summaryrefslogtreecommitdiffstats
path: root/drivers/net
Commit message (Collapse)AuthorAgeFilesLines
* PS3: gelic: change the prefix of the net interface for wirelessMasakazu Mokuno2008-03-131-0/+2
| | | | | | | | | | | | | The gelic driver uses two net interfaces, one for ethernet and the other for wireless. They share same MAC address and use 'eth' prefix for the name. As udev uses the MAC address to check uniqueness, this is somewhat problematic. So change the prefix of the network interface name for the wireless so that udev can have an easy way to distinguish interfaces. Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* PS3: gelic: ignore scan info from zero SSID beaconsMasakazu Mokuno2008-03-131-12/+15
| | | | | | | | | | | | Some implementations of the hidden SSID APs emit beacons which have the zero length SSID information element instead of SSID padded by null (\0) characters. If the firmware of the PS3 wireless hardware meets these beacons, it abandons parsing IEs. Thus guest OSes get the invalid scan information for the AP. To work around this, ignore these scan informations from the list. Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* prism54: support for 124a:4025 - another version of IOGear GWU513 802.11gJan Slupski2008-03-131-0/+1
| | | | | | | | | | Add support to p54usb driver for apparently another version of IOGear GWU513 802.11g USB network card that uses GW3887IK chipset and is recognized as "124a:4025 AirVast" by lsusb. Cc: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Add new D-Link USB IDIvo van Doorn2008-03-111-0/+1
| | | | | Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: never disable multicast because it disables broadcast tooAdam Baker2008-03-112-4/+4
| | | | | | | | | | On rt73 and rt61 disabling reception of multicast packets also disables broadcast traffic which we never want to do. Therefore we should never disable multicast. Signed-off-by: Adam Baker <linux@baker-net.org.uk> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* libertas: fix the 'compare command with itself' properlySebastian Siewior2008-03-111-1/+1
| | | | | | | | | |libertas: Invalid CMD_RESP 8012 to command 50! The special case got mixed up in 8a96df80b3. Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* drivers/net/Kconfig: fix whitespace for GELIC_WIRELESS entryJohn W. Linville2008-03-111-9/+9
| | | | Signed-off-by: John W. Linville <linville@tuxdriver.com>
* net/enc28j60: oops fixDavid Brownell2008-03-051-1/+2
| | | | | | | | | Prevent oops on enc28j60 packet RX: make sure buffers are aligned. Not all architectures support unaligned accesses in kernel space. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Claudio Lanconelli <lanconelli.claudio@eptar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/ac3200.c: replace init_module&cleanup_module with ↵Jon Schindler2008-03-051-3/+4
| | | | | | | | | | | module_init&module_exit Replace init_module and cleanup_module with static functions and module_init/module_exit. Signed-off-by: Jon Schindler <jkschind@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/apne.c: replace init_module&cleanup_module with ↵Jon Schindler2008-03-051-3/+4
| | | | | | | | | | | module_init&module_exit Replaced init_module and cleanup_module with static functions and module_init/module_exit. Signed-off-by: Jon Schindler <jkschind@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/arcnet/capmode.c: replace init_module&cleanup_module with ↵Jon Schindler2008-03-051-2/+4
| | | | | | | | | | | module_init&module_exit Replaced init_module and cleanup_module with static functions and module_init/module_exit. Signed-off-by: Jon Schindler <jkschind@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/appletalk/ltpc.c: replace init_module&cleanup_module with ↵Jon Schindler2008-03-051-1/+2
| | | | | | | | | | | module_init&module_exit Replaced init_module and cleanup_module with static functions and module_init/module_exit. Signed-off-by: Jon Schindler <jkschind@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [PPPOL2TP]: Fix SMP issues in skb reorder queue handlingJames Chapman2008-03-051-3/+8
| | | | | | | | | | | | | | | When walking a session's packet reorder queue, use skb_queue_walk_safe() since the list could be modified inside the loop. Rearrange the unlinking skbs from the reorder queue such that it is done while the queue lock is held in pppol2tp_recv_dequeue() when walking the skb list. A version of this patch was suggested by Jarek Poplawski. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [PPPOL2TP]: Make locking calls softirq-safeJames Chapman2008-03-051-29/+29
| | | | | | | | | | | | | | | | Fix locking issues in the pppol2tp driver which can cause a kernel crash on SMP boxes. There were two problems:- 1. The driver was violating read_lock() and write_lock() scheduling rules because it wasn't using softirq-safe locks in softirq contexts. So we now consistently use the _bh variants of the lock functions. 2. The driver was calling sk_dst_get() in pppol2tp_xmit() which was taking sk_dst_lock in softirq context. We now call __sk_dst_get(). Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: replace __inline with inlineHarvey Harrison2008-03-051-1/+1
| | | | | | Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* make s2io.c:init_tti() staticAdrian Bunk2008-03-051-1/+1
| | | | | | | | | Make the needlessly global init_tti() static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: "Ramkrishna Vepa" <Ramkrishna.Vepa@neterion.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* FIXED_PHY must depend on PHYLIB=yAdrian Bunk2008-03-051-0/+1
| | | | | | | | | | | | | | | | | | This patch fixes the following build error introduced by commit a79d8e93d300adb84cccc38ac396cfb118c238ad and reported by Olaf Hering: <-- snip --> ... LD .tmp_vmlinux1 arch/powerpc/sysdev/built-in.o: In function `of_add_fixed_phys': fsl_soc.c:(.init.text+0xd34): undefined reference to `fixed_phy_add' make: *** [.tmp_vmlinux1] Error 1 <-- snip --> Signed-off-by: Adrian Bunk <adrian.bunk@movial.fi> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* fix drivers/net/atarilance.c compilationAdrian Bunk2008-03-051-3/+2
| | | | | | | | | | | | | | | | | | This patch fixes the following build error: <-- snip --> ... CC [M] drivers/net/atarilance.o {standard input}: Assembler messages: {standard input}:406: Error: symbol `Lberr' is already defined {standard input}:460: Error: symbol `Lberr' is already defined make[3]: *** [drivers/net/atarilance.o] Error 1 <-- snip --> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ixgbe: fix typo in speed mesageEmil Tantilov2008-03-051-1/+1
| | | | | | Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* e100: Do suspend/shutdown like e1000Auke Kok2008-03-051-26/+3
| | | | | | | | | This fixes a "trying to free already free IRQ" message and simplifies the shutdown/suspend code by re-using already existing code when going to suspend. The code is now symmetric with e100_resume. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ehea: Fix missing Kconfig dependencyThomas Klein2008-03-051-1/+1
| | | | | | | Fixed Kconfig: ehea driver requires sparse mem Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* axnet_cs: change debugging level for "Too much work at interrupt" message.Komuro2008-03-051-1/+1
| | | | | | | This message is frequently displayed even if normal file-transfer. Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* mv643xx_eth: Define module alias for platform deviceMartin Michlmayr2008-03-051-0/+1
| | | | | | | | | | The mv643xx_eth driver can be loaded as a platform device, as is done by various Orion (ARM) based devices. The driver needs to define a module alias for the platform driver so udev will load it automatically. Tested with Debian on a QNAP TS-209. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* de2104x: remove BUG_ON() when changing media typeOndrej Zary2008-03-051-1/+2
| | | | | | | | | When the chip dies (probably because of a bug somewhere in the driver), de_stop_rxtx() fails and changing the media type crashes the whole machine. Replace BUG_ON() in de_set_media() with a warning. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* dm9161: add configuration for MII/RMIIfrederic Rodo2008-03-051-3/+14
| | | | | Signed-off-by: Frederic Rodo <f.rodo@til-technologies.fr> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* b43legacy: Fix module init messageMichael Buesch2008-03-041-1/+1
| | | | | | | | This fixes the module init message to tell that the legacy driver loaded. This makes it less confusing, in case both drivers are loaded. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rndis_wlan: fix broken data copyJussi Kivilinna2008-03-041-5/+3
| | | | | | | | | | Replace broken code that attempted to copy 6 byte array to 64-bit integer. Due to missing cast to 64-bit integer, left shift operation were 32-bit and lead to bytes been copied over each other. New code uses simple memcpy, for greater readability and efficiency. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* libertas: compare the current command with responseSebastian Siewior2008-03-041-3/+1
| | | | | | | instead of with itself. Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* libertas: fix sanity check on sequence number in command responseDavid Woodhouse2008-03-041-2/+2
| | | | | | | | | | | Slightly more useful if we compare it against the sequence number of the command we have outstanding, rather than comparing the reply with itself. Doh. Pointed out by Sebastian Siewior Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* p54: fix eeprom parser length sanity checksJohannes Berg2008-03-041-7/+11
| | | | | | | | | | | When I called p54_parse_eeprom() on a hand-coded structure I managed to make a small mistake with wrap->len which caused a segfault a few lines down when trying to read entry->len. This patch changes the validation code to avoid such problems. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* p54: fix EEPROM structure endiannessJohannes Berg2008-03-042-5/+5
| | | | | | | | | | | Since the EEPROM structure is read from hardware, it is always little endian, annotate that in the struct and make sure to convert where applicable. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Michael Wu <flamingice@sourmilk.net> Tested-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PPPOL2TP]: Add missing sock_put() in pppol2tp_tunnel_closeall()Jarek Poplawski2008-03-031-1/+6
| | | | | | | | Every skb removed from session->reorder_q needs sock_put(). Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Acked-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Subject: [PPPOL2TP] add missing sock_put() in pppol2tp_recv_dequeue()Jarek Poplawski2008-03-031-0/+1
| | | | | | | | Every skb removed from session->reorder_q needs sock_put(). Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Acked-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [TUN]: Fix RTNL-locking in tun/tap driverKim B. Heino2008-02-291-1/+5
| | | | | | | | | | | | | | Current tun/tap driver sets also net device's hw address when asked to change character device's hw address. This is a good idea, but it misses RTLN-locking, resulting following error message in 2.6.25-rc3's inetdev_event() function: RTNL: assertion failed at net/ipv4/devinet.c (1050) Attached patch fixes this problem. Signed-off-by: Kim B. Heino <Kim.Heino@bluegiga.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BNX2X]: update version, remove CVS stringsEliezer Tamir2008-02-281-3/+2
| | | | | Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BNX2X]: Fix Xmit bugsEliezer Tamir2008-02-282-5/+10
| | | | | | | | | Several endianity corrections in start_xmit() Fixed TSO bug where packets were missing the TCP flags. Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BNX2X]: Prevent PCI queue overflowEliezer Tamir2008-02-281-4/+8
| | | | | | | Limit traffic through an internal queue to prevent overflow. Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BNX2X]: fix slowpath races and lockingEliezer Tamir2008-02-282-100/+116
| | | | | | | | | | | | | | | | | | | Fixed locking between fastpath and slowpath operations. Corrected order of traffic disabling to prevent race when going down under traffic. - first have the microcode drop all incoming packets - then do the slowpath stuff - only then reset the MAC Got rid of in_reset_task. Remove_one() and friends would deference a null pointer if init_one failed. Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BNX2X]: fix HW attentions and error handlingEliezer Tamir2008-02-281-79/+150
| | | | | | | | | | | | | Some of the HW attentions, used to indicate an error were not properly acked. This will cause the driver to endlessly receive interrupts when such an error happens. Had to break the code into smaller chunks because it got too nested. Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BNX2X]: fix MSI-X/INT#A errataEliezer Tamir2008-02-281-8/+16
| | | | | | | | | | Errata A0.158 workaround. Running in INT#A mode after running with MSI-X fails due to a PCI core bug. Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BNX2X]: correct statisticsEliezer Tamir2008-02-282-85/+83
| | | | | | | Errors were summed improperly, some stats were missing. Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BNX2X]: Correct RX filtering and MC configurationEliezer Tamir2008-02-282-78/+92
| | | | | | | | | | | | | | | The configuration of RX filtering needed the following corrections: Drop flags need to be set per Rx queue. Have to tell the microcode to collect drop stats, and properly wait for them to complete when going down. Sometimes we failed to detect proper completion due to a logical error in the wait loop. Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BNX2X]: Correct Link managementEliezer Tamir2008-02-285-649/+1734
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Properly protect PHY access between two devices on the same board with a HW lock. Use GPIO to clear all previous configurations before changing link parameters. Shut down the external PHY in case of fan failure. Reducing the MDC/MDIO clock to 2.5MHz due to problems with some devices. Resolve the flow control response according to autoneg with external PHY. Unmasking all PHY interrupts in single write to prevent a race in the interrupts order. LASI indication fixes to work with peculiarities of PHYs. Disable MAC RX to avoid a HW bug when closing the MAC under traffic. Disable parallel detection on HiGig due to HW limitation. Updating the shared memory structure to work with the current bootcode. Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BNX2X]: Correct init_one()Eliezer Tamir2008-02-282-15/+31
| | | | | | | | Correct PCI-E info printed by init_one() In one case it failed to free the netdev. Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BNX2X]: Spelling fixesEliezer Tamir2008-02-282-65/+56
| | | | | Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Don't build bcm43xx if SSB is static and b43 PCI-SSB bridge is enabled.Alexey Zaytsev2008-02-281-1/+1
| | | | | | | | | | This may happen e.g. when the ssb is statically enables by the b44 driver, and the b43 pci-ssb bridge is enbled by the b43/b43legacy drivers, or the b43/b43legacy drivers are built statically. Signed-off-by: Alexey Zaytsev <alexey.zaytsev@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Use a separate config option for the b43 pci to ssb bridge.Alexey Zaytsev2008-02-282-0/+2
| | | | | | | | | | | | | The bridge code was unnecessary enabled by the b44 driver, but it prevents the bcm43xx driver from being loaded, as the bridge claims the same pci ids. Now we enable the birdge only if the b43{legacy} drivers are selected. Signed-off-by: Alexey Zaytsev <alexey.zaytsev@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* libertas: Remove unused exportsRoland Dreier2008-02-283-20/+0
| | | | | | | | | | | | | | | | | The libertas driver exports a number of symbols with no in-tree users; remove these unused exports. lbs_reset_device() is completely unused, with no callers at all, so remove the function completely. A couple of these unused exported symbols are static, which causes the following build error on ia64 with gcc 4.2.3: drivers/net/wireless/libertas/main.c:1375: error: __ksymtab_lbs_remove_mesh causes a section type conflict drivers/net/wireless/libertas/main.c:1354: error: __ksymtab_lbs_add_mesh causes a section type conflict Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Fix rt2x00lib_reset_link_tuner()Ivo van Doorn2008-02-281-19/+30
| | | | | | | | | | | | | | | | | rt2x00lib_reset_link_tuner() can be called from within the link tuner itself. This means that it should _not_ call rt2x00lib_stop_link_tuner() since that will cause the thread to hang. Reorder the things that should be done during a link tuner reset and during a link tuner start. Also make antenna tuning the last step of the link tuner since it could possibly reset some statistical information which we need for average calculation. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Don't switch to antenna with low rssiIvo van Doorn2008-02-282-13/+9
| | | | | | | | | | | | When rssi_a > rssi_b is true and the current antenna was already antenna A, then rt2x00 incorrectly jumped to antenna B. Also don't configure the antenna when there has been no change in the antenna setup. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
OpenPOWER on IntegriCloud