summaryrefslogtreecommitdiffstats
path: root/drivers/net/phy/phy_device.c
Commit message (Collapse)AuthorAgeFilesLines
* net: phy: Do not perform software reset for Generic PHYFlorian Fainelli2017-03-051-1/+1
| | | | | | | | | | | | | | | | | The Generic PHY driver is a catch-all PHY driver and it should preserve whatever prior initialization has been done by boot loader or firmware agents. For specific PHY device configuration it is expected that a specialized PHY driver would take over that role. Resetting the generic PHY was a bad idea that has lead to several complaints and downstream workarounds e.g: in OpenWrt/LEDE so restore the behavior prior to 87aa9f9c61ad ("net: phy: consolidate PHY reset in phy_init_hw()"). Reported-by: Felix Fietkau <nbd@nbd.name> Fixes: 87aa9f9c61ad ("net: phy: consolidate PHY reset in phy_init_hw()") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: Check phydev->drvFlorian Fainelli2017-02-201-3/+3
| | | | | | | | | | | | | | There are number of function calls, originating from user-space, typically through the Ethernet driver that can make us crash by dereferencing phydev->drv which will be NULL once we unbind the driver from the PHY. There are still functional issues that prevent an unbind then rebind to work, but these will be addressed separately. Suggested-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: Fix PHY unbind crashFlorian Fainelli2017-02-201-0/+2
| | | | | | | | | | | The PHY library does not deal very well with bind and unbind events. The first thing we would see is that we were not properly canceling the PHY state machine workqueue, so we would be crashing while dereferencing phydev->drv since there is no driver attached anymore. Suggested-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: Fix PHY module checks and NULL deref in phy_attach_direct()Florian Fainelli2017-02-091-8/+20
| | | | | | | | | | | | | | | | | | | | | | | | | The Generic PHY drivers gets assigned after we checked that the current PHY driver is NULL, so we need to check a few things before we can safely dereference d->driver. This would be causing a NULL deference to occur when a system binds to the Generic PHY driver. Update phy_attach_direct() to do the following: - grab the driver module reference after we have assigned the Generic PHY drivers accordingly, and remember we came from the generic PHY path - update the error path to clean up the module reference in case the Generic PHY probe function fails - split the error path involving phy_detacht() to avoid double free/put since phy_detach() does all the clean up - finally, have phy_detach() drop the module reference count before we call device_release_driver() for the Generic PHY driver case Fixes: cafe8df8b9bc ("net: phy: Fix lack of reference count on PHY driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: Fix lack of reference count on PHY driverMao Wenan2017-02-021-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is currently no reference count being held on the PHY driver, which makes it possible to remove the PHY driver module while the PHY state machine is running and polling the PHY. This could cause crashes similar to this one to show up: [ 43.361162] BUG: unable to handle kernel NULL pointer dereference at 0000000000000140 [ 43.361162] IP: phy_state_machine+0x32/0x490 [ 43.361162] PGD 59dc067 [ 43.361162] PUD 0 [ 43.361162] [ 43.361162] Oops: 0000 [#1] SMP [ 43.361162] Modules linked in: dsa_loop [last unloaded: broadcom] [ 43.361162] CPU: 0 PID: 1299 Comm: kworker/0:3 Not tainted 4.10.0-rc5+ #415 [ 43.361162] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014 [ 43.361162] Workqueue: events_power_efficient phy_state_machine [ 43.361162] task: ffff880006782b80 task.stack: ffffc90000184000 [ 43.361162] RIP: 0010:phy_state_machine+0x32/0x490 [ 43.361162] RSP: 0018:ffffc90000187e18 EFLAGS: 00000246 [ 43.361162] RAX: 0000000000000000 RBX: ffff8800059e53c0 RCX: ffff880006a15c60 [ 43.361162] RDX: ffff880006782b80 RSI: 0000000000000000 RDI: ffff8800059e5428 [ 43.361162] RBP: ffffc90000187e48 R08: ffff880006a15c40 R09: 0000000000000000 [ 43.361162] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800059e5428 [ 43.361162] R13: ffff8800059e5000 R14: 0000000000000000 R15: ffff880006a15c40 [ 43.361162] FS: 0000000000000000(0000) GS:ffff880006a00000(0000) knlGS:0000000000000000 [ 43.361162] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 43.361162] CR2: 0000000000000140 CR3: 0000000005979000 CR4: 00000000000006f0 [ 43.361162] Call Trace: [ 43.361162] process_one_work+0x1b4/0x3e0 [ 43.361162] worker_thread+0x43/0x4d0 [ 43.361162] ? __schedule+0x17f/0x4e0 [ 43.361162] kthread+0xf7/0x130 [ 43.361162] ? process_one_work+0x3e0/0x3e0 [ 43.361162] ? kthread_create_on_node+0x40/0x40 [ 43.361162] ret_from_fork+0x29/0x40 [ 43.361162] Code: 56 41 55 41 54 4c 8d 67 68 53 4c 8d af 40 fc ff ff 48 89 fb 4c 89 e7 48 83 ec 08 e8 c9 9d 27 00 48 8b 83 60 ff ff ff 44 8b 73 98 <48> 8b 90 40 01 00 00 44 89 f0 48 85 d2 74 08 4c 89 ef ff d2 8b Keep references on the PHY driver module right before we are going to utilize it in phy_attach_direct(), and conversely when we don't use it anymore in phy_detach(). Signed-off-by: Mao Wenan <maowenan@huawei.com> [florian: rebase, rework commit message] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: use boolean dt properties for eee broken modesjbrunet2016-12-201-3/+15
| | | | | | | | | | | | | | | | | The patches regarding eee-broken-modes was merged before all people involved could find an agreement on the best way to move forward. While we agreed on having a DT property to mark particular modes as broken, the value used for eee-broken-modes mapped the phy register in very direct way. Because of this, the concern is that it could be used to implement configuration policies instead of describing a broken HW. In the end, having a boolean property for each mode seems to be preferred over one bit field value mapping the register (too) directly. Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: fix sign type error in genphy_config_eee_advertjbrunet2016-12-201-2/+2
| | | | | | | | | | | | In genphy_config_eee_advert, the return value of phy_read_mmd_indirect is checked to know if the register could be accessed but the result is assigned to a 'u32'. Changing to 'int' to correctly get errors from phy_read_mmd_indirect. Fixes: d853d145ea3e ("net: phy: add an option to disable EEE advertisement") Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: phy drivers should not set SUPPORTED_[Asym_]PauseTimur Tabi2016-12-101-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of having individual PHY drivers set the SUPPORTED_Pause and SUPPORTED_Asym_Pause flags, phylib itself should set those flags, unless there is a hardware erratum or other special case. During autonegotiation, the PHYs will determine whether to enable pause frame support. Pause frames are a feature that is supported by the MAC. It is the MAC that generates the frames and that processes them. The PHY can only be configured to allow them to pass through. This commit also effectively reverts the recently applied c7a61319 ("net: phy: dp83848: Support ethernet pause frames"). So the new process is: 1) Unless the PHY driver overrides it, phylib sets the SUPPORTED_Pause and SUPPORTED_AsymPause bits in phydev->supported. This indicates that the PHY supports pause frames. 2) The MAC driver checks phydev->supported before it calls phy_start(). If (SUPPORTED_Pause | SUPPORTED_AsymPause) is set, then the MAC driver sets those bits in phydev->advertising, if it wants to enable pause frame support. 3) When the link state changes, the MAC driver checks phydev->pause and phydev->asym_pause, If the bits are set, then it enables the corresponding features in the MAC. The algorithm is: if (phydev->pause) The MAC should be programmed to receive and honor pause frames it receives, i.e. enable receive flow control. if (phydev->pause != phydev->asym_pause) The MAC should be programmed to transmit pause frames when needed, i.e. enable transmit flow control. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2016-12-101-3/+13
|\
| * phy: Don't increment MDIO bus refcount unless it's a different ownerFlorian Fainelli2016-12-071-3/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 3e3aaf649416 ("phy: fix mdiobus module safety") fixed the way we dealt with MDIO bus module reference count, but sort of introduced a regression in that, if an Ethernet driver registers its own MDIO bus driver, as is common, we will end up with the Ethernet driver's module->refnct set to 1, thus preventing this driver from any removal. Fix this by comparing the network device's device driver owner against the MDIO bus driver owner, and only if they are different, increment the MDIO bus module refcount. Fixes: 3e3aaf649416 ("phy: fix mdiobus module safety") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | phy: add phy fixup unregister functionsWoojung.Huh@microchip.com2016-12-081-0/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | >From : Woojung Huh <woojung.huh@microchip.com> Add functions to unregister phy fixup for modules. int phy_unregister_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask) Unregister phy fixup from phy_fixup_list per bus_id, phy_uid & phy_uid_mask int phy_unregister_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask) Unregister phy fixup from phy_fixup_list. Use it for fixup registered by phy_register_fixup_for_uid() int phy_unregister_fixup_for_id(const char *bus_id) Unregister phy fixup from phy_fixup_list. Use it for fixup registered by phy_register_fixup_for_id() Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: Fix use after free in phy_detach()Geert Uytterhoeven2016-11-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If device_release_driver(&phydev->mdio.dev) is called, it releases all resources belonging to the PHY device. Hence the subsequent call to phy_led_triggers_unregister() will access already freed memory when unregistering the LEDs. Move the call to phy_led_triggers_unregister() before the possible call to device_release_driver() to fix this. Fixes: 2e0bc452f4721520 ("net: phy: leds: add support for led triggers on phy link state change") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Zach Brown <zach.brown@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: add an option to disable EEE advertisementjbrunet2016-11-291-9/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds an option to disable EEE advertisement in the generic PHY by providing a mask of prohibited modes corresponding to the value found in the MDIO_AN_EEE_ADV register. On some platforms, PHY Low power idle seems to be causing issues, even breaking the link some cases. The patch provides a convenient way for these platforms to disable EEE advertisement and work around the issue. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Tested-by: Yegor Yefremov <yegorslists@googlemail.com> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | phy: fix error case of phy_led_triggers_(un)registerWoojung Huh2016-11-251-3/+3
| | | | | | | | | | | | | | | | | | | | | | When phy_init_hw() fails at phy_attach_direct(); - phy_detach() calls phy_led_triggers_unregister() without previous call of phy_led_triggers_register(). - still call phy_led_triggers_register() and cause memory leak. Fixes: 2e0bc452f472 ("net: phy: leds: add support for led triggers on phy link state change") Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2016-11-151-0/+2
|\ \ | |/ | | | | | | | | | | Several cases of bug fixes in 'net' overlapping other changes in 'net-next-. Signed-off-by: David S. Miller <davem@davemloft.net>
| * phy: fix device reference leaksJohan Hovold2016-11-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Make sure to drop the reference taken by bus_find_device_by_name() before returning from phy_connect() and phy_attach(). Note that both function still take a reference to the phy device through phy_attach_direct(). Fixes: e13934563db0 ("[PATCH] PHY Layer fixup") Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: leds: add support for led triggers on phy link state changeZach Brown2016-10-181-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Create an option CONFIG_LED_TRIGGER_PHY (default n), which will create a set of led triggers for each instantiated PHY device. There is one LED trigger per link-speed, per-phy. The triggers are registered during phy_attach and unregistered during phy_detach. This allows for a user to configure their system to allow a set of LEDs not controlled by the phy to represent link state changes on the phy. LEDS controlled by the phy are unaffected. For example, we have a board where some of the leds in the RJ45 socket are controlled by the phy, but others are not. Using the triggers provided by this patch the leds not controlled by the phy can be configured to show the current speed of the ethernet connection. The leds controlled by the phy are unaffected. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by: Zach Brown <zach.brown@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: Threaded interrupts allow some simplificationAndrew Lunn2016-10-171-1/+1
|/ | | | | | | | | | | The PHY interrupts are now handled in a threaded interrupt handler, which can sleep. The work queue is no longer needed, phy_change() can be called directly. phy_mac_interrupt() still needs to be safe to call in interrupt context, so keep the work queue, and use a helper to call phy_change(). Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* Revert "phy: add support for a reset-gpio specification"Fabio Estevam2016-05-201-8/+0
| | | | | | | | | | | | | | | | | | | | Commit da47b4572056 ("phy: add support for a reset-gpio specification") causes the following xtensa qemu crash according to Guenter Roeck: [ 9.366256] libphy: ethoc-mdio: probed [ 9.367389] (null): could not attach to PHY [ 9.368555] (null): failed to probe MDIO bus [ 9.371540] Unable to handle kernel paging request at virtual address 0000001c [ 9.371540] pc = d0320926, ra = 903209d1 [ 9.375358] Oops: sig: 11 [#1] This reverts commit da47b4572056487fd7941c26f73b3e8815ff712a. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: add support for a reset-gpio specificationUwe Kleine-König2016-05-161-0/+8
| | | | | | | | The framework only asserts (for now) that the reset gpio is not active. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Roger Quadros <rogerq@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* phylib: don't return NULL from get_phy_device()Sergei Shtylyov2016-04-261-1/+1
| | | | | | | | | | | Arnd Bergmann asked that get_phy_device() returns either NULL or the error value, not both on error. Do as he said, return ERR_PTR(-ENODEV) instead of NULL when the PHY ID registers read as all ones. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: make some bits preserved while setup forced modewangweidong2016-04-151-1/+2
| | | | | | | | | | | | | | | When tested the PHY SGMII Loopback: 1.set the LOOPBACK bit, 2.set the autoneg to AUTONEG_DISABLE, it calls the genphy_setup_forced which will clear the bit. The BMCR_LOOPBACK bit should be preserved. As Florian pointed out that other bits should be preserved too. So I make the BMCR_ISOLATE and BMCR_PDOWN as well. Signed-off-by: Weidong Wang <wangweidong1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: keep pause flags in phy driver featuresWoojung.Huh@microchip.com2016-02-171-1/+1
| | | | | | | | | genphy_config_init() masked out pause flags set in phy driver structure. Pause flags needs to be preserved in phydev->supported & phydev->advertising. Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: turn carrier off on phy attachSjoerd Simons2016-01-151-0/+5
| | | | | | | | | | | | | | The operstate of a networking device initially IF_OPER_UNKNOWN aka "unknown", updated on carrier state changes (with carrier state being on by default). This means it will stay unknown unless the carrier state goes to off at some point, which is not the case if the phy is already up/connected at startup. Explicitly turn off the carrier on phy attach, leaving the phy state machine to turn the carrier on when it has done the initial negotiation. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: remove an unneeded conditionDan Carpenter2016-01-121-1/+1
| | | | | | | | | | It used to be that bus->irq was a pointer but after e7f4dc3536a4 ('mdio: Move allocation of interrupts into core') it's an array inside the mdio struct, so it can never be NULL. Let's remove the check. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mdio: Abstract device_remove() and device_free()Andrew Lunn2016-01-071-0/+18
| | | | | | | | | | Make device_free and device_remove operations in the mdio device structure, so the core code does not need to differentiate between phy devices and generic mdio devices. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mdio: Add support for mdio drivers.Andrew Lunn2016-01-071-10/+17
| | | | | | | | | Not all devices on an MDIO bus are PHYs. Meaning not all MDIO drivers are PHY drivers. Add support for generic MDIO drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: Move phy specific bus match into phy_deviceAndrew Lunn2016-01-071-0/+28
| | | | | | | | | | Matching a driver to a device has both generic parts, and parts which are specific to PHY devices. Move the PHY specific parts into phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: Centralize setting driver module ownerAndrew Lunn2016-01-071-6/+7
| | | | | | | | | | Rather than have each driver set the driver owner field, do it once in the core code. This will also help with later changes, when the device structure will move. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: Move PHY PM operations into phy_deviceAndrew Lunn2016-01-071-0/+110
| | | | | | | | | | The MDIO PM operations are really PHY device PM operations. So move them into phy_device. This will be needed when we support devices on the mdio bus which are not PHYs. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy_device: Move phy attributes into phy_deviceAndrew Lunn2016-01-071-0/+44
| | | | | | | | | | | | | | | | | | | | | | The mdio_bus exports three attributes: - PHY ID is the unique 32-bits identifier for a MDIO device implementing standard MII registers MII_PHYSID1/2, which is not guaranteed to be the case for non-standard compliant devices (e.g: Ethernet switches) - PHY interface describes the data-path of the PHY/MDIO device, which is not strictly a PHY thing, but is required and needed for PHY devices to function, a MDIO device could be a control device exclusively - PHY has fixups describes what the PHY driver may have done, so completely PHY specific These are all phy attributes, not generic mdio attributes. So move the attributes into the phy device code. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: Add API for {un}registering an mdio device to a bus.Andrew Lunn2016-01-071-11/+10
| | | | | | | | | | Rather than have drivers directly manipulate the mii_bus structure, provide and API for registering and unregistering devices on an MDIO bus, and performing lookups. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: Add an mdio_device structureAndrew Lunn2016-01-071-30/+32
| | | | | | | | | Not all devices attached to an MDIO bus are phys. So add an mdio_device structure to represent the generic parts of an mdio device, and place this structure into the phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: Centralise print about attached phyAndrew Lunn2016-01-071-0/+27
| | | | | | | | | | Many Ethernet drivers contain the same netdev_info() print statement about the attached phy. Move it into the phy device code. Additionally add a varargs function which can be used to append additional information. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: add phydev_name() wrapperAndrew Lunn2016-01-071-1/+1
| | | | | | | | Add a phydev_name() function, to help with moving some structure members from phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-11-031-25/+49
|\ | | | | | | | | | | | | | | Minor overlapping changes in net/ipv4/ipmr.c, in 'net' we were fixing the "BH-ness" of the counter bumps whilst in 'net-next' the functions were modified to take an explicit 'net' parameter. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: phy: fix a bug in get_phy_c45_idsShaohui Xie2015-11-021-25/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When probing devices-in-package for a c45 phy, device zero is the last device to probe, however, if driver reads 0 from device zero, c45_ids->devices_in_package is set to '0', the loop condition of probing will be matched again, see codes below: for (i = 1;i < num_ids && c45_ids->devices_in_package == 0;i++) driver will run in a dead loop. This patch restructures the bug and confusing loop, it provides a helper function get_phy_c45_devs_in_pkg which to read devices-in-package registers of a MMD, and rewrites the loop with using the helper function. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | phylib: Add phy_set_max_speed helperSimon Horman2015-10-031-19/+40
|/ | | | | | | | | | | | | | | | | | Add a helper to allow ethernet drivers to limit the speed of a phy (that they are attached to). This mainly involves factoring out the business-end of of_set_phy_supported() and exporting a new symbol. This code seems to be open coded in several places, in several different variants. It is is envisaged that this will be used in situations where setting the "max-speed" property in DT is not appropriate, e.g. because the maximum speed is not a property of the phy hardware. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: add phy_device_remove()Russell King2015-09-241-0/+18
| | | | | | | | | | | | Add a phy_device_remove() function to complement phy_device_register(), which undoes the effects of phy_device_register() by removing the phy device from visibility, but not freeing it. This allows these details to be moved out of the mdio bus code into the phy code where this action belongs. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: add proper phy struct device refcountingRussell King2015-09-241-0/+12
| | | | | | | | | | | Take a refcount on the phy struct device when the phy device is attached to a network device, and drop it after it's detached. This ensures that a refcount is held on the phy device while the device is being used by a network device, thereby preventing the phy_device from being unexpectedly kfree()'d by phy_device_release(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: fix mdiobus module safetyRussell King2015-09-241-14/+18
| | | | | | | | | | | | | | | | | | | | | | | Re-implement the mdiobus module refcounting to ensure that we actually ensure that the mdiobus module code does not go away while we might call into it. The old scheme using bus->dev.driver was buggy, because bus->dev is a class device which never has a struct device_driver associated with it, and hence the associated code trying to obtain a refcount did nothing useful. Instead, take the approach that other subsystems do: pass the module when calling mdiobus_register(), and record that in the mii_bus struct. When we need to increment the module use count in the phy code, use this stored pointer. When the phy is deteched, drop the module refcount, remembering that the phy device might go away at that point. This doesn't stop the mii_bus going away while there are in-use phys - it merely stops the underlying code vanishing. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* phylib: simplify NULL checksSergei Shtylyov2015-08-281-3/+3
| | | | | | | | | | | Fix scripts/checkpatch.pl's messages like: CHECK: Comparison to NULL could be written "!phydrv->read_mmd_indirect" BTW, it doesn't detect the reversed comparisons (which I've fixed as well). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* phylib: simplify bogus phy_device_create() resultSergei Shtylyov2015-08-281-1/+1
| | | | | | | Get rid of the bogus string of type casts where ERR_PTR() is enough. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* phylib: Make PHYs children of their MDIO bus, not the bus' parent.David Daney2015-08-251-1/+1
| | | | | | | | | | | | | | | | | | | | | commit 18ee49ddb0d2 ("phylib: rename mii_bus::dev to mii_bus::parent") changed the parent of PHY devices from the bus to the bus parent. Then, commit 4dea547fef1b ("phylib: rework to prepare for OF registration of PHYs") moved the code into phy_device.c At this point, it is somewhat unclear why the change was seen as necessary. But, when we look at the device model tree in /sys/devices, it is clearly incorrect. The PHYs should be children of their MDIO bus. Change the PHY's parent device to be the MDIO bus device. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/phy: tune get_phy_c45_ids to support more c45 phyShengzhou Liu2015-06-281-6/+14
| | | | | | | | | | | | As some C45 10G PHYs(e.g. Cortina CS4315/CS4340 PHY) have zero Devices In package, current driver can't get correct devices_in_package value by non-zero Devices In package. so let's probe more with zero Devices In package to support more C45 PHYs. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: fix phy link up when limiting speed via device treeMugunthan V N2015-06-281-2/+3
| | | | | | | | | | | | | When limiting phy link speed using "max-speed" to 100mbps or less on a giga bit phy, phy never completes auto negotiation and phy state machine is held in PHY_AN. Fixing this issue by comparing the giga bit advertise though phydev->supported doesn't have it but phy has BMSR_ESTATEN set. So that auto negotiation is restarted as old and new advertise are different and link comes up fine. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: keep track of the PHY suspend stateFlorian Fainelli2015-01-271-4/+18
| | | | | | | | | | In order to avoid double calls to phydev->drv->suspend and resume, keep track of whether the PHY has already been suspended as a consequence of a successful call to phy_suspend(). We will use this in our MDIO bus suspend/resume hooks to avoid a double suspend call. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* phylib: use MDIO_DEVS[12]Sergei Shtylyov2014-08-221-2/+2
| | | | | | | | | The bare register numbers are used despite <uapi/linux/mdio.h> has MDIO_DEVS[12] #define'd for those. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-07-301-1/+14
|\ | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: phy: re-apply PHY fixups during phy_register_deviceFlorian Fainelli2014-07-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 87aa9f9c61ad ("net: phy: consolidate PHY reset in phy_init_hw()") moved the call to phy_scan_fixups() in phy_init_hw() after a software reset is performed. By the time phy_init_hw() is called in phy_device_register(), no driver has been bound to this PHY yet, so all the checks in phy_init_hw() against the PHY driver and the PHY driver's config_init function will return 0. We will therefore never call phy_scan_fixups() as we should. Fix this by calling phy_scan_fixups() and check for its return value to restore the intended functionality. This broke PHY drivers which do register an early PHY fixup callback to intercept the PHY probing and do things like changing the 32-bits unique PHY identifier when a pseudo-PHY address has been used, as well as board-specific PHY fixups that need to be applied during driver probe time. Reported-by: Hauke Merthens <hauke-m@hauke-m.de> Reported-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud