc MSI implementation PCI Hotplug: schedule fakephp for feature removal PCI Hotplug: rename legacy_fakephp to fakephp PCI Hotplug: restore fakephp interface with complete reimplementation PCI: Introduce /sys/bus/pci/devices/.../rescan PCI: Introduce /sys/bus/pci/devices/.../remove PCI: Introduce /sys/bus/pci/rescan PCI: Introduce pci_rescan_bus() PCI: do not enable bridges more than once PCI: do not initialize bridges more than once PCI: always scan child buses PCI: pci_scan_slot() returns newly found devices PCI: don't scan existing devices ... Fix trivial append-only conflict in Documentation/feature-removal-schedule.txt
| * | PCI: Introduce /sys/bus/pci/rescanAlex Chiang2009-03-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This interface allows the user to force a rescan of all PCI buses in system, and rediscover devices that have been removed earlier. pci_bus_attrs implementation from Trent Piepho. Thanks to Vegard Nossum for discovering locking issues with the sysfs interface. Cc: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | PCI: add remove_id sysfs entryChris Wright2009-03-201-2/+78
| |/ | | | | | | | | | | | | | | | | | | | | | | | | This adds a remove_id sysfs entry to allow users of new_id to later remove the added dynid. One use case is management tools that want to dynamically bind/unbind devices to pci-stub driver while devices are assigned to KVM guests. Rather than having to track which driver was originally bound to the driver, a mangement tool can simply: Guest uses device Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | PCI PM: Restore config spaces of all devices during early resumeRafael J. Wysocki2009-03-301-7/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | At present the configuration spaces of PCI devices that have no drivers or no PM support in the drivers (either legacy or through a pm object) are not saved during suspend and, consequently, they are not restored during resume. This generally may lead to the state of the system being slightly inconsistent after the resume, so it's better to save and restore the configuration spaces of these devices as well. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | PCI PM: Put devices into low power states during late suspend (rev. 2)Rafael J. Wysocki2009-03-301-53/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Once we have allowed timer interrupts to be enabled during the late phase of suspending devices, we are now able to use the generic pci_set_power_state() to put PCI devices into low power states at that time. We can also use some related platform callbacks, like the ones preparing devices for wake-up, during the late suspend. Doing this will allow us to avoid the race condition where a device using shared interrupts is put into a low power state with interrupts enabled and then an interrupt (for another device) comes in and confuses its driver. At the same time, devices that don't support the native PCI PM or that require some additional, platform-specific operations to be carried out to put them into low power states will be handled as appropriate. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | PCI PM: Move pci_restore_standard_config to pci-driver.cRafael J. Wysocki2009-03-301-0/+17
| | | | | | | | | | | | | | | | | | Move pci_restore_standard_config() from pci.c to pci-driver.c and make it static. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | PCI PM: Consistently use variable name "error" for pm call return valuesFrans Pop2009-03-301-10/+10
|/ | | | | | | | | | I noticed two functions use a variable "i" to store the return value of PM function calls while the rest of the file uses "error". As "i" normally indicates a counter of some sort it seems better to keep this consistent. Signed-off-by: Frans Pop <elendil@planet.nl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* PCI PM: make the PM core more careful with drivers using the new PM frameworkRafael J. Wysocki2009-02-041-52/+93
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the PM core always attempts to manage devices with drivers that use the new PM framework. In particular, it attempts to disable the devices (which is unnecessary), to save their state (which may be undesirable if the driver has done that already) and to put them into low power states (again, this may be undesirable if the driver has already put the device into a low power state). That need not be the right thing to do, so make the core be more careful in this respect. Generally, there are the following categories of devices to consider: * bridge devices without drivers * non-bridge devices without drivers * bridge devices with drivers * non-bridge devices with drivers and each of them should be handled differently. For bridge devices without drivers the PCI PM core will save their state on suspend and restore it (early) during resume, after putting them into D0 if necessary. It will not attempt to do anything else to these devices. For non-bridge devices without drivers the PCI PM core will disable them and save their state on suspend. During resume, it will put them into D0, if necessary, restore their state (early) and reenable them. For bridge devices with drivers the PCI PM core will only save their state on suspend if the driver hasn't done that already. Still, the core will restore their state (early) during resume, after putting them into D0, if necessary. For non-bridge devices with drivers the PCI PM core will only save their state on suspend if the driver hasn't done that already. Also, if the state of the device hasn't been saved by the driver, the core will attempt to put the device into a low power state. During resume the core will restore the state of the device (early), after putting it into D0, if necessary. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI PM: Do not disable and enable bridges during suspend-resumeRafael J. Wysocki2009-02-041-4/+6
| | | | | | | | | | | | | It is a mistake to disable and enable PCI bridges and PCI Express ports during suspend-resume, at least at the time when it is currently done. Disabling them may lead to problems with accessing devices behind them and they should be automatically enabled when their standard config spaces are restored. Fix this by not attempting to disable bridges during suspend and enable them during resume. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI PM: Fix saving of device state in pci_legacy_suspendRafael J. Wysocki2009-02-041-2/+8
| | | | | | | | | | | | | | | | | | Make pci_legacy_suspend() save the state of the device if it is in PCI_UNKNOWN after its suspend callback has run and warn only if the power state of the device has been changed by its suspend callback. Also, use WARN_ONCE(), which is more useful, in pci_legacy_suspend(), so that the name of the offending function is printed. Additionally, remove the unnecessary line of code setting pci_dev->state_saved. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI PM: Fix handling of devices without driversRafael J. Wysocki2009-02-041-15/+12
| | | | | | | | | | | | | | | | | | Suspend to RAM is reported to break on some machines as a result of attempting to put one of driverless PCI devices into a low power state. Avoid that by not attepmting to power manage driverless devices during suspend. Fix up pci_pm_poweroff() after a previous incomplete fix for the same thing during hibernation. This patch is reported to fix the regression from 2.6.28 tracked as http://bugzilla.kernel.org/show_bug.cgi?id=12605 Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-and-tested-by: Eric Sesterhenn <snakebyte@gmx.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI PM: Fix hibernation breakage on EeePC 701Rafael J. Wysocki2009-01-271-1/+4
| | | | | | | | | | Hibernation breaks on EeePC 701 as a result of attempting to put one of its (driverless) devices into a low power state. Avoid that by not attepmting to power manage driverless devices during hibernation. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-and-tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI PM: Fix suspend error paths and testing facility breakageRafael J. Wysocki2009-01-271-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | If one of device drivers refuses to suspend by returning error code from its ->suspend() callback, the devices that have already been suspended are resumed by executing their drivers' ->resume() callbacks. Some of these callbacks expect the device's configuration space to be restored if the device has been put into D3 before they are called. Unfortunately, this mechanism has been broken by recent changes moving the restoration of config spaces of some devices (most importantly, USB controllers and HDA Intel) into the resume callbacks executed with interrupts off. Obviously, these callbacks are not invoked in the suspend error path and, as a result, the system cannot be successfully brought back into the working state in case of a suspend error. The same thing happens in the hibernation error path right before putting the system into S4. Similarly, the suspend testing facility associated with the /sys/power/pm_test file is broken, because it uses the very same mechanism that is used in the suspend and hibernation error paths. Fix the breakage by making the PCI core restore the configuration spaces of PCI devices that haven't been restored already before pci_pm_resume() is called for those devices by the PM core. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI PM: Restore standard config registers of all devices earlyRafael J. Wysocki2009-01-161-64/+27
| | | | | | | | | | | | | | | | | | | | | | | | | There is a problem in our handling of suspend-resume of PCI devices that many of them have their standard config registers restored with interrupts enabled and they are put into the full power state with interrupts enabled as well. This may lead to the following scenario: * an interrupt vector is shared between two or more devices * one device is resumed earlier and generates an interrupt * the interrupt handler of another device tries to handle it and attempts to access the device the config space of which hasn't been restored yet and/or which still is in a low power state * the system crashes as a result To prevent this from happening we should restore the standard configuration registers of all devices with interrupts disabled and we should put them into the D0 power state right after that. Unfortunately, this cannot be done using the existing pci_set_power_state(), because it can sleep. Also, to do it we have to make sure that the config spaces of all devices were actually saved during suspend. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI PM: Put PM callbacks in the order of executionRafael J. Wysocki2009-01-071-43/+43
| | | | | | | | | | | Put PM callbacks in drivers/pci/pci-driver.c in the order in which they are executed which makes it much easier to follow the code. No functional changes should result from this. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI PM: Run default PM callbacks for all devices using new frameworkRafael J. Wysocki2009-01-071-82/+53
| | | | | | | | | | | | | | | | | | | It should be quite clear that it generally makes sense to execute the default PM callbacks (ie. the callbacks used for handling suspend, hibernation and resume of PCI devices without drivers) for all devices. Of course, the drivers that provide legacy PCI PM support (ie. the ->suspend, ->suspend_late, ->resume_early or ->resume hooks in the pci_driver structure), carry out these operations too, so we can't do it for devices with such drivers. Still, we can make the default PM callbacks run for devices with drivers using the new framework (ie. implement the pm object), since there are no such drivers at the moment. This also simplifies the code and makes it smaller. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI PM: Call pci_fixup_device from legacy routinesRafael J. Wysocki2009-01-071-33/+19
| | | | | | | | | | | | The size of drivers/pci/pci-driver.c can be reduced quite a bit if pci_fixup_device() is called from the legacy PM callbacks, so make it happen. No functional changes should result from this. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI PM: Rearrange code in pci-driver.cRafael J. Wysocki2009-01-071-41/+75
| | | | | | | | | Rename two functions and rearrange code in drivers/pci/pci-driver.c so that it's easier to follow. In particular, separate invocations of the legacy callbacks from the rest of the new callbacks' code. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI PM: Avoid touching devices behind bridges in unknown stateRafael J. Wysocki2009-01-071-37/+72
| | | | | | | | | | | | | | | | | | | | | | | | | It generally is better to avoid accessing devices behind bridges that may not be in the D0 power state, because in that case the bridges' secondary buses may not be accessible. For this reason, during the early phase of resume (ie. with interrupts disabled), before restoring the standard config registers of a device, check the power state of the bridge the device is behind and postpone the restoration of the device's config space, as well as any other operations that would involve accessing the device, if that state is not D0. In such cases the restoration of the device's config space will be retried during the "normal" phase of resume (ie. with interrupts enabled), so that the bridge can be put into D0 before that happens. Also, save standard configuration registers of PCI devices during the "normal" phase of suspend (ie. with interrupts enabled), so that the bridges the devices are behind can be put into low power states (we don't put bridges into low power states at the moment, but we may want to do it in the future and it seems reasonable to design for that). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI PM: Move pci_has_legacy_pm_supportRafael J. Wysocki2009-01-071-8/+8
| | | | | | | | | Move pci_has_legacy_pm_support() closer to the functions that call it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI PM: Power-manage devices without drivers during suspend-resumeRafael J. Wysocki2009-01-071-4/+29
| | | | | | | | | | | | | PCI devices without drivers can be put into low power states during suspend with the help of pci_prepare_to_sleep() and prevented from generating wake-up events during resume with the help of pci_enable_wake(). However, it's better not to put bridges into low power states during suspend, because that might result in entire bus segments being powered off. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI PM: Add suspend counterpart of pci_reenable_deviceRafael J. Wysocki2009-01-071-5/+30
| | | | | | | | | | | | | | | | | PCI devices without drivers are not disabled during suspend and hibernation, but they are enabled during resume, with the help of pci_reenable_device(), so there is an unbalanced execution of pcibios_enable_device() in the resume code path. To correct this introduce function pci_disable_enabled_device() that will disable the argument device, if it is enabled when the function is being run, without updating the device's pci_dev structure and use it in the suspend code path to balance the pci_reenable_device() executed during resume. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI PM: Fix poweroff and restore callbacksRafael J. Wysocki2009-01-071-5/+5
| | | | | | | | | | pci_fixup_device() is called too early in pci_pm_poweroff() and too late in pci_pm_restore(). Moreover, pci_pm_restore_noirq() calls pci_fixup_device() twice and in a wrong way. Fix that. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: work_on_cpu: use in drivers/pci/pci-driver.cRusty Russell2009-01-071-20/+32
| | | | | | | | | | | | | | | | This uses work_on_cpu(), rather than altering the cpumask of the thread which we happen to be. Note the cleanups: 1) I've removed the CONFIG_NUMA test, since dev_to_node() returns -1 for !CONFIG_NUMA anyway and the compiler will eliminate it. 2) No need to reset mempolicy to default (a bad idea anyway) since work_on_cpu is run from a workqueue. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: allow pci driver to support only dynidsChris Wright2009-01-071-9/+11
| | | | | | | | | | | | commit b41d6cf38e27 (PCI: Check dynids driver_data value for validity) requires all drivers to include an id table to try and match driver_data. Before validating driver_data check driver has an id table. Acked-by: Jean Delvare <khali@linux-fr.org> Cc: Milton Miller <miltonm@bga.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Rework default handling of suspend and resumeRafael J. Wysocki2009-01-061-31/+63
| | | | | | | | | | | | | | | | | | | | | | | Rework the handling of suspend and resume of PCI devices which have no drivers or the drivers of which do not provide any suspend-resume callbacks in such a way that their standard PCI configuration registers will be saved and restored with interrupts disabled. This should prevent such devices, including PCI bridges, from being resumed too late to be able to function correctly during the resume of the other PCI devices that may depend on them. Also, to remove one possible source of future confusion, drop the default handling of suspend and resume for PCI devices with drivers providing the 'pm' object introduced by the new suspend-resume framework (there are no such PCI drivers at the moment). This patch addresses the regression from 2.6.26 tracked as http://bugzilla.kernel.org/show_bug.cgi?id=12121 . Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PM: Simplify the new suspend/hibernation framework for devicesRafael J. Wysocki2009-01-061-28/+18
| | | | | | | | | | | | | | | | | | | | | | PM: Simplify the new suspend/hibernation framework for devices Following the discussion at the Kernel Summit, simplify the new device PM framework by merging 'struct pm_ops' and 'struct pm_ext_ops' and removing pointers to 'struct pm_ext_ops' from 'struct platform_driver' and 'struct pci_driver'. After this change, the suspend/hibernation callbacks will only reside in 'struct device_driver' as well as at the bus type/ device class/device type level. Accordingly, PCI and platform device drivers are now expected to put their suspend/hibernation callbacks into the 'struct device_driver' embedded in 'struct pci_driver' or 'struct platform_driver', respectively. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: Check dynids driver_data value for validityJean Delvare2008-10-201-2/+16
| | | | | | | | | | | Only accept dynids whose driver_data value matches one of the driver's pci_driver_id entries. This prevents the user from accidentally passing values the drivers do not expect. Cc: Milton Miller <miltonm@bga.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: remove dynids.use_driver_dataMilton Miller2008-10-201-2/+1
| | | | | | | | | | | | | | | | The driver flag dynids.use_driver_data is almost consistently not set, and causes more problems than it solves. It was initially intended as a flag to indicate whether a driver's usage of driver_data had been carefully inspected and was ready for values from userspace. That audit was never done, so most drivers just get a 0 for driver_data when new IDs are added from userspace via sysfs. So remove the flag, allowing drivers to see the data directly (a followon patch validates the passed driver_data value against what the drivers expect). Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* Merge branch 'linux-next' of ↵Linus Torvalds2008-07-161-42/+346
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (72 commits) Revert "x86/PCI: ACPI based PCI gap calculation" PCI: remove unnecessary volatile in PCIe hotplug struct controller x86/PCI: ACPI based PCI gap calculation PCI: include linux/pm_wakeup.h for device_set_wakeup_capable PCI PM: Fix pci_prepare_to_sleep x86/PCI: Fix PCI config space for domains > 0 Fix acpi_pm_device_sleep_wake() by providing a stub for CONFIG_PM_SLEEP=n PCI: Simplify PCI device PM code PCI PM: Introduce pci_prepare_to_sleep and pci_back_from_sleep PCI ACPI: Rework PCI handling of wake-up ACPI: Introduce new device wakeup flag 'prepared' ACPI: Introduce acpi_device_sleep_wake function PCI: rework pci_set_power_state function to call platform first PCI: Introduce platform_pci_power_manageable function ACPI: Introduce acpi_bus_power_manageable function PCI: make pci_name use dev_name PCI: handle pci_name() being const PCI: add stub for pci_set_consistent_dma_mask() PCI: remove unused arch pcibios_update_resource() functions PCI: fix pci_setup_device()'s sprinting into a const buffer ... Fixed up conflicts in various files (arch/x86/kernel/setup_64.c, arch/x86/pci/irq.c, arch/x86/pci/pci.h, drivers/acpi/sleep/main.c, drivers/pci/pci.c, drivers/pci/pci.h, include/acpi/acpi_bus.h) from x86 and ACPI updates manually.
| * PCI: implement new suspend/resume callbacksRafael J. Wysocki2008-06-101-46/+346
| | | | | | | | | | | | | | | | Implement new suspend and hibernation callbacks for the PCI bus type. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * Suspend/Resume bug in PCI layer wrt quirksRafael J. Wysocki2008-06-101-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Some quirks should be called with interrupt disabled, we can't directly call them in .resume_early. Also the patch introduces pci_fixup_resume_early and pci_fixup_suspend, which matches current device core callbacks (.suspend/.resume_early). TBD: Somebody knows why we need quirk resume should double check if a quirk should be called in resume or resume_early. I changed some per my understanding, but can't make sure I fixed all. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | PCI: use dev_to_node in pci_call_probeYinghai Lu2008-05-241-1/+1
|/ | | | | | | | to make sure get one online node. Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* pci/irq: let pci_device_shutdown to call pci_msi_shutdown v2Yinghai Lu2008-04-291-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | [PATCH 2/2] pci/irq: let pci_device_shutdown to call pci_msi_shutdown v2 this change | commit 23a274c8a5adafc74a66f16988776fc7dd6f6e51 | Author: Prakash, Sathya <sathya.prakash@lsi.com> | Date: Fri Mar 7 15:53:21 2008 +0530 | | [SCSI] mpt fusion: Enable MSI by default for SAS controllers | | This patch modifies the driver to enable MSI by default for all SAS chips. | | Signed-off-by: Sathya Prakash <sathya.prakash@lsi.com> | Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> | Causes the kexec of a RHEL 5.1 kernel to fail. root casue: the rhel 5.1 kernel still uses INTx emulation. and mptscsih_shutdown doesn't call pci_disable_msi to reenable INTx on kexec path So call pci_msi_shutdown in the shutdown path to do the same thing to msix Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@hobbes.lan>
* generic: use new set_cpus_allowed_ptr functionMike Travis2008-04-191-3/+6
| | | | | | | | | | | | | | | | | * Use new set_cpus_allowed_ptr() function added by previous patch, which instead of passing the "newly allowed cpus" cpumask_t arg by value, pass it by pointer: -int set_cpus_allowed(struct task_struct *p, cpumask_t new_mask) +int set_cpus_allowed_ptr(struct task_struct *p, const cpumask_t *new_mask) * Modify CPU_MASK_ALL Depends on: [sched-devel]: sched: add new set_cpus_allowed_ptr function Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* PCI: Mem Policy: fix mempolicy usage in pci driverLee Schermerhorn2008-02-011-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In an attempt to ensure memory allocation from the local node, the pci driver temporarily replaces the current task's memory policy with the system default policy. Trying to be a good citizen, the driver then call's mpol_get() on the new policy. When it's finished probing, it undoes the '_get by calling mpol_free() [on the system default policy] and then restores the current task's saved mempolicy. A couple of issues here: 1) it's never necessary to set a task's mempolicy to the system default policy in order to get system default allocation behavior. Simply set the current task's mempolicy to NULL and allocations will fall back to system default policy. 2) we should never [need to] call mpol_free() on the system default policy. [I plan on trapping this with a VM_BUG_ON() in a subsequent patch.] This patch removes the calls to mpol_get() and mpol_free() and uses NULL for the temporary task mempolicy to effect default allocation behavior. Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Acked-by: Christoph Lameter <clameter@sgi.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: remove foolish code from pci-driver.cGreg Kroah-Hartman2008-01-241-45/+5
| | | | | | | | | | | | The PCI bus should not be trying to declare its own attribute type. Especially as this code could never ever be called because the driver core overwrites the driver kobject type to be its own internal type. Delete all of this code as it was never being used and is not correct. Also update my copyright on the file while I'm touching things there. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: use proper call to driver_create_fileGreg Kroah-Hartman2008-01-241-2/+7
| | | | | | | | Don't try to call the "raw" sysfs_create_file when we already have a helper function to do this kind of work for us. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: make pci_match_device() staticAdrian Bunk2007-11-051-3/+2
| | | | | | | | pci_match_device() no longer has any other users. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds2007-10-121-2/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (37 commits) PCI: merge almost all of pci_32.h and pci_64.h together PCI: X86: Introduce and enable PCI domain support PCI: Add 'nodomains' boot option, and pci_domains_supported global PCI: modify PCI bridge control ISA flag for clarity PCI: use _CRS for PCI resource allocation PCI: avoid P2P prefetch window for expansion ROMs PCI: skip ISA ioresource alignment on some systems PCI: remove transparent bridge sizing pci: write file size to inode on proc bus file write pci: use size stored in proc_dir_entry for proc bus files pci: implement "pci=noaer" PCI: fix IDE legacy mode resources MSI: Use correct data offset for 32-bit MSI in read_msi_msg() PCI: Fix incorrect argument order to list_add_tail() in PCI dynamic ID code PCI: i386: Compaq EVO N800c needs PCI bus renumbering PCI: Remove no longer correct documentation regarding MSI vector assignment PCI: re-enable onboard sound on "MSI K8T Neo2-FIR" PCI: quirk_vt82c586_acpi: Omit reading PCI revision ID PCI: quirk amd_8131_mmrbc: Omit reading pci revision ID cpqphp: Use PCI_CLASS_REVISION instead of PCI_REVISION_ID for read ...
OpenPOWER on IntegriCloud