summaryrefslogtreecommitdiffstats
path: root/drivers/pci/msi.c
Commit message (Collapse)AuthorAgeFilesLines
* PCI: Add mask bit definition for MSI-X tableSheng Yang2010-12-231-2/+3
| | | | | | | | | Then we can use it instead of magic number 1. Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* msi: Introduce default_[teardown|setup]_msi_irqs with fallback.Thomas Gleixner2010-10-181-2/+12
| | | | | | | | | | | | | Introduce an override for the arch_[teardown|setup]_msi_irqs that can be utilized to fallback to the default arch_* code. If a platform wants to utilize the code paths defined in driver/pci/msi.c it has to define HAVE_DEFAULT_MSI_TEARDOWN_IRQS or HAVE_DEFAULT_MSI_SETUP_IRQS. Otherwise the old mechanism of over-ridding the arch_* works fine. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: x86@kernel.org
* pci: Cleanup the irq_desc mess in msiThomas Gleixner2010-10-121-15/+9
| | | | | | | | | | | Handing down irq_desc to msi just so that msi can access irq_desc.irq_data.msi_desc is a pretty stupid idea. The calling code can hand down a pointer to msi_desc so msi code does not need to know about the irq descriptor at all. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* pci: Convert msi to new irq_chip functionsThomas Gleixner2010-10-121-7/+7
| | | | | | | | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Tony Luck <tony.luck@intel.com> Cc: Russell King <linux@arm.linux.org.uk>
* PCI: MSI: Restore read_msi_msg_desc(); add get_cached_msi_msg_desc()Ben Hutchings2010-07-301-5/+42
| | | | | | | | | | | | | | | | | | | | commit 2ca1af9aa3285c6a5f103ed31ad09f7399fc65d7 "PCI: MSI: Remove unsafe and unnecessary hardware access" changed read_msi_msg_desc() to return the last MSI message written instead of reading it from the device, since it may be called while the device is in a reduced power state. However, the pSeries platform code really does need to read messages from the device, since they are initially written by firmware. Therefore: - Restore the previous behaviour of read_msi_msg_desc() - Add new functions get_cached_msi_msg{,_desc}() which return the last MSI message written - Use the new functions where appropriate Acked-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: MSI: Remove unsafe and unnecessary hardware accessBen Hutchings2010-07-301-23/+11
| | | | | | | | | | | | | | | | | | | | | During suspend on an SMP system, {read,write}_msi_msg_desc() may be called to mask and unmask interrupts on a device that is already in a reduced power state. At this point memory-mapped registers including MSI-X tables are not accessible, and config space may not be fully functional either. While a device is in a reduced power state its interrupts are effectively masked and its MSI(-X) state will be restored when it is brought back to D0. Therefore these functions can simply read and write msi_desc::msg for devices not in D0. Further, read_msi_msg_desc() should only ever be used to update a previously written message, so it can always read msi_desc::msg and never needs to touch the hardware. Tested-by: "Michael Chan" <mchan@broadcom.com> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: fix wrong memory address handling in MSI-XKenji Kaneshige2010-07-301-1/+1
| | | | | | | | | Use resource_size_t for MMIO address instead of unsigned long. Otherwise, higher 32-bits of MMIO address are cleared unexpectedly in x86-32 PAE. Acked-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* PCI MSI: Style cleanupsHidetoshi Seto2009-09-091-22/+22
| | | | | | | | | | | | | Cleanups (nearly based on checkpatch). Before: total: 11 errors, 2 warnings, 0 checks, 842 lines checked After: total: 0 errors, 0 warnings, 0 checks, 842 lines checked v2: fix it's/its mistakes in comment Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI MSI: MSI-X cleanup, msix_setup_entries()Hidetoshi Seto2009-09-091-23/+36
| | | | | | | | Cleanup based on the prototype from Matthew Milcox. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI MSI: MSI-X cleanup, msix_program_entries()Hidetoshi Seto2009-09-091-10/+19
| | | | | | | | Cleanup based on the prototype from Matthew Milcox. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI MSI: MSI-X cleanup, msix_map_region()Hidetoshi Seto2009-09-091-13/+19
| | | | | | | | Cleanup based on the prototype from Matthew Milcox. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI MSI: Relocate error path in init_msix_capability()Hidetoshi Seto2009-09-091-18/+22
| | | | | | | | Move it from the middle of the function to the end. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI MSI: Unify msi_free_irqs() and msix_free_all_irqs()Hidetoshi Seto2009-09-091-43/+31
| | | | | | | | | | | Unify msi_free_irqs() and msix_free_all_irqs(), and rename it to a common void function free_msi_irqs(). And relocate the common function to where the prototype is located now. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI MSI: Use list_first_entry()Hidetoshi Seto2009-09-091-1/+1
| | | | | | | | use list_first_entry() instead of list_entry(). Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI MSI: Remove attribute check from pci_disable_msi()Hidetoshi Seto2009-09-091-8/+1
| | | | | | | | | | | | | The msi_list never have MSI-X's msi_desc while MSI is enabled, and also it never have MSI's msi_desc while MSI-X is enabled. This patch remove check for MSI-X entry from the pci_disable_msi(), referring that pci_disable_msix() does not have any check for MSI entry. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI MSI: Fix restoration of MSI/MSI-X mask states in suspend/resumeHidetoshi Seto2009-06-291-7/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are 2 problems on mask states in suspend/resume. [1]: It is better to restore the mask states of MSI/MSI-X to initial states (MSI is unmasked, MSI-X is masked) when we release the device. The pci_msi_shutdown() does the restoration of mask states for MSI, while the msi_free_irqs() does it for MSI-X. In other words, in the "disable" path both of MSI and MSI-X are handled, but in the "shutdown" path only MSI is handled. MSI: pci_disable_msi() => pci_msi_shutdown() [ mask states for MSI restored ] => msi_set_enable(dev, pos, 0); => msi_free_irqs() MSI-X: pci_disable_msix() => pci_msix_shutdown() => msix_set_enable(dev, 0); => msix_free_all_irqs => msi_free_irqs() [ mask states for MSI-X restored ] This patch moves the masking for MSI-X from msi_free_irqs() to pci_msix_shutdown(). This change has some positive side effects: - It prevents OS from touching mask states before reading preserved bits in the register, which can be happen if msi_free_irqs() is called from error path in msix_capability_init(). - It also prevents touching the register after turning off MSI-X in "disable" path, which can be a problem on some devices. [2]: We have cache of the mask state in msi_desc, which is automatically updated when msi/msix_mask_irq() is called. This cached states are used for the resume. But since what need to be restored in the resume is the states before the shutdown on the suspend, calling msi/msix_mask_irq() from pci_msi/msix_shutdown() is not appropriate. This patch introduces __msi/msix_mask_irq() that do mask as same as msi/msix_mask_irq() but does not update cached state, for use in pci_msi/msix_shutdown(). [updated: get rid of msi/msix_mask_irq_nocache() (proposed by Matthew Wilcox)] Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI MSI: Unmask MSI if setup failedHidetoshi Seto2009-06-291-0/+1
| | | | | | | | | | The initial state of mask register of MSI is unmasked. We set it masked before calling arch_setup_msi_irqs(). If arch_setup_msi_irq() fails, it is better to restore the state of the mask register. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI MSI: shorten PCI_MSIX_ENTRY_* symbol namesHidetoshi Seto2009-06-291-10/+8
| | | | | | | | These names are too long! Drop _OFFSET to save some bytes/lines. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI MSI: Return if alloc_msi_entry for MSI-X failedHidetoshi Seto2009-06-291-2/+8
| | | | | | | | | | | | | | | | | | | | | | In current code it continues setup even if alloc_msi_entry() for MSI-X is failed due to lack of memory. It means arch_setup_msi_irqs() might be called with msi_desc entries less than its argument nvec. At least x86's arch_setup_msi_irqs() uses list_for_each_entry() for dev->msi_list that suspected to have entries same numbers as nvec, and it doesn't check the number of allocated vectors and passed arg nvec. Therefore it will result in success of pci_enable_msix(), with less vectors allocated than requested. This patch fixes the error route to return -ENOMEM, instead of continuing the setup (proposed by Matthew Wilcox). Note that there is no iounmap in msi_free_irqs() if no msi_disc is allocated. Reviewed-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: make msi_free_irqs() to use msix_mask_irq() instead of open coded writeHidetoshi Seto2009-06-191-4/+1
| | | | | | | | Use msix_mask_irq() instead of direct use of writel, so as not to clear preserved bits in the Vector Control register [31:1]. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Fix the NIU MSI-X problem in a better wayMatthew Wilcox2009-06-191-18/+28
| | | | | | | | | | | | | | | | | | | The previous MSI-X fix (8d181018532dd709ec1f789e374cda92d7b01ce1) had three bugs. First, it didn't move the write that disabled the vector. This led to writing garbage to the MSI-X vector (spotted by Michael Ellerman). It didn't fix the PCI resume case, and it had a race window where the device could generate an interrupt before the MSI-X registers were programmed (leading to a DMA to random addresses). Fortunately, the MSI-X capability has a bit to mask all the vectors. By setting this bit instead of clearing the enable bit, we can ensure the device will not generate spurious interrupts. Since the capability is now enabled, the NIU device will not have a problem with the reads and writes to the MSI-X registers being in the original order in the code. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: remove redundant __msi_set_enable()Matthew Wilcox2009-06-181-20/+18
| | | | | | | | | | We have the 'pos' of the MSI capability at all locations which call msi_set_enable(), so pass it to msi_set_enable() instead of making it find the capability every time. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: remove invalid comment of msi_mask_irq()Kenji Kaneshige2009-06-161-3/+0
| | | | | | | | Remove invalid comment of msi_mask_irq(). Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI MSI: let drivers retry when not enough vectorsMichael S. Tsirkin2009-06-111-3/+3
| | | | | | | | | | | | | pci_enable_msix currently returns -EINVAL if you ask for more vectors than supported by the device, which would typically cause fallback to regular interrupts. It's better to return the table size, making the driver retry MSI-X with less vectors. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI MSI: Define PCI_MSI_MASK_32/64Hidetoshi Seto2009-06-111-1/+1
| | | | | | | | | | | Impact: cleanup, improve readability Define PCI_MSI_MASK_32/64 for 32/64bit devices, instead of using implicit offset (-4), "PCI_MSI_MASK_BIT - 4" and "PCI_MSI_MASK_BIT". Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI MSI: Fix MSI-X with NIU cardsMatthew Wilcox2009-05-111-2/+6
| | | | | | | | | | | | The NIU device refuses to allow accesses to MSI-X registers before MSI-X is enabled. This patch fixes the problem by moving the read of the mask register to after MSI-X is enabled. Reported-by: David S. Miller <davem@davemloft.net> Tested-by: David S. Miller <davem@davemloft.net> Reviewed-by: David S. Miller <davem@davemloft.net> Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI MSI: Add support for multiple MSIMatthew Wilcox2009-03-201-27/+64
| | | | | | | | | | Add the new API pci_enable_msi_block() to allow drivers to request multiple MSI and reimplement pci_enable_msi in terms of pci_enable_msi_block. Ensure that the architecture back ends don't have to know about multiple MSI. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI MSI: Refactor interrupt masking codeMatthew Wilcox2009-03-201-80/+75
| | | | | | | | | | | | | | | | | | Since most of the callers already know whether they have an MSI or an MSI-X capability, split msi_set_mask_bits() into msi_mask_irq() and msix_mask_irq(). The only callers which don't (mask_msi_irq() and unmask_msi_irq()) can share code in msi_set_mask_bit(). This then becomes the only caller of msix_flush_writes(), so we can inline it. The flushing read can be to any address that belongs to the device, so we can eliminate the calculation too. We can also get rid of maskbits_mask from struct msi_desc and simply recalculate it on the rare occasion that we need it. The single-bit 'masked' element is replaced by a copy of the 32-bit 'masked' register, so this patch does not affect the size of msi_desc. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI MSI: Use mask_pos instead of mask_base when appropriateMatthew Wilcox2009-03-201-3/+2
| | | | | | | | MSI interrupts have a mask_pos where MSI-X have a mask_base. Use a transparent union to get rid of some ugly casts. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI MSI: msi_desc->dev is always initialisedMatthew Wilcox2009-03-201-17/+12
| | | | | | | | | By passing the pci_dev into alloc_msi_entry() we can be sure that the ->dev entry is always assigned and so we don't need to check it. Also, we used kzalloc() so we don't need to initialise ->irq to 0. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI MSI: Replace 'type' with 'is_msix'Matthew Wilcox2009-03-201-76/+39
| | | | | | | | | | By changing from a 5-bit field to a 1-bit field, we free up some bits that can be used by a later patch. Also rearrange the fields for better packing on 64-bit platforms (reducing the size of msi_desc from 72 bytes to 64 bytes). Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI/MSI: Allow arch code to return the number of MSI-X availableMichael Ellerman2009-03-191-9/+12
| | | | | | | | | | | | | | | | | | | | | | | | | There is code in msix_capability_init() which, when the requested number of MSI-X couldn't be allocated, calculates how many MSI-X /could/ be allocated and returns that to the driver. That allows the driver to then make a second request, with a number of MSIs that should succeed. The current code requires the arch code to setup as many msi_descs as it can, and then return to the generic code. On some platforms the arch code may already know how many MSI-X it can allocate, before it sets up any of the msi_descs. So change the logic such that if the arch code returns a positive error code, that is taken to be the number of MSI-X that could be allocated. If the error code is negative we still calculate the number available using the old method. Because it's a little subtle, make sure the error return code from arch_setup_msi_irq() is always negative. That way only implementations of arch_setup_msi_irqs() need to be careful about returning a positive error code. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI/MSI: Use #ifdefs instead of weak functionsMichael Ellerman2009-03-191-17/+9
| | | | | | | | | | | | | | | | | | | | | Weak functions aren't all they're cracked up to be. They lead to incorrect binaries with some toolchains, they require us to have empty functions we otherwise wouldn't, and the unused code is not elided (as of gcc 4.3.2 anyway). So replace the weak MSI arch hooks with the #define foo foo idiom. We no longer need empty versions of arch_setup/teardown_msi_irq(). This is less source (by 1 line!), and results in smaller binaries too: text data bss dec hex filename 9354300 1693916 678424 11726640 b2ef30 build/powerpc/vmlinux-before 9354052 1693852 678424 11726328 b2edf8 build/powerpc/vmlinux-after Also smaller on x86_64 and arm (iop13xx). Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI/MSI: Introduce pci_msix_table_size()Rafael J. Wysocki2009-03-191-5/+19
| | | | | | | | | | Introduce new function pci_msix_table_size() returning the size of the MSI-X table of given PCI device or 0 if the device doesn't support MSI-X. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI/MSI: fix msi_mask() shift fixMatthew Wilcox2009-02-131-6/+4
| | | | | | | | | | | | | Hidetoshi Seto points out that commit bffac3c593eba1f9da3efd0199e49ea6558a40ce has wrong values in the array. Rather than correct the array, we can just use a bounds check and perform the calculation specified in the comment. As a bonus, this will not run off the end of the array if the device specifies an illegal value in the MSI capability. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI MSI: Fix undefined shift by 32Matthew Wilcox2009-01-271-2/+11
| | | | | | | | | Add an msi_mask() function which returns the correct bitmask for the number of MSI interrupts you have. This fixes an undefined bug in msi_capability_init(). Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI/MSI: bugfix/utilize for msi_capability_init()Hidetoshi Seto2009-01-161-9/+7
| | | | | | | | | | | | | | | | | | | | | This patch fix a following bug and does a cleanup. bug: commit 5993760f7fc75b77e4701f1e56dc84c0d6cf18d5 had a wrong change (since is_64 is boolean[0|1]): - pci_write_config_dword(dev, - msi_mask_bits_reg(pos, is_64bit_address(control)), - maskbits); + pci_write_config_dword(dev, entry->msi_attrib.is_64, maskbits); utilize: Unify separated if (entry->msi_attrib.maskbit) statements. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Acked-by: "Jike Song" <albcamus@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* ACPI/PCI: PCI MSI _OSC support capabilities called when root bridge addedAndrew Patterson2009-01-071-20/+11
| | | | | | | | | | The _OSC capability OSC_MSI_SUPPORT is set when the root bridge is added with pci_acpi_osc_support(), so we no longer need to do it in the PCI MSI driver. Also adds the function pci_msi_enabled, which returns true if pci=nomsi is not on the kernel command-line. Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* x86, MSI: pass irq_cfg and irq_descYinghai Lu2008-12-081-17/+38
| | | | | | | | | | Impact: simplify code Pass irq_desc and cfg around, instead of raw IRQ numbers - this way we dont have to look it up again and again. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* ACPI/PCI: Set support bit for MSI in support field of _OSCTaku Izumi2008-10-221-0/+21
| | | | | | | | | Currently linux doesn't have any code to set the "MSI supported" bit in Support Fireld of _OSC. This patch adds the code for that. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: utilize calculated results when detecting MSI featuresJike Song2008-10-201-6/+4
| | | | | | | | In msi_capability_init, we can make use of the calculated results instead of calling is_mask_bit_support and is_64bit_address twice. Signed-off-by: Jike Song <albcamus@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: fully restore MSI state at resume timeJesse Barnes2008-08-071-3/+2
| | | | | | | | | | | | With the recent change to avoid masking MSIs using the MSI enable bit, devices without an MSI mask bit will have their MSI capability always enabled when MSI is in use, so we need to restore it regardless of the mask bit state. Fixes kernel bz 11178. Acked-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI MSI: Don't disable MSIs if the mask bit isn't supportedMatthew Wilcox2008-07-281-3/+12
| | | | | | | | | | David Vrabel has a device which generates an interrupt storm on the INTx pin if we disable MSI interrupts altogether. Masking interrupts is only a performance optimisation, so we can ignore the request to mask the interrupt. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: use dev_printk when possibleBjorn Helgaas2008-06-251-6/+4
| | | | | | | | | | | | | | | | | | | | | | Convert printks to use dev_printk(). I converted pr_debug() to dev_dbg(). Both use KERN_DEBUG and are enabled only when DEBUG is defined. I converted printk(KERN_DEBUG) to dev_printk(KERN_DEBUG), not to dev_dbg(), because dev_dbg() is only enabled when DEBUG is defined. I converted DBG(KERN_INFO) (only in setup-bus.c) to dev_info(). The DBG() name makes it sound like debug, but it's been enabled forever, so dev_info() preserves the previous behavior. I tried to make the resource assignment formats more consistent, e.g., "BAR %d: got res [%#llx-%#llx] bus [%#llx-%#llx] flags %#lx\n" instead of sometimes using "start-end" and sometimes using "size@start". I'm not attached to one or the other; I'd just like them consistent. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI/MSI: skip calling pci_find_capability from msi_set_mask_bitsHidetoshi Seto2008-06-101-4/+8
| | | | | | | | | The position of MSI capability is already cached in the msi_desc when we enter the msi_set_mask_bits(). Use it instead. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* pci/irq: let pci_device_shutdown to call pci_msi_shutdown v2Yinghai Lu2008-04-291-9/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | [PATCH 2/2] pci/irq: let pci_device_shutdown to call pci_msi_shutdown v2 this change | commit 23a274c8a5adafc74a66f16988776fc7dd6f6e51 | Author: Prakash, Sathya <sathya.prakash@lsi.com> | Date: Fri Mar 7 15:53:21 2008 +0530 | | [SCSI] mpt fusion: Enable MSI by default for SAS controllers | | This patch modifies the driver to enable MSI by default for all SAS chips. | | Signed-off-by: Sathya Prakash <sathya.prakash@lsi.com> | Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> | Causes the kexec of a RHEL 5.1 kernel to fail. root casue: the rhel 5.1 kernel still uses INTx emulation. and mptscsih_shutdown doesn't call pci_disable_msi to reenable INTx on kexec path So call pci_msi_shutdown in the shutdown path to do the same thing to msix Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@hobbes.lan>
* pci/irq: restore mask_bits in msi shutdown -v3Yinghai Lu2008-04-291-7/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [PATCH 1/2] pci/irq: restore mask_bits in msi shutdown -v3 Yinghai found that kexec'ing a RHEL 5.1 kernel with 2.6.25-rc3+ kernels prevents his NIC from working. He bisected to | commit 89d694b9dbe769ca1004e01db0ca43964806a611 | Author: Thomas Gleixner <tglx@linutronix.de> | Date: Mon Feb 18 18:25:17 2008 +0100 | | genirq: do not leave interupts enabled on free_irq | | The default_disable() function was changed in commit: | | 76d2160147f43f982dfe881404cfde9fd0a9da21 | genirq: do not mask interrupts by default | For MSI, default_shutdown will call mask_bit for msi device. All mask bits will left disabled after free_irq. Then in the kexec case, the next kernel can only use msi_enable bit, so all device's MSI can not be used. So lets to restore the mask bit to its pci reset defined value (enabled) when we disable the kernels use of msi to be a little friendlier to kexec'd kernels. Extend msi_set_mask_bit to msi_set_mask_bits to take mask, so we can fully restore that to 0x00 instead of 0xfe. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@hobbes.lan>
* PCI: drivers/pci/msi.c: move arch hooks to the topAdrian Bunk2008-02-011-46/+45
| | | | | | | | | | | | | | | | | | | This patch fixes the following problem present with older gcc versions: <-- snip --> ... CC drivers/pci/msi.o /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/pci/msi.c:692: warning: weak declaration of `arch_msi_check_device' after first use results in unspecified behavior /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/pci/msi.c:704: warning: weak declaration of `arch_setup_msi_irqs' after first use results in unspecified behavior /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/pci/msi.c:724: warning: weak declaration of `arch_teardown_msi_irqs' after first use results in unspecified behavior ... <-- snip --> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: export pci_restore_msi_state()Linas Vepstas2008-02-011-2/+1
| | | | | | | | | | | | | | | PCI error recovery usually involves the PCI adapter being reset. If the device is using MSI, the reset will cause the MSI state to be lost; the device driver needs to restore the MSI state. The pci_restore_msi_state() routine is currently protected by CONFIG_PM; remove this, and also export the symbol, so that it can be used in a modle. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
OpenPOWER on IntegriCloud