summaryrefslogtreecommitdiffstats
path: root/drivers/pci/hotplug
Commit message (Collapse)AuthorAgeFilesLines
* PCI: Remove the fakephp driverBjorn Helgaas2012-08-243-190/+1
| | | | | | | | | | The fakephp driver was scheduled for removal in 2011. Fakephp presented /sys/bus/pci/slots/.../power files for every PCI function. Writing "0" to one of these files logically removed the device from the system. The PCI core now provides the same functionality with /sys/bus/pci/devices/.../remove. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* Merge tag 'for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds2012-07-2417-256/+128
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull PCI changes from Bjorn Helgaas: "Host bridge hotplug: - Add MMCONFIG support for hot-added host bridges (Jiang Liu) Device hotplug: - Move fixups from __init to __devinit (Sebastian Andrzej Siewior) - Call FINAL fixups for hot-added devices, too (Myron Stowe) - Factor out generic code for P2P bridge hot-add (Yinghai Lu) - Remove all functions in a slot, not just those with _EJx (Amos Kong) Dynamic resource management: - Track bus number allocation (struct resource tree per domain) (Yinghai Lu) - Make P2P bridge 1K I/O windows work with resource reassignment (Bjorn Helgaas, Yinghai Lu) - Disable decoding while updating 64-bit BARs (Bjorn Helgaas) Power management: - Add PCIe runtime D3cold support (Huang Ying) Virtualization: - Add VFIO infrastructure (ACS, DMA source ID quirks) (Alex Williamson) - Add quirks for devices with broken INTx masking (Jan Kiszka) Miscellaneous: - Fix some PCI Express capability version issues (Myron Stowe) - Factor out some arch code with a weak, generic, pcibios_setup() (Myron Stowe)" * tag 'for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (122 commits) PCI: hotplug: ensure a consistent return value in error case PCI: fix undefined reference to 'pci_fixup_final_inited' PCI: build resource code for M68K architecture PCI: pciehp: remove unused pciehp_get_max_lnk_width(), pciehp_get_cur_lnk_width() PCI: reorder __pci_assign_resource() (no change) PCI: fix truncation of resource size to 32 bits PCI: acpiphp: merge acpiphp_debug and debug PCI: acpiphp: remove unused res_lock sparc/PCI: replace pci_cfg_fake_ranges() with pci_read_bridge_bases() PCI: call final fixups hot-added devices PCI: move final fixups from __init to __devinit x86/PCI: move final fixups from __init to __devinit MIPS/PCI: move final fixups from __init to __devinit PCI: support sizing P2P bridge I/O windows with 1K granularity PCI: reimplement P2P bridge 1K I/O windows (Intel P64H2) PCI: disable MEM decoding while updating 64-bit MEM BARs PCI: leave MEM and IO decoding disabled during 64-bit BAR sizing, too PCI: never discard enable/suspend/resume_early/resume fixups PCI: release temporary reference in __nv_msi_ht_cap_quirk() PCI: restructure 'pci_do_fixups()' ...
| * Merge branch 'pci/yinghai-pciehp-unused' into nextBjorn Helgaas2012-07-182-105/+0
| |\ | | | | | | | | | | | | * pci/yinghai-pciehp-unused: PCI: pciehp: remove unused pciehp_get_max_lnk_width(), pciehp_get_cur_lnk_width()
| | * PCI: pciehp: remove unused pciehp_get_max_lnk_width(), ↵Yinghai Lu2012-07-122-105/+0
| | | | | | | | | | | | | | | | | | | | | pciehp_get_cur_lnk_width() Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
| * | Merge branch 'pci/julia-return-values' into nextBjorn Helgaas2012-07-164-16/+40
| |\ \ | | | | | | | | | | | | | | | | * pci/julia-return-values: PCI: hotplug: ensure a consistent return value in error case
| | * | PCI: hotplug: ensure a consistent return value in error caseJulia Lawall2012-07-164-16/+40
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Typically, the return value desired for the failure of a function with an integer return value is a negative integer. In these cases, the return value is sometimes a negative integer and sometimes 0, due to a subsequent initialization of the return variable within the loop. A simplified version of the semantic match that finds this problem is: (http://coccinelle.lip6.fr/) //<smpl> @r exists@ identifier ret; position p; constant C; expression e1,e3,e4; statement S; @@ ret = -C ... when != ret = e3 when any if@p (...) S ... when any if (\(ret != 0\|ret < 0\|ret > 0\) || ...) { ... return ...; } ... when != ret = e3 when any *if@p (...) { ... when != ret = e4 return ret; } //</smpl> [bhelgaas: squashed into one patch] Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | Merge branch 'pci/yinghai-hotplug-cleanup' into nextBjorn Helgaas2012-07-113-11/+3
| |\ \ | | | | | | | | | | | | | | | | | | | | * pci/yinghai-hotplug-cleanup: PCI: acpiphp: merge acpiphp_debug and debug PCI: acpiphp: remove unused res_lock
| | * | PCI: acpiphp: merge acpiphp_debug and debugYinghai Lu2012-07-102-6/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Should not have two, just remove debug, and use module_param_named instead. Also change acpiphp_debug to bool. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| | * | PCI: acpiphp: remove unused res_lockYinghai Lu2012-07-102-5/+0
| | |/ | | | | | | | | | | | | | | | res_lock is never used, so remove it. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | Merge branch 'topic/bjorn-trivial' into nextBjorn Helgaas2012-06-222-7/+9
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * topic/bjorn-trivial: PCI: remove useless pcix_set_mmrbc() dev->bus check PCI: acpiphp: check whether _ADR evaluation succeeded PCI: shpchp: remove dead code PCI: fix P2P bridge I/O port window sign extension PCI: fix upstream P2P bridge checks when enabling OBFF and LTR PCI: use __weak consistently PCI: cleanup assign_requested_resources_sorted() kernel-doc warning sparc/PCI: remove unused pcibios_assign_resource() definition
| | * | PCI: acpiphp: check whether _ADR evaluation succeededBjorn Helgaas2012-06-201-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Check whether we evaluated _ADR successfully. Previously we ignored failure, so we would have used garbage data from the stack as the device and function number. We return AE_OK so that we ignore only this slot and continue looking for other slots. Found by Coverity (CID 113981). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| | * | PCI: shpchp: remove dead codeBjorn Helgaas2012-06-201-3/+0
| | |/ | | | | | | | | | | | | | | | | | | | | | "slots_not_empty" is initialized to zero and can't be set again before reaching this point, so this return statement is dead. Remove it. Found by Coverity (CID 114324). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | PCI: acpiphp: remove all functions in slot, even without ACPI _EJxAmos Kong2012-06-131-10/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we add a device with acpiphp, we enumerate all functions in the slot with pci_scan_slot(), regardless of whether they have associated ACPI methods such as _EJ0. When removing the device, we previously removed only the functions with those ACPI methods. This patch makes the remove symmetric with the add: we remove all functions in the slot, whether they have associated ACPI methods or not. With qemu-kvm and SeaBIOS, we can build a multi-function device where only function 0 has _EJ0 and _ADR (see bugzilla below). Removing and re-adding that slot (including all functions of the device) works correctly with Windows guests. This patch makes it also work in Linux guests. [bhelgaas: restructure loop iteration, pull out of slot->funcs loop] Reference: https://bugzilla.kernel.org/show_bug.cgi?id=43219 Signed-off-by: Amos Kong <kongjianjun@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | PCI: acpiphp: fix function 0 leak when disabling a slotAmos Kong2012-06-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, we acquired two references to function 0, but only released one. [bhelgaas: split this out from "remove all functions" fix] Signed-off-by: Amos Kong <kongjianjun@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | PCI: sgihp: use generic pci_hp_add_bridge()Yinghai Lu2012-06-131-9/+5
| | | | | | | | | | | | | | | | | | | | | Use the new generic pci_hp_add_bridge() interface. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | PCI: ibmhp: use generic pci_hp_add_bridge()Yinghai Lu2012-06-131-6/+4
| | | | | | | | | | | | | | | | | | | | | Use the new generic pci_hp_add_bridge() interface. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | PCI: cpqhp: use generic pci_hp_add_bridge()Yinghai Lu2012-06-131-6/+4
| | | | | | | | | | | | | | | | | | | | | Use the new generic pci_hp_add_bridge() interface. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | PCI: shpchp: use generic pci_hp_add_bridge()Yinghai Lu2012-06-131-32/+15
| | | | | | | | | | | | | | | | | | | | | Use the new generic pci_hp_add_bridge() interface. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | PCI: cpci_hotplug: use generic pci_hp_add_bridge()Yinghai Lu2012-06-131-31/+6
| | | | | | | | | | | | | | | | | | | | | Use the new generic pci_hp_add_bridge() interface. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | PCI: pciehp: use generic pci_hp_add_bridge()Yinghai Lu2012-06-131-26/+2
| | | | | | | | | | | | | | | | | | | | | Use the new generic pci_hp_add_bridge() interface. [bhelgaas: split "add generic pci_hp_add_bridge()" into a separate patch] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | PCI: sgihp: register busn_resYinghai Lu2012-06-131-1/+3
| | | | | | | | | | | | Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | PCI: ibmhp: register busn_resYinghai Lu2012-06-131-1/+3
| | | | | | | | | | | | Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | PCI: cpqhp: register busn_resYinghai Lu2012-06-131-1/+3
| | | | | | | | | | | | Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | PCI: shpchp: register busn_resYinghai Lu2012-06-131-1/+3
| | | | | | | | | | | | Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | PCI: cpci_hotplug: register busn_resYinghai Lu2012-06-131-1/+3
| | | | | | | | | | | | Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | PCI: replace struct pci_bus secondary/subordinate with busn_resYinghai Lu2012-06-135-15/+15
| |/ | | | | | | | | | | | | | | | | Replace the struct pci_bus secondary/subordinate members with the struct resource busn_res. Later we'll build a resource tree of these bus numbers. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | pci: hotplug: Fix typo in pciMasanari Iida2012-07-243-3/+3
|/ | | | | | | Correct spelling typo in drivers/pci/hotplug. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* PCI: make acpihp use __pci_remove_bus_device insteadYinghai Lu2012-02-271-1/+1
| | | | | | | pci_stop_bus_device gets called before in the same loop. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Rename pci_remove_bus_device to pci_stop_and_remove_bus_deviceYinghai Lu2012-02-279-10/+10
| | | | | | | | | | | | | The old pci_remove_bus_device actually did stop and remove. Make the name reflect that to reduce confusion. This patch is done by sed scripts and changes back some incorrect __pci_remove_bus_device changes. Suggested-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI hotplug: cpcihp: fix debug module parameter to be boolDanny Kukawka2012-02-141-1/+1
| | | | | | | | | Fix debug variable from module parameter to be really bool to fix 'warning: return from incompatible pointer type'. Acked-by: Scott Murray <scott@spiteful.org> Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: pciehp: Disable/enable link during slot power off/onYinghai Lu2012-02-141-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | On a system with a repeater on the system board to support gen2 hotplug, we found that when an ExpressModule is removed from some slots, /var/log/messages will be full of "card present/not present" warnings. It turns out the root complex is continually trying to train the link to the repeater because the repeater has not been reset. This patch will disable the link at removal time to allow the repeater to be reset properly. This also prevents a potential AER message at removal time. Also, when testing hotplug on a system under development, we found if we boot the system without an EM installed, and later hot-add an EM, it does not work with Linux, but another OS is ok. The root cause is that BIOS left link disabled when slot was empty at boot time, and other OS is modifying the link disable bit in link ctrl during power on/off. So we should do the same thing to disable/enable link during power off/on. -v2: check link DLLA bit instead of 100ms waiting. Separate link disable/enable functions to another patch. Signed-off-by: Yinghai Lu <yinghai.lu@oracle.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: pciehp: Add Disable/enable link functionsYinghai Lu2012-02-141-0/+36
| | | | | | | Will use it during power off/on of slots Signed-off-by: Yinghai Lu <yinghai.lu@oracle.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: pciehp: Add pcie_wait_link_not_active()Yinghai Lu2012-02-141-4/+15
| | | | | | | Will use it for link disable status checking. Signed-off-by: Yinghai Lu <yinghai.lu@oracle.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: pciehp: make check_link_active more helpfulYinghai Lu2012-02-141-5/+12
| | | | | | | | | | A few changes: - remove the 'inline' and let the complier decide - return a bool to indicate whether the link was active - add a debug message to indicate link state when it beocmes active Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: pciehp: replace unconditional sleep with config space access checkYinghai Lu2012-02-141-15/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | During reviewing | PCI: pciehp: wait 1000 ms before Link Training check Linus said: >... > That's a *long* time, and it's irritating to the user. It makes the > user think "the machine is slow". >... > And quite frankly, an unconditional one-second delay here seems bad. >Two seconds was unacceptable, one second is just bad. Try to access the pci conf of a pci device that is supposed to show up in 1s. If we can read back a valid vendor/device id, we can return early. Related discussion could be found: https://lkml.org/lkml/2011/12/6/339 -v2: seperate code to pci_bus_read_dev_vendor_id() from pci_scan_device() and reuse it from pciehp code. Suggested by Matthew Wilcox. -v3: According to Kenj, don't use array in stack, and don't wait too long for crs, also return fail status if not found. Also separate pci_bus_dev_read_vendor_id() change to another patch. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: drivers/pci/hotplug/ibmphp_ebda.c: add missing iounmapJulia Lawall2012-02-141-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add missing iounmap in error handling code, in a case where the function already preforms iounmap on some other execution path. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e; statement S,S1; int ret; @@ e = \(ioremap\|ioremap_nocache\)(...) ... when != iounmap(e) if (<+...e...+>) S ... when any when != iounmap(e) *if (...) { ... when != iounmap(e) return ...; } ... when any iounmap(e); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Can continually add funcs after adding func0Amos Kong2012-02-141-16/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Boot up a KVM guest, and hotplug multifunction devices(func1,func2,func0,func3) to guest. for i in 1 2 0 3;do qemu-img create /tmp/resize$i.qcow2 1G -f qcow2 (qemu) drive_add 0x11.$i id=drv11$i,if=none,file=/tmp/resize$i.qcow2 (qemu) device_add virtio-blk-pci,id=dev11$i,drive=drv11$i,addr=0x11.$i,multifunction=on done In linux kernel, when func0 of the slot is hot-added, the whole slot will be marked as 'enabled', then driver will ignore other new hotadded funcs. But in Win7 & WinXP, we can continaully add other funcs after adding func0, all funcs will be added in guest. drivers/pci/hotplug/acpiphp_glue.c: static int acpiphp_check_bridge(struct acpiphp_bridge *bridge) { .... for (slot = bridge->slots; slot; slot = slot->next) { if (slot->flags & SLOT_ENABLED) { acpiphp_disable_slot() else acpiphp_enable_slot() .... | } v enable_device() | v //only don't enable slot if func0 is not added list_for_each_entry(func, &slot->funcs, sibling) { ... } slot->flags |= SLOT_ENABLED; //mark slot to 'enabled' This patch just make pci driver can continaully add funcs after adding func 0. Only mark slot to 'enabled' when all funcs are added. For pci multifunction hotplug, we can add functions one by one(func 0 is necessary), and all functions will be removed in one time. Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* module_param: make bool parameters really bool (drivers & misc)Rusty Russell2012-01-1314-22/+22
| | | | | | | | | | | | module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
*-. Merge branches 'iommu/fixes', 'arm/omap' and 'x86/amd' into nextJoerg Roedel2012-01-094-14/+3
|\ \ | | | | | | | | | | | | Conflicts: drivers/pci/hotplug/acpiphp_glue.c
| | * PCI/ACPI: Make acpiphp ignore root bridges using SHPC native hotplugRafael J. Wysocki2011-12-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the kernel has requested control of the SHPC native hotplug feature for a given root bridge, the acpiphp driver should not try to handle that root bridge and it should leave it to shpchp. Failing to do so causes problems to happen if shpchp is loaded and unloaded before loading acpiphp (ACPI-based hotplug won't work in that case anyway). To address this issue make find_root_bridges() ignore PCI root bridges with SHPC native hotplug enabled and make add_bridge() return error code if SHPC native hotplug is enabled for the given root bridge. This causes acpiphp to refuse to load if SHPC native hotplug is enabled for all root bridges and to refuse binding to the root bridges with SHPC native hotplug enabled. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| | * PCI: pciehp: Handle push button event asynchronouslyKenji Kaneshige2011-12-054-13/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use non-ordered workqueue for attention button events. Attention button events on each slot can be handled asynchronously. So we should use non-ordered workqueue. This patch also removes ordered workqueue in pciehp as a result. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| | * PCI: pciehp: Fix wrong workqueue cleanupKenji Kaneshige2011-12-051-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | Fix improper workqueue cleanup. In the current pciehp, pcied_cleanup() calls destroy_workqueue() before calling pcie_port_service_unregister(). This causes kernel oops because flush_workqueue() is called in the pcie_port_service_unregister() code path after the workqueue was destroyed. So pcied_cleanup() must call pcie_port_service_unregister() first before calling destroy_workqueue(). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | PCI: Set device power state to PCI_D0 for device without native PM supportAjaykumar Hotchandani2011-12-141-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During test of one IB card with guest VM, found that, msi is not initialized properly. It turns out __write_msi_msg will do nothing if device current_state is not PCI_D0. And, that pci device does not have pm_cap in guest VM. There is an error in setting of power state to PCI_D0 in pci_enable_device(), but error is not returned for this. Following is code flow: pci_enable_device() --> __pci_enable_device_flags() --> do_pci_enable_device() --> pci_set_power_state() --> __pci_start_power_transition() We have following condition inside __pci_start_power_transition(): if (platform_pci_power_manageable(dev)) { error = platform_pci_set_power_state(dev, state); if (!error) pci_update_current_state(dev, state); } else { error = -ENODEV; /* Fall back to PCI_D0 if native PM is not supported */ if (!dev->pm_cap) dev->current_state = PCI_D0; } Here, from platform_pci_set_power_state(), acpi_pci_set_power_state() is getting called and that is failing with ENODEV because of following condition: if (!handle || ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0",&tmp))) return -ENODEV; Because of that, pci_update_current_state() is not getting called. With this patch, if device power state can not be set via platform_pci_set_power_state and that device does not have native pm support, then PCI device power state will be set to PCI_D0. -v2: This also reverts 47e9037ac16637cd7f12b8790ea7ce6680e42168, as it's not needed after this change. Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Ajaykumar Hotchandani<ajaykumar.hotchandani@oracle.com> Signed-off-by: Yinghai Lu<yinghai.lu@oracle.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | PCI hotplug: Always allow acpiphp to handle non-PCIe bridgesRafael J. Wysocki2011-12-131-17/+12
|/ | | | | | | | | | | | | | | | | | | | | | | Commit 0d52f54e2ef64c189dedc332e680b2eb4a34590a (PCI / ACPI: Make acpiphp ignore root bridges using PCIe native hotplug) added code that made the acpiphp driver completely ignore PCIe root complexes for which the kernel had been granted control of the native PCIe hotplug feature by the BIOS through _OSC. Unfortunately, however, this was a mistake, because on some systems there were PCI bridges supporting PCI (non-PCIe) hotplug under such root complexes and those bridges should have been handled by acpiphp. For this reason, revert the changes made by the commit mentioned above and make register_slot() in drivers/pci/hotplug/acpiphp_glue.c avoid registering hotplug slots for PCIe ports that belong to root complexes with native PCIe hotplug enabled (which means that the BIOS has granted the kernel control of this feature for the given root complex). This is reported to address the original issue fixed by commit 0d52f54e2ef64c189dedc332e680b2eb4a34590a and to work on the system where that commit broke things. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* Merge branch 'for-linus' of ↵Linus Torvalds2011-11-235-21/+46
|\ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: PCI hotplug: shpchp: don't blindly claim non-AMD 0x7450 device IDs PCI: pciehp: wait 100 ms after Link Training check PCI: pciehp: wait 1000 ms before Link Training check PCI: pciehp: Retrieve link speed after link is trained PCI: Let PCI_PRI depend on PCI PCI: Fix compile errors with PCI_ATS and !PCI_IOV PCI / ACPI: Make acpiphp ignore root bridges using PCIe native hotplug
| * PCI hotplug: shpchp: don't blindly claim non-AMD 0x7450 device IDsBjorn Helgaas2011-11-142-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously we claimed device ID 0x7450, regardless of the vendor, which is clearly wrong. Now we'll claim that device ID only for AMD. I suspect this was just a typo in the original code, but it's possible this change will break shpchp on non-7450 AMD bridges. If so, we'll have to fix them as we find them. Reference: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=638863 Reported-by: Ralf Jung <ralfjung-e@gmx.de> Cc: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: pciehp: wait 100 ms after Link Training checkKenji Kaneshige2011-11-111-0/+8
| | | | | | | | | | | | | | | | | | | | | | If the port supports Link speeds greater than 5.0 GT/s, we must wait for 100 ms after Link training completes before sending configuration request. Acked-by: Yinghai Lu <yinghai@kernel.org> Tested-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: pciehp: wait 1000 ms before Link Training checkKenji Kaneshige2011-11-112-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | We need to wait for 1000 ms after Data Link Layer Link Active (DLLLA) bit reads 1b before sending configuration request. Currently pciehp does this wait after checking Link Training (LT) bit. But we need it before checking LT bit because LT is still set even after DLLLA bit is set on some platforms. Acked-by: Yinghai Lu <yinghai@kernel.org> Tested-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: pciehp: Retrieve link speed after link is trainedYinghai Lu2011-11-071-9/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During hot plug, board_added will call pciehp_power_on_slot(). But link speed is updated in pciehp_power_on_slot(). We should not update link speed there, because that is too early. So move the link speed update to pciehp_check_link_status() after making sure the link has been trained. -v2: fix compile warning that Kenji found. Signed-off-by: Yinghai Lu <yinghai.lu@oracle.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Tested-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI / ACPI: Make acpiphp ignore root bridges using PCIe native hotplugRafael J. Wysocki2011-10-311-5/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the kernel has requested control of the PCIe native hotplug feature for a given root complex, the acpiphp driver should not try to handle that root complex and it should leave it to pciehp. Failing to do so causes problems to happen if acpiphp is loaded before pciehp on such systems. To address this issue make find_root_bridges() ignore PCIe root complexes with PCIe native hotplug enabled and make add_bridge() return error code if PCIe native hotplug is enabled for the given root port. This causes acpiphp to refuse to load if PCIe native hotplug is enabled for all complexes and to refuse binding to the root complexes with PCIe native hotplug is enabled. Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
OpenPOWER on IntegriCloud