summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/b43/b43.h
Commit message (Collapse)AuthorAgeFilesLines
* b43: Fix firmware loading when driver is built into the kernelLarry Finger2013-01-071-0/+5
| | | | | | | | | | | | | | | | | | | | | Recent versions of udev cause synchronous firmware loading from the probe routine to fail because the request to user space would time out. The original fix for b43 (commit 6b6fa58) moved the firmware load from the probe routine to a work queue, but it still used synchronous firmware loading. This method is OK when b43 is built as a module; however, it fails when the driver is compiled into the kernel. This version changes the code to load the initial firmware file using request_firmware_nowait(). A completion event is used to hold the work queue until that file is available. This driver reads several firmware files - the remainder can be read synchronously. On some test systems, the async read fails; however, a following synch read works, thus the async failure falls through to the sync try. Reported-and-Tested by: Felix Janda <felix.janda@posteo.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> (V3.4+) Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: be more user friendly with PHY infoRafał Miłecki2012-08-061-0/+2
| | | | | | | | | | First of all, use PHY names instead of magic numbers. It should make configuring kernel easier in case of not enabled PHY type support. Secondly, always print info about PHY. This is really basic info about hardware and quite important for the support level. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: rename host flags definesRafał Miłecki2012-08-061-3/+5
| | | | | | | | There are more than 3 registers on new hardware. Host flags handling has to be rewritten, as we can't use u128 type to handle all 5 regs. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: fix crash with OpenFWWFJohannes Berg2012-07-171-7/+0
| | | | | | | | | | | | | | | | b43 with open firmware crashes mac80211 because it changes the number of queues at runtime which, while it was never really supported, now crashes mac80211 due to the new hardware queue logic. Fix this by detecting open vs. proprietary fw earlier and registering with mac80211 with the right number of queues. Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Cc: stable@vger.kernel.org (depends on commit a6f38ac3) Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: do not call ieee80211_unregister_hw if we are not registredOleksij Rempel2012-06-081-0/+4
| | | | | | | | | | | | this patch fixes kernel Oops on "rmmod b43" if firmware was not loaded: BUG: unable to handle kernel NULL pointer dereference at 0000000000000088 IP: [<ffffffff8104e988>] drain_workqueue+0x25/0x142 PGD 153ac6067 PUD 153b82067 PMD 0 Oops: 0000 [#1] SMP Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: Load firmware from a work queue and not from the probe routineLarry Finger2012-03-131-0/+3
| | | | | | | | | | | Recent changes in udev are causing problems for drivers that load firmware from the probe routine. As b43 has such a structure, it must be changed. As this driver loads more than 1 firmware file, changing to the asynchronous routine request_firmware_nowait() would be complicated. In this implementation, the probe routine starts a queue that calls the firmware loading routines. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: add maskset helpersRafał Miłecki2012-01-241-0/+12
| | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: add lacking boardflags definesRafał Miłecki2012-01-041-0/+11
| | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: avoid packet losses in the dma worker code.francesco.gringoli@ing.unibs.it2011-12-191-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | Following Rafal request, we verified that on "modern" CPUs using one or more workers is equivalent. Here is patch V3 that addresses the packet loss bug in the dma engine using only one worker. ------- This patch addresses a bug in the dma worker code that keeps draining packets even when the hardware queues are full. In such cases packets can not be passed down to the device and are erroneusly dropped by the code. This problem was already discussed here http://www.mail-archive.com/b43-dev@lists.infradead.org/msg01413.html and acknowledged by Michael. Number of hardware queues is now defined in b43.h (B43_QOS_QUEUE_NUM). Acknowledgements to Riccardo Paolillo <riccardo.paolillo@gmail.com> and Michele Orru <michele.orru@hotmail.it> Signed-off-by: Francesco Gringoli <francesco.gringoli@ing.unibs.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* treewide: use __printf not __attribute__((format(printf,...)))Joe Perches2011-10-311-8/+4
| | | | | | | | | | | | | | | | | Standardize the style for compiler based printf format verification. Standardized the location of __printf too. Done via script and a little typing. $ grep -rPl --include=*.[ch] -w "__attribute__" * | \ grep -vP "^(tools|scripts|include/linux/compiler-gcc.h)" | \ xargs perl -n -i -e 'local $/; while (<>) { s/\b__attribute__\s*\(\s*\(\s*format\s*\(\s*printf\s*,\s*(.+)\s*,\s*(.+)\s*\)\s*\)\s*\)/__printf($1, $2)/g ; print; }' [akpm@linux-foundation.org: revert arch bits] Signed-off-by: Joe Perches <joe@perches.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* b43: add missing MMIO definesRafał Miłecki2011-09-271-1/+39
| | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: LCN-PHY: minor fixesRafał Miłecki2011-09-131-0/+2
| | | | | | | | The biggest change is reversing order of reading 32-bit table value. MMIO dumps has shown it's done that way for LCN-PHY. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: drop Kconfig option of forcing PIO modeRafał Miłecki2011-08-261-6/+0
| | | | | | | | We have module param called use_pio which is much easier to use. Cc: Larry Finger <larry.finger@lwfinger.net> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43/legacy: Remove firmware IDsMichael Büsch2011-08-241-5/+0
| | | | | | | | | | | | This removes the "FWxx" ID strings from the b43 and b43legacy drivers. They were once used to match a specific driver revision to a set of firmware files. However, this is hardly useful today. Additionally, the IDs are not updated and maintained properly, so they might mislead users. Signed-off-by: Michael Buesch <m@bues.ch> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: fix DMA on some bugged hardwareRafał Miłecki2011-08-241-0/+1
| | | | | | | | Some hardware with 64-bit DMA uses lower address word for setting routing (translation) bit. Add workaround for such boards. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: support new TX header, noticed to be used by 598.314+ fwRafał Miłecki2011-08-221-1/+2
| | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: use enum for firmware header formatRafał Miłecki2011-08-221-0/+8
| | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: disable parity check on BCMA devicesRafał Miłecki2011-07-221-0/+1
| | | | | | | | | Analyze of MMIO dumps from BCM43224, BCM43225, BCM4313 and BCM4331 has shown that wl disables parity check for all that cards. This is required for receiving any packets from the hardware. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: bcma: define 80211 core specific IO status bitsRafał Miłecki2011-07-191-0/+6
| | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: use switches for SSB specific codeRafał Miłecki2011-07-081-1/+0
| | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: define new PHYs and radio regs for cores >= 24Rafał Miłecki2011-06-171-0/+6
| | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: add BCMA 80211 core specific definesRafał Miłecki2011-06-031-0/+11
| | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: add an option to register BROKEN bcma driverRafał Miłecki2011-06-031-0/+1
| | | | | | | | | It does nothing useful yet, so it is matched as BROKEN. For now this is just an option for b43, in future we may want to make b43 support SSB or BCMA (note: or, not xor). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: bus: abstract bus and core operationsRafał Miłecki2011-06-011-0/+23
| | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: bus: abstract R/W operationsRafał Miłecki2011-06-011-6/+6
| | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: add bus device abstraction layerRafał Miłecki2011-06-011-1/+3
| | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'for-davem' of ↵David S. Miller2011-05-251-5/+19
|\ | | | | | | ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
| * Merge ↵John W. Linville2011-05-241-5/+19
| |\ | | | | | | | | | ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
| | * b43: dma: cache translation (routing bits)Rafał Miłecki2011-05-191-0/+2
| | | | | | | | | | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * b43: add helpers for block R/W opsRafał Miłecki2011-05-191-0/+12
| | | | | | | | | | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * b43: rename b43_wldev's field with ssb_device to sdevRafał Miłecki2011-05-161-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | We free name "dev" for something generic (like dev abstraction layer). Additionaly code is cleaner now, especially magic dev->dev-dev chains. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | b43: fix comment typo reqest -> requestJim Cromie2011-05-231-2/+2
|/ / | | | | | | | | | | | | | | | | Recent trivial fix corrected 'occured', but left 'reqest'. codespell needs another dictionary entry. cc: Lucas De Marchi <lucas.demarchi@profusion.mobi> Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | Fix common misspellingsLucas De Marchi2011-03-311-1/+1
|/ | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
* b43: rename TMS defines, drop useless condition from core resetRafał Miłecki2010-12-131-4/+4
| | | | | | | | | | | | | | | As discussed we do not know band width at core reset time and it is not a good idea to reset whole just to change band. So just set unconditionally 20 MHz band width as default during core reset. As for defines PHY clock changed to band width in specs and it makes much more sens to call defines by band width which is self-explainable. Updated specs do not mention 0 value, but comparing to old ones you can notice lineral relation between PHY clock speed and band width. So it makes sense for 0x0 value to be 10 MHz band width. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: define known SPROM boardflags2 bitsRafał Miłecki2010-11-151-0/+13
| | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: define B43_SHM_SH_CHAN_40MHZRafał Miłecki2010-10-061-1/+2
| | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* drivers/net: use __packed annotationEric Dumazet2010-06-031-3/+3
| | | | | | | | | cleanup patch. Use new __packed annotation in drivers/net/ Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* b43: N-PHY: add some registers and structs definitionsRafał Miłecki2010-03-091-0/+1
| | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: fall back gracefully to PIO mode after fatal DMA errorsLinus Torvalds2010-02-261-0/+7
| | | | | | | | | | | | | | | | | This makes the b43 driver just automatically fall back to PIO mode when DMA doesn't work. The driver already told the user to do it, so rather than have the user reload the module with a new flag, just make the driver do it automatically. We keep the message as an indication that something is wrong, but now just automatically fall back to the hopefully working PIO case. (Some post-2.6.33 merge fixups by Larry Finger <Larry.Finger@lwfinger.net> and yours truly... -- JWL) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'master' of ↵John W. Linville2010-02-081-0/+1
|\ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: net/mac80211/scan.c
| * b43: Fix throughput regressionLarry Finger2010-02-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit c7ab5ef9bcd281135c21b4732c9be779585181be entitled "b43: implement short slot and basic rate handling" reduced the transmit throughput for my BCM4311 device from 18 Mb/s to 0.7 Mb/s. The basic rate handling portion is OK, the problem is in the short slot handling. Prior to this change, the short slot enable/disable routines were never called. Experimentation showed that the critical part was changing the value at offset 0x0010 in the shared memory. This is supposed to contain the 802.11 Slot Time in usec, but if it is changed from its initial value of zero, performance is destroyed. On the other hand, changing the value in the MMIO register corresponding to the Interframe Slot Time increased performance from 18 to 22 Mb/s. A BCM4306/3 also shows dramatic improvement of the transmit rate from 5.3 to 19.0 Mb/s. Other changes in the patch include removal of the magic number for the MMIO register, and allowing the slot time to be set for any PHY operating in the 2.4 GHz band. Previously, the routine was executed only for G PHYs. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> [Any stable version back through 2.6.28] Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | b43: N-PHY: add shared memory offsets definitionsRafał Miłecki2010-01-151-0/+8
| | | | | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | b43: Allow PIO mode to be selected at module loadLarry Finger2009-12-281-13/+0
|/ | | | | | | | | | | | | | | If userencounter the "Fatal DMA Problem" with a BCM43XX device, and still wish to use b43 as the driver, their only option is to rebuild the kernel with CONFIG_B43_FORCE_PIO. This patch removes this option and allows PIO mode to be selected with a load-time parameter for the module. Note that the configuration variable CONFIG_B43_PIO is also removed. Once the DMA problem with the BCM4312 devices is solved, this patch will likely be reverted. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: John Daiker <daikerjohn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: Remove deprecated 'qual' from returned RX statusLarry Finger2009-11-061-2/+0
| | | | | | | | With the deprecation of the qual member of ieee80211_rx_status, that calculation and an associated constant can be removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: Optimize PIO scratchbuffer usageMichael Buesch2009-10-271-13/+3
| | | | | | | This optimizes the PIO scratchbuffer usage. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: do not stack-allocate pio rx/tx header and tail buffersAlbert Herranz2009-10-071-76/+92
| | | | | | | | | | | The DMA-API debugging facility complains about b43 mapping memory from stack for SDIO-based cards. Indeed, b43 currently allocates the PIO RX/TX header and tail buffers from stack. The solution here is to use heap-allocated buffers instead. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: Add optional verbose runtime statisticsMichael Buesch2009-09-231-0/+4
| | | | | | | | | | This adds support for verbose runtime statistics. It defaults to off and must be enabled in debugfs, if desired. The first measurement may be incorrect, because statistics are not cleared after they got enabled through debugfs. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: Rewrite suspend/resume codeMichael Buesch2009-09-231-16/+3
| | | | | | | | | This removes most of the b43 suspend/resume code (it's handled by mac80211) and moves the registration of devices to the attachment phase. This is required, because we must not register/unregister devices on suspend/resume. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: remove SHM spinlockMichael Buesch2009-09-081-2/+0
| | | | | | | | | This removes the SHM spinlock. SHM is protected by wl->mutex. Signed-off-by: Michael Buesch <mb@bu3sch.de> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: Remove TX spinlockMichael Buesch2009-09-081-0/+5
| | | | | | | | | This removes the TX spinlock and defers TX to a workqueue to allow locking wl->mutex instead and to allow sleeping for register accesses. Signed-off-by: Michael Buesch <mb@bu3sch.de> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
OpenPOWER on IntegriCloud