summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/wl12xx
Commit message (Collapse)AuthorAgeFilesLines
* wl12xx: Unset bssid filter, ssid and bssid from firmware on disassocJuuso Oikarinen2010-11-221-1/+4
| | | | | | | | | | | | | | | | | On the disassociation event from the mac80211, the wl12xx driver does not clear the chipset configuration related to the AP - i.e. it does not perform a DISCONNECT and then a JOIN with zero SSID and dummy BSSID. Also, it does not unset the BSSID filter. Often this is not a problem, as the above is performed upon entering idle state. But if a scenario arises where a new association is attempted without cycling through idle state, the new association will fail. Fix this by resetting the firmware state on disassociation. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* wl1271: add support for HW TX fragmentationArik Nemtsov2010-11-224-5/+34
| | | | | | | | | Indicate to mac80211 we support HW fragmentation. Support updates of the fragmentation threshold via the set_frag_threshold callback. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* Revert "wl1271: Change supported channel order for a more optimal scan"Juuso Oikarinen2010-11-221-46/+40
| | | | | | | | | | | This reverts commit fa21c7a9e4be439e217fe72edbd39b643b643791. The reverted patch caused more harm than benefit. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Tested-by: Tuomas Katila <ext-tuomas.2.katila@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* wl1271: Prevent ad-hoc and active scanning on 11a DFS frequenciesJuuso Oikarinen2010-11-221-0/+23
| | | | | | | | | | The wl1271 does not support radar detection. Hence, prevent ad-hoc and active scanning on frequencies requiring DFS. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Tested-by: Tuomas Katila <ext-tuomas.2.katila@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* wl1271: cleanup unused code of calibration structuresGery Kahn2010-11-221-48/+0
| | | | | | | | The cleanup unused code for calibration procedures. Signed-off-by: Gery Kahn <geryk@ti.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* wl1271: Change wl12xx Files NamesShahar Levi2010-11-2233-151/+154
| | | | | | | | | All files name prefix removed due to the fact that wl12xx driver supports wl1271 and wl1273. Also the definition in Kconfig and header files changed respectively. Signed-off-by: Shahar Levi <shahar_levi@ti.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* wl1251: use wl12xx_platform_data to pass dataGrazvydas Ignotas2010-11-151-1/+1
| | | | | | | | | | | | Make use the newly added method to pass platform data for wl1251 too. This allows to eliminate some redundant code. Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Kalle Valo <kvalo@adurom.com> Acked-by: Luciano Coelho <luciano.coelho@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: add recover testmode commandEliad Peller2010-11-151-0/+12
| | | | | | | | | add RECOVER testmode command. this command triggers a recovery sequence (by enqueueing a recovery_work). Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* wl1271: handle HW watchdog interruptEliad Peller2010-11-152-1/+11
| | | | | | | | | unmask the WL1271_ACX_INTR_WATCHDOG interrupt. when getting it - enqueue a recovery work and bail out. Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* wl1271: refactor debugfs function generation codeEliad Peller2010-11-151-104/+111
| | | | | | | | | | | refactor wl1271_debugfs by using a format&copy function, instead of duplicating the code for each generated function. this change reduces about 3Kb from wl1271.ko Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* wl1271: set wl->vif only if add_interface succeeded.Eliad Peller2010-11-151-13/+20
| | | | | | | | | set wl->vif to the newly created interface only after the firmware booted successfully. on the way - make the function flow more clear. Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* wl1271: Check interface state in op_* functionsJuuso Oikarinen2010-11-151-2/+22
| | | | | | | | | | | | | | Check the state of the interface on op_* function so we don't try to access the hardware in when its off. The mac80211 may call these in some corner cases related, for instance, to the hardware recovery procedure. These accesses cause a kernel crash on at least some SDIO devices, because the bus is not properly claimed in that scenario. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* wl1271: Fix scan failure detectionJuuso Oikarinen2010-11-152-5/+17
| | | | | | | | | | | | In scan_complete_work, because the mutex is released before accessing the scan->failed flag, it is possible for unfounded hardware recovery rounds to be executed. Fix this. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* wl1271: Fix RX path stallJuuso Oikarinen2010-11-151-4/+8
| | | | | | | | | | | | | | | | | | The wl1271_rx function loops through packets in an aggregated buffer. Each packet in the buffer is handled by a call to wl1271_rx_handle_data, which will fail if skb memory allocation fails or production mode is enabled. These failures currently prevent the rx counters to be incremented, thus causing the rx loop to run forever. Fix this by ignoring error codes reported wl1271_rx_handle_data function. This essentially means that frames will be dropped in production mode, which is the intetion, and frames will be dropped if memory allocation fails, which is a decent way to recover from that situation. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Tested-by: Tuomas Katila <ext-tuomas.2.katila@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* wireless/wl1271: remove redundant if-statement v2Nicolas Kaiser2010-11-151-2/+0
| | | | | | | | wl1271_ps_elp_sleep() is void and cannot return a value. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* wl1271: exit ELP mode when setting enabled rates in txLuciano Coelho2010-11-151-0/+5
| | | | | | | | | | This bug was being triggered by a call to acx_rate_policies in tx_work without calling ps_elp_wakeup first. If we have full PSM enabled, this happens rather often, immediately after association. Reported-by: Tuomas Katila <ext-tuomas.2.katila@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Tested-by: Tuomas Katila <ext-tuomas.2.katila@nokia.com>
* wl1271: Fix warning about unsupported RX rateTeemu Paasikivi2010-11-155-7/+15
| | | | | | | | | | | | | While scanning, it is possible that beacon and probe response frames are received on other band than configured to the driver. In rx status handling this has caused "Unsupported RX rate from HW" warnings. This patch changes the wl1271_rate_to_index function to take the band of the received frame as a parameter instead of using value configuret to wl->band. Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* wl1271: 11n Support, functionality and configuration abilityShahar Levi2010-11-154-18/+105
| | | | | | | | | | Add 11n ability in scan, connection and using MCS rates. The configuration is temporary due to the code incomplete and still in testing process. That plans to be remove in the future. Signed-off-by: Shahar Levi <shahar_levi@ti.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* wl1271: 11n Support, ACX CommandsShahar Levi2010-11-152-0/+88
| | | | | | | | Added ACX command to the FW for 11n support. Signed-off-by: Shahar Levi <shahar_levi@ti.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* wl1271: 11n Support, Add DefinitionsShahar Levi2010-11-153-1/+106
| | | | | | | | | Two acx commands: ht_capabilities & ht_information, 11n sta capabilities macro. Signed-off-by: Shahar Levi <shahar_levi@ti.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* wl1271: Fix TX queue low watermark handlingIdo Yariv2010-11-151-13/+22
| | | | | | | | | | | | | | | | | | The number of entries in the TX queue is compared to the low watermark value each time TX completion interrupts are handled. However, the fact that a TX completion arrived does not necessarily mean there are any less skbs in the TX queue. In addition, a TX completion interrupt does not necessarily mean that there are any new available TX blocks. Thus, queuing TX work when the low watermark is reached might not be needed. Fix this by moving the low watermark handling to the TX work function, and avoid queuing TX work in this case. Signed-off-by: Ido Yariv <ido@wizery.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* wl1271: Allocate TX descriptors more efficientlyIdo Yariv2010-11-153-16/+24
| | | | | | | | | | | | On each TX descriptor allocation, a free entry is found by traversing the TX descriptors array. Improve this by holding a bitmap of all TX descriptors, and using efficient bit operations to search for free entries. Signed-off-by: Ido Yariv <ido@wizery.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* wl1271: Fix TX starvationIdo Yariv2010-11-154-8/+27
| | | | | | | | | | | | | | | While wl1271_irq_work handles RX directly (by calling wl1271_rx), a different work is scheduled for transmitting packets. The IRQ work might handle more than one interrupt during a single call, including multiple TX completion interrupts. This might starve TX, since no packets are transmitted until all interrupts are handled. Fix this by calling the TX work function directly, instead of deferring it. Signed-off-by: Ido Yariv <ido@wizery.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* wl1271: TX aggregation optimizationIdo Yariv2010-11-151-8/+19
| | | | | | | | | | | | | | In case the aggregation buffer is too small to hold all available packets, the buffer is transferred to the FW and no more packets are aggregated. Although there may be enough available TX blocks, no additional packets will be handled by the current TX work. Fix this by flushing the aggregation buffer when it's full, and continue transferring packets as long as there are enough available TX blocks. Signed-off-by: Ido Yariv <ido@wizery.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* wl1271: ref_clock cosmetic changesGery Kahn2010-11-151-6/+4
| | | | | | | Cosmetic cleanup for ref_clock code while configured by board. Signed-off-by: Gery Kahn <geryk@ti.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds2010-10-2351-10882/+941
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1699 commits) bnx2/bnx2x: Unsupported Ethtool operations should return -EINVAL. vlan: Calling vlan_hwaccel_do_receive() is always valid. tproxy: use the interface primary IP address as a default value for --on-ip tproxy: added IPv6 support to the socket match cxgb3: function namespace cleanup tproxy: added IPv6 support to the TPROXY target tproxy: added IPv6 socket lookup function to nf_tproxy_core be2net: Changes to use only priority codes allowed by f/w tproxy: allow non-local binds of IPv6 sockets if IP_TRANSPARENT is enabled tproxy: added tproxy sockopt interface in the IPV6 layer tproxy: added udp6_lib_lookup function tproxy: added const specifiers to udp lookup functions tproxy: split off ipv6 defragmentation to a separate module l2tp: small cleanup nf_nat: restrict ICMP translation for embedded header can: mcp251x: fix generation of error frames can: mcp251x: fix endless loop in interrupt handler if CANINTF_MERRF is set can-raw: add msg_flags to distinguish local traffic 9p: client code cleanup rds: make local functions/variables static ... Fix up conflicts in net/core/dev.c, drivers/net/pcmcia/smc91c92_cs.c and drivers/net/wireless/ath/ath9k/debug.c as per David
| * Merge branch 'master' of ↵John W. Linville2010-10-1529-10274/+37
| |\ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
| | * wl1251: move to it's own directoryKalle Valo2010-10-1128-10268/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | wl1271 driver is under heavy development but on the other hand the older wl1251 driver is currently considered more as a legacy driver. To make it easier to develop wl1271 features move wl1251 to it's own directory, drivers/net/wireless/wl1251. There are no functional changes, only moving of files. One regression is that Kconfig won't be updated automatically and user needs to enable wl1251 manually with an older config file. Signed-off-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * wl1271: sdio: add suspend/resume supportOhad Ben-Cohen2010-10-081-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add required suspend/resume support to prevent the SDIO core from removing our card completely during system suspend. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Tested-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
| | * wl1271: sdio: enable runtime PMOhad Ben-Cohen2010-10-081-6/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable runtime PM for the wl1271 SDIO device. We request power whenever the WLAN interface is brought up, and release it after the WLAN interface is taken down. As a result, power is released immediately after probe returns, since at that point power has not been explicitly requested yet (i.e. the WLAN interface is still down). Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Acked-by: Luciano Coelho <luciano.coelho@nokia.com> Tested-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
| * | Merge branch 'master' of ↵John W. Linville2010-10-0820-540/+786
| |\ \ | | |/ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: Documentation/feature-removal-schedule.txt drivers/net/wireless/ipw2x00/ipw2200.c
| | * wl1271: Support FEM autodetectionJuuso Oikarinen2010-10-071-4/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the NVS/INI-parameters for the driver/firmware there is the FEM (front end module) selection option, which may configure the hardware FEM via autodetection or manual selection. So far, there has been support for manual selection only. Add support for FEM autodetection. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * Merge branch 'wireless-next' of ↵John W. Linville2010-10-0520-536/+769
| | |\ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx
| | | * wl1271: remove deprecated __attribute__ ((packed))Luciano Coelho2010-10-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | One __attribute__ ((packed)) has been accidentally introduced in commit be86cbea1e9c3a4dd8faedcfa327495d09fe3531. This patch changes it to __packed. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
| | | * wl1271: Add extended radio parameter initializationJuuso Oikarinen2010-10-055-6/+90
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently a command to initialize extended radio parameter tables in the hardware is missing. Add the initialization Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
| | | * wl1271: Indicate disconnection on hardware failureJuuso Oikarinen2010-10-051-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the event of a hardware failure, reconfiguring a live connection back with the wl1271 chip does not work as expected. The chip has management features which require setting up the association from scratch to work correctly. To ensure this is done every time, in managed mode, when associated, indicate connection loss to the mac80211 before asking to reconfigure the hardware. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Tested-by: Tuomas Katila <ext-tuomas.2.katila@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
| | | * wl1271: Move work-init calls to hw allocationJuuso Oikarinen2010-10-051-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to legacy reason, dating back to when the wl1251 and wl1271 still were a unified driver, some work-structures are initialized on hardware startup. The hardware recovery code creates a scenario in which it is possible for a workstruct to be re-initialized while the work-function itself is running, which causes a kernel WARNing and a subsequent reboot. To remedy this, move the work initialization calls to the hw allocation, which is the logically correct place for them anyway. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Tested-by: Tuomas Katila <ext-tuomas.2.katila@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
| | | * wl1271: Support firmware TX packet aggregationIdo Yariv2010-10-051-62/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of sending one packet at a time to the firmware, try to send all available packets at once. This optimization decreases the number of transactions, which saves CPU cycles and increases network throughput. Signed-off-by: Ido Yariv <ido@wizery.com> Tested-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
| | | * wl1271: Support firmware RX packet aggregationIdo Yariv2010-10-053-17/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of retrieving one packet at a time from the firmware, try to retrieve all available packets at once. This optimization decreases the number of transactions, which saves CPU cycles and increases network throughput. Signed-off-by: Ido Yariv <ido@wizery.com> Tested-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
| | | * wl1271: Handle large SPI transfersIdo Yariv2010-10-051-54/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The HW supports up to 4095 bytes transfers via SPI. The SPI read & write operations do not handle larger transfers, causing the HW to stall in such cases. Fix this by fragmenting large transfers into smaller chunks, and transferring each one separately. Signed-off-by: Ido Yariv <ido@wizery.com> Tested-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
| | | * wl1271: Add support for hardware GEM cipherJuuso Oikarinen2010-09-283-1/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the hardware GEM cipher suite. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
| | | * wl1271: Increase connection reliabilityJuuso Oikarinen2010-09-284-15/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch improves connection reliability by choosing the lowest basic rate for null-func frames (which increases their range, as the firmware does not do rate fall-back for null-func frames.) Also, increase the PSM entry retry-counter. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Tested-by: Tuomas Katila <ext-tuomas.2.katila@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
| | | * wl1271: Optimize scan durationJuuso Oikarinen2010-09-284-9/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently then dwell times for each channel in scans is set to an overly long value, and excessive number of probe-requests are transmitted on each channel (for active scans.) Based on testing, comparable results can be received with smaller dwell-time, and, with fever probe-requests - in fact, reducing the number of probe-requests to 2 seems to increase the number of found results. Configure more optimal values for per channel dwell times. Comparison for the different scan configurations (in my current office environment): dwell-time 60000 3x probe-req == ~60 results 40000 3x probe-req == ~50 results 30000 3x probe-req == ~40 results dwell-time 60000 2x probe-req == ~70 results 40000 2x probe-req == ~60 results 30000 2x probe-req == ~58 results The above are results for a cumulative 3 scan run. For individual scans, the number of results drop slightly more. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
| | | * wl1271: Add handling for failing hardware scan commandJuuso Oikarinen2010-09-284-7/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the driver does not handle a failing hardware command to scan in any way - effectively, the scan machine will jam until the driver is shut down, and future scan requests will just return -EBUSY to user space, resulting in a type of busy-loop. The same problem occurs if the firmware fails to deliver the scan completion event - add timeout for this. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
| | | * wl1271: Add hardware recovery mechanismJuuso Oikarinen2010-09-284-3/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is some probability of hardware failures, which currently go largely undetected. Attempt to recover from these failures by shutting down the hardware, and requesting mac80211 to reconfigure it. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
| | | * wl1271: Separate interface removal to another functionJuuso Oikarinen2010-09-282-6/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Do this so the interface removal can be triggered from an upcoming hardware failure recovery mechanism. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
| | | * wl1271: Fix work cancelling when shutting down the driverJuuso Oikarinen2010-09-283-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The work cancelling has had several hazards, ranging from potentially executing work after the driver is in OFF state, to executing work after the driver and relevant memory structures are already removed. Fix these. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
| | | * wl1271: Move scan complete invocation into work functionJuuso Oikarinen2010-09-284-5/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current scan implementation can jam, if the scan request ends up containing no work. This can especially happen if there is a scan request with only 11a band channels for HW that does not support 11a. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
| | | * wl1271: Fix AC/TID default configurationJuuso Oikarinen2010-09-283-67/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The WMM queue default configuration was incorrect, and caused uapsd mode problems (among possible others.) Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
| | | * wl1271: Fix tid-configuration of TX framesJuuso Oikarinen2010-09-282-19/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Incorrect TID was configured for TX frames. This resulted in incorrect queues to be used for classes in transmission. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
OpenPOWER on IntegriCloud