summaryrefslogtreecommitdiffstats
path: root/drivers/net/wimax
Commit message (Expand)AuthorAgeFilesLines
* wimax/i2400m: support extended firmware formatInaky Perez-Gonzalez2009-10-192-59/+134
* wimax/i2400m: verify firmware format version is knownInaky Perez-Gonzalez2009-10-191-1/+7
* wimax/i2400m: fix reboot echo/ack barker deadlockInaky Perez-Gonzalez2009-10-191-12/+51
* wimax/i2400m: retry loading firmware files in sequenceInaky Perez-Gonzalez2009-10-191-18/+17
* wimax/i2400m: rework bootrom initialization to be more flexibleInaky Perez-Gonzalez2009-10-196-85/+355
* wimax/i2400m: decide properly if using signed vs non-signed firmware loadingInaky Perez-Gonzalez2009-10-191-14/+21
* wimax/i2400m: workaround not-so-working %zd printf formatInaky Perez-Gonzalez2009-10-191-2/+2
* wimax: allow specifying debug levels as command line optionInaky Perez-Gonzalez2009-10-193-0/+29
* wimax/i2400m: add missing debug submodule definitionInaky Perez-Gonzalez2009-10-191-0/+1
* wimax/i2400m: during probe, call sdio_disable at most onceInaky Perez-Gonzalez2009-10-191-3/+13
* wimax/i2400m: don't write to memory allocated by request_firmware()Cindy H Kao2009-10-191-0/+4
* wimax/i2400m: be smarter about copying command buffer to bm_cmd_bufInaky Perez-Gonzalez2009-10-193-3/+4
* wimax/i2400m/sdio: clear the INTR status bit after reading sizeCindy H Kao2009-10-191-1/+5
* wimax/i2400m: USB driver uses a configurable endpoint mapDirk Brandewie2009-10-196-17/+29
* wimax/iwmc3200: increase wait time before enable retryCindy H Kao2009-10-191-1/+1
* wimax/iwmc3200: don't disable the SDIO function if enable failsCindy H Kao2009-10-191-1/+0
* wimax/iwmc3200: overwrite SDIO IOR timeout value to avoid platform hangCindy H Kao2009-10-192-0/+10
* wimax/i2400m: Make boot retries a BUS-specific parameterDirk Brandewie2009-10-196-6/+5
* wimax/i2400m: Ensure boot mode cmd and ack buffers are alloc'd before first m...Dirk Brandewie2009-10-194-14/+64
* wimax/i2400m: Update comments to talk about SDIO reset and not USB.Dirk Brandewie2009-10-191-7/+6
* i2400m: minimal ethtool supportDan Williams2009-10-191-0/+18
* wimax: misplaced parenthesisRoel Kluin2009-10-191-1/+1
* i2400m: keep index within ms_to_errno[]Roel Kluin2009-10-191-1/+1
* wimax/i2400m: fix the bootmode RX deadlock in SDIO driverCindy H Kao2009-10-192-4/+11
* wimax/i2400m/usb: remove unnecessary power management primitive in i2400mOliver Neukum2009-10-191-1/+0
* net: Add DEVTYPE support for Ethernet based devicesMarcel Holtmann2009-09-112-0/+10
* wireless: convert drivers to netdev_tx_tStephen Hemminger2009-09-011-6/+6
* imwc3200: move iwmc3200 SDIO ids to sdio_ids.hTomas Winkler2009-07-261-7/+5
* debugfs: Fix terminology inconsistency of dir name to mount debugfs filesystem.GeunSik Lim2009-06-151-1/+1
* wimax: fix gcc warnings in sh4 when calling BUG()Inaky Perez-Gonzalez2009-06-112-2/+6
* wimax/i2400m: use -EL3RST to indicate device reset instead of -ERESTARTSYSCindy H Kao2009-06-112-3/+3
* wimax/i2400m: when bootstrap fails, reinitialize the bootromCindy H Kao2009-06-111-1/+1
* wimax/i2400m/sdio: Move all the RX code to a unified, IRQ based receive routineInaky Perez-Gonzalez2009-06-114-80/+101
* wimax/i2400m: don't reset device when bootrom init retries are exceededInaky Perez-Gonzalez2009-06-111-2/+1
* wimax/i2400m/sdio: Add device specific poke table.Dirk Brandewie2009-06-111-0/+9
* wimax/i2400m: move boot time poke table out of common driverDirk Brandewie2009-06-112-32/+41
* wimax/i2400m: Allow bus-specific driver to specify retry countInaky Perez-Gonzalez2009-06-115-2/+20
* wimax/i2400m: if a device reboot happens during probe, handle itInaky Perez-Gonzalez2009-06-113-0/+5
* wimax/i2400m: fix oops when the TX FIFO fills up due to a missing checkInaky Perez-Gonzalez2009-06-111-0/+2
* wimax/i2400m: don't reset device on i2400m_dev_shutdown()Inaky Perez-Gonzalez2009-06-111-5/+5
* wimax/i2400m: fix panic due to missed corner cases on tail_room calculationInaky Perez-Gonzalez2009-06-111-2/+56
* wimax/i2400m: fix panic/warnings caused by missed check on empty TX messageInaky Perez-Gonzalez2009-06-111-1/+9
* wimax/i2400m: rename misleading I2400M_PL_PAD to I2400M_PL_ALIGNInaky Perez-Gonzalez2009-06-113-5/+5
* wimax/i2400m/sdio: Implement I2400M_RT_BUS reset typeDirk Brandewie2009-06-112-3/+19
* wimax/i2400m: Change d_printf() level for secure boot messagesDirk Brandewie2009-06-111-2/+2
* wimax/i2400m: i2400m_schedule_work() doesn't need i2400m->work_queueInaky Perez-Gonzalez2009-06-111-1/+0
* wimax/i2400m: i2400m's work queue should be initialized before RX supportInaky Perez-Gonzalez2009-06-111-7/+14
* wimax/i2400m: don't call netif_start_queue() in _tx_msg_sent()Inaky Perez-Gonzalez2009-06-111-1/+0
* wimax/i2400m: introduce module parameter to disable entering power saveInaky Perez-Gonzalez2009-06-113-2/+18
* wimax/i2400m: usb: fix device reset on autosuspend while not yet idleInaky Perez-Gonzalez2009-05-281-5/+30
OpenPOWER on IntegriCloud