summaryrefslogtreecommitdiffstats
path: root/drivers/net/ixgbe/ixgbe_common.c
Commit message (Collapse)AuthorAgeFilesLines
* intel: Move the Intel wired LAN driversJeff Kirsher2011-08-101-3510/+0
| | | | | | | Moves the Intel wired LAN drivers into drivers/net/ethernet/intel/ and the necessary Kconfig and Makefile changes. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* intel drivers: repair missing flush operationsJesse Brandeburg2011-08-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | after review of all intel drivers, found several instances where drivers had the incorrect pattern of: memory mapped write(); delay(); which should always be: memory mapped write(); write flush(); /* aka memory mapped read */ delay(); explanation: The reason for including the flush is that writes can be held (posted) in PCI/PCIe bridges, but the read always has to complete synchronously and therefore has to flush all pending writes to a device. If a write is held and followed by a delay, the delay means nothing because the write may not have reached hardware (maybe even not until the next read) Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: add support for Dell CEMEmil Tantilov2011-06-211-0/+174
| | | | | | | | | | This patch adds support for Dell CEM (Comprehensive Embedded Management)). This consists of informing the management firmware of the driver version during probe on 82599 and X540 HW. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: consolidate packet buffer allocationJohn Fastabend2011-06-211-0/+66
| | | | | | | | | | | | | | | Consolidate packet buffer allocation currently being done in the DCB path and main path. This allows the feature set and packet buffer requirements to be done once. This is prep work to allow DCB to coexist with other features namely, flow director. CC: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* drivers/net: Remove unnecessary semicolonsJoe Perches2011-06-051-2/+2
| | | | | | | | Semicolons are not necessary after switch/while/for/if braces so remove them. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: force unlock on timeoutEmil Tantilov2011-05-141-0/+22
| | | | | | | | | | | The semaphore can be in locked state upon driver load, particularly on 82598 if a machine is rebooted due to panic and the semaphore was acquired just prior to the panic. This patch unlocks the semaphore if it times out. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: improve EEPROM read/write operationsEmil Tantilov2011-05-041-89/+351
| | | | | | | | | | | | | | | | | | | | Introduce buffered read/writes which greatly improves performance on parts with large EEPROMs. Previously reading/writing a word requires taking/releasing of synchronization semaphores which adds 10ms to each operation. The optimization is to read/write in buffers, but make sure the semaphore is not held for >500ms according to the datasheet. Since we can't read the EEPROM page size ixgbe_detect_eeprom_page_size() is used to discover the EEPROM size when needed and keeps the result in word_page_size for the rest of the run time. Use buffered reads for ethtool -e. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: make device_caps() genericEmil Tantilov2011-04-131-0/+15
| | | | | | | | | | | x540 has the same device capability word in the EEPROM as 82599. This patch renames ixgbe_get_device_caps_82599 to ixgbe_get_device_caps_generic, moves it to ixgbe_common.h and sets up the function pointer for x540. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: fix semaphores in eeprom routines for x540Emil Tantilov2011-04-131-1/+43
| | | | | | | | | | | | | HW can upload EEPROM content from flash while in a middle of checksum calculation. Take NVM ownership for the whole process of checksum update. Call ixgbe_read_eerd_generic() and ixgbe_write_eewr_generic() directly to avoid double take of semaphores which leads to long loading times. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: cleanup short msleep's (<20ms) to use usleep_rangeDon Skidmore2011-04-131-5/+9
| | | | | | | | | Since msleep might not sleep for the desired amount when less than 20ms use usleep_range. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: move disabling of relaxed ordering in start_hw()Emil Tantilov2011-04-131-0/+15
| | | | | | | | | | | Relaxed ordering can lead to issues with some chipsets. This patch makes sure that it is disabled by default and not only when DCA is on. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: refactor common start_hw code for 82599 and x540Emil Tantilov2011-04-131-0/+24
| | | | | | | | | | Factored out the common start_hw code into a new function ixgbe_start_hw_gen2() so that it can be used by x540 and 82599. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Acked-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: fix spelling errorsEmil Tantilov2011-03-071-2/+2
| | | | | | Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Enable flow control pause parameter auto-negotiation supportEmil Tantilov2011-03-071-195/+265
| | | | | | | | | | This patch enables flow control pause parameters auto-negotiation support to 82599 based 10G Base-T, backplane devices and multi-speed fiber optics modules at 1G speed Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Add x540 statistic counter definitionsEmil Tantilov2011-03-071-0/+9
| | | | | | | | | Add defines to accumulate and display x540 PHY statistic counters on transmit/receive. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: clear correct counters for flow control on 82599Emil Tantilov2011-03-071-7/+27
| | | | | | | | The 82599 was not correctly having some of it's counters cleared for flow control. This change corrects that. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: fix missing function pointer conversionDon Skidmore2011-03-071-1/+1
| | | | | | | | | | | | | | In the previous commit: commit 5e655105e3e19d746f9e95c514b014c11c3d1b6a Author: Don Skidmore <donald.c.skidmore@intel.com> Date: Fri Feb 25 01:58:04 2011 +0000 ixgbe: add function pointer for semaphore function there was one release of the semaphore function call which did not get converted to a function pointer. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: cleanup copyright string for 2011Don Skidmore2011-03-031-1/+1
| | | | | | | | | Updating the copyrights for 2011 as well as make the ixgbe_copyright string a constant. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: add function pointer for semaphore functionDon Skidmore2011-03-031-2/+2
| | | | | | | | | | | | The X540 devices grabs semaphores differently than 82599 and 82598 devices do. They do however also grab them in allot of the same functions. So I'm adding a new MAC operation function pointer to allow us to use the correct function based on our MAC type. I'm also changing all the semaphore calls to use this new function pointer. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Numerous whitespace / formatting cleanupsEmil Tantilov2011-03-031-3/+4
| | | | | | | | This patch contains a number of whitespace and formatting cleanups. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Specific check for 100 Full link speedEmil Tantilov2011-03-031-2/+5
| | | | | | | | | This patch specifically checks for 100 Full link speed instead of assuming we are linked at 100 if not linked at 10G and 1G. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Drop unused code for setting up unicast addressesEmil Tantilov2011-03-031-99/+0
| | | | | | | | This change removes the unused code that was setting up the uc_addr_list. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: rework ixgbe MTA handling to not drop packetsEmil Tantilov2011-03-031-59/+9
| | | | | | | | | | | | | This change modifies the ixgbe drivers so that it will not drop the multicast filters while updating them. Instead it uses an intermediate table to store the filter and then writes that filter to the hardware. Based on original patch from Dave Boutcher <daveboutcher@gmail.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Reported-by: Dave Boutcher <daveboutcher@gmail.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Bounds checking for set_rar, clear_rar, set_vmdq, clear_vmdqEmil Tantilov2011-03-031-75/+78
| | | | | | | | | This change makes it so that out of bounds requests to these calls will now return IXGBE_ERR_INVALID_ARGUMENT instead of returning 0. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Check link wants report current link stateEmil Tantilov2011-03-031-1/+10
| | | | | | | | | | | | | Currently check link reports the link state as down, if at any time the link had previously gone down since the last time the LINKS register was read. This does not accurately reflect the function of the check link call, which should be to return the CURRENT link state. Code now reads the LINKS registers twice, once to clear the previous and again to get the current value. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Add ability to double reset on failure to clear master enableEmil Tantilov2011-03-031-6/+41
| | | | | | | | | | | | Double resets are required for recovery from certain error conditions. Between resets, it is necessary to stall to allow time for any pending HW events to complete. We use 1usec since that is what is needed for ixgbe_disable_pcie_master(). The second reset then clears out any effects of those events. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: cleanup logic related to HW semaphoresEmil Tantilov2011-03-031-18/+24
| | | | | | | | | | This change cleans up much of the logic related to the hardware semaphores on the adapters. There were a number of issues with timings that needed to be addressed. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: limit VF access to network trafficAlexander Duyck2011-02-081-0/+3
| | | | | | | | | This change fixes VM pool allocation issues based on MAC address filtering, as well as limits the scope of VF access to promiscuous mode. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Add anti-spoofing feature supportGreg Rose2010-12-241-0/+64
| | | | | | | | | | | Add support for the anti-spoofing feature in the HW. Packets from VF devices with spoofed MAC addresses or VLAN tags will be blocked and a counter incremented. During the watchdog timer the spoofed packet dropped counter is read and if it is non-zero then a warning message is displayed on the host VMM's console. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: add support for new format of PBA numbersDon Skidmore2010-12-031-7/+87
| | | | | | | | | | The new PBA format is stored as a string. This patch allows the driver to support both the old and new format. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: make silicon specific functions genericDon Skidmore2010-11-161-6/+49
| | | | | | | | | | The new MAC type X540 shares much of the same functionality of some silicon specific functions. To reduce duplicate code, made these functions generic. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: DCB set PFC high and low water marks per data sheet specsJohn Fastabend2010-11-161-31/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the high and low water marks for PFC are being set conservatively for jumbo frames. This means the RX buffers are being underutilized in the default 1500 MTU. This patch fixes this so that the water marks are set as described in the data sheet considering the MTU size. The equation used is, RTT * 1.44 + MTU * 1.44 + MTU Where RTT is the round trip time and MTU is the max frame size in KB. To avoid floating point arithmetic FC_HIGH_WATER is defined ((((RTT + MTU) * 144) + 99) / 100) + MTU This changes how the hardware field fc.low_water and fc.high_water are used. With this change they are no longer storing the actual low water and high water markers but are storing the required head room in the buffer. This simplifies the logic and we do not need to account for the size of the buffer when setting the thresholds. Testing with iperf and 16 threads showed a slight uptick in throughput over a single traffic class .1-.2Gbps and a reduction in pause frames. Without the patch a 30 second run would show ~10-15 pause frames being transmitted with the patch ~2-5 are seen. Test were run back to back with 82599. Note RXPBSIZE is in KB and low and high water marks fields are also in KB. However the FCRT* registers are 32B granularity and right shifted 5 into the register, (((rx_pbsize - water_mark) * 1024) / 32) << 5 is the most explicit conversion here we simplify (rx_pbsize - water_mark) * 32 << 5 = (rx_pbsize - water_mark) << 10 This patch updates the PFC thresholds and legacy FC thresholds. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: declare functions as staticEmil Tantilov2010-10-141-2/+3
| | | | | | | | | | | | Following patch fixes warnings reported by `make namespacecheck` Reported by Stephen Hemminger CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: remove unused functionsEmil Tantilov2010-10-141-45/+0
| | | | | | | | | | | | | Remove functions that are declared, but not used in the driver. This patch fixes warnings reported by `make namespacecheck` Reported by Stephen Hemminger CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: return IXGBE_ERR_RAR_INDEX when out of rangeJeff Kirsher2010-06-031-0/+2
| | | | | | | | | | | Based on original patch from Shirley Ma <xma@us.ibm.com> Return IXGBE_ERR_RAR_INDEX when RAR index is out of range, instead of returning IXGBE_SUCCESS. CC: Shirley Ma <xma@us.ibm.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: Refactor common code between 82598 & 82599 to accommodate new hardwareMallikarjuna R Chilakala2010-05-131-13/+505
| | | | | | | | | | | | Some of the following MAC functions are moved from 82598 & 82599 specific hardware files to common.[ch] to accommodate new silicon changes. Also fixed some white space issues * get_san_mac_addr, check_link, set_vmdq, clear_vmdq, clear_vfta, * set_vfta, fc_enable, init_uta_tables Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: fix setting of promisc mode when using mac-vlansEmil Tantilov2010-05-131-1/+4
| | | | | | | | | | | | Introduce uc_set_promisc flag to fix enabling of promisc mode when exceeding the number of supported RAR entries. Issue discovered by Ben Greear when using mac-vlans. Reported-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: convert multicast list to list_headJiri Pirko2010-04-031-3/+3
| | | | | | | | | | | | | Converts the list and the core manipulating with it to be the same as uc_list. +uses two functions for adding/removing mc address (normal and "global" variant) instead of a function parameter. +removes dev_mcast.c completely. +exposes netdev_hw_addr_list_* macros along with __hw_addr_* functions for manipulation with lists on a sandbox (used in bonding and 80211 drivers) Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: convert to use netdev_for_each_mc_addrJiri Pirko2010-03-261-9/+7
| | | | | | Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: use helpers to access uc list V2Jiri Pirko2010-01-251-4/+3
| | | | | | | This patch introduces three macros to work with uc list from net drivers. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2010-01-231-1/+1
|\ | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
| * ixgbe: update copyright datesShannon Nelson2010-01-131-1/+1
| | | | | | | | | | | | Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | drivers/net/ixgbe/ixgbe_common.c: use %pM to show MAC addresshartleys2010-01-071-10/+2
|/ | | | | | | | | | | Use the %pM kernel extension to display the MAC address. The only difference in the output is that the MAC address is shown in the usual colon-separated hex notation. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: Fix Receive Address Register (RAR) cleaning and accountingShannon Nelson2009-11-291-4/+4
| | | | | | | | | | This fixes an issue when clearing out the RAR entries. If RAR[0] is the only address in use, don't clear the others. Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: LINKS2 is not a valid register for 82598Don Skidmore2009-11-291-4/+11
| | | | | | | | | | 82598 shouldn't try and access LINKS2 while configuring link and flow control. This is an 82599-only register. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: Disable Flow Control for certain devicesPJ Waskiewicz2009-11-291-0/+14
| | | | | | | | | | | Flow Control autoneg should be disabled for certain adapters that don't support autonegotiation of Flow Control at 10 gigabit. These interfaces are the 10GBASE-T devices, CX4, and SFP+, all running at 10 gigabit only. 1 gigabit is fine. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: correct the parameter descriptionJiri Pirko2009-10-011-3/+1
| | | | | | | | | | | ccffad25b5136958d4769ed6de5e87992dd9c65c changed parameters for function ixgbe_update_uc_addr_list_generic but parameter description was not updated. This patch corrects it. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: Fix backplane flow control autonegPeter P Waskiewicz Jr2009-09-301-51/+177
| | | | | | | | | | Backplane flow control autonegotiation is currently broken for ixgbe devices. This patch fixes the flow control issues with clause 37 autoneg. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: cleanup functions that should have been defined staticDon Skidmore2009-08-261-1/+2
| | | | | | | | | We have some ~40 functions that were being called out with 'make namespacecheck'. This patch changes these functions to be static. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: Add FW detection and warning for 82599 SFP+ adaptersPeter P Waskiewicz Jr2009-06-071-4/+8
| | | | | | | | | | | | | | | | 82599 has a FW running that helps manage the internal SFI PHY. There are also a number of pre-production samples of these SFI-based devices in the field. This patch adds a check to look for the firmware running on all SFP+ based adapters, and displays a warning to the system log if a pre-production adapter is identified. The driver will continue loading though, with no functional degradation. Also remove an old function prototype from ixgbe_82599.c that isn't being used. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud