summaryrefslogtreecommitdiffstats
path: root/drivers/net
Commit message (Collapse)AuthorAgeFilesLines
* ARM: 5865/1: nuc900 ethernet driver needs miiLi Jie2010-01-051-0/+1
| | | | | | | | nuc900 ethernet driver uses mii_xx_xx serials api, so mii module should be selected. Signed-off-by: lijie <eltshanli@gmail.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2009-12-3074-799/+770
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (74 commits) Revert "b43: Enforce DMA descriptor memory constraints" iwmc3200wifi: fix array out-of-boundary access wl1251: timeout one too soon in wl1251_boot_run_firmware() mac80211: fix propagation of failed hardware reconfigurations mac80211: fix race with suspend and dynamic_ps_disable_work ath9k: fix missed error codes in the tx status check ath9k: wake hardware during AMPDU TX actions ath9k: wake hardware for interface IBSS/AP/Mesh removal ath9k: fix suspend by waking device prior to stop cfg80211: fix error path in cfg80211_wext_siwscan wl1271_cmd.c: cleanup char => u8 iwlwifi: Storage class should be before const qualifier ath9k: Storage class should be before const qualifier cfg80211: fix race between deauth and assoc response wireless: remove remaining qual code rt2x00: Add USB ID for Linksys WUSB 600N rev 2. ath5k: fix SWI calibration interrupt storm mac80211: fix ibss join with fixed-bssid libertas: Remove carrier signaling from the scan code orinoco: fix GFP_KERNEL in orinoco_set_key with interrupts disabled ...
| * Merge branch 'master' of ↵David S. Miller2009-12-2923-441/+89
| |\ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
| | * Revert "b43: Enforce DMA descriptor memory constraints"John W. Linville2009-12-292-158/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 9bd568a50c446433038dec2a5186c5c57c3dbd23. That commit is shown to cause allocation failures during initialization on some machines. http://bugzilla.kernel.org/show_bug.cgi?id=14844 Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * iwmc3200wifi: fix array out-of-boundary accessZhu Yi2009-12-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Allocate priv->rx_packets[IWM_RX_ID_HASH + 1] because the max array index is IWM_RX_ID_HASH according to IWM_RX_ID_GET_HASH(). Cc: stable@kernel.org Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * wl1251: timeout one too soon in wl1251_boot_run_firmware()Roel Kluin2009-12-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | `loop' reaches INIT_LOOP + 1 after the loop. so if ACX_INTR_INIT_COMPLETE occurs in the last iteration the write occurs but also the error out as if a timeout occurred. This is probably very unlikely to ever occur. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * ath9k: fix missed error codes in the tx status checkFelix Fietkau2009-12-282-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | My previous change added in: commit 815833e7ecf0b9a017315cae6aef4d7cd9517681 ath9k: fix tx status reporting was not checking all possible tx error conditions. This could possibly lead to throughput issues due to slow rate control adaption or missed retransmissions of failed A-MPDU frames. This patch adds a mask for all possible error conditions and uses it in the xmit ok check. Cc: stable@kernel.org Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * ath9k: wake hardware during AMPDU TX actionsLuis R. Rodriguez2009-12-281-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | AMDPDU actions poke hardware for TX operation, as such we want to turn hardware on for these actions. AMDPU RX operations do not require hardware on as nothing is done in hardware for those actions. Without this we cannot guarantee hardware has been programmed correctly for each AMPDU TX action. Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * ath9k: wake hardware for interface IBSS/AP/Mesh removalLuis R. Rodriguez2009-12-281-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we remove a IBSS/AP/Mesh interface we stop DMA but to do this we should ensure hardware is on. Awaken the device prior to these calls. This should ensure DMA is stopped upon suspend and plain device removal. Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * ath9k: fix suspend by waking device prior to stopSujith2009-12-281-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ensure the device is awake prior to trying to tell hardware to stop it. Impact of not doing this is we can likely leave the device in an undefined state likely causing issues with suspend and resume. This patch ensures harware is where it should be prior to suspend. Cc: stable@kernel.org Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * wl1271_cmd.c: cleanup char => u8Dan Carpenter2009-12-281-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | This is just a clean up and doesn't make a functional difference. It keeps the lint checkers happy. Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * iwlwifi: Storage class should be before const qualifierTobias Klauser2009-12-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * ath9k: Storage class should be before const qualifierTobias Klauser2009-12-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * wireless: remove remaining qual codeJohannes Berg2009-12-2810-255/+4
| | | | | | | | | | | | | | | | | | | | | | | | This removes the remaining users of the rx status 'qual' field and the field itself. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * rt2x00: Add USB ID for Linksys WUSB 600N rev 2.Gertjan van Wingerde2009-12-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | This is a rt2870 based device. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * ath5k: fix SWI calibration interrupt stormBob Copeland2009-12-281-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The calibration period is now invoked by triggering a software interrupt from within the ISR by ath5k_hw_calibration_poll() instead of via a timer. However, the calibration interval isn't initialized before interrupts are enabled, so we can have a situation where an interrupt occurs before the interval is assigned, so the interval is actually negative. As a result, the ISR will arm a software interrupt to schedule the tasklet, and then rearm it when the SWI is processed, and so on, leading to a softlockup at modprobe time. Move the initialization order around so the calibration interval is set before interrupts are active. Another possible fix is to schedule the tasklet directly from the poll routine, but I think there are additional plans for the SWI. Signed-off-by: Bob Copeland <me@bobcopeland.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * libertas: Remove carrier signaling from the scan codeSamuel Ortiz2009-12-281-14/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | There is no reason to signal a carrier off when doing a 802.11 scan. Cc: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * orinoco: fix GFP_KERNEL in orinoco_set_key with interrupts disabledAndrey Borzenkov2009-12-281-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | orinoco_set_key is called from two places both with interrupts disabled (under orinoco_lock). Use GFP_ATOMIC instead of GFP_KERNEL. Fixes following warning: [ 77.254109] WARNING: at /home/bor/src/linux-git/kernel/lockdep.c:2465 lockdep_trace_alloc+0x9a/0xa0() [ 77.254109] Hardware name: PORTEGE 4000 [ 77.254109] Modules linked in: af_packet irnet ppp_generic slhc ircomm_tty ircomm binfmt_misc dm_mirror dm_region_hash dm_log dm_round_robin dm_multipath dm_mod loop nvram toshiba cryptomgr aead pcompress crypto_blkcipher michael_mic crypto_hash crypto_algapi orinoco_cs orinoco cfg80211 smsc_ircc2 pcmcia irda toshiba_acpi yenta_socket video i2c_ali1535 backlight rsrc_nonstatic ali_agp pcmcia_core psmouse output crc_ccitt i2c_core alim1535_wdt rfkill sg evdev ohci_hcd agpgart usbcore pata_ali libata reiserfs [last unloaded: scsi_wait_scan] [ 77.254109] Pid: 2296, comm: wpa_supplicant Not tainted 2.6.32-1avb #1 [ 77.254109] Call Trace: [ 77.254109] [<c011f0ad>] warn_slowpath_common+0x6d/0xa0 [ 77.254109] [<c014206a>] ? lockdep_trace_alloc+0x9a/0xa0 [ 77.254109] [<c014206a>] ? lockdep_trace_alloc+0x9a/0xa0 [ 77.254109] [<c011f0f5>] warn_slowpath_null+0x15/0x20 [ 77.254109] [<c014206a>] lockdep_trace_alloc+0x9a/0xa0 [ 77.254109] [<c018d296>] __kmalloc+0x36/0x130 [ 77.254109] [<dffcb6a8>] ? orinoco_set_key+0x48/0x1c0 [orinoco] [ 77.254109] [<dffcb6a8>] orinoco_set_key+0x48/0x1c0 [orinoco] [ 77.254109] [<dffcb9fc>] orinoco_ioctl_set_encodeext+0x1dc/0x2d0 [orinoco] [ 77.254109] [<c035b117>] ioctl_standard_call+0x207/0x3b0 [ 77.254109] [<dffcb820>] ? orinoco_ioctl_set_encodeext+0x0/0x2d0 [orinoco] [ 77.254109] [<c0307f1f>] ? rtnl_lock+0xf/0x20 [ 77.254109] [<c0307f1f>] ? rtnl_lock+0xf/0x20 [ 77.254109] [<c02fb115>] ? __dev_get_by_name+0x85/0xb0 [ 77.254109] [<c035b616>] wext_handle_ioctl+0x176/0x200 [ 77.254109] [<dffcb820>] ? orinoco_ioctl_set_encodeext+0x0/0x2d0 [orinoco] [ 77.254109] [<c030020f>] dev_ioctl+0x6af/0x730 [ 77.254109] [<c02eec65>] ? move_addr_to_kernel+0x55/0x60 [ 77.254109] [<c02eed59>] ? sys_sendto+0xe9/0x130 [ 77.254109] [<c02ed77e>] sock_ioctl+0x7e/0x250 [ 77.254109] [<c02ed700>] ? sock_ioctl+0x0/0x250 [ 77.254109] [<c019cf4c>] vfs_ioctl+0x1c/0x70 [ 77.254109] [<c019d1fa>] do_vfs_ioctl+0x6a/0x590 [ 77.254109] [<c0178e50>] ? might_fault+0x90/0xa0 [ 77.254109] [<c0178e0a>] ? might_fault+0x4a/0xa0 [ 77.254109] [<c02ef90e>] ? sys_socketcall+0x17e/0x280 [ 77.254109] [<c019d759>] sys_ioctl+0x39/0x60 [ 77.254109] [<c0102e3b>] sysenter_do_call+0x12/0x32 [ 77.254109] ---[ end trace 95ef563548d21efd ]--- Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | bond_3ad.c avoid possible null derefDan Carpenter2009-12-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | A few lines earlier we assume that best->slave could be either null or non-null so we should check it here as well. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Fix MAC address access in 3c507, ibmlana, pcnet32 and libertasDaniel Drake2009-12-264-6/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit f001fde5eadd915f4858d22ed70d7040f48767cf changed net_device.dev_addr from a 32-byte array to a pointer. I found 4 ethernet drivers which rely on sizeof(dev_addr), which are now only copying 4 bytes of the address information on 32bit systems. Fix them to use ETH_ALEN. Signed-off-by: Daniel Drake <dsd@laptop.org> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | gianfar: Fix gianfar select_queue bogositySandeep Gopalpet2009-12-261-9/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The gfar_select_queue() function was used to set queue mapping only for forwarding/bridging applications and the condition for locally generated packets was completely ignored. The solution is to remove the gfar_select_queue() function and use skb_record_rx_queue to set queue mapping for forwarding/bridging applications. This will ensure that in case of forwarding/bridging applications txq = rxq will be selected and skb_tx_hash will be used to pick up a txq for locally generated packets. Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | tun: use tun_sk instead container_ofVitaliy Gusev2009-12-261-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | Using macro tun_sk is more clear and shorter. However tun.c has tun_sk, but doesn't use it. Signed-off-by: Vitaliy Gusev <vgusev@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ucc_geth: Don't needlessly change MAC settings in adjust_link()Anton Vorontsov2009-12-261-15/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If PHY doesn't have an IRQ, phylib would poll for link changes, and would call adjust_link() every second. In that case we disable and enable the controller every second. Let's better check if there is actually anything changed, and, if so, change the MAC settings. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ucc_geth: Fix netdev watchdog triggering on link changesAnton Vorontsov2009-12-261-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 864fdf884e82bacbe8ca5e93bd43393a61d2e2b4 ("ucc_geth: Fix hangs after switching from full to half duplex") ucc_geth driver disables the controller during MAC configuration changes. Though, disabling the controller might take quite awhile, and so the netdev watchdog might get upset: NETDEV WATCHDOG: eth2 (ucc_geth): transmit queue 0 timed out ------------[ cut here ]------------ Badness at c02729a8 [verbose debug info unavailable] NIP: c02729a8 LR: c02729a8 CTR: c01b6088 REGS: c0451c40 TRAP: 0700 Not tainted (2.6.32-trunk-8360e) [...] NIP [c02729a8] dev_watchdog+0x280/0x290 LR [c02729a8] dev_watchdog+0x280/0x290 Call Trace: [c0451cf0] [c02729a8] dev_watchdog+0x280/0x290 (unreliable) [c0451d50] [c00377c4] run_timer_softirq+0x164/0x224 [c0451da0] [c0032a38] __do_softirq+0xb8/0x13c [c0451df0] [c00065cc] do_softirq+0xa0/0xac [c0451e00] [c003280c] irq_exit+0x7c/0x9c [c0451e10] [c00640c4] __ipipe_sync_stage+0x248/0x24c [...] This patch fixes the issue by detaching the netdev during the time we change the configuration. Reported-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Tested-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca> Cc: Stable <stable@vger.kernel.org> [2.6.32] Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ucc_geth: Fix empty TX queue processingAnton Vorontsov2009-12-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Following oops was seen with the ucc_geth driver: Unable to handle kernel paging request for data at address 0x00000058 Faulting instruction address: 0xc024f2fc Oops: Kernel access of bad area, sig: 11 [#1] [...] NIP [c024f2fc] skb_recycle_check+0x14/0x100 LR [e30aa0a4] ucc_geth_poll+0xd8/0x4e0 [ucc_geth_driver] Call Trace: [df857d50] [c000b03c] __ipipe_grab_irq+0x3c/0xa4 (unreliable) [df857d60] [e30aa0a4] ucc_geth_poll+0xd8/0x4e0 [ucc_geth_driver] [df857dd0] [c0258cf8] net_rx_action+0xf8/0x1b8 [df857e10] [c0032a38] __do_softirq+0xb8/0x13c [df857e60] [c00065cc] do_softirq+0xa0/0xac [...] This is because ucc_geth_tx() tries to process an empty queue when queues are logically stopped. Stopping the queues doesn't disable polling, and since nowadays ucc_geth_tx() is actually called from the polling routine, the oops above might pop up. Fix this by removing 'netif_queue_stopped() == 0' check. Reported-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Tested-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca> Cc: Stable <stable@vger.kernel.org> [2.6.32] Signed-off-by: David S. Miller <davem@davemloft.net>
| * | vxge: use DMA_BIT_MASK instead of plain values.Denis Kirjanov2009-12-251-3/+3
| | | | | | | | | | | | | | | | | | | | | Use DMA_BIT_MASK instead of plain values. Signed-off-by: Denis Kirjanov <kirjanov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | bnx2x: Initialize cnic status block during chip resetMichael Chan2009-12-251-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the device is reset during MTU change, ring size change, or self test, etc, the cnic status block needs to be properly initialized if cnic is registered. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/via-rhine: Fix scheduling while atomic bugsJarek Poplawski2009-12-231-13/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are BUGs "scheduling while atomic" triggered by the timer rhine_tx_timeout(). They are caused by calling napi_disable() (with msleep()). This patch fixes it by moving most of the timer content to the workqueue function (similarly to other drivers, like tg3), with spin_lock() changed to BH version. Additionally, there is spin_lock_irq() moved in rhine_close() to exclude napi_disable() etc., also tg3's way. Reported-by: Andrey Rahmatullin <wrar@altlinux.org> Tested-by: Andrey Rahmatullin <wrar@altlinux.org> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ixgbe: fix Need to call pci_save_state after pci_restore_stateDon Skidmore2009-12-231-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a pci_save_state() call in ixgbe_resume() after pci_restore_state(). A similar change was made in ixgbe_io_slot_reset() that accommodates pci_restore_state() new behavior. This change makes pci_restore_state() clear the saved_state flag This is necessary due to a resent kernel change to pci_restore_state() so that it now clears the saved_state flag of the device right after the device.s standard configuration registers have been poplulated with the previously saved values. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | be2net: Bug fix to return correct values in ethtool get_settings.Sarveshwar Bandi2009-12-232-9/+32
| | | | | | | | | | | | | | | | | | | | | | | | Changes to return correct values for transceiver and supported in ethtool get_settings function. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | be2net: Bug fix to config NIC appropriately before loopback testSarveshwar Bandi2009-12-233-14/+74
| | | | | | | | | | | | | | | | | | | | | | | | NIC controller has to be set to an appropriate mode before doing a loopback test. Test will fail otherwise. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | be2net: Bug fix to avoid soft lockup in loopback test.Sarveshwar Bandi2009-12-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | This change ensures that loopback test command gives up after 4 seconds when the hardware is not responsive. This could happen if the ports are connected properly in loopback mode. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | igbvf: Make igbvf error message more informativeWilliams, Mitch A2009-12-231-1/+2
| | | | | | | | | | | | | | | | | | Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | igb: check both function bits in status register in wol exceptionAlexander Duyck2009-12-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ethtool code for enabling Wake on Lan was not correctly checking the status register bits so as a result ports 0 and 2 were both being allowed to set WOL to enabled even though it is only supported on the first port for our adapters. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | igb: correctly offset 82575 flow control watermarks by 16 bytesAlexander Duyck2009-12-231-7/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The watermark values for the 82575 were not being set correctly. As a result the high and low watermark values were set to the same value which can lead to excess xon/xoff packets being generated. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | igb: do not force retry count to 1 on 82580 phyAlexander Duyck2009-12-231-9/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change resolves an issue seen in some configurations where the link may drop to 100Mb/s even though the link itself supports 1000Mb/s. The issue was root caused to the fact that we were only trying the link once. Now instead we will try up to 5 attempts on a faulty cable before downshifting to 100Mb/s. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | igb: do not force pcs link when in KX modeAlexander Duyck2009-12-231-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | We were forcing the PCS link up in error when we are in KX mode. We should only be disabling autoneg, not forcing the link up. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | sfc: Disable TX descriptor prefetch watchdogBen Hutchings2009-12-231-0/+2
| | | | | | | | | | | | | | | | | | | | | This hardware watchdog can misfire, so it does more harm than good. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | sfc: QT2025C: Add error message for suspected bad SFP+ cablesBen Hutchings2009-12-231-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | Some cables have EEPROMs that conflict with the PHY's on-board EEPROM so it cannot load firmware. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | sfc: QT2025C: Work around PHY firmware initialisation bugMatthew Slattery2009-12-231-8/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | The PHY's firmware very occasionally appears to lock up very early, but with the heartbeat update still running. Rebooting the microcontroller core seems to be sufficient to recover. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | sfc: QT2025C: Switch into self-configure mode when not in loopbackMatthew Slattery2009-12-231-0/+119
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PHY boots in a mode which is not necessarily optimal. This change switches it to self-configure mode (except when in loopback, which won't work in that mode if an SFP+ module is not present) by rebooting the PHY's microcontroller, and replicating the sequence of configuration writes from the boot EEPROM with the appropriate changes. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | sfc: QT2025C: Work around PHY bugMatthew Slattery2009-12-231-0/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | If we see the PHY remaining stuck in a link-down state due to PCS being down while PMA/PMD is up, we briefly switch to PMA/PMD loopback and back, which usually unsticks it. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | sfc: Fix DMA mapping cleanup in case of an error in TSONeil Turton2009-12-231-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | We need buffer->len to remain valid to work out the correct address to be unmapped. We therefore need to clear buffer->len after the unmap operation. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | sfc: Include XGXS in XMAC link status check except in XGMII loopbackBen Hutchings2009-12-231-16/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The XGXS block may not get a link immediately in XGXS or XAUI loopback modes, so we still need to check it. Split falcon_xaui_link_ok() into falcon_xgxs_link_ok(), which checks only the Falcon XGXS block, and falcon_xmac_link_ok(), which checks one or both sides of the link as appropriate. Also rename falcon_check_xaui_link() to falcon_xmac_link_ok_retry(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | sfc: Move PHY software state initialisation from init() into probe()Steve Hodgson2009-12-237-131/+129
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This prevents efx->link_advertising from being blatted during a reset. The phy_short_reach sysfs node is now destroyed later in the port shutdown process, so check for STATE_RUNNING after acquiring the rtnl_lock (just like in set_phy_flash_cfg). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Merge branch 'master' of ↵David S. Miller2009-12-2126-108/+121
| |\ \ | | |/ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
| | * ps3_gelic_wireless: Fix build failure due to missing WEXT_PRIVBenjamin Herrenschmidt2009-12-211-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | The option to support the old style PSK interface in the PS3 GELIC wireless drivers requires CONFIG_WEXT_PRIV to be set Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * mac80211: fix peer HT capabilitiesJohannes Berg2009-12-211-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I noticed yesterday, because Jeff had noticed a speed regression, cf. bug http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2138 that the SM PS settings for peers were wrong. Instead of overwriting the SM PS settings with the local bits, we need to keep the remote bits. The bug was part of the original HT code from over two years ago, but unfortunately nobody noticed that it makes no sense -- we shouldn't be overwriting the peer's setting with our own but rather keep it intact when masking the peer capabilities with our own. While fixing that, I noticed that the masking of capabilities is completely useless for most of the bits, so also fix those other bits. Finally, I also noticed that PSMP_SUPPORT no longer exists in the final 802.11n version, so also remove that. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * iwmc3200wifi: Fix test of unsigned in iwm_ntf_stop_resume_tx()Roel Kluin2009-12-213-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | `queue' was unsigned so the test did not work. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Reviewed-by: Pavel Roskin <proski@gnu.org> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * Libertas: fix buffer overflow in lbs_get_essid()Daniel Mack2009-12-211-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The libertas driver copies the SSID buffer back to the wireless core and appends a trailing NULL character for termination. This is a) unnecessary because the buffer is allocated with kzalloc and is hence already NULLed when this function is called, and b) for priv->curbssparams.ssid_len == 32, it writes back one byte too much which causes memory corruptions. Fix this by removing the extra write. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Maithili Hinge <maithili@marvell.com> Cc: Kiran Divekar <dkiran@marvell.com> Cc: Michael Hirsch <m.hirsch@raumfeld.com> Cc: netdev@vger.kernel.org Cc: libertas-dev@lists.infradead.org Cc: linux-wireless@lists.infradead.org Cc: stable@kernel.org Acked-by: Holger Schurig <holgerschurig@gmail.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
OpenPOWER on IntegriCloud