summaryrefslogtreecommitdiffstats
path: root/drivers/net
Commit message (Collapse)AuthorAgeFilesLines
* drivers/net: remove some rcu sparse warningsEric Dumazet2011-01-278-25/+40
| | | | | | | | | | Add missing __rcu annotations and helpers. minor : Fix some rcu_dereference() calls in macvtap Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2011-01-275-24/+106
|\ | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
| * dl2k: nulify fraginfo after unmapStanislaw Gruszka2011-01-271-2/+2
| | | | | | | | | | | | | | | | | | | | Patch fixes: "DMA-API: device driver tries to free an invalid DMA memory address" warning reported here: https://bugzilla.redhat.com/show_bug.cgi?id=639824 Reported-by: Frantisek Hanzlik <franta@hanzlici.cz> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * xen: netfront: handle incoming GSO SKBs which are not CHECKSUM_PARTIALIan Campbell2011-01-271-8/+88
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Linux network stack expects all GSO SKBs to have ip_summed == CHECKSUM_PARTIAL (which implies that the frame contains a partial checksum) and the Xen network ring protocol similarly expects an SKB which has GSO set to also have NETRX_csum_blank (which also implies a partial checksum). However there have been cases of buggy guests which mark a frame as GSO but do not set csum_blank. If we detect that we a receiving such a frame (which manifests as ip_summed != PARTIAL && skb_is_gso) then force the SKB to partial and recalculate the checksum, since we cannot rely on the peer having done so if they have not set csum_blank. Add an ethtool stat to track occurances of this event. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: David Miller <davem@davemloft.net> Cc: xen-devel@lists.xensource.com Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnx2: Eliminate AER error messages on systems not supporting itMichael Chan2011-01-262-8/+10
| | | | | | | | | | | | | | | | | | | | | | On PPC for example, AER is not supported and we see unnecessary AER error message without this patch: bnx2 0003:01:00.1: pci_cleanup_aer_uncorrect_error_status failed 0xfffffffb Reported-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * cnic: Fix big endian bugMichael Chan2011-01-261-6/+6
| | | | | | | | | | | | | | | | | | The chip's page tables did not set up properly on big endian machines, causing EEH errors on PPC machines. Reported-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'master' of ↵David S. Miller2011-01-2612-39/+147
|\ \ | |/ | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
| * tg3: Use new VLAN codeMatt Carlson2011-01-262-88/+10
| | | | | | | | | | | | | | | | | | | | | | This patch pivots the tg3 driver to the new VLAN infrastructure. All references to vlgrp have been removed. The driver still attempts to disable VLAN tag stripping if CONFIG_VLAN_8021Q or CONFIG_VLAN_8021Q_MODULE is not defined. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge branch 'master' of ↵David S. Miller2011-01-268-12/+29
| |\ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
| | * rt2x00: add device id for windy31 usb deviceGreg Kroah-Hartman2011-01-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the device id for the windy31 USB device to the rt73usb driver. Thanks to Ralf Flaxa for reporting this and providing testing and a sample device. Reported-by: Ralf Flaxa <rf@suse.de> Tested-by: Ralf Flaxa <rf@suse.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * rtlwifi: Fix possible NULL dereferenceJesper Juhl2011-01-211-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In drivers/net/wireless/rtlwifi/pci.c::_rtl_pci_rx_interrupt() we call dev_alloc_skb(), which may fail and return NULL, but we do not check the returned value against NULL before dereferencing the returned pointer. This may lead to a NULL pointer dereference which means we'll crash - not good. In a separate call to dev_alloc_skb(), the debug level is changed so that the failure message will always be logged. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * ath9k: add missing ps wakeup/restore callsFelix Fietkau2011-01-212-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are several places where ath_reset() was called without proper calls to ath9k_ps_wakeup/ath9k_ps_restore. To fix this, add those calls directly to ath_reset and drop them from callers where it makes sense. Also add them to the config callback around ath_update_txpow to fix a crash that happens when the tx power changed before any vif is brought up. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * ath9k_hw: disabled PAPRD for AR9003Luis R. Rodriguez2011-01-212-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | AR9003's PAPRD was enabled prematurely, and is causing some large discrepancies on throughput and network connectivity. For example downlink (RX) throughput against an AR9280 AP can vary widlely from 43-73 Mbit/s while disabling this gets AR9382 (2x2) up to around 93 Mbit/s in a 2.4 GHz HT20 setup. Cc: stable@kernel.org Cc: Paul Shaw <paul.shaw@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * iwlwifi: don't read sku information from EEPROM for 4965Wey-Yi Guy2011-01-212-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For all the new devices, the sku information should read from EEPROM but for legacy devices such as 4965, appearly the EEPROM does not contain the necessary information. so skip the read from EEPROM and go back to use software configuration. Reported-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Tested-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | USB NET KL5KUSB101: Fix mem leak in error path of kaweth_download_firmware()Jesper Juhl2011-01-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We will leak the storage allocated by request_firmware() if the size of the firmware is greater than KAWETH_FIRMWARE_BUF_SIZE. This removes the leak by calling release_firmware() before we return -ENOSPC. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | pch_gbe: don't use flush_scheduled_work()Tejun Heo2011-01-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Directly cancel adapter->reset_task instead of using to-be-deprecated flush_scheduled_work(). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | bnx2: Always set ETH_FLAG_TXVLANMichael Chan2011-01-241-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | TSO does not work if the VLAN tag is in the packet (non-accelerated). We may be able to remove this restriction in future firmware. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Merge branch 'can/at91_can-for-net-2.6' of ↵David S. Miller2011-01-241-26/+112
| |\ \ | | | | | | | | | | | | git://git.pengutronix.de/git/mkl/linux-2.6
| | * | can: at91_can: make can_id of mailbox 0 configurableMarc Kleine-Budde2011-01-241-7/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to a chip bug (errata 50.2.6.3 & 50.3.5.3 in "AT91SAM9263 Preliminary 6249H-ATARM-27-Jul-09") the contents of mailbox 0 may be send under certain conditions (even if disabled or in rx mode). The workaround in the errata suggests not to use the mailbox and load it with an unused identifier. This patch implements the second part of the workaround. A sysfs entry "mb0_id" is introduced. While the interface is down it can be used to configure the can_id of mailbox 0. The default value id 0x7ff. In order to use an extended can_id add the CAN_EFF_FLAG (0x80000000U) to the can_id. Example: - standard id 0x7ff: echo 0x7ff > /sys/class/net/can0/mb0_id - extended id 0x1fffffff: echo 0x9fffffff > /sys/class/net/can0/mb0_id Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> For the Documentation-part: Acked-by: Wolfram Sang <w.sang@pengutronix.de>
| | * | can: at91_can: don't use mailbox 0Marc Kleine-Budde2011-01-241-12/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to a chip bug (errata 50.2.6.3 & 50.3.5.3 in "AT91SAM9263 Preliminary 6249H-ATARM-27-Jul-09") the contents of mailbox 0 may be send under certain conditions (even if disabled or in rx mode). The workaround in the errata suggests not to use the mailbox and load it with a unused identifier. This patch implements the first part of the workaround, it updates AT91_MB_RX_NUM and AT91_MB_RX_FIRST (and the inline documentation) so that mailbox 0 stays unused. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be>
| | * | can: at91_can: clean up usage of AT91_MB_RX_FIRST and AT91_MB_RX_NUMMarc Kleine-Budde2011-01-241-8/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch cleans up the usage of two macros which specify the mailbox usage. AT91_MB_RX_FIRST and AT91_MB_RX_NUM define the first and the number of RX mailboxes. The current driver uses these variables in an unclean way; assuming that AT91_MB_RX_FIRST is 0; This patch cleans up the usage of these macros, no longer assuming AT91_MB_RX_FIRST == 0. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com>
* | | | smc91x: add devicetree supportThomas Chou2011-01-251-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | tg3: Update copyrights and update version to 3.117Matt Carlson2011-01-252-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch updates copyrights and updates the tg3 version to 3.117. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | tg3: Fix eee preprocessor namingMatt Carlson2011-01-252-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a preprocessor naming bug for one of the EEE registers. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | tg3: Fix EEE interoperability issueMatt Carlson2011-01-252-7/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a problem where EEE will fail to work in certain environments. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | tg3: Disable EEE during loopback testsMatt Carlson2011-01-251-5/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | EEE interferes with the hardware's ability to loop a packet back to the host. This patch disables the feature for the duration of the test. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | tg3: Disable MAC loopback test for CPMU devicesMatt Carlson2011-01-251-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On CPMU devices, the MAC loopback test does not test any important paths the phy loopback test doesn't also test. The phy loopback test is the more comprehensive test. This patch disables the MAC loopback test for these devices. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | tg3: Fix loopback testsMatt Carlson2011-01-251-3/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The half-duplex bit in the MAC MODE register will be set during the loopback test if the external link is in half-duplex mode. This will cause the loopback test to fail on newer devices. This patch turns the half-duplex bit off for the test. Also, newer devices fail the internal phy loopback test because the phy link takes a little while to come up. This patch adds code to wait for the link before proceeding with the test. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | tg3: Restrict phy ioctl accessMatt Carlson2011-01-251-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If management firmware is present and the device is down, the firmware will assume control of the phy. If a phy access were allowed from the host, it will collide with firmware phy accesses, resulting in unpredictable behavior. This patch fixes the problem by disallowing phy accesses during the problematic condition. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | tg3: Disable multivec mode for 1 MSIX vectorMatt Carlson2011-01-251-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For single vector MSI-X allocations, we do not want to enable multivector modes. This patch makes the necessary corrections. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | tg3: Use new VLAN codeMatt Carlson2011-01-252-88/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch pivots the tg3 driver to the new VLAN infrastructure. All references to vlgrp have been removed. The driver still attempts to disable VLAN tag stripping if CONFIG_VLAN_8021Q or CONFIG_VLAN_8021Q_MODULE is not defined. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | tg3: Fix 5719 A0 tx completion bugMatt Carlson2011-01-252-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 5719 A0 has a bug that manifests itself as if the chipset were reordering memory writes. The best known way to solve this problem is to turn off LSO and jumbo frames. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | tg3: Revise 5719 internal FIFO overflow solutionMatt Carlson2011-01-252-38/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit cf79003d598b1f82a4caa0564107283b4f560e14, entitled "tg3: Fix 5719 internal FIFO overflow problem", proposed a way to solve an internal FIFO overflow problem. We have since discovered a slightly better way to solve the problem. This patch changes the code so that the problem is contained closer to the problem source. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | bonding: fix return value of couple of store functionsJiri Pirko2011-01-251-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | count is incorrectly returned even in case of fail. Return ret instead. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | veth: remove unneeded ifname code from veth_newlink()Jiri Pirko2011-01-241-12/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The code is not needed because tb[IFLA_IFNAME] is already processed in rtnl_newlink(). Remove this redundancy. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | net: reduce and unify printk level in netdev_fix_features()Michał Mirosław2011-01-241-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reduce printk() levels to KERN_INFO in netdev_fix_features() as this will be used by ethtool and might spam dmesg unnecessarily. This converts the function to use netdev_info() instead of plain printk(). As a side effect, bonding and bridge devices will now log dropped features on every slave device change. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | net: change netdev->features to u32Michał Mirosław2011-01-246-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Quoting Ben Hutchings: we presumably won't be defining features that can only be enabled on 64-bit architectures. Occurences found by `grep -r` on net/, drivers/net, include/ [ Move features and vlan_features next to each other in struct netdev, as per Eric Dumazet's suggestion -DaveM ] Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | typhoon: Kill references to UTS_RELEASEDavid S. Miller2011-01-241-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This makes the driver get rebuilt every single time you type 'make' which is beyond rediculious. I hereby declare this driver to have version "1.0" Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | tlan: add suspend/resume supportSakari Ailus2011-01-241-16/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add suspend/resume support to tlan driver. This allows not unloading the driver over suspend/resume. Also, start (or now, wake) the queue after resetting the adapter --- not the other way around. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | tlan: Code cleanup: checkpatch.pl is relatively happy now.Sakari Ailus2011-01-242-1928/+1967
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Remove CamelCase. - Convert hexadecimals to lower case. - Remove useless comments. Tlan driver contained a name of the function at the end of it in a comment. Remove those comments. - Remove local typedefs. Use real types instead of typedefs in code. - Resolve space issues and reindent. - One warning remain, it's a case where printing a single line involves a number of printk()s. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | Merge branch 'master' of ↵David S. Miller2011-01-2415-3/+2205
|\ \ \ \ | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/sched/sch_hfsc.c net/sched/sch_htb.c net/sched/sch_tbf.c
| * | | Merge branch 'master' of ↵David S. Miller2011-01-2456-103/+94
| |\ \ \ | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
| | * | | module: fix missing semicolons in MODULE macro usageRusty Russell2011-01-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | You always needed them when you were a module, but the builtin versions of the macros used to be more lenient. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| | * | | kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERTDavid Rientjes2011-01-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| | * | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2011-01-1920-210/+424
| | |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (41 commits) sctp: user perfect name for Delayed SACK Timer option net: fix can_checksum_protocol() arguments swap Revert "netlink: test for all flags of the NLM_F_DUMP composite" gianfar: Fix misleading indentation in startup_gfar() net/irda/sh_irda: return to RX mode when TX error net offloading: Do not mask out NETIF_F_HW_VLAN_TX for vlan. USB CDC NCM: tx_fixup() race condition fix ns83820: Avoid bad pointer deref in ns83820_init_one(). ipv6: Silence privacy extensions initialization bnx2x: Update bnx2x version to 1.62.00-4 bnx2x: Fix AER setting for BCM57712 bnx2x: Fix BCM84823 LED behavior bnx2x: Mark full duplex on some external PHYs bnx2x: Fix BCM8073/BCM8727 microcode loading bnx2x: LED fix for BCM8727 over BCM57712 bnx2x: Common init will be executed only once after POR bnx2x: Swap BCM8073 PHY polarity if required iwlwifi: fix valid chain reading from EEPROM ath5k: fix locking in tx_complete_poll_work ath9k_hw: do PA offset calibration only on longcal interval ...
| * | | | | can: add driver for Softing cardKurt Van Dijck2011-01-213-0/+374
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the driver that creates a platform:softing device from a pcmcia_device Note: the Kconfig indicates a dependency on the softing.ko driver, but this is purely to make configuration intuitive. This driver will work independent, but no CAN network devices appear until softing.ko is loaded too. Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | can: add driver for Softing cardKurt Van Dijck2011-01-218-0/+1815
| | |_|/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a driver for the platform:softing device. This will create (up to) 2 CAN network devices from 1 platform:softing device Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | bonding: Ensure that we unshare skbs prior to calling pskb_may_pullNeil Horman2011-01-203-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recently reported oops: kernel BUG at net/core/skbuff.c:813! invalid opcode: 0000 [#1] SMP last sysfs file: /sys/devices/virtual/net/bond0/broadcast CPU 8 Modules linked in: sit tunnel4 cpufreq_ondemand acpi_cpufreq freq_table bonding ipv6 dm_mirror dm_region_hash dm_log cdc_ether usbnet mii serio_raw i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support shpchp ioatdma i7core_edac edac_core bnx2 ixgbe dca mdio sg ext4 mbcache jbd2 sd_mod crc_t10dif mptsas mptscsih mptbase scsi_transport_sas dm_mod [last unloaded: microcode] Modules linked in: sit tunnel4 cpufreq_ondemand acpi_cpufreq freq_table bonding ipv6 dm_mirror dm_region_hash dm_log cdc_ether usbnet mii serio_raw i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support shpchp ioatdma i7core_edac edac_core bnx2 ixgbe dca mdio sg ext4 mbcache jbd2 sd_mod crc_t10dif mptsas mptscsih mptbase scsi_transport_sas dm_mod [last unloaded: microcode] Pid: 0, comm: swapper Not tainted 2.6.32-71.el6.x86_64 #1 BladeCenter HS22 -[7870AC1]- RIP: 0010:[<ffffffff81405b16>] [<ffffffff81405b16>] pskb_expand_head+0x36/0x1e0 RSP: 0018:ffff880028303b70 EFLAGS: 00010202 RAX: 0000000000000002 RBX: ffff880c6458ec80 RCX: 0000000000000020 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880c6458ec80 RBP: ffff880028303bc0 R08: ffffffff818a6180 R09: ffff880c6458ed64 R10: ffff880c622b36c0 R11: 0000000000000400 R12: 0000000000000000 R13: 0000000000000180 R14: ffff880c622b3000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff880028300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00000038653452a4 CR3: 0000000001001000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 0, threadinfo ffff8806649c2000, task ffff880c64f16ab0) Stack: ffff880028303bc0 ffffffff8104fff9 000000000000001c 0000000100000000 <0> ffff880000047d80 ffff880c6458ec80 000000000000001c ffff880c6223da00 <0> ffff880c622b3000 0000000000000000 ffff880028303c10 ffffffff81407f7a Call Trace: <IRQ> [<ffffffff8104fff9>] ? __wake_up_common+0x59/0x90 [<ffffffff81407f7a>] __pskb_pull_tail+0x2aa/0x360 [<ffffffffa0244530>] bond_arp_rcv+0x2c0/0x2e0 [bonding] [<ffffffff814a0857>] ? packet_rcv+0x377/0x440 [<ffffffff8140f21b>] netif_receive_skb+0x2db/0x670 [<ffffffff8140f788>] napi_skb_finish+0x58/0x70 [<ffffffff8140fc89>] napi_gro_receive+0x39/0x50 [<ffffffffa01286eb>] ixgbe_clean_rx_irq+0x35b/0x900 [ixgbe] [<ffffffffa01290f6>] ixgbe_clean_rxtx_many+0x136/0x240 [ixgbe] [<ffffffff8140fe53>] net_rx_action+0x103/0x210 [<ffffffff81073bd7>] __do_softirq+0xb7/0x1e0 [<ffffffff810d8740>] ? handle_IRQ_event+0x60/0x170 [<ffffffff810142cc>] call_softirq+0x1c/0x30 [<ffffffff81015f35>] do_softirq+0x65/0xa0 [<ffffffff810739d5>] irq_exit+0x85/0x90 [<ffffffff814cf915>] do_IRQ+0x75/0xf0 [<ffffffff81013ad3>] ret_from_intr+0x0/0x11 <EOI> [<ffffffff8101bc01>] ? mwait_idle+0x71/0xd0 [<ffffffff814cd80a>] ? atomic_notifier_call_chain+0x1a/0x20 [<ffffffff81011e96>] cpu_idle+0xb6/0x110 [<ffffffff814c17c8>] start_secondary+0x1fc/0x23f Resulted from bonding driver registering packet handlers via dev_add_pack and then trying to call pskb_may_pull. If another packet handler (like for AF_PACKET sockets) gets called first, the delivered skb will have a user count > 1, which causes pskb_may_pull to BUG halt when it does its skb_shared check. Fix this by calling skb_share_check prior to the may_pull call sites in the bonding driver to clone the skb when needed. Tested by myself and the reported successfully. Signed-off-by: Neil Horman CC: Andy Gospodarek <andy@greyhouse.net> CC: Jay Vosburgh <fubar@us.ibm.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | cxgb4: fix reported state of interfaces without linkDimitris Michailidis2011-01-201-1/+2
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently tools like ip and ifconfig report incorrect state for cxgb4 interfaces that are up but do not have link and do so until first link establishment. This is because the initial netif_carrier_off call is before register_netdev and it needs to be after to be fully effective. Fix this by moving netif_carrier_off into .ndo_open. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | igb: Add support for i340 Quad Port Fiber AdapterCarolyn Wyborny2011-01-243-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables support for Intel i340 Quad Port Fiber Adapter. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
OpenPOWER on IntegriCloud