summaryrefslogtreecommitdiffstats
path: root/drivers/net/tulip/uli526x.c
Commit message (Collapse)AuthorAgeFilesLines
* uli526x: convert devices to new APIStephen Hemminger2009-01-071-36/+27
| | | | | | | Convert to net_device_ops and internal net_device_stats Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netdevice: safe convert to netdev_priv() #part-3Wang Chen2008-11-121-1/+1
| | | | | | | | | | | | | | | | | | We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. This patch is a safe convert for netdev->priv to netdev_priv(netdev). Since all of the netdev->priv is only for read. But it is too big to be sent in one mail. I split it to 4 parts and make every part smaller than 100,000 bytes, which is max size allowed by vger. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net: Kill now superfluous ->last_rx stores.David S. Miller2008-11-031-1/+0
| | | | | | | | | | | | | The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Drivers need not do it any more. Some cases had to be skipped over because the drivers were making use of the ->last_rx value themselves. Signed-off-by: David S. Miller <davem@davemloft.net>
* net: convert print_mac to %pMJohannes Berg2008-10-271-3/+2
| | | | | | | | | | | | This converts pretty much everything to print_mac. There were a few things that had conflicts which I have just dropped for now, no harm done. I've built an allyesconfig with this and looked at the files that weren't built very carefully, but it's a huge patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* uli526x: add support for netpollAnton Vorontsov2008-05-221-1/+15
| | | | | | | | | | | | | | | | This patch adds netpoll support for the uli526x ethernet driver -- simply call the interrupt handler for polling. To do this without disable_irq()/enable_irq() pair we should fully protect the handler. Luckily, it's already using irqsave spinlock, the only unprotected place is interrupts re-enabling write. It was safe to re-enable interrupts without holding the spinlock, but with netpoll possibility now it doesn't seem so. Patch was tested using netconsole and KGDBoE. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* uli526x: fix endianness issues in the setup frameAnton Vorontsov2008-05-061-12/+18
| | | | | | | | | | | | This patch fixes uli526x driver's issues on a PowerPC boards: uli chip is unable to receive the packets. It appears that send_frame_filter prepares the setup frame in the endianness unsafe manner. On a big endian machines we should shift the address nibble by two bytes. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* uli526x: initialize the hardware prior to requesting interruptsAnton Vorontsov2008-05-061-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The firmware on MPC8610HPCD boards enables ULI ethernet and leaves it in some funky state before booting Linux. For drivers, it's always good idea to (re)initialize the hardware prior to requesting interrupts. This patch fixes the following oops: Oops: Kernel access of bad area, sig: 11 [#1] MPC86xx HPCD NIP: c0172820 LR: c017287c CTR: 00000000 [...] NIP [c0172820] allocate_rx_buffer+0x2c/0xb0 LR [c017287c] allocate_rx_buffer+0x88/0xb0 Call Trace: [df82bdc0] [c017287c] allocate_rx_buffer+0x88/0xb0 (unreliable) [df82bde0] [c0173000] uli526x_interrupt+0xe4/0x49c [df82be20] [c0045418] request_irq+0xf0/0x114 [df82be50] [c01737b0] uli526x_open+0x48/0x160 [df82be70] [c0201184] dev_open+0xb0/0xe8 [df82be80] [c0200104] dev_change_flags+0x90/0x1bc [df82bea0] [c035fab0] ip_auto_config+0x214/0xef4 [df82bf60] [c03421c8] kernel_init+0xc4/0x2ac [df82bff0] [c0010834] kernel_thread+0x44/0x60 Instruction dump: 4e800020 9421ffe0 7c0802a6 bfa10014 7c7e1b78 90010024 80030060 83e30054 2b80002f 419d0078 3fa0c039 48000058 <907f0010> 80630088 2f830000 419e0014 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* uli526x partially recognizing interfaceGrant Grundler2008-02-231-1/+11
| | | | | | | | | | | | | | | | Patch fixes: http://bugzilla.kernel.org/show_bug.cgi?id=5839 Init sequence needs to poll phy until phy reset is complete. This is the same problem that I fixed in 2002 in tulip driver. Thanks to manty@manty.net for testing this patch. Thanks to Pozsar Balazs <pozsy@uhulinux.hu> for posting/testing a similar patch before: http://lkml.org/lkml/2006/8/21/45 Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* remove asm/bitops.h includesJiri Slaby2007-10-191-1/+1
| | | | | | | | | | | | | remove asm/bitops.h includes including asm/bitops directly may cause compile errors. don't include it and include linux/bitops instead. next patch will deny including asm header directly. Cc: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Fix a potential NULL pointer dereference in uli526x_interrupt() in ↵Micah Gruber2007-10-101-5/+0
| | | | | | | | | | | | | | | drivers/net/tulip/uli526x.c This patch fixes an apparent potential null dereference bug where we dereference dev before a null check. This patch simply remvoes the can't-happen test for a null pointer. Signed-off-by: Micah Gruber <micah.gruber@gmail.com> Cc: Grant Grundler <grundler@parisc-linux.org> Acked-by: Jeff Garzik <jeff@garzik.org> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Clean up redundant PHY write line for ULi526x Ethernet driverRoy Zang2007-10-101-1/+0
| | | | | | | | Clean up redundant PHY write line for ULi526x Ethernet Driver. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* tulip: endianness annotationsAl Viro2007-10-101-3/+3
| | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [NET]: Introduce and use print_mac() and DECLARE_MAC_BUF()Joe Perches2007-10-101-5/+4
| | | | | | | This is nicer than the MAC_FMT stuff. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Nuke SET_MODULE_OWNER macro.Ralf Baechle2007-10-101-1/+0
| | | | | | | | | | | | It's been a useless no-op for long enough in 2.6 so I figured it's time to remove it. The number of people that could object because they're maintaining unified 2.4 and 2.6 drivers is probably rather small. [ Handled drivers added by netdev tree and some missed IRDA cases... -DaveM ] Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* uli526x: Add suspend and resume routines (updated)Rafael J. Wysocki2007-10-101-6/+102
| | | | | | | | | | Add suspend/resume support to the uli526x network driver (tested on x86_64, with 'Ethernet controller: ALi Corporation M5263 Ethernet Controller, rev 40'). This patch is based on the suspend/resume code in the tg3 driver. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [SK_BUFF]: Introduce skb_copy_from_linear_data{_offset}Arnaldo Carvalho de Melo2007-04-251-1/+1
| | | | | | | To clearly state the intent of copying from linear sk_buffs, _offset being a overly long variant but interesting for the sake of saving some bytes. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* [SK_BUFF]: Convert skb->tail to sk_buff_data_tArnaldo Carvalho de Melo2007-04-251-3/+11
| | | | | | | | | | | | | | | So that it is also an offset from skb->head, reduces its size from 8 to 4 bytes on 64bit architectures, allowing us to combine the 4 bytes hole left by the layer headers conversion, reducing struct sk_buff size to 256 bytes, i.e. 4 64byte cachelines, and since the sk_buff slab cache is SLAB_HWCACHE_ALIGN... :-) Many calculations that previously required that skb->{transport,network, mac}_header be first converted to a pointer now can be done directly, being meaningful as offsets or pointers. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [ETH]: Make eth_type_trans set skb->dev like the other *_type_transArnaldo Carvalho de Melo2007-04-251-4/+2
| | | | | | | One less thing for drivers writers to worry about. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells2006-10-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
* drivers/net: const-ify ethtool_ops declarationsJeff Garzik2006-09-131-2/+2
| | | | Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] initialisation cleanup for ULI526x-net-driverHenrik Kretzschmar2006-07-291-8/+4
| | | | | | | | | removes the unneeded local variable rc replace pci_module_init() with pci_register_driver() two coding style issues on switch Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] irq-flags: drivers/net: Use the new IRQF_ constantsThomas Gleixner2006-07-021-1/+1
| | | | | | | | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [netdrvr] trim trailing whitespace: 8139*.c, epic100, forcedeth, tulip/*Jeff Garzik2006-05-261-40/+40
|
* [PATCH] uli526x warning fixAndrew Morton2006-02-071-1/+1
| | | | | | | | drivers/net/tulip/uli526x.c: In function `__check_mode': drivers/net/tulip/uli526x.c:1693: warning: return from incompatible pointer type Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] replace MODULE_PARM in tulip/uli526x.cEric Sesterhenn / snakebyte2006-01-121-3/+3
| | | | | | | Replace the MODULE_PARM usage in uli526x.c with module_param. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] (4/7) missing include (uli526x)viro@ftp.linux.org.uk2005-09-051-1/+1
| | | | | | | | added missing include of dma-mapping.h, removed bogus ptrace.h (what the hell was it doing there, in the first place?) Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [netdrvr uli526x] fix problems found in reviewPeer Chen2005-08-201-114/+93
| | | | | | | - s/DEVICE/net_device/ - improve formatting - remove dead code - check return value, in several areas
* [netdrvr] add 'uli526x' driver (a tulip clone)Peer Chen2005-07-291-0/+1770
We want to extract our LAN card driver from tulip core driver and make a new file uli526x.c at tulip folder, because we have added some ethtool interface support and non-eprom support in our driver and may be other change in the futher. If our controllers support are still contained in the tulip core driver, I think it'll increase the complexity of maintenance, you know, tulip core driver include several files and support so many other controllers. Furthermore, I tested the newest kernel 2.6.12 and I found the tulip driver can not work on our lan controller, and I no time to debug it, so I aspired want to make a single uli526x.c file just for our controllers. Could you help us remove the ULi m5261/m5263 lan controller support from tulip core driver and add the new single uli526x.c file for us? Signed-off-by: Peer Chen <Peer.Chen@uli.com.tw> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
OpenPOWER on IntegriCloud