summaryrefslogtreecommitdiffstats
path: root/drivers/pci/hotplug/acpiphp_glue.c
Commit message (Collapse)AuthorAgeFilesLines
*-. Merge branches 'pci/hotplug', 'pci/pci_is_bridge' and 'pci/virtualization' ↵Bjorn Helgaas2014-05-281-2/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into next * pci/hotplug: PCI: cpqphp: Fix possible null pointer dereference NVMe: Implement PCIe reset notification callback PCI: Notify driver before and after device reset * pci/pci_is_bridge: pcmcia: Use pci_is_bridge() to simplify code PCI: pciehp: Use pci_is_bridge() to simplify code PCI: acpiphp: Use pci_is_bridge() to simplify code PCI: cpcihp: Use pci_is_bridge() to simplify code PCI: shpchp: Use pci_is_bridge() to simplify code PCI: rpaphp: Use pci_is_bridge() to simplify code sparc/PCI: Use pci_is_bridge() to simplify code powerpc/PCI: Use pci_is_bridge() to simplify code ia64/PCI: Use pci_is_bridge() to simplify code x86/PCI: Use pci_is_bridge() to simplify code PCI: Use pci_is_bridge() to simplify code PCI: Add new pci_is_bridge() interface PCI: Rename pci_is_bridge() to pci_has_subordinate() * pci/virtualization: PCI: Introduce new device binding path using pci_dev.driver_override Conflicts: drivers/pci/pci-sysfs.c
| | * PCI: acpiphp: Use pci_is_bridge() to simplify codeYijing Wang2014-05-271-2/+1
| |/ | | | | | | | | | | | | | | Use pci_is_bridge() to simplify code. No functional change. Requires: 326c1cdae741 PCI: Rename pci_is_bridge() to pci_has_subordinate() Requires: 1c86438c9423 PCI: Add new pci_is_bridge() interface Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | PCI: Remove unnecessary __ref annotationsBjorn Helgaas2014-04-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some PCI functions used to be marked __devinit. When CONFIG_HOTPLUG was not set, these functions were discarded after boot. A few callers of these __devinit functions were marked __ref to indicate that they could safely call the __devinit functions even though the callers were not __devinit. But CONFIG_HOTPLUG and __devinit are now gone, and the need for the __ref annotations is also gone, so remove them. Relevant historical commits: 54b956b90360 Remove __dev* markings from init.h a8e4b9c101ae PCI: add generic pci_hp_add_bridge() 0ab2b57f8db8 PCI: fix section mismatch warning in pci_scan_child_bus 451124a7cc6c PCI: fix 4x section mismatch warnings Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | PCI: Remove unnecessary includes of <linux/init.h>Paul Gortmaker2014-04-141-1/+0
|/ | | | | | | | | None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* Merge tag 'pci-v3.15-changes' of ↵Linus Torvalds2014-04-011-3/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "Enumeration - Increment max correctly in pci_scan_bridge() (Andreas Noever) - Clarify the "scan anyway" comment in pci_scan_bridge() (Andreas Noever) - Assign CardBus bus number only during the second pass (Andreas Noever) - Use request_resource_conflict() instead of insert_ for bus numbers (Andreas Noever) - Make sure bus number resources stay within their parents bounds (Andreas Noever) - Remove pci_fixup_parent_subordinate_busnr() (Andreas Noever) - Check for child busses which use more bus numbers than allocated (Andreas Noever) - Don't scan random busses in pci_scan_bridge() (Andreas Noever) - x86: Drop pcibios_scan_root() check for bus already scanned (Bjorn Helgaas) - x86: Use pcibios_scan_root() instead of pci_scan_bus_with_sysdata() (Bjorn Helgaas) - x86: Use pcibios_scan_root() instead of pci_scan_bus_on_node() (Bjorn Helgaas) - x86: Merge pci_scan_bus_on_node() into pcibios_scan_root() (Bjorn Helgaas) - x86: Drop return value of pcibios_scan_root() (Bjorn Helgaas) NUMA - x86: Add x86_pci_root_bus_node() to look up NUMA node from PCI bus (Bjorn Helgaas) - x86: Use x86_pci_root_bus_node() instead of get_mp_bus_to_node() (Bjorn Helgaas) - x86: Remove mp_bus_to_node[], set_mp_bus_to_node(), get_mp_bus_to_node() (Bjorn Helgaas) - x86: Use NUMA_NO_NODE, not -1, for unknown node (Bjorn Helgaas) - x86: Remove acpi_get_pxm() usage (Bjorn Helgaas) - ia64: Use NUMA_NO_NODE, not MAX_NUMNODES, for unknown node (Bjorn Helgaas) - ia64: Remove acpi_get_pxm() usage (Bjorn Helgaas) - ACPI: Fix acpi_get_node() prototype (Bjorn Helgaas) Resource management - i2o: Fix and refactor PCI space allocation (Bjorn Helgaas) - Add resource_contains() (Bjorn Helgaas) - Add %pR support for IORESOURCE_UNSET (Bjorn Helgaas) - Mark resources as IORESOURCE_UNSET if we can't assign them (Bjorn Helgaas) - Don't clear IORESOURCE_UNSET when updating BAR (Bjorn Helgaas) - Check IORESOURCE_UNSET before updating BAR (Bjorn Helgaas) - Don't try to claim IORESOURCE_UNSET resources (Bjorn Helgaas) - Mark 64-bit resource as IORESOURCE_UNSET if we only support 32-bit (Bjorn Helgaas) - Don't enable decoding if BAR hasn't been assigned an address (Bjorn Helgaas) - Add "weak" generic pcibios_enable_device() implementation (Bjorn Helgaas) - alpha, microblaze, sh, sparc, tile: Use default pcibios_enable_device() (Bjorn Helgaas) - s390: Use generic pci_enable_resources() (Bjorn Helgaas) - Don't check resource_size() in pci_bus_alloc_resource() (Bjorn Helgaas) - Set type in __request_region() (Bjorn Helgaas) - Check all IORESOURCE_TYPE_BITS in pci_bus_alloc_from_region() (Bjorn Helgaas) - Change pci_bus_alloc_resource() type_mask to unsigned long (Bjorn Helgaas) - Log IDE resource quirk in dmesg (Bjorn Helgaas) - Revert "[PATCH] Insert GART region into resource map" (Bjorn Helgaas) PCI device hotplug - Make check_link_active() non-static (Rajat Jain) - Use link change notifications for hot-plug and removal (Rajat Jain) - Enable link state change notifications (Rajat Jain) - Don't disable the link permanently during removal (Rajat Jain) - Don't check adapter or latch status while disabling (Rajat Jain) - Disable link notification across slot reset (Rajat Jain) - Ensure very fast hotplug events are also processed (Rajat Jain) - Add hotplug_lock to serialize hotplug events (Rajat Jain) - Remove a non-existent card, regardless of "surprise" capability (Rajat Jain) - Don't turn slot off when hot-added device already exists (Yijing Wang) MSI - Keep pci_enable_msi() documentation (Alexander Gordeev) - ahci: Fix broken single MSI fallback (Alexander Gordeev) - ahci, vfio: Use pci_enable_msi_range() (Alexander Gordeev) - Check kmalloc() return value, fix leak of name (Greg Kroah-Hartman) - Fix leak of msi_attrs (Greg Kroah-Hartman) - Fix pci_msix_vec_count() htmldocs failure (Masanari Iida) Virtualization - Device-specific ACS support (Alex Williamson) Freescale i.MX6 - Wait for retraining (Marek Vasut) Marvell MVEBU - Use Device ID and revision from underlying endpoint (Andrew Lunn) - Fix incorrect size for PCI aperture resources (Jason Gunthorpe) - Call request_resource() on the apertures (Jason Gunthorpe) - Fix potential issue in range parsing (Jean-Jacques Hiblot) Renesas R-Car - Check platform_get_irq() return code (Ben Dooks) - Add error interrupt handling (Ben Dooks) - Fix bridge logic configuration accesses (Ben Dooks) - Register each instance independently (Magnus Damm) - Break out window size handling (Magnus Damm) - Make the Kconfig dependencies more generic (Magnus Damm) Synopsys DesignWare - Fix RC BAR to be single 64-bit non-prefetchable memory (Mohit Kumar) Miscellaneous - Remove unused SR-IOV VF Migration support (Bjorn Helgaas) - Enable INTx if BIOS left them disabled (Bjorn Helgaas) - Fix hex vs decimal typo in cpqhpc_probe() (Dan Carpenter) - Clean up par-arch object file list (Liviu Dudau) - Set IORESOURCE_ROM_SHADOW only for the default VGA device (Sander Eikelenboom) - ACPI, ARM, drm, powerpc, pcmcia, PCI: Use list_for_each_entry() for bus traversal (Yijing Wang) - Fix pci_bus_b() build failure (Paul Gortmaker)" * tag 'pci-v3.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (108 commits) Revert "[PATCH] Insert GART region into resource map" PCI: Log IDE resource quirk in dmesg PCI: Change pci_bus_alloc_resource() type_mask to unsigned long PCI: Check all IORESOURCE_TYPE_BITS in pci_bus_alloc_from_region() resources: Set type in __request_region() PCI: Don't check resource_size() in pci_bus_alloc_resource() s390/PCI: Use generic pci_enable_resources() tile PCI RC: Use default pcibios_enable_device() sparc/PCI: Use default pcibios_enable_device() (Leon only) sh/PCI: Use default pcibios_enable_device() microblaze/PCI: Use default pcibios_enable_device() alpha/PCI: Use default pcibios_enable_device() PCI: Add "weak" generic pcibios_enable_device() implementation PCI: Don't enable decoding if BAR hasn't been assigned an address PCI: Enable INTx in pci_reenable_device() only when MSI/MSI-X not enabled PCI: Mark 64-bit resource as IORESOURCE_UNSET if we only support 32-bit PCI: Don't try to claim IORESOURCE_UNSET resources PCI: Check IORESOURCE_UNSET before updating BAR PCI: Don't clear IORESOURCE_UNSET when updating BAR PCI: Mark resources as IORESOURCE_UNSET if we can't assign them ... Conflicts: arch/x86/include/asm/topology.h drivers/ata/ahci.c
| * ACPI / hotplug / PCI: Use list_for_each_entry() for bus traversalYijing Wang2014-02-141-3/+3
| | | | | | | | | | | | | | Replace list_for_each() + pci_bus_b() with list_for_each_entry(). Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net>
* | Merge branch 'acpi-pci-hotplug' into acpi-hotplugRafael J. Wysocki2014-03-061-5/+2
|\ \
| * | ACPI / hotplug / PCI: Use pci_device_is_present()Rafael J. Wysocki2014-03-051-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Make the ACPI-based PCI hotplug (ACPIPHP) code use pci_device_is_present() for checking if devices are present instead of open coding the same thing. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* | | ACPI / dock: Add .uevent() callback to struct acpi_hotplug_contextRafael J. Wysocki2014-02-211-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to avoid the need to register special ACPI dock operations for SATA devices add a .uevent() callback pointer to struct acpi_hotplug_context and make dock_hotplug_event() use that callback if available. Also rename the existing .event() callback in struct acpi_hotplug_context to .notify() to avoid possible confusion in the future. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | | ACPI / dock: Use callback pointers from devices' ACPI hotplug contextsRafael J. Wysocki2014-02-211-70/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of requiring a set of special dock operations to be registered via register_hotplug_dock_device() for each ACPI dock device, it is much more straightforward to use callback pointers from the devices' hotplug contexts if available. For this reason, modify dock_hotplug_event() to use callback pointers from the hotplug contexts of ACPI devices and fall back to using the special dock operarions only if those callbacks are missing. Also make the ACPI-based PCI hotplug (ACPIPHP) subsystem set the .fixup callback pointer in the hotplug contexts of devices handled by it to a new function, acpiphp_post_dock_fixup(), so that the dock station driver can use the callbacks from those contexts instead of special dock operations registered via register_hotplug_dock_device(). Along with the above changes drop the ACPIPHP's dock operations that are not necessary any more. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | | ACPI / dock: Use ACPI device object pointers instead of ACPI handlesRafael J. Wysocki2014-02-211-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rework the ACPI dock station driver to store ACPI device object pointers instead of ACPI handles in its internal data structures. The purpose is moslty to make subsequent simplifications possible, but also this allows the overall code size to be reduced slightly. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | | Merge branch 'acpi-pci-hotplug' into acpi-dockRafael J. Wysocki2014-02-211-10/+19
|\ \ \ | |/ /
| * | ACPI / hotplug / PCI: Add ACPIPHP contexts to devices handled by PCIeHPRafael J. Wysocki2014-02-161-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, ACPIPHP does not add hotplug context to devices that should be handled by the native PCI hotplug (PCIeHP) code. The reason why was because PCIeHP didn't know about the devices' connections with ACPI and would not clean up things properly during an eject of an ACPI-backed device, for example. However, after recent changes that made the ACPI core create struct acpi_device objects for all namespace nodes regardless of the underlying devices' status and added PCI rescan-remove locking to both ACPIPHP and PCIeHP, that concern is not valid any more. Namely, after those changes PCIeHP need not care about the ACPI side of things any more and it should be serialized with respect to ACPIPHP and they won't be running concurrently with each other in any case. For this reason, make ACPIPHP to add its hotplug context to all devices with ACPI companions, even the ones that should be handled by PCIeHP in principle. That may work around hotplug issues on some systems where PCIeHP is supposed to work, but it doesn't and the ACPI hotplug signaling works instead. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| * | ACPI / hotplug / PCI: Rename register_slot() to acpiphp_add_context()Rafael J. Wysocki2014-02-161-5/+11
| | | | | | | | | | | | | | | | | | | | | | | | The name of register_slot() doesn't really reflect what the function is does, so rename it to acpiphp_add_context() and add a proper kerneldoc comment to it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | | ACPI / hotplug: Add .fixup() callback to struct acpi_hotplug_contextRafael J. Wysocki2014-02-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order for the ACPI dock station code to be able to use the callbacks pointed to by the ACPI device objects' hotplug contexts add a .fixup() callback pointer to struct acpi_hotplug_context. That callback will be useful to handle PCI devices located in dock stations. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | | ACPI / hotplug / PCI: Do not clear event callback pointer for docksRafael J. Wysocki2014-02-211-7/+0
|/ / | | | | | | | | | | | | | | | | After recent changes adding dock station handling to the ACPI hotplug core, it is not necessary to clear the .event() pointer in the ACPIPHP device hotplug context for dock stations any more, so don't do that. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | Merge back earlier 'acpi-pci-hotplug' material.Rafael J. Wysocki2014-02-121-281/+124
|\ \ | | | | | | | | | | | | Conflicts: drivers/pci/hotplug/acpiphp_glue.c
| * | ACPI / hotplug / PCI: Execute _EJ0 under the ACPI scan lockRafael J. Wysocki2014-02-101-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since acpi_device_hotplug() assumes that ACPI handles of device objects passed to it will not become invalid while acpi_scan_lock is being held, make acpiphp_disable_slot() acquire acpi_scan_lock, because it generally causes _EJ0 to be executed for one of the devices in the slot and that may cause its ACPI handle to become invalid. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| * | ACPI / hotplug / PCI: Rework acpiphp_check_host_bridge()Rafael J. Wysocki2014-02-061-8/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the only existing caller of acpiphp_check_host_bridge(), which is acpi_pci_root_scan_dependent(), already has a struct acpi_device pointer needed to obtain the ACPIPHP context, it doesn't make sense to execute acpi_bus_get_device() on its handle in acpiphp_handle_to_bridge() just in order to get that pointer back. For this reason, modify acpiphp_check_host_bridge() to take a struct acpi_device pointer as its argument and rearrange the code accordingly. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
| * | ACPI / hotplug / PCI: Hotplug notifications from acpi_bus_notify()Rafael J. Wysocki2014-02-061-11/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since acpi_bus_notify() is executed on all notifications for all devices anyway, make it execute acpi_device_hotplug() for all hotplug events instead of installing notify handlers pointing to the same function for all hotplug devices. This change reduces both the size and complexity of ACPI-based device hotplug code. Moreover, since acpi_device_hotplug() only does significant things for devices that have either an ACPI scan handler, or a hotplug context with .eject() defined, and those devices had notify handlers pointing to acpi_hotplug_notify_cb() installed before anyway, this modification shouldn't change functionality. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| * | ACPI / hotplug / PCI: Simplify acpi_install_hotplug_notify_handler()Rafael J. Wysocki2014-02-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Since acpi_hotplug_notify_cb() does not use its data argument any more, the second argument of acpi_install_hotplug_notify_handler() can be dropped, so do that and update its callers accordingly. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| * | ACPI / hotplug / PCI: Consolidate ACPIPHP with ACPI core hotplugRafael J. Wysocki2014-02-061-130/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ACPI-based PCI hotplug (ACPIPHP) code currently attaches its hotplug context objects directly to ACPI namespace nodes representing hotplug devices. However, after recent changes causing struct acpi_device to be created for every namespace node representing a device (regardless of its status), that is not necessary any more. Moreover, it's vulnerable to the theoretical issue that the ACPI handle passed in the context between handle_hotplug_event() and hotplug_event_work() may become invalid in the meantime (as a result of a concurrent table unload). In principle, this issue might be addressed by adding a non-empty release handler for ACPIPHP hotplug context objects analogous to acpi_scan_drop_device(), but that would duplicate the code in that function and in acpi_device_del_work_fn(). For this reason, it's better to modify ACPIPHP to attach its device hotplug contexts to struct device objects representing hotplug devices and make it use acpi_hotplug_notify_cb() as its notify handler. At the same time, acpi_device_hotplug() can be modified to dispatch the new .hp.event() callback pointing to acpiphp_hotplug_event() from ACPI device objects associated with PCI devices or use the generic ACPI device hotplug code for device objects with matching scan handlers. This allows the existing code duplication between ACPIPHP and the ACPI core to be reduced too and makes further ACPI-based device hotplug consolidation possible. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| * | ACPI / hotplug / PCI: Define hotplug context lock in the coreRafael J. Wysocki2014-02-051-26/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | Subsequent changes will require the ACPI core to acquire the lock protecting the ACPIPHP hotplug contexts, so move the definition of the lock to the core and change its name to be more generic. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
| * | ACPI / hotplug / PCI: Do not pass ACPI handle to hotplug_event()Rafael J. Wysocki2014-02-051-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since hotplug_event() can get the ACPI handle needed for debug printouts from its context argument, there's no need to pass the handle to it. Moreover, the second argument's type may be changed to (struct acpiphp_context *), because that's what is always passed to hotplug_event() as the second argument anyway. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
| * | ACPI / hotplug / PCI: Use acpi_handle_debug() in hotplug_event()Rafael J. Wysocki2014-02-051-9/+3
| | | | | | | | | | | | | | | | | | | | | | | | Make hotplug_event() use acpi_handle_debug() instead of an open-coded debug message printing and clean up the messages printed by it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
| * | ACPI / hotplug / PCI: Simplify hotplug_event()Rafael J. Wysocki2014-02-051-13/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | A few lines of code can be cut from hotplug_event() by defining and initializing the slot variable at the top of the function, so do that. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
| * | ACPI / hotplug / PCI: Drop crit_sect lockingRafael J. Wysocki2014-02-051-20/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After recent PCI core changes related to the rescan/remove locking, the code sections under crit_sect mutexes from ACPIPHP slot objects are always executed under the general PCI rescan/remove lock. For this reason, the crit_sect mutexes are simply redundant, so drop them. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
| * | ACPI / hotplug / PCI: Drop acpiphp_bus_add()Rafael J. Wysocki2014-02-051-16/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | acpiphp_bus_add() is only called from one place, so move the code out of it into that place and drop it. Also make that code use func_to_acpi_device() to get the struct acpi_device pointer it needs instead of calling acpi_bus_get_device() which may be costly. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
| * | ACPI / hotplug / PCI: Store acpi_device pointer in acpiphp_contextRafael J. Wysocki2014-02-051-24/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After recent modifications of the ACPI core making it create a struct acpi_device object for every namespace node representing a device regardless of the current status of that device the ACPIPHP code can store a struct acpi_device pointer instead of an ACPI handle in struct acpiphp_context. This immediately makes it possible to avoid making potentially costly calls to acpi_bus_get_device() in two places and allows some more simplifications to be made going forward. The reason why that is correct is because ACPIPHP only installs hotify handlers for namespace nodes that exist when acpiphp_enumerate_slots() is called for their parent bridge. That only happens if the parent bridge has an ACPI companion associated with it, which means that the ACPI namespace scope in question has been scanned already at that point. That, in turn, means that struct acpi_device objects have been created for all namespace nodes in that scope and pointers to those objects can be stored directly instead of their ACPI handles. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
| * | ACPI / hotplug / PCI: Rework acpiphp_no_hotplug()Rafael J. Wysocki2014-02-051-10/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a struct acpi_device pointer is passed to acpiphp_no_hotplug() instead of an ACPI handle, the function won't need to call acpi_bus_get_device(), which may be costly, any more. Then, trim_stale_devices() can call acpiphp_no_hotplug() passing the struct acpi_device object it already has directly to that function. Make those changes and update slot_no_hotplug() accordingly. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
| * | ACPI / hotplug / PCI: Drop acpiphp_bus_trim()Rafael J. Wysocki2014-02-051-19/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If trim_stale_devices() calls acpi_bus_trim() directly, we can save a potentially costly acpi_bus_get_device() invocation. After making that change acpiphp_bus_trim() would only be called from one place, so move the code from it to that place and drop it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
| * | ACPI / hotplug / PCI: Simplify register_slot()Rafael J. Wysocki2014-02-051-8/+4
| | | | | | | | | | | | | | | | | | | | | | | | The err label in register_slot() is only jumped to from one place, so move the code under the label to that place and drop the label. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
| * | ACPI / hotplug / PCI: Proper kerneldoc comments for enumeration/removalRafael J. Wysocki2014-02-051-4/+10
| | | | | | | | | | | | | | | | | | | | | | | | Add proper kerneldoc comments describing acpiphp_enumerate_slots() and acpiphp_remove_slots(). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
| * | ACPI / hotplug / PCI: Simplify disable_slot()Rafael J. Wysocki2014-02-051-23/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After recent PCI core changes related to the rescan/remove locking, the ACPIPHP's disable_slot() function is only called under the general PCI rescan/remove lock, so it doesn't have to use dev_in_slot() any more to avoid race conditions. Make it simply walk the devices on the bus and drop the ones in the slot being disabled and drop dev_in_slot() which has no more users. Moreover, to avoid problems described in the changelog of commit 29ed1f29b68a (PCI: pciehp: Fix null pointer deref when hot-removing SR-IOV device), make disable_slot() carry out the list walk in reverse order. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* | | ACPI / hotplug / PCI: Relax the checking of _STA return valuesMika Westerberg2014-02-121-2/+13
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ACPI specification (ACPI 5.0A, Section 6.3.7) says: _STA may return bit 0 clear (not present) with bit 3 set (device is functional). This case is used to indicate a valid device for which no device driver should be loaded (for example, a bridge device.) Children of this device may be present and valid. OSPM should continue enumeration below a device whose _STA returns this bit combination. Evidently, some BIOSes follow that and return 0x0A from _STA, which causes problems to happen when they trigger bus check or device check notifications for those devices too. Namely, ACPIPHP thinks that they are gone and may drop them, for example, if such a notification is triggered during a resume from system suspend. To fix that, modify ACPICA to regard devies as present and functioning if _STA returns both the ACPI_STA_DEVICE_ENABLED and ACPI_STA_DEVICE_FUNCTIONING bits set for them. Reported-and-tested-by: Peter Wu <lekensteyn@gmail.com> Cc: 3.12+ <stable@vger.kernel.org> # 3.12+ [rjw: Subject and changelog, minor code modifications] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | ACPI / hotplug / PCI: Fix bridge removal race vs dock eventsRafael J. Wysocki2014-02-031-1/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a PCI bridge with an ACPIPHP context attached is removed via sysfs, the code path executed as a result is the following: pci_stop_and_remove_bus_device_locked pci_remove_bus pcibios_remove_bus acpi_pci_remove_bus acpiphp_remove_slots cleanup_bridge unregister_hotplug_dock_device (drops dock references to the bridge) put_bridge free_bridge acpiphp_put_context (for each child, under context lock) kfree (context) Now, if a dock event affecting one of the bridge's child devices occurs (roughly at the same time), it will lead to the following code path: acpi_dock_deferred_cb dock_notify handle_eject_request hot_remove_dock_devices dock_hotplug_event hotplug_event (dereferences context) That may lead to a kernel crash in hotplug_event() if it is executed after the last kfree() in the bridge removal code path. To prevent that from happening, add a wrapper around hotplug_event() called dock_event() and point the .handler pointer in acpiphp_dock_ops to it. Make that wrapper retrieve the device's ACPIPHP context using acpiphp_get_context() (instead of taking it from the data argument) under acpiphp_context_lock and check if the parent bridge's is_going_away flag is set. If that flag is set, it will return immediately and if it is not set it will grab a reference to the device's parent bridge before executing hotplug_event(). Then, in the above scenario, the reference to the parent bridge held by dock_event() will prevent free_bridge() from being executed for it until hotplug_event() returns. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | ACPI / hotplug / PCI: Fix bridge removal race in handle_hotplug_event()Rafael J. Wysocki2014-02-031-4/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a PCI bridge with an ACPIPHP context attached is removed via sysfs, the code path executed as a result is the following: pci_stop_and_remove_bus_device_locked pci_remove_bus pcibios_remove_bus acpi_pci_remove_bus acpiphp_remove_slots cleanup_bridge put_bridge free_bridge acpiphp_put_context (for each child, under context lock) kfree (child context) Now, if a hotplug notify is dispatched for one of the bridge's children and the timing is such that handle_hotplug_event() for that notify is executed while free_bridge() above is running, the get_bridge(context->func.parent) in handle_hotplug_event() will not really help, because it is too late to prevent the bridge from going away and the child's context may be freed before hotplug_event_work() scheduled from handle_hotplug_event() dereferences the pointer to it passed via the data argument. That will cause a kernel crash to happpen in hotplug_event_work(). To prevent that from happening, make handle_hotplug_event() check the is_going_away flag of the function's parent bridge (under acpiphp_context_lock) and bail out if it's set. Also, make cleanup_bridge() set the bridge's is_going_away flag under acpiphp_context_lock so that it cannot be changed between the check and the subsequent get_bridge(context->func.parent) in handle_hotplug_event(). Then, in the above scenario, handle_hotplug_event() will notice that context->func.parent->is_going_away is already set and it will exit immediately preventing the crash from happening. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | ACPI / hotplug / PCI: Scan root bus under the PCI rescan-remove lockRafael J. Wysocki2014-02-031-0/+4
| | | | | | | | | | | | | | | | | | Since acpiphp_check_bridge() called by acpiphp_check_host_bridge() does things that require PCI rescan-remove locking around it, make acpiphp_check_host_bridge() use that locking. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* | ACPI / hotplug / PCI: Move PCI rescan-remove locking to hotplug_event()Rafael J. Wysocki2014-02-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 9217a984671e (ACPI / hotplug / PCI: Use global PCI rescan-remove locking) modified ACPIPHP to protect its PCI device removal and addition code paths from races against sysfs-driven rescan and remove operations with the help of PCI rescan-remove locking. However, it overlooked the fact that hotplug_event_work() is not the only caller of hotplug_event() which may also be called by dock_hotplug_event() and that code path is missing the PCI rescan-remove locking. This means that, although the PCI rescan-remove lock is held as appropriate during the handling of events originating from handle_hotplug_event(), the ACPIPHP's operations resulting from dock events may still suffer the race conditions that commit 9217a984671e was supposed to eliminate. To address that problem, move the PCI rescan-remove locking from hotplug_event_work() to hotplug_event() so that it is used regardless of the way that function is invoked. Revamps: 9217a984671e (ACPI / hotplug / PCI: Use global PCI rescan-remove locking) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* | ACPI / hotplug / PCI: Remove entries from bus->devices in reverse orderRafael J. Wysocki2014-02-031-4/+4
|/ | | | | | | | | | | | | | | According to the changelog of commit 29ed1f29b68a (PCI: pciehp: Fix null pointer deref when hot-removing SR-IOV device) it is unsafe to walk the bus->devices list of a PCI bus and remove devices from it in direct order, because that may lead to NULL pointer dereferences related to virtual functions. For this reason, change all of the bus->devices list walks in acpiphp_glue.c during which devices may be removed to be carried out in reverse order. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* Merge tag 'pm+acpi-3.14-rc1' of ↵Linus Torvalds2014-01-241-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "As far as the number of commits goes, the top spot belongs to ACPI this time with cpufreq in the second position and a handful of PM core, PNP and cpuidle updates. They are fixes and cleanups mostly, as usual, with a couple of new features in the mix. The most visible change is probably that we will create struct acpi_device objects (visible in sysfs) for all devices represented in the ACPI tables regardless of their status and there will be a new sysfs attribute under those objects allowing user space to check that status via _STA. Consequently, ACPI device eject or generally hot-removal will not delete those objects, unless the table containing the corresponding namespace nodes is unloaded, which is extremely rare. Also ACPI container hotplug will be handled quite a bit differently and cpufreq will support CPU boost ("turbo") generically and not only in the acpi-cpufreq driver. Specifics: - ACPI core changes to make it create a struct acpi_device object for every device represented in the ACPI tables during all namespace scans regardless of the current status of that device. In accordance with this, ACPI hotplug operations will not delete those objects, unless the underlying ACPI tables go away. - On top of the above, new sysfs attribute for ACPI device objects allowing user space to check device status by triggering the execution of _STA for its ACPI object. From Srinivas Pandruvada. - ACPI core hotplug changes reducing code duplication, integrating the PCI root hotplug with the core and reworking container hotplug. - ACPI core simplifications making it use ACPI_COMPANION() in the code "glueing" ACPI device objects to "physical" devices. - ACPICA update to upstream version 20131218. This adds support for the DBG2 and PCCT tables to ACPICA, fixes some bugs and improves debug facilities. From Bob Moore, Lv Zheng and Betty Dall. - Init code change to carry out the early ACPI initialization earlier. That should allow us to use ACPI during the timekeeping initialization and possibly to simplify the EFI initialization too. From Chun-Yi Lee. - Clenups of the inclusions of ACPI headers in many places all over from Lv Zheng and Rashika Kheria (work in progress). - New helper for ACPI _DSM execution and rework of the code in drivers that uses _DSM to execute it via the new helper. From Jiang Liu. - New Win8 OSI blacklist entries from Takashi Iwai. - Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun Guo, Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava, Rashika Kheria, Tang Chen, Zhang Rui. - intel_pstate driver updates, including proper Baytrail support, from Dirk Brandewie and intel_pstate documentation from Ramkumar Ramachandra. - Generic CPU boost ("turbo") support for cpufreq from Lukasz Majewski. - powernow-k6 cpufreq driver fixes from Mikulas Patocka. - cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark Brown. - Assorted cpufreq drivers fixes and cleanups from Anson Huang, John Tobias, Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh Kumar. - cpuidle cleanups from Bartlomiej Zolnierkiewicz. - Support for hibernation APM events from Bin Shi. - Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC disabled during thaw transitions from Bjørn Mork. - PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf Hansson. - PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente Kurusa, Rashika Kheria. - New tool for profiling system suspend from Todd E Brandt and a cpupower tool cleanup from One Thousand Gnomes" * tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (153 commits) thermal: exynos: boost: Automatic enable/disable of BOOST feature (at Exynos4412) cpufreq: exynos4x12: Change L0 driver data to CPUFREQ_BOOST_FREQ Documentation: cpufreq / boost: Update BOOST documentation cpufreq: exynos: Extend Exynos cpufreq driver to support boost cpufreq / boost: Kconfig: Support for software-managed BOOST acpi-cpufreq: Adjust the code to use the common boost attribute cpufreq: Add boost frequency support in core intel_pstate: Add trace point to report internal state. cpufreq: introduce cpufreq_generic_get() routine ARM: SA1100: Create dummy clk_get_rate() to avoid build failures cpufreq: stats: create sysfs entries when cpufreq_stats is a module cpufreq: stats: free table and remove sysfs entry in a single routine cpufreq: stats: remove hotplug notifiers cpufreq: stats: handle cpufreq_unregister_driver() and suspend/resume properly cpufreq: speedstep: remove unused speedstep_get_state platform: introduce OF style 'modalias' support for platform bus PM / tools: new tool for suspend/resume performance optimization ACPI: fix module autoloading for ACPI enumerated devices ACPI: add module autoloading support for ACPI enumerated devices ACPI: fix create_modalias() return value handling ...
| * Merge branch 'acpi-pci-hotplug' into acpi-hotplugRafael J. Wysocki2013-12-311-3/+23
| |\ | | | | | | | | | | | | Conflicts: include/acpi/acpi_bus.h
| * \ Merge branch 'acpi-pci-hotplug' into acpi-hotplugRafael J. Wysocki2013-11-281-1/+3
| |\ \
| * | | ACPI / scan: Add acpi_device objects for all device nodes in the namespaceRafael J. Wysocki2013-11-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modify the ACPI namespace scanning code to register a struct acpi_device object for every namespace node representing a device, processor and so on, even if the device represented by that namespace node is reported to be not present and not functional by _STA. There are multiple reasons to do that. First of all, it avoids quite a lot of overhead when struct acpi_device objects are deleted every time acpi_bus_trim() is run and then added again by a subsequent acpi_bus_scan() for the same scope, although the namespace objects they correspond to stay in memory all the time (which always is the case on a vast majority of systems). Second, it will allow user space to see that there are namespace nodes representing devices that are not present at the moment and may be added to the system. It will also allow user space to evaluate _SUN for those nodes to check what physical slots the "missing" devices may be put into and it will make sense to add a sysfs attribute for _STA evaluation after this change (that will be useful for thermal management on some systems). Next, it will help to consolidate the ACPI hotplug handling among subsystems by making it possible to store hotplug-related information in struct acpi_device objects in a standard common way. Finally, it will help to avoid a race condition related to the deletion of ACPI namespace nodes. Namely, namespace nodes may be deleted as a result of a table unload triggered by _EJ0 or _DCK. If a hotplug notification for one of those nodes is triggered right before the deletion and it executes a hotplug callback via acpi_hotplug_execute(), the ACPI handle passed to that callback may be stale when the callback actually runs. One way to work around that is to always pass struct acpi_device pointers to hotplug callbacks after doing a get_device() on the objects in question which eliminates the use-after-free possibility (the ACPI handles in those objects are invalidated by acpi_scan_drop_device(), so they will trigger ACPICA errors on attempts to use them). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* | | | Merge tag 'pci-v3.14-changes' of ↵Linus Torvalds2014-01-221-5/+38
|\ \ \ \ | |_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for the v3.14 merge window: Resource management - Change pci_bus_region addresses to dma_addr_t (Bjorn Helgaas) - Support 64-bit AGP BARs (Bjorn Helgaas, Yinghai Lu) - Add pci_bus_address() to get bus address of a BAR (Bjorn Helgaas) - Use pci_resource_start() for CPU address of AGP BARs (Bjorn Helgaas) - Enforce bus address limits in resource allocation (Yinghai Lu) - Allocate 64-bit BARs above 4G when possible (Yinghai Lu) - Convert pcibios_resource_to_bus() to take pci_bus, not pci_dev (Yinghai Lu) PCI device hotplug - Major rescan/remove locking update (Rafael J. Wysocki) - Make ioapic builtin only (not modular) (Yinghai Lu) - Fix release/free issues (Yinghai Lu) - Clean up pciehp (Bjorn Helgaas) - Announce pciehp slot info during enumeration (Bjorn Helgaas) MSI - Add pci_msi_vec_count(), pci_msix_vec_count() (Alexander Gordeev) - Add pci_enable_msi_range(), pci_enable_msix_range() (Alexander Gordeev) - Deprecate "tri-state" interfaces: fail/success/fail+info (Alexander Gordeev) - Export MSI mode using attributes, not kobjects (Greg Kroah-Hartman) - Drop "irq" param from *_restore_msi_irqs() (DuanZhenzhong) SR-IOV - Clear NumVFs when disabling SR-IOV in sriov_init() (ethan.zhao) Virtualization - Add support for save/restore of extended capabilities (Alex Williamson) - Add Virtual Channel to save/restore support (Alex Williamson) - Never treat a VF as a multifunction device (Alex Williamson) - Add pci_try_reset_function(), et al (Alex Williamson) AER - Ignore non-PCIe error sources (Betty Dall) - Support ACPI HEST error sources for domains other than 0 (Betty Dall) - Consolidate HEST error source parsers (Bjorn Helgaas) - Add a TLP header print helper (Borislav Petkov) Freescale i.MX6 - Remove unnecessary code (Fabio Estevam) - Make reset-gpio optional (Marek Vasut) - Report "link up" only after link training completes (Marek Vasut) - Start link in Gen1 before negotiating for Gen2 mode (Marek Vasut) - Fix PCIe startup code (Richard Zhu) Marvell MVEBU - Remove duplicate of_clk_get_by_name() call (Andrew Lunn) - Drop writes to bridge Secondary Status register (Jason Gunthorpe) - Obey bridge PCI_COMMAND_MEM and PCI_COMMAND_IO bits (Jason Gunthorpe) - Support a bridge with no IO port window (Jason Gunthorpe) - Use max_t() instead of max(resource_size_t,) (Jingoo Han) - Remove redundant of_match_ptr (Sachin Kamat) - Call pci_ioremap_io() at startup instead of dynamically (Thomas Petazzoni) NVIDIA Tegra - Disable Gen2 for Tegra20 and Tegra30 (Eric Brower) Renesas R-Car - Add runtime PM support (Valentine Barshak) - Fix rcar_pci_probe() return value check (Wei Yongjun) Synopsys DesignWare - Fix crash in dw_msi_teardown_irq() (Bjørn Erik Nilsen) - Remove redundant call to pci_write_config_word() (Bjørn Erik Nilsen) - Fix missing MSI IRQs (Harro Haan) - Add dw_pcie prefix before cfg_read/write (Pratyush Anand) - Fix I/O transfers by using CPU (not realio) address (Pratyush Anand) - Whitespace cleanup (Jingoo Han) EISA - Call put_device() if device_register() fails (Levente Kurusa) - Revert EISA initialization breakage ((Bjorn Helgaas) Miscellaneous - Remove unused code, including PCIe 3.0 interfaces (Stephen Hemminger) - Prevent bus conflicts while checking for bridge apertures (Bjorn Helgaas) - Stop clearing bridge Secondary Status when setting up I/O aperture (Bjorn Helgaas) - Use dev_is_pci() to identify PCI devices (Yijing Wang) - Deprecate DEFINE_PCI_DEVICE_TABLE (Joe Perches) - Update documentation 00-INDEX (Erik Ekman)" * tag 'pci-v3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (119 commits) Revert "EISA: Initialize device before its resources" Revert "EISA: Log device resources in dmesg" vfio-pci: Use pci "try" reset interface PCI: Check parent kobject in pci_destroy_dev() xen/pcifront: Use global PCI rescan-remove locking powerpc/eeh: Use global PCI rescan-remove locking PCI: Fix pci_check_and_unmask_intx() comment typos PCI: Add pci_try_reset_function(), pci_try_reset_slot(), pci_try_reset_bus() MPT / PCI: Use pci_stop_and_remove_bus_device_locked() platform / x86: Use global PCI rescan-remove locking PCI: hotplug: Use global PCI rescan-remove locking pcmcia: Use global PCI rescan-remove locking ACPI / hotplug / PCI: Use global PCI rescan-remove locking ACPI / PCI: Use global PCI rescan-remove locking in PCI root hotplug PCI: Add global pci_lock_rescan_remove() PCI: Cleanup pci.h whitespace PCI: Reorder so actual code comes before stubs PCI/AER: Support ACPI HEST AER error sources for PCI domains other than 0 ACPICA: Add helper macros to extract bus/segment numbers from HEST table. PCI: Make local functions static ...
| * | | ACPI / hotplug / PCI: Use global PCI rescan-remove lockingRafael J. Wysocki2014-01-141-5/+38
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Multiple race conditions are possible between the ACPI-based PCI hotplug (ACPIPHP) and the generic PCI bus rescan and device removal that can be triggered via sysfs. To avoid those race conditions make the ACPIPHP code use global PCI rescan-remove locking. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | | ACPIPHP / radeon / nouveau: Fix VGA switcheroo problem related to hotplugRafael J. Wysocki2013-12-311-3/+23
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The changes in the ACPI-based PCI hotplug (ACPIPHP) subsystem made during the 3.12 development cycle uncovered a problem with VGA switcheroo that on some systems, when the device-specific method (ATPX in the radeon case, _DSM in the nouveau case) is used to turn off the discrete graphics, the BIOS generates ACPI hotplug events for that device and those events cause ACPIPHP to attempt to remove the device from the system (they are events for a device that was present previously and is not present any more, so that's what should be done according to the spec). Then, the system stops functioning correctly. Since the hotplug events in question were simply silently ignored previously, the least intrusive way to address that problem is to make ACPIPHP ignore them again. For this purpose, introduce a new ACPI device flag, no_hotplug, and modify ACPIPHP to ignore hotplug events for PCI devices whose ACPI companions have that flag set. Next, make the radeon and nouveau switcheroo detection code set the no_hotplug flag for the discrete graphics' ACPI companion. Fixes: bbd34fcdd1b2 (ACPI / hotplug / PCI: Register all devices under the given bridge) References: https://bugzilla.kernel.org/show_bug.cgi?id=61891 References: https://bugzilla.kernel.org/show_bug.cgi?id=64891 Reported-and-tested-by: Mike Lothian <mike@fireburn.co.uk> Reported-and-tested-by: <madcatx@atlas.cz> Reported-and-tested-by: Joaquín Aramendía <samsagax@gmail.com> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 3.12+ <stable@vger.kernel.org> # 3.12+
* | ACPI / PCI / hotplug: Avoid warning when _ADR not presentToshi Kani2013-11-281-1/+3
|/ | | | | | | | | | | | | | | | acpiphp_enumerate_slots() walks ACPI namenamespace under a PCI host bridge with callback register_slot(). register_slot() evaluates _ADR for all the device objects and emits a warning message for any error. Some platforms have _HID device objects (such as HPET and IPMI), which trigger unnecessary warning messages. This patch avoids emitting a warning message when a target device object does not have _ADR. Signed-off-by: Toshi Kani <toshi.kani@hp.com> Cc: 3.12+ <stable@vger.kernel.org> # 3.12+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* PCI: Fix whitespace, capitalization, and spelling errorsBjorn Helgaas2013-11-141-1/+1
| | | | | | | | | Fix whitespace, capitalization, and spelling errors. No functional change. I know "busses" is not an error, but "buses" was more common, so I used it consistently. Signed-off-by: Marta Rybczynska <rybczynska@gmail.com> (pci_reset_bridge_secondary_bus()) Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* Merge tag 'pci-v3.13-changes' of ↵Linus Torvalds2013-11-141-11/+12
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "Resource management - Fix host bridge window coalescing (Alexey Neyman) - Pass type, width, and prefetchability for window alignment (Wei Yang) PCI device hotplug - Convert acpiphp, acpiphp_ibm to dynamic debug (Lan Tianyu) Power management - Remove pci_pm_complete() (Liu Chuansheng) MSI - Fail initialization if device is not in PCI_D0 (Yijing Wang) MPS (Max Payload Size) - Use pcie_get_mps() and pcie_set_mps() to simplify code (Yijing Wang) - Use pcie_set_readrq() to simplify code (Yijing Wang) - Use cached pci_dev->pcie_mpss to simplify code (Yijing Wang) SR-IOV - Enable upstream bridges even for VFs on virtual buses (Bjorn Helgaas) - Use pci_is_root_bus() to avoid catching virtual buses (Wei Yang) Virtualization - Add x86 MSI masking ops (Konrad Rzeszutek Wilk) Freescale i.MX6 - Support i.MX6 PCIe controller (Sean Cross) - Increase link startup timeout (Marek Vasut) - Probe PCIe in fs_initcall() (Marek Vasut) - Fix imprecise abort handler (Tim Harvey) - Remove redundant of_match_ptr (Sachin Kamat) Renesas R-Car - Support Gen2 internal PCIe controller (Valentine Barshak) Samsung Exynos - Add MSI support (Jingoo Han) - Turn off power when link fails (Jingoo Han) - Add Jingoo Han as maintainer (Jingoo Han) - Add clk_disable_unprepare() on error path (Wei Yongjun) - Remove redundant of_match_ptr (Sachin Kamat) Synopsys DesignWare - Add irq_create_mapping() (Pratyush Anand) - Add header guards (Seungwon Jeon) Miscellaneous - Enable native PCIe services by default on non-ACPI (Andrew Murray) - Cleanup _OSC usage and messages (Bjorn Helgaas) - Remove pcibios_last_bus boot option on non-x86 (Bjorn Helgaas) - Convert bus code to use bus_, drv_, and dev_groups (Greg Kroah-Hartman) - Remove unused pci_mem_start (Myron Stowe) - Make sysfs functions static (Sachin Kamat) - Warn on invalid return from driver probe (Stephen M. Cameron) - Remove Intel Haswell D3 delays (Todd E Brandt) - Call pci_set_master() in core if driver doesn't do it (Yinghai Lu) - Use pci_is_pcie() to simplify code (Yijing Wang) - Use PCIe capability accessors to simplify code (Yijing Wang) - Use cached pci_dev->pcie_cap to simplify code (Yijing Wang) - Removed unused "is_pcie" from struct pci_dev (Yijing Wang) - Simplify sysfs CPU affinity implementation (Yijing Wang)" * tag 'pci-v3.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (79 commits) PCI: Enable upstream bridges even for VFs on virtual buses PCI: Add pci_upstream_bridge() PCI: Add x86_msi.msi_mask_irq() and msix_mask_irq() PCI: Warn on driver probe return value greater than zero PCI: Drop warning about drivers that don't use pci_set_master() PCI: Workaround missing pci_set_master in pci drivers powerpc/pci: Use pci_is_pcie() to simplify code [fix] PCI: Update pcie_ports 'auto' behavior for non-ACPI platforms PCI: imx6: Probe the PCIe in fs_initcall() PCI: Add R-Car Gen2 internal PCI support PCI: imx6: Remove redundant of_match_ptr PCI: Report pci_pme_active() kmalloc failure mn10300/PCI: Remove useless pcibios_last_bus frv/PCI: Remove pcibios_last_bus PCI: imx6: Increase link startup timeout PCI: exynos: Remove redundant of_match_ptr PCI: imx6: Fix imprecise abort handler PCI: Fail MSI/MSI-X initialization if device is not in PCI_D0 PCI: imx6: Remove redundant dev_err() in imx6_pcie_probe() x86/PCI: Coalesce multiple overlapping host bridge windows ...
OpenPOWER on IntegriCloud