summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/wl12xx/reg.h
Commit message (Collapse)AuthorAgeFilesLines
* wl12xx: use two MAC addresses based on the NVS or from fuse ROMLuciano Coelho2012-02-151-0/+27
| | | | | | | | | | | | | | | | | | | | | Add support for two MAC addresses. If the NVS has a valid MAC address, that takes precedence and we use two sequential address starting from the one specified. If the NVS doesn't contain a valid MAC address (ie. if it is set to 00:00:00:00:00:00), we check if the HW PG version in use has the BD_ADDR written in the fuse ROM. If it does, we read it and derive the two subsequent addresses for WLAN. During production, 3 addresses are reserved per device. The first for Bluetooth (burnt in the fuse ROM) and the following two for WLAN. This patch has some code by Igal and Arik (squashed from internal patches). Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Igal Chernobelsky <igalc@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
* wl12xx: increase firmware upload chunk sizeLuciano Coelho2011-11-081-1/+1
| | | | | | | | | | | | | | | | | | The chunk size used during firmware upload was set to 512, which is the size of a single SDIO block (or two). This is very inneficient because we send one or two blocks only per SDIO transaction and don't get the full benefits of sdio block transfers. This patch increases the chunk size to 16K. This more than doubles the transfer speed both in wl127x and wl128x chips, with greater impact on the latter: wl127x: 512 bytes chunk -> ~132ms 16384 bytes chunk -> ~57ms wl128x: 512 bytes chunk -> ~216ms 16384 bytes chunk -> ~37ms Signed-off-by: Luciano Coelho <coelho@ti.com>
* wl12xx: remove rx filtering stuffEliad Peller2011-08-221-75/+0
| | | | | | | | | The new fw doesn't support rx_filtering configuration (as a stand-alone command. the rx filtering is done automatically according to the active role). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
* wl12xx: 1281/1283 support - Add DefinitionsShahar Levi2011-04-191-13/+2
| | | | | | | | | | | | | | | | | | Definitions to support wl128x: - New FW file name - Chip ID - New PLL Configuration Algorithm macros that will be used at wl128x boot stage - Rename NVS macro name: wl127x and wl128x are using the same NVS file name. However, the ini parameters between them are different. The driver will validate the correct NVS size in wl1271_boot_upload_nvs(). [Cleaned up some of the definitions. -- Luca] Signed-off-by: Shahar Levi <shahar_levi@ti.com> Reviewed-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
* wl1271: Change wl12xx Files NamesShahar Levi2010-11-221-0/+614
| | | | | | | | | All files name prefix removed due to the fact that wl12xx driver supports wl1271 and wl1273. Also the definition in Kconfig and header files changed respectively. Signed-off-by: Shahar Levi <shahar_levi@ti.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* wl1251: rename reg.h to wl1251_reg.hKalle Valo2009-08-141-744/+0
| | | | | | | | | Now that wl1271 doesn't use reg.h anymore, it can be renamed to wl1251_reg.h. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1251: rename wl12xx.h to wl1251.hKalle Valo2009-07-101-1/+0
| | | | | | | | | wl12xx.h is now only used by 1251 code, so we can rename it. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl12xx: add driverKalle Valo2009-05-061-0/+745
wl12xx is a driver for TI wl1251 802.11 chipset designed for embedded devices, supporting both SDIO and SPI busses. Currently the driver supports only SPI. Adding support 1253 (the 5 GHz version) should be relatively easy. More information here: http://focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?contentId=4711&navigationId=12494&templateId=6123 (Collapsed original sequence of pre-merge patches into single commit for initial merge. -- JWL) Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
OpenPOWER on IntegriCloud