summaryrefslogtreecommitdiffstats
path: root/drivers/net/s2io.h
Commit message (Collapse)AuthorAgeFilesLines
...
* s2io: add PCI error recovery supportLinas Vepstas2007-07-081-1/+0
| | | | | | | s2io cleanup suggestions, per discussion on mailing lists. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* s2io: add PCI error recovery supportLinas Vepstas2007-07-081-0/+5
| | | | | | | | | | | | | | This patch adds PCI error recovery support to the s2io 10-Gigabit ethernet device driver. Third revision, blocks interrupts and the watchdog. Tested, seems to work well. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Acked-by: Ramkrishna Vepa <Ramkrishna.Vepa@neterion.com> Cc: Raghavendra Koushik <raghavendra.koushik@neterion.com> Cc: Wen Xiong <wenxiong@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* S2IO: Statistics for link up/down and memory allocated/freedSreenivasa Honnur2007-05-111-0/+24
| | | | | | | | | 1. Added statistics for link up/down, last link up/down. 2. Statistics for memory allocated/freed. 3. Changed level of some DBG_PRINTs. Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* S2IO: statistics for memory allocation failuersSreenivasa Honnur2007-05-111-0/+3
| | | | | | | | | 1. Added code to count the number of memory failures. 2. Added watchdog_timer counter. 3. Changed debug level for some DBG_PRINTS. Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* S2IO: getringparam ethtool optionSreenivasa Honnur2007-05-111-0/+5
| | | | | | | Adding get_ringparam ethtool option. Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* S2io: Remove unused variablesRamkrishna Vepa2007-04-281-7/+1
| | | | | | | | | | | | | - Remove unused variables from s2io_nic structure - Changed the memory failure printk messages to print only in debug mode - Updated the copyright messages (Resending; due to patch being corrupted) Signed-off-by: Santosh Rastapur <santosh.rastapur@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* S2IO: Added a loadable parameter to enable or disable vlan stripping in frame.Sivakumar Subramani2007-02-271-0/+3
| | | | | | | | | | - Added code to not to strip vlan tag when driver is in promiscuous mode - Added module loadable parameter 'vlan_tag_strip" through which user can enable or disable vlan stripping irrespective of mode ( promiscuous or non-promiscuous ). Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* S2IO: Optimized the delay to wait for command completionSivakumar Subramani2007-02-271-2/+5
| | | | | | | | | | | - Optimized delay to wait for command completion so as to reduce the initialization wait time. - Disable differentiated services steering. By default RMAC is configured to steer traffic with certain DS codes to other queues. Driver must initialize the DS memory to 0 to make sure that DS steering will not be used by default. Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] trivial s2io annotationsAl Viro2007-02-091-3/+3
| | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* s2io: De-typedef driver.Ralf Baechle2007-02-051-98/+104
| | | | | | | Removed namespace collisions due to usage of nic_t as per Ralf's patch Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* S2IO: Fixes for reset and link handling.Sivakumar Subramani2007-02-051-6/+15
| | | | | | | | | | 1. Fix for reset and link handling. 2. Allow for promiscuos mode and multicast state be maintained through ifconfig up and down. 3. Support to print adapter serial number. Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* s2io: Making LRO and UFO as module loadable parameter.Sivakumar Subramani2007-02-051-8/+0
| | | | | | | | | | This patch adds two load parameters napi and ufo. Previously NAPI was compilation option with these changes wan enable disable NAPI using load parameter. Also we are introducing ufo load parameter to enable/disable ufo feature Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* WorkStruct: make allyesconfigDavid Howells2006-11-221-1/+1
| | | | | | Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
* [PATCH] endianness annotations in s2ioAl Viro2006-10-101-161/+161
| | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells2006-10-051-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
* drivers/net: const-ify ethtool_ops declarationsJeff Garzik2006-09-131-1/+1
| | | | Signed-off-by: Jeff Garzik <jeff@garzik.org>
* drivers/net: Trim trailing whitespaceJeff Garzik2006-09-131-4/+4
| | | | Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] s2io driver bug fixes #2Ananda Raju2006-08-031-0/+5
| | | | | | | | | | | | | | | | | | | This patch contains some of the bug fixes and enhancements done to s2io driver. Following are the brief description of changes 1. code cleanup to handle gso modification better 2. Move repeated code in rx path, to a common function s2io_chk_rx_buffers() 3. Bug fix in MSI interrupt 4. clear statistics when card is down 5. Avoid linked list traversing in lro aggregation. 6. Use pci_dma_sync_single_for_cpu for buffer0 in case of 2/3 buffer mode. 7. ethtool tso get/set functions to set clear NETIF_F_TSO6 8. Stop LRO aggregation when we receive ECN notification Signed-off-by: Ananda Raju <ananda.raju@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] s2io driver bug fixes #1Ananda Raju2006-08-031-0/+5
| | | | | | | | | | | | | | | This patch contains some of the bug fixes and enhancements done to s2io driver. Following are the brief description of changes 1. Introduced macro "S2IO_PARM_INT" for declaring integer load parameter 2. UDP_RR test failure, memset txdl after Tx completion 3. PXE boot may leave adapter in unknown state so do reset in probe. 4. Add Tx completion code in netpoll 5. In s2io_vpd_read() move array vpd_data[] to pointer, saves stack memory 6. Fix bug in ethtool online test Signed-off-by: Ananda Raju <ananda.raju@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] s2io driver irq fixAnanda Raju2006-07-121-3/+2
| | | | | | | | | | | | | Modification and bug fixes with respect to irq registration. - Enable interrupts after request_irq - Restored MSI data register value at driver unload time Signed-off-by: Ananda Raju <ananda.raju@neterion.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* typo fixes: infomation -> informationAdrian Bunk2006-06-301-1/+1
| | | | Signed-off-by: Adrian Bunk <bunk@stusta.de>
* [PATCH] s2io: additional statsAnanda Raju2006-05-021-0/+28
| | | | | | | | | Hi, This patch contains additional statistics counters added to s2io driver these statistics are very much usefull in debugging the driver. Signed-off-by: Ananda Raju <ananda.raju@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] s2io: fixesAnanda Raju2006-05-021-12/+18
| | | | | | | | | | | | | | | | | | | | Hi, This patch contains some of the bug fixes done for S2io driver. Following are the brief description of changes 1. Continuing with initialization if we get minimum required MSI-X vectors 2. fix for ethtool online link test fails 3. make wait_for_cmd_complete generic for all command status registers 4. Print "Device is on PCI-E bus" for Xframe-E card 5. CX4 requires additional delay after sw_reset, and requires higher value for igp 6. Fixed panic due to non-TCP and/or LLC/SNAP traffic in case of lro 7. remove legacy code for old transponder 8. SPECIAL_REG_WRITE made to use 32-bit writes irrespective of system type 9. handle link interrupt as per user guide for Xframe II 10. Wait till all interrupts hndled Signed-off-by: Ananda Raju <ananda.raju@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] s2io: input parms, output messages updateAnanda Raju2006-05-021-3/+6
| | | | | | | | | | | | | | | hi, This patch contains the modification and bug fixes with respect to input parameters and outupt dmesages. following is brief description of the changes. 1. Set default values for rx_ring_sz[0..7] and tx_fifo_len[0..7] 2. verify few basic load parameters 3. read product description from VPD 4. clean up of dmesg when driver is loaded Signed-off-by: Ananda Raju <ananda.raju@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Merge branch 'lro'Jeff Garzik2006-03-021-0/+38
|\
| * [PATCH] S2io: Large Receive Offload (LRO) feature(v2) for Neterion (s2io) ↵Ravinandan Arakali2006-01-271-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 10GbE Xframe PCI-X and PCI-E NICs Hi, Below is a patch for the Large Receive Offload feature. Please review and let us know your comments. LRO algorithm was described in an OLS 2005 presentation, located at ftp.s2io.com user: linuxdocs password: HALdocs The same ftp site has Programming Manual for Xframe-I ASIC. LRO feature is supported on Neterion Xframe-I, Xframe-II and Xframe-Express 10GbE NICs. Brief description: The Large Receive Offload(LRO) feature is a stateless offload that is complementary to TSO feature but on the receive path. The idea is to combine and collapse(upto 64K maximum) in the driver, in-sequence TCP packets belonging to the same session. It is mainly designed to improve 1500 mtu receive performance, since Jumbo frame performance is already close to 10GbE line rate. Some performance numbers are attached below. Implementation details: 1. Handle packet chains from multiple sessions(current default MAX_LRO_SESSSIONS=32). 2. Examine each packet for eligiblity to aggregate. A packet is considered eligible if it meets all the below criteria. a. It is a TCP/IP packet and L2 type is not LLC or SNAP. b. The packet has no checksum errors(L3 and L4). c. There are no IP options. The only TCP option supported is timestamps. d. Search and locate the LRO object corresponding to this socket and ensure packet is in TCP sequence. e. It's not a special packet(SYN, FIN, RST, URG, PSH etc. flags are not set). f. TCP payload is non-zero(It's not a pure ACK). g. It's not an IP-fragmented packet. 3. If a packet is found eligible, the LRO object is updated with information such as next sequence number expected, current length of aggregated packet and so on. If not eligible or max packets reached, update IP and TCP headers of first packet in the chain and pass it up to stack. 4. The frag_list in skb structure is used to chain packets into one large packet. Kernel changes required: None Performance results: Main focus of the initial testing was on 1500 mtu receiver, since this is a bottleneck not covered by the existing stateless offloads. There are couple disclaimers about the performance results below: 1. Your mileage will vary!!!! We initially concentrated on couple pci-x 2.0 platforms that are powerful enough to push 10 GbE NIC and do not have bottlenecks other than cpu%; testing on other platforms is still in progress. On some lower end systems we are seeing lower gains. 2. Current LRO implementation is still (for the most part) software based, and therefore performance potential of the feature is far from being realized. Full hw implementation of LRO is expected in the next version of Xframe ASIC. Performance delta(with MTU=1500) going from LRO disabled to enabled: IBM 2-way Xeon (x366) : 3.5 to 7.1 Gbps 2-way Opteron : 4.5 to 6.1 Gbps Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* | [PATCH] drivers/net/s2io.c: make code staticAdrian Bunk2006-01-171-10/+7
|/ | | | | | | This patch makes some needlessly global code static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] s2io: UFO supportAnanda Raju2005-11-181-0/+3
| | | | | | | | This patch implements the UFO support in S2io driver. This patch uses the UFO interface available in linux-2.6.15 kernel. Signed-off-by: Ananda Raju <ananda.raju@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] S2io: Multi buffer mode supportAnanda Raju2005-11-051-44/+47
| | | | | | | | | | | | | | | | | | | | | | | Hi, This patch provides dynamic two buffer-mode and 3 buffer-mode options. Previously 2 buffer-mode was compilation option. Now with this patch applied one can load driver in 2 buffer-mode with module-load parameter ie. #insmod s2io.ko rx_ring_mode=2 This patch also provides 3 buffer-mode which provides header separation functionality. In 3 buffer-mode skb->data will have L2/L3/L4 headers and "skb_shinfo(skb)->frag_list->data" will have have L4 payload. one can load driver in 3 buffer-mode with same above module-load parameter ie. #insmod s2io.ko rx_ring_mode=3 Please review the patch. Signed-off-by: Ananda Raju <ananda.raju@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] S2io: MSI/MSI-X support (runtime configurable)Ravinandan Arakali2005-10-041-5/+45
| | | | | | | | | | | | | This patch adds support for MSI/MSI-X feature to the driver. It is a runtime parameter(for now, loadable parameter). Default is INTA. Patch has been tested on IA64 platform with Xframe II adapter, both of which support MSI-X feature. An improvement of about 7% in throughput(both Tx and Rx) was observed and a reduction by 7% in CPU utilization during Tx test. Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] S2io: Hardware and miscellaneous fixesravinandan.arakali@neterion.com2005-09-061-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | Hi, This patch contains the following hardware related fixes and other miscellaneous bug fixes. 1. Updated the definition of single and double-bit ECC errors 2. Earlier we were allocating Transmit descriptors equal to MAX_SKB_FRAGS. This was causing a boundary condition failure. Need to allocate MAX_SKB_FRAGS+1 descriptors. 3. On some platforms(like PPC), pci_alloc_consistent() can return a zero DMA address. Since the NIC cannot handle zero-addresses, a workaround has been provided. Basically, we don't use such that page. We reallocate. 4. If list_info allocation failed during driver load, check for it during driver exit and return instead of trying to dereference NULL pointer. 5. Increase the debug level of few non-critical debug messages. 6. Reset the card on critical ECC double errors only in case of XframeI since XframeII can recover from such errors. 7. Print copyright message on driver load. 8. Bumped up the driver version no. to 2.0.8.1 Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] s2io build fixAndrew Morton2005-08-301-2/+2
| | | | | | | | | | | | | Damir Perisa <damir.perisa@solnet.ch> reports: drivers/net/s2io.h:765: error: invalid lvalue in assignment drivers/net/s2io.h:766: error: invalid lvalue in assignment That's a gcc4 error. I don't see why the casts are there anyway.. Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] S2io: Errors found during reviewraghavendra.koushik@neterion.com2005-08-111-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hi, This is a patch to incorporate comments from earlier 12 patches. It also fixes a few issues we found during this time. Following is a list of changes in this patch. Item 1 incorporates earlier comments. Issues addressed in items 2 to 4 were discovered recently. 1. wmb() call in s2io_xmit() replaced with mmiowb(). 2. The dtx_control register was earlier programmed incorrectly for Xframe II adapter. 3. As suggested by hardware team, after a reset, in case of Xframe II adapter, we clear certain spurious errors by clearing PCI-X ECC status register, "detected parity error" bit in PCI_STATUS register and PCI_STATUS bit in txpic_int register. 4. On IBM PPC platforms, we found that in the Rx buffer replenish function, two memory writes(one to the the descriptor length and another to the ownership) were getting reordered. This was causing the adapter to see the ownership transfered to it before the length was updated. One solution was to add a wmb() but since this would turnout expensive on some platforms if called for every descriptor, we set the ownership bit and other fields of '2' to 'N' Rx descriptors followed by a wmb() and then set the ownership of first descriptor ('1'). Here the value 'N' is configurable by making it a module loadable parameter (rxsync_frequency). (NOTE: This parameter is a power of 2). 5. Bumped up the driver version no. to 2.0.2.1 Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com> Signed-off-by: Raghavendra Koushik <raghavendra.koushik@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] S2io: Support for bimodal interruptsraghavendra.koushik@neterion.com2005-08-111-2/+1
| | | | | | | | | | | | Hi, This is a patch to provide bimodal interrupt moderation support for Xframe II adapter. Basically, in this moderation scheme, the adapter raises a traffic interrupt if the no. of packets transmitted and/or received reaches a programmable threshold. Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com> Signed-off-by: Raghavendra Koushik <raghavendra.koushik@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] S2io: Support for Xframe II NICraghavendra.koushik@neterion.com2005-08-111-0/+64
| | | | | | | | | | | | | | | | | | | Hi, This patch provides basic support for the Xframe II adapter. Includes the following changes: 1. New values to program XAUI interface. 2. Print the PCI/PCI-X mode(bus frequency, width). 3. Remove EOI from reset during intialization. 4. Enable all 8 PCCs if Xframe II adapter. 5. Programs the RLDRAM size depending on the device. (Note: RLDRAM size on XFARME-I is 64Mb whereas on XFRAME-II it's 32 Mb). 6. Enable extended(64-bit) statistics counters. 7. Program timer interrupt duration based on PCI/PCI-X clock speed. 8. Not required to save/restore PCI config space before/after reset. Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com> Signed-off-by: Raghavendra Koushik <raghavendra.koushik@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] S2io: VLAN supportraghavendra.koushik@neterion.com2005-08-111-0/+2
| | | | | | | | | Hi, Patch below adds VLAN support to the driver. Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com> Signed-off-by: Raghavendra Koushik <raghavendra.koushik@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] S2io: Timer based slowpath handlingraghavendra.koushik@neterion.com2005-08-111-0/+4
| | | | | | | | | | | Hi, This patch implements the slow-path handling functions(link state change, hardware errors) as a timer. It is not handled in interrupt handler as was done previously. Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com> Signed-off-by: Raghavendra Koushik <raghavendra.koushik@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] S2io: Performance improvementsraghavendra.koushik@neterion.com2005-08-111-0/+5
| | | | | | | | | | | | | | | | Hi, This patch relates to mostly performance related changes. 1. Fixed incorrect computation of PANIC level in rx_buffer_level(). 2. Removed unnecessary PIOs(read/write of tx_traffic_int and rx_traffic_int) from interrupt handler and removed read of general_int_status register from xmit routine. 3. Enable two-buffer mode(for Rx path) automatically for SGI systems. This improves Rx performance dramatically on SGI systems. Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com> Signed-off-by: Raghavendra Koushik <raghavendra.koushik@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] S2io: Software fixesraghavendra.koushik@neterion.com2005-08-111-0/+5
| | | | | | | | | | | | | | | | | | | Hi, Below patch includes fixes for few purely software bugs identified since last release. 1. Keep track and display(as part of ethtool command output) the no. of single-bit and double-bit ECC errors. 2. Handle race condition between intr handler and "interface down" routine. 3. Initial link state setting modified so that the link state displayed after "interface Up" is correct. 4. Fix for "Incorrect Tx packet count when TSO is enabled". 5. Disable periodic DMA of statistics and schedule one-shot DMA only when required. Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com> Signed-off-by: Raghavendra Koushik <raghavendra.koushik@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] S2io: Hardware fixesraghavendra.koushik@neterion.com2005-08-111-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | Hi, Below patch addresses few h/w specific issues. 1. Check for additional ownership bit on Rx path before starting Rx processing. 2. Enable only 4 PCCs(Per Context Controller) for Xframe I revisions less than 4. 3. Program Rx and Tx round robin registers depending on no. of rings/FIFOs. 4. Tx continous interrupts is now a loadable parameter. 5. Reset the card if we get double-bit ECC errors. 6. A soft reset of XGXS being done to force a link state change has been eliminated. 7. After a reset, clear "parity error detected" bit, PCI-X ECC status register, and PCI_STATUS bit in tx_pic_int register. 8. The error in the disabling allmulticast implementation has been rectified. 9. Leave the PCI-X parameters MMRBC, OST etc. at their BIOS/system defaults. Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com> Signed-off-by: Raghavendra Koushik <raghavendra.koushik@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] S2io: Code cleanupraghavendra.koushik@neterion.com2005-08-111-115/+171
| | | | | | | | | | | | | | | | | | | | | | | Hi, We are submitting a series of 13 patches to support our Xframe I and Xframe II line of products. The patches can be categorized as follows: Patches 1-8 : Changes applicable to both Xframe I and II Patches 9-11: Xframe II specific features Patch 12: Addresses issues found during testing cycle. Patch 13: Incorpoates mostly the review comments from community and some last moment bug fixes. Please review the patches and let us know your comments. Starting with patch 1 below. This patch involves cosmetic changes(tabs and indentation, regrouping of transmit and receive data structures, typecasting, code cleanup). Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com> Signed-off-by: Raghavendra Koushik <raghavendra.koushik@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-161-0/+760
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
OpenPOWER on IntegriCloud