summaryrefslogtreecommitdiffstats
path: root/drivers/net
Commit message (Collapse)AuthorAgeFilesLines
* be2net: fix unconditionally returning IRQ_HANDLED in INTxSathya Perla2013-01-122-9/+21
| | | | | | | | | | | | | | | | | | | | | | | | commit e49cc34f introduced an unconditional IRQ_HANDLED return in be_intx() to workaround Lancer and BE2 HW issues. This is bad as it prevents the kernel from detecting interrupt storms due to broken HW. The BE2/Lancer HW issues are: 1) In Lancer, there is no means for the driver to detect if the interrupt belonged to device, other than counting and notifying events. 2) In Lancer de-asserting INTx takes a while, causing the INTx irq handler to be called multiple times till the de-assert happens. 3) In BE2, we see an occasional interrupt even when EQs are unarmed. Issue (1) can cause the notified events to be orphaned, if NAPI was already running. This patch fixes this issue by scheduling NAPI only if it is not scheduled already. Doing this also takes care of possible events_get() race that may be caused due to issue (2) and (3). Also, IRQ_HANDLED is returned only the first time zero events are detected. (Thanks Ben H. for the feedback and suggestions.) Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tuntap: fix leaking reference countJason Wang2013-01-111-3/+9
| | | | | | | | | | | | | | Reference count leaking of both module and sock were found: - When a detached file were closed, its sock refcnt from device were not released, solving this by add the sock_put(). - The module were hold or drop unconditionally in TUNSETPERSIST, which means we if we set the persist flag for N times, we need unset it for another N times. Solving this by only hold or drop an reference when there's a flag change and also drop the reference count when the persist device is deleted. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tuntap: forbid calling TUNSETIFF when detachedJason Wang2013-01-111-2/+3
| | | | | | | | | | | | | Michael points out that even after Stefan's fix the TUNSETIFF is still allowed to create a new tap device. This because we only check tfile->tun but the tfile->detached were introduced. Fix this by failing early in tun_set_iff() if the file is detached. After this fix, there's no need to do the check again in tun_set_iff(), so this patch removes it. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tuntap: switch to use rtnl_dereference()Jason Wang2013-01-111-17/+10
| | | | | | | | Switch to use rtnl_dereference() instead of the open code, suggested by Eric. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlge: remove NETIF_F_TSO6 flagAmerigo Wang2013-01-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | It is werid that qlge driver supports NETIF_F_TSO6 but not NETIF_F_IPV6_CSUM. This also causes some kernel warning [1] when VLAN device setups on a qlge interface. I think the qlge hardware doesn't support NETIF_F_IPV6_CSUM, so we have to just remove the NETIF_F_TSO6 flag. After this patch, the TCP/IPv6 traffic becomes normal again, no kernel warnings any more. NOTE: I only tested it on 2.6.32 kernel, even if the upstream kernel could fix this automatically (it is hard to track NETIF* flags), removing it is also safe. 1. https://bugzilla.redhat.com/show_bug.cgi?id=891839 Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Cc: linux-driver@qlogic.com Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: xilinx: Do not use NO_IRQ in axienetMichal Simek2013-01-101-1/+1
| | | | | | | | | | | | | | This driver is used on Microblaze and will be used on Arm Zynq. Microblaze doesn't define NO_IRQ and no IRQ is 0. Arm still uses NO_IRQ as -1 and there is no option to connect IRQ to irq 0. That's why <= 0 is only one option how to find out undefined IRQ. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: xilinx: Do not use axienet on PPCMichal Simek2013-01-101-1/+1
| | | | | | | | | Axi ethernet can't be used on PPC because it is little endian IP and PPC is big endian. This system can't be designed. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Allow management traffic after boot from SANBarak Witkowski2013-01-101-8/+52
| | | | | | | | | | | | | | | | As part of the previous driver unload flow, whenever bnx2x is loaded after the UNDI driver it closes all Rx traffic. However, this leads to management traffic also being stopped until the network interface associated with one of its functions gets loaded. To remedy this, management traffic is re-opened once the 'cleaning' after the previous driver ends. Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Fix fastpath structures when memory allocation failsYuval Mintz2013-01-101-2/+28
| | | | | | | | | | | | | | | When allocating Tx queues, if for some reason (e.g., lack of memory) allocation fails, driver will incorrectly calculate the pointers of the various queues. This patch repositions all pointers in such a case to point at sequential structures in memory, allowing the bnx2x macros to be used correctly when accessing them. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bfin_mac: Restore hardware time-stamping dependency on BF518Lars-Peter Clausen2013-01-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | Commit 70ac618c07 ("ptp: fixup Kconfig for two PHC drivers.") removed all dependencies for the blackfin hardware time-stamping Kconfig entry. Hardware time-stamping is only available on BF518 though. Since the Kconfig entry is 'default y', just updateing your kernel source and running `make defconfig` will result in the the following build errors: drivers/net/ethernet/adi/bfin_mac.c:694: error: implicit declaration of function ‘bfin_read_EMAC_PTP_CTL’ drivers/net/ethernet/adi/bfin_mac.c:702: error: implicit declaration of function ‘bfin_write_EMAC_PTP_FV3’ drivers/net/ethernet/adi/bfin_mac.c:712: error: implicit declaration of function ‘bfin_write_EMAC_PTP_CTL’ drivers/net/ethernet/adi/bfin_mac.c:717: error: implicit declaration of function ‘bfin_write_EMAC_PTP_FOFF’ ... This patch adds back the dependency on BF518, and since it does not make sense to expose this config option when the blackfin MAC driver is not enabled also restore the dependency on BFIN_MAC. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tun: avoid owner checks on IFF_ATTACH_QUEUEMichael S. Tsirkin2013-01-101-2/+0
| | | | | | | | | | | | | At the moment, we check owner when we enable queue in tun. This seems redundant and will break some valid uses where fd is passed around: I think TUNSETOWNER is there to prevent others from attaching to a persistent device not owned by them. Here the fd is already attached, enabling/disabling queue is more like read/write. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: move debugging code before the returnDan Carpenter2013-01-101-1/+1
| | | | | | | | I move the return down a line after the debugging printk. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tuntap: refuse to re-attach to different tun_structStefan Hajnoczi2013-01-101-0/+2
| | | | | | | | | | | | | | | | | Multiqueue tun devices support detaching a tun_file from its tun_struct and re-attaching at a later point in time. This allows users to disable a specific queue temporarily. ioctl(TUNSETIFF) allows the user to specify the network interface to attach by name. This means the user can attempt to attach to interface "B" after detaching from interface "A". The driver is not designed to support this so check we are re-attaching to the right tun_struct. Failure to do so may lead to oops. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵John W. Linville2013-01-0927-39/+6278
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
| * b43: Fix firmware loading when driver is built into the kernelLarry Finger2013-01-073-16/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recent versions of udev cause synchronous firmware loading from the probe routine to fail because the request to user space would time out. The original fix for b43 (commit 6b6fa58) moved the firmware load from the probe routine to a work queue, but it still used synchronous firmware loading. This method is OK when b43 is built as a module; however, it fails when the driver is compiled into the kernel. This version changes the code to load the initial firmware file using request_firmware_nowait(). A completion event is used to hold the work queue until that file is available. This driver reads several firmware files - the remainder can be read synchronously. On some test systems, the async read fails; however, a following synch read works, thus the async failure falls through to the sync try. Reported-and-Tested by: Felix Janda <felix.janda@posteo.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> (V3.4+) Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * drivers/net/wireless/iwlegacy: use strlcpy instead of strncpyChen Gang2013-01-071-1/+1
| | | | | | | | | | | | | | The fields must be null-terminated, or simple_strtoul will cause issue. Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * drivers/net/wireless/mwl8k.c: avoid use-after-freeNickolai Zeldovich2013-01-071-1/+3
| | | | | | | | | | | | | | | | Do not dereference p->station_id after kfree(cmd) because p points into the cmd data structure. Signed-off-by: Nickolai Zeldovich <nickolai@csail.mit.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rtlwifi: Fix typo in debug output of rtl8192c and rtl8723aeJulian Wollrath2013-01-072-2/+2
| | | | | | | | | | | | Signed-off-by: Julian Wollrath <jwollrath@web.de> Acked-by: Larry Finger <Larry.finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wireless: add new wil6210 802.11ad 60GHz driverVladimir Kondratiev2013-01-0416-0/+6195
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the 60 GHz 802.11ad Wilocity card through a new driver, wil6210. Wilocity implemented the firmware, QCA maintains the device driver. Currently supported: - STA: with security - AP: limited to 1 connected STA, security disabled - Monitor: due to a hardware/firmware limitation either control or non-control frames are monitored Using a STA and AP with this drive, one can assemble a fully functional BSS. Throughput of 1.2Gbps is achieved with iperf. The wil6210 cards have on-board flash memory for the firmware, the cards comes pre-flashed and no firmware download is required. For more details see: http://wireless.kernel.org/en/users/Drivers/wil6210 Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mwifiex: fix typo in setting up ibss network parametersAmitkumar Karwar2013-01-041-1/+1
| | | | | | | | | | | | | | | | | | commit 683b6d3... "cfg80211: pass a channel definition struct" accidentally changed "==" to "!=". Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mwifiex: check wait_event_interruptible return valueBing Zhao2013-01-041-11/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | wait_event_interruptible function returns -ERESTARTSYS if it's interrupted by a signal. Driver should check the return value and handle this case properly. In mwifiex_wait_queue_complete() routine, as we are now checking wait_event_interruptible return value, the condition check is not required. Also, we have removed mwifiex_cancel_pending_ioctl() call to avoid a chance of sending second command to FW by other path as soon as we clear current command node. FW can not handle two commands simultaneously. Cc: "3.6+" <stable@vger.kernel.org> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * Merge branch 'for-john' of ↵John W. Linville2013-01-042-7/+18
| |\ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
| | * iwlwifi: fix the reclaimed packet tracking upon flush queueEmmanuel Grumbach2013-01-031-7/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's a bug in the currently released firmware version, the sequence control in the Tx response isn't updated in all cases. Take it from the packet as a workaround. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * iwlwifi: fix PCIe interrupt handle return valueJohannes Berg2013-01-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By accident, commit eb6476441bc2fecf6232a87d0313a85f8e3da7f4 ("iwlwifi: protect use_ict with irq_lock") changed the return value of the iwl_pcie_isr() function in case it handles an interrupt -- it now returns IRQ_NONE instead of IRQ_HANDLED. Put back the correct return value. Cc: stable@vger.kernel.org Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | xen/netfront: improve truesize trackingIan Campbell2013-01-071-23/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using RX_COPY_THRESHOLD is incorrect if the SKB is actually smaller than that. We have already accounted for this in NETFRONT_SKB_CB(skb)->pull_to so use that instead. Fixes WARN_ON from skb_try_coalesce. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Sander Eikelenboom <linux@eikelenboom.it> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: annie li <annie.li@oracle.com> Cc: xen-devel@lists.xen.org Cc: netdev@vger.kernel.org Cc: stable@kernel.org # 3.7.x only Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | Merge branch 'master' of ↵John W. Linville2013-01-0413-13/+72
|\ \ \ | |/ / | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
| * | ath9k: Fix Kconfig for ATH9K_HTCVladimir Kondratiev2013-01-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ath9k consists of 2 different sub-modules: ATH9K and ATH9K_HTC. Both uses common Atheros code from ath.ko and need ATH_COMMON. However, while ATH9K selects ATH_COMMON, ATH9K_HTC does not. As result, if ATH9K_HTC is the only Atheros card selected, compilation fails with unresolved symbols. This patch moves ATH_COMMON selection to the common part for both ATH9K and ATH9K_HTC Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | brcmfmac: fix parsing rsn ie for ap mode.Hante Meuleman2013-01-021-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RSN IEs got incorrectly parsed and therefore ap mode using WPA2 security was not working. Cc: stable@vger.kernel.org Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | brcmsmac: add copyright information for CanonicalArend van Spriel2013-01-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patches from Canonical involved the introduction of new source files debug.[ch]. That coincided with other patches from Broadcom introducing the same files. Cc: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | rtlwifi: rtl8723ae: Fix warning for unchecked pci_map_single() callLarry Finger2013-01-021-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | Kernel 3.8 implements checking of all DMA mapping calls and issues a WARNING for the first it finds that is not checked. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | rtlwifi: rtl8192se: Fix warning for unchecked pci_map_single() callLarry Finger2013-01-021-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | Kernel 3.8 implements checking of all DMA mapping calls and issues a WARNING for the first it finds that is not checked. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | rtlwifi: rtl8192de: Fix warning for unchecked pci_map_single() callLarry Finger2013-01-021-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | Kernel 3.8 implements checking of all DMA mapping calls and issues a WARNING for the first it finds that is not checked. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | rtlwifi: rtl8192ce: Fix warning for unchecked pci_map_single() callLarry Finger2013-01-021-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | Kernel 3.8 implements checking of all DMA mapping calls and issues a WARNING for the first it finds that is not checked. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | rtlwifi: Fix warning for unchecked pci_map_single() callLarry Finger2013-01-021-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | Kernel 3.8 implements checking of all DMA mapping calls and issues a WARNING for the first it finds that is not checked. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | p54usb: add USBIDs for two more p54usb devicesChristian Lamparter2013-01-021-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds USBIDs for: - DrayTek Vigor 530 - Zoom 4410a It also adds a note about Gemtek WUBI-100GW and SparkLAN WL-682 USBID conflict [WUBI-100GW is a ISL3886+NET2280 (LM86 firmare) solution, whereas WL-682 is a ISL3887 (LM87 firmware)] device. Source: <http://www.wikidevi.com/wiki/Intersil/p54/usb/windows> Cc: <stable@vger.kernel.org> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | rtlwifi: Don't leak on error in _rtl_usb_receive()Jesper Juhl2013-01-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We fail to release 'urb' if '_rtl_prep_rx_urb()' fails in _rtl_usb_receive(). This patch should take care of the leak. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | ath9k_hw: Fix RX gain initvals for AR9485Sujith Manoharan2013-01-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Populate iniModesRxGain with the correct initvals array for AR9485 v1.1 Cc: stable@vger.kernel.org Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | brcmsmac: Use udelay instead of usleep_rangeNiels Ole Salscheider2013-01-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | wlc_lcnphy_rx_iq_cal_gain is called during initialization, i. e. when executing brcms_up. But brcms_up is called from brcms_ops_start while the latter holds a spin lock. Thus, we cannot use usleep_range but have to use udelay. This fixes: BUG: scheduling while atomic: NetworkManager/1652/0x00000200 [...] Call Trace: [<ffffffff81582522>] __schedule_bug+0x48/0x54 [<ffffffff815892b6>] __schedule+0x596/0x6d0 [<ffffffff81589719>] schedule+0x29/0x70 [<ffffffff8158893c>] schedule_hrtimeout_range_clock+0xfc/0x140 [<ffffffff81060f10>] ? update_rmtp+0x70/0x70 [<ffffffff81588993>] schedule_hrtimeout_range+0x13/0x20 [<ffffffff810495e0>] usleep_range+0x40/0x50 [<ffffffffa05dedcb>] wlc_lcnphy_rx_iq_cal.constprop.10+0x59b/0xa90 [brcmsmac] [<ffffffffa05df4ce>] wlc_lcnphy_periodic_cal+0x20e/0x220 [brcmsmac] [<ffffffffa05dce8d>] ? wlc_lcnphy_set_tx_pwr_ctrl+0x21d/0x3c0 [brcmsmac] [<ffffffffa05e0cfc>] wlc_phy_init_lcnphy+0xacc/0x1100 [brcmsmac] [<ffffffffa05e0230>] ? wlc_phy_txpower_recalc_target_lcnphy+0x90/0x90 [brcmsmac] [<ffffffffa05d7c7d>] wlc_phy_init+0xcd/0x170 [brcmsmac] [<ffffffffa05c9dfe>] brcms_b_bsinit.isra.65+0x12e/0x310 [brcmsmac] [<ffffffffa05d061b>] brcms_c_init+0x8fb/0x1170 [brcmsmac] [<ffffffffa05c3a0a>] brcms_init+0x5a/0x70 [brcmsmac] [<ffffffffa05ce76c>] brcms_c_up+0x1ac/0x4a0 [brcmsmac] [<ffffffffa05c3c65>] brcms_up+0x25/0x30 [brcmsmac] [<ffffffffa05c44c0>] brcms_ops_start+0xd0/0x100 [brcmsmac] [...] Signed-off-by: Niels Ole Salscheider <niels_ole@salscheider-online.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | p54usb: add USB ID for T-Com Sinus 154 data IITomasz Guszkowski2013-01-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Added USB ID for T-Com Sinus 154 data II. Cc: <stable@vger.kernel.org> Signed-off-by: Tomasz Guszkowski <tsg@o2.pl> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | carl9170: fix -EINVAL bailout during init with !CONFIG_MAC80211_MESHChristian Lamparter2013-01-021-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sean reported that as of 3.7, his AR9170 device no longer works because the driver fails during initialization. He noted this is due to: "In carl9170/fw.c, ar->hw->wiphy is tagged with NL80211_IFTYPE_MESH_POINT support if the firmware has Content after Beacon Queuing. This is both in interface_modes and the only iface_combinations entry. If CONFIG_MAC80211_MESH is not set, ieee80211_register_hw removes NL80211_IFTYPE_MESH_POINT from interface_modes, but not iface_combinations. wiphy_register then checks to see if every interface type in every interface combination is in interface_modes. NL80211_IFTYPE_MESH_POINT was removed, so you get a WARN_ON warning and it returns -EINVAL, giving up." Unfortunately, the iface_combination (types) feature bitmap in ieee80211_iface_limit is part of a const member in the ieee80211_iface_combination struct. Hence, the MESH_POINT feature flag can't be masked by wiphy_register in the same way as interface_modes in ieee80211_register_hw. Cc: <stable@vger.kernel.org> Reported-by: Sean Patrick Santos <quantheory@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Tested-by: Sean Patrick Santos <quantheory@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | rtlwifi: fix incorrect use of usb_alloc_coherent with usb_control_msgJussi Kivilinna2013-01-021-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Incorrect use of usb_alloc_coherent memory as input buffer to usb_control_msg can cause problems in arch DMA code, for example kernel BUG at 'arch/arm/include/asm/dma-mapping.h:321' on ARM (linux-3.4). Change _usb_writeN_sync use kmalloc'd buffer instead. Cc: stable@vger.kernel.org Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | ath9k: Fix compilation breakageSujith Manoharan2013-01-021-1/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since ath9k makes use of mac80211's debugfs hooks to maintain station statistics, make ATH9K_DEBUGFS select MAC80211_DEBUGFS. This fixes the issue reported by Fengguang Wu: drivers/net/wireless/ath/ath9k/debug.c: In function 'ath9k_sta_add_debugfs': drivers/net/wireless/ath/ath9k/debug.c:1589:4: error: 'struct ath_node' has no member named 'node_stat' drivers/net/wireless/ath/ath9k/debug.c: In function 'ath9k_sta_remove_debugfs': drivers/net/wireless/ath/ath9k/debug.c:1599:19: error: 'struct ath_node' has no member named 'node_stat' Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | vxlan: allow live mac address changestephen hemminger2013-01-031-0/+1
| | | | | | | | | | | | | | | | | | The VXLAN pseudo-device doesn't care if the mac address changes when device is up. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Reviewed-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
* | forcedeth: Fix WARNINGS that result when DMA mapping is not checkedLarry Finger2012-12-281-0/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With 3.8-rc1, the first call of pci_map_single() that is not checked with a corresponding pci_dma_mapping_error() call results in a warning with a splat as follows: WARNING: at lib/dma-debug.c:933 check_unmap+0x480/0x950() Hardware name: HP Pavilion dv2700 Notebook PC forcedeth 0000:00:0a.0: DMA-API: device driver failed to check map error[device address=0x00000000b176e002] [size=90 bytes] [mapped as single] Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: qmi_wwan: add Telekom Speedstick LTE IIBjørn Mork2012-12-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | also known as Alcatel One Touch L100V LTE The driver description files gives these names to the vendor specific functions on this modem: Application1: VID_1BBB&PID_011E&MI_00 Application2: VID_1BBB&PID_011E&MI_01 Modem: VID_1BBB&PID_011E&MI_03 Ethernet: VID_1BBB&PID_011E&MI_04 Reported-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2012-12-277-40/+21
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) GRE tunnel drivers don't set the transport header properly, they also blindly deref the inner protocol ipv4 and needs some checks. Fixes from Isaku Yamahata. 2) Fix sleeps while atomic in netdevice rename code, from Eric Dumazet. 3) Fix double-spinlock in solos-pci driver, from Dan Carpenter. 4) More ARP bug fixes. Fix lockdep splat in arp_solicit() and then the bug accidentally added by that fix. From Eric Dumazet and Cong Wang. 5) Remove some __dev* annotations that slipped back in, as well as all HOTPLUG references. From Greg KH 6) RDS protocol uses wrong interfaces to access scatter-gather elements, causing a regression. From Mike Marciniszyn. 7) Fix build error in cpts driver, from Richard Cochran. 8) Fix arithmetic in packet scheduler, from Stefan Hasko. 9) Similarly, fix association during calculation of random backoff in batman-adv. From Akinobu Mita. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (21 commits) ipv6/ip6_gre: set transport header correctly ipv4/ip_gre: set transport header correctly to gre header IB/rds: suppress incompatible protocol when version is known IB/rds: Correct ib_api use with gs_dma_address/sg_dma_len net/vxlan: Use the underlying device index when joining/leaving multicast groups tcp: should drop incoming frames without ACK flag set netprio_cgroup: define sk_cgrp_prioidx only if NETPRIO_CGROUP is enabled cpts: fix a run time warn_on. cpts: fix build error by removing useless code. batman-adv: fix random jitter calculation arp: fix a regression in arp_solicit() net: sched: integer overflow fix CONFIG_HOTPLUG removal from networking core Drivers: network: more __dev* removal bridge: call br_netpoll_disable in br_add_if ipv4: arp: fix a lockdep splat in arp_solicit() tuntap: dont use a private kmem_cache net: devnet_rename_seq should be a seqcount ip_gre: fix possible use after free ip_gre: make ipgre_tunnel_xmit() not parse network header as IP unconditionally ...
| * net/vxlan: Use the underlying device index when joining/leaving multicast groupsYan Burman2012-12-261-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | The socket calls from vxlan to join/leave multicast group aren't using the index of the underlying device, as a result the stack uses the first interface that is up. This results in vxlan being non functional over a device which isn't the 1st to be up. Fix this by providing the iflink field to the vxlan instance to the multicast calls. Signed-off-by: Yan Burman <yanb@mellanox.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * cpts: fix a run time warn_on.Richard Cochran2012-12-261-1/+1
| | | | | | | | | | | | | | | | This patch fixes a warning in clk_enable by calling clk_prepare_enable instead. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * cpts: fix build error by removing useless code.Richard Cochran2012-12-262-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | The cpts driver tries to obtain the input clock frequency by calling the clock's internal 'recalc' method. Since <plat/clock.h> has been removed, this code can no longer compile. However, the driver never makes use of the frequency value, so this patch fixes the issue by removing the offending code altogether. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Drivers: network: more __dev* removalGreg KH2012-12-223-14/+13
| | | | | | | | | | | | | | | | | | Remove some __dev* markings that snuck in the 3.8-rc1 merge window in the drivers/net/* directory. Cc: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud