summaryrefslogtreecommitdiffstats
path: root/drivers/net
Commit message (Collapse)AuthorAgeFilesLines
* vxge: Fixed MSIX interrupt configuration.Sreenivasa Honnur2010-03-294-120/+81
| | | | | | | | | | | | | | | | - Fixed MSIX interrupt configuration to support non contiguous vpaths in functions. Four msi-x vectors are reserved per vpath internal to the chip. In all, there are 68 msi-x vectors for the 17 vpaths in the chip. In the multi function configurations, non-contiguous vpaths are configured to represent a function. For instance vpaths 0 and 8 can be configured to represent function zero. - If pci_enable_msix fails for the requested vectors, try with a lesser number vectors by reducing the vpath count. Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vxge: Fixed "ethtool -d" prints.Sreenivasa Honnur2010-03-291-3/+2
| | | | | | | | | - Fixed "ethtool -d" prints - reg_space pointer was getting over written, updating it correctly. Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vxge: Align the memory only if it is misaligned.Sreenivasa Honnur2010-03-291-4/+16
| | | | | | | | - Align the memory only if it is misaligned. Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vxge: Fix starvation of receive ring controller when blasted by short packets.Sreenivasa Honnur2010-03-293-13/+6
| | | | | | | | | | | | - Fix starvation of receive ring controller when blasted by short packets. This was because the driver was posting 64 rxds initially while the ring controller was expecting to read 256 replenished rxds. While the driver was coming up, the internal rxd memory filled up the 64 buffers provided and the ring controller was left waiting for the remaining 192 rxds to complete the write back of completed rxds to the host and generation of an interrupt. Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vxge: Fix a receive stall due to driver being out of synch with chip.Sreenivasa Honnur2010-03-292-7/+56
| | | | | | | | | | | | | | | | | - Fix a receive stall due to driver being out of synch with chip. In a corner case scenario the adapter's ring controller may return a RxD with transfer code of 0xC, while the host ownership bit is still set to the adapter. The driver needs to assume that this case where (host_ownership == 1 or adapter) and (transfer_code == 0xC) is valid, that is, this RxD has been returned by the receive ring controller but no frame data is associated with the rxd. - Restore the transfer code field of each newly replenished RxD to 0x0. - Code cleanup. Removed usage of magic numbers. Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2010-03-2969-1421/+8589
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
| * iwlwifi: fix build error for CONFIG_IWLAGN=nJohn W. Linville2010-03-241-0/+2
| | | | | | | | | | | | | | | | drivers/net/wireless/iwlwifi/iwl-rx.c: In function 'iwl_good_ack_health': drivers/net/wireless/iwlwifi/iwl-rx.c:647: error: 'struct iwl_priv' has no member named '_agn' Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * libertas: add auto auth mode featureAmitkumar Karwar2010-03-244-1/+27
| | | | | | | | | | | | | | | | | | | | | | | | Auto auth mode is enabled by default. If user doesn't specify the auth mode, while association driver will first try with open mode and then with shared key mode. If user specifies an auth mode, auto auth is disabled and driver will not try association with another auth mode. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_htc: Fix symbol collision with ath9kSujith2010-03-244-28/+28
| | | | | | | | | | Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * drivers/net/wireless/b43/main.c:4351: Fixed coding styleDaniel Ngu2010-03-231-3/+2
| | | | | | | | | | | | | | WARNING: braces {} are not necessary for any arm of this statement Signed-off-by: Daniel Ngu <daniel.dy.ngu@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * drivers/net/wireless/ray_cs.c: Use iw_handler function prototypesJoe Perches2010-03-231-111/+93
| | | | | | | | | | | | | | | | | | Change local functions that are cast to iw_handler to the more standard use with "union iwreq_data *wrqu" so the iw_handler array no longer needs the casts. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * orinoco/wext.c: Remove local #define STD_IW_HANDLERJoe Perches2010-03-231-48/+46
| | | | | | | | | | | | | | Use IW_HANDLER from wireless.h instead Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * drivers/net: Remove local #define IW_IOCTL, use IW_HANDLERJoe Perches2010-03-232-60/+58
| | | | | | | | | | | | | | Use #define IW_HANDLER from wireless.h instead Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * drivers/net/wireless: Use IW_HANDLER macroJoe Perches2010-03-232-46/+46
| | | | | | | | | | | | | | Convert direct uses of [ (foo - SIOCIWFIRST) , fn) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wl1271: Changed platform_device to be dynamically allocatedTeemu Paasikivi2010-03-235-11/+39
| | | | | | | | | | | | | | | | | | | | | | | | Changed platform_device to be allocated dynamically from the wl1271_alloc_hw function. Also cleaned up error handling in the wl1271_alloc_hw function and module probe functions. Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wl1271: Remove circular interlocking related to the inetaddr notifier chainJuuso Oikarinen2010-03-231-1/+2
| | | | | | | | | | | | | | | | | | | | | | Removing the wl1271 from the inet addr notifier chain sometimes causes the registered handler to be called - causing locking problems if the removing function is called from within the mutex. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wl1271: Don't generate null func template for ad-hocJuuso Oikarinen2010-03-232-11/+21
| | | | | | | | | | | | | | | | | | | | The null func template is not needed for ad-hoc, and it's generation is not supported for ad-hoc (mac80211 will WARN about it.) Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wl1271: Update filters properlyJuuso Oikarinen2010-03-233-18/+51
| | | | | | | | | | | | | | | | | | This patch adds support for the filters configured by the mac80211 stack. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wl1271: Removed duplicate code from module remove function.Teemu Paasikivi2010-03-231-12/+1
| | | | | | | | | | | | | | | | | | | | | | | | Removed duplicate code from wl1271_sdio module remove function. For freeing stuff in the remove function wl1271_free_hw function is now used. Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wl1271: Added DEBUG_SDIO flagTeemu Paasikivi2010-03-232-8/+13
| | | | | | | | | | | | | | | | | | | | | | Added separate flag for SDIO debugging. Previously it has used DEBUG_SPI flag. This patch also includes couple indentation fixes. Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wl1271: Remove deprecated interface config functionJuuso Oikarinen2010-03-231-68/+0
| | | | | | | | | | | | | | | | | | It's no longer needed. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wl1271: Fix MAC address handlingJuuso Oikarinen2010-03-232-89/+68
| | | | | | | | | | | | | | | | | | | | | | | | This patch fixes MAC address handling. To achieve this, firmware booting had to be delayed from the previous op_start to op_add_interface, which is the point when the driver gets to know the configured MAC address. As the wl1271 only supports one virtual interface, this even seems quite logical. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wl1271: enable U-APSDKalle Valo2010-03-231-2/+8
| | | | | | | | | | | | | | | | | | | | wl1271 supports U-APSD similarly as wl1251, so let's enable it. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wl1271: fix ps scheme in wl1271_op_conf_tx()Kalle Valo2010-03-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | Commit "wl1271: implement WMM" accidentally used CONF_PS_SCHEME_LEGACY_PSPOLL, but instead CONF_PS_SCHEME_LEGACY should be used as earlier. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wl1271: create qos nullfunc templateKalle Valo2010-03-232-0/+23
| | | | | | | | | | | | | | | | | | | | Needed for U-APSD. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wl1271: get probe request template from mac80211Kalle Valo2010-03-234-116/+40
| | | | | | | | | | | | | | | | | | | | If we get probe request from mac80211, we can remove two functions. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wl1271: get pspoll and nullfunc templates from mac80211Kalle Valo2010-03-231-24/+20
| | | | | | | | | | | | | | | | | | | | mac80211 now can create pspoll and nullfunc templates, better to use those. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wl1271: enable WMMKalle Valo2010-03-232-3/+2
| | | | | | | | | | | | | | | | | | | | Everything is ready now and we can enable WMM in wl1271. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wl1271: Add sysfs file to control BT co-ex stateJuuso Oikarinen2010-03-235-4/+81
| | | | | | | | | | | | | | | | | | | | Add a sysfs file to control the state of the BT co-ex (enable or disable it.) By default, the BT co-ex is enabled. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wl1271: Move platform device registration from _spi to _mainJuuso Oikarinen2010-03-232-31/+37
| | | | | | | | | | | | | | | | | | | | In order to get the platform device for both SPI and SDIO, move the platform device registration to wl1271_main.c from wl1271_spi.c. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wl1271: Add proper WLAN-BT co-ex configuration, and enable co-ex.Juuso Oikarinen2010-03-235-139/+328
| | | | | | | | | | | | | | | | | | | | | | | | Add configuration values for the varous WLAN-BT co-ex configuration parameters, and finally enable WLAN-BT co-ex. Based on preliminary measurements, it appears the co-ex feature is not increasing WLAN power consumption, if BT is not activated. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wl1271: Fix SG configuration message structuresJuuso Oikarinen2010-03-232-71/+66
| | | | | | | | | | | | | | | | | | | | | | The bluetooth coexistence (SG) configuration messages have changed and were completely wrong. For instance, intending to enable the SG, it was instead disabled. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wl1271: Changed SDIO MMC host claimingTeemu Paasikivi2010-03-231-18/+9
| | | | | | | | | | | | | | | | | | | | | | Changed driver to keep MMC host claimed while wlan interface is up. This keeps MMC stack from powering the SDIO device down. Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wl1271: Cleaned up wlan power on/off functionsTeemu Paasikivi2010-03-236-25/+30
| | | | | | | | | | | | | | | | | | | | | | Added method for wlan power control to io_ops struct and moved wl1271_power_on and wl1271_power_off functions to wl1271_io.h. Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wl1271: Fix configuration of the TX opportunity valueJuuso Oikarinen2010-03-231-1/+2
| | | | | | | | | | | | | | | | | | | | The per-queue TX opportunity value is configured by the mac80211 in units of 32us. The firmware however wants it in us, so add the conversion. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_htc: Support for AR9271 chipset.Sujith2010-03-2318-1/+6393
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Features: * Station mode * IBSS mode * Monitor mode * Legacy support * HT support * TX/RX 11n Aggregation * HW encryption * LED * Suspend/Resume For more information: http://wireless.kernel.org/en/users/Drivers/ath9k_htc Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_hw: fix hardware deinitSujith2010-03-232-3/+4
| | | | | | | | | | | | | | | | | | | | | | Without this you will get a panic if the device initialization fails. Also, free ath_hw instance properly. ath9k_hw_deinit() shouldn't do it. Cc: stable@kernel.org Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_hw: add HTC init hardware call for special resets for AR9271Sujith2010-03-232-0/+15
| | | | | | | | | | | | | | | | | | | | | | AR9271 needs a full reset only upon the first reset, add a call for the driver to enable these special resets. We can optimize this out later without an export. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_hw: always set the core clock for AR9271Sujith2010-03-231-32/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | When initializing the PLL on AR9271 we always need to set the core clock to 117MHz. While at it remove the baud rate settings for the serial device on the AR9271, the default settings work well unless you want to customize it. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_hw: use the skip count for PA calibration on AR9271Sujith2010-03-231-3/+6
| | | | | | | | | | | | | | | | | | | | Periodic power amplifier offset calibration is skipped on ath9k algorithmically, this is required on AR9271. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_hw: restrict valid nf readings for AR9271 to -114Sujith2010-03-231-0/+8
| | | | | | | | | | | | | | | | | | | | Noisefloor values read on AR9271 are unreliable if they are less than -114, set those statically to -116. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_hw: fix noisefloor history buffer usage on AR9271Sujith2010-03-231-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Noisefloor calibration involves querying hardware for samples and storing this information on a history buffer in hardware for actual noisefloor calibration processing in hardware. The history buffer supports collecting information for all Atheros hardware, one history buffer slot for each chain on each channel used for MIMO operation. For current hardware this means one history buffer slot for each chain on both the control (or primary) channel and the extension (or secondary) channel. We know which noisefloor registers to poke for collecting noisefloor data through the chainmask. For AR9285 and AR9271 devices, both 1x1, the chaimmask is defined as 0x9 = 0b0001001. The first four bits represent each chain out of a maximum of 4 chains [0-3] on the primary channel. The last four bits represent each chain on the extension channel. A chainmask of 0x9 therefore indicates chain 1 is active on both the primary and the extension channel. AR9271 only requires collecting and storing noisefloor history buffer data for the first chain on both the control and extension channel (nfarray[0] and nfarray[3]) so fix the code and avoid which reads and writes to the history buffer for the other chains. Since the noisefloor varies depending on the number of chains your device supports also initialize the noisefloor history buffer with reasonable values seen on 1x1 devices such as AR9285. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_hw: Fix full sleep setup for AR9271Sujith2010-03-231-1/+1
| | | | | | | | | | | | | | | | | | | | After telling the AR9271 to go into full sleep we do not need to clear the RTC reset signal. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_hw: fix TX descriptor setup for AR9271Sujith2010-03-231-1/+1
| | | | | | | | | | | | | | | | | | | | The TX descriptors setup for AR971 requires the same setup as AR9285, so use that. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_hw: skip chip tests for AR9271Sujith2010-03-231-2/+4
| | | | | | | | | | | | | | | | | | | | The chip test is not required for AR9271 on the host driver code as the firmware will do the test internally on its own. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_hw: add GPIO setup code for AR9271Sujith2010-03-232-2/+12
| | | | | | | | | | | | | | | | | | Assign the proper number of GPIO pins for AR9271. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_hw: update initialization values for AR9271Sujith2010-03-233-65/+146
| | | | | | | | | | | | | | | | | | | | Update the register initialization values for AR9271. This is based on our last review from our systems team. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: decrease size of ath9k.koMing Lei2010-03-231-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From e74b075cdb143d45be9b371ee8a8e2dcfc15ab34 Mon Sep 17 00:00:00 2001 From: Ming Lei <tom.leiming@gmail.com> Date: Sat, 27 Feb 2010 23:50:54 +0800 Subject: [PATCH] ath9k: decrease size of ath9k.ko The patch defines the fields of 'valid_single_stream' and 'valid' in struct ath_rate_table as char type, so decrease the size of ath9k.ko about 2KB. old ath9k.ko [tom@tom-lei ath9k]$ size ath9k.ko text data bss dec hex filename 69344 3080 168 72592 11b90 ath9k.ko new ath9k.ko [tom@tom-lei ath9k]$ size ath9k.ko text data bss dec hex filename 67304 3080 168 70552 11398 ath9k.ko Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: code cleanup for connectivity recoveryWey-Yi Guy2010-03-196-40/+85
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Split the connectivity check and recovery routine into separated functions based on the types 1. iwl_good_ack_health() - check for ack count 2. iwl_good_plcp_health() - check for plcp error Based on the type of errors being detected, different recovery methods will be used to bring the system back to normal operational state. Because different NIC has different HW and uCode, the behavior is also different; these functions thus now form part of the ops infrastructure, so we can have more control on how to monitor and recover from error condition case per device. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
| * iwlwifi: Recover TX flow failureWey-Yi Guy2010-03-193-2/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Monitors the tx statistics to detect the drop in throughput. When the throughput drops, the ratio of the actual_ack_count and the expected_ack_count also drops. At the same time, the aggregated ba_timeout (the number of ba timeout retries) also rises. If the actual_ack_count/expected_ack_count ratio is 0 and the number of ba timeout retries rises to BA_TIMEOUT_MAX, no tx packets can be delivered. Reloading the uCode and bring the system back to normal operational state. Signed-off-by: Trieu 'Andrew' Nguyen <trieux.t.nguyen@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
OpenPOWER on IntegriCloud