summaryrefslogtreecommitdiffstats
path: root/drivers/net/gianfar.h
Commit message (Collapse)AuthorAgeFilesLines
* gianfar: Add hardware TX timestamping supportManfred Rudigier2010-04-131-1/+2
| | | | | | | | | | | | | | | If a packet has the skb_shared_tx->hardware flag set the device is instructed to generate a TX timestamp and write it back to memory after the frame is transmitted. During the clean_tx_ring operation the timestamp will be extracted and copied into the skb_shared_hwtstamps struct of the skb. TX timestamping is enabled by setting the tx_type to something else than HWTSTAMP_TX_OFF with the SIOCSHWTSTAMP ioctl command. It is only supported by eTSEC devices. Signed-off-by: Manfred Rudigier <manfred.rudigier@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: Add hardware RX timestamping supportManfred Rudigier2010-04-131-0/+5
| | | | | | | | | | | | | | | The device is configured to insert hardware timestamps into all received packets. The RX timestamps are extracted from the padding alingment bytes during the clean_rx_ring operation and copied into the skb_shared_hwtstamps struct of the skb. This extraction only happens if the rx_filter was set to something else than HWTSTAMP_FILTER_NONE with the SIOCSHWTSTAMP ioctl command. Hardware timestamping is only supported for eTSEC devices. To indicate device support the new FSL_GIANFAR_DEV_HAS_TIMER flag was introduced. Signed-off-by: Manfred Rudigier <manfred.rudigier@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: fix undo of reserve()Ben Menchaca2010-03-261-0/+6
| | | | | | | | | | | | Fix undo of reserve() before RX recycle gfar_new_skb reserve()s space in the SKB to align it. If an error occurs, and the skb needs to be returned to the RX recycle queue, the current code attempts to reset head, but did not reset tail. This patch remembers the alignment amount, and reverses the reserve() when needed. Signed-off-by: Ben Menchaca <ben@bigfootnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: Fix bit definitions of IMASK_GRSC and IMASK_GTSCSandeep Gopalpet2009-12-181-2/+2
| | | | | Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: Fix stats supportSandeep Gopalpet2009-12-181-0/+10
| | | | | | | | | | | | | | This patch updates the per rx/tx queue stats. To update the per rx queue stats a new structure has been introduced rx_q_stats. The per tx queue stats are updated via the netdev_queue structure itself. Note that we update only the tx_packtes, tx_bytes, rx_packets, rx_bytes and rx_dropped stats on a per queue basis. Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: Fix a filer bugSandeep Gopalpet2009-12-181-0/+4
| | | | | | | | | | We need to enable filer whenever we need to use multiple RX queues. Also, need to program RIR0 register with the required distribution we require, if using RX filer hashing support for packet distribution to multiple queues. Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: Fix compiler and sparse warningsAnton Vorontsov2009-11-081-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit fba4ed030cfae7efdb6b79a57b0c5a9d72c9de83 ("gianfar: Add Multiple Queue Support") introduced the following warnings: CHECK gianfar.c gianfar.c:333:8: warning: incorrect type in assignment (different address spaces) gianfar.c:333:8: expected unsigned int [usertype] *baddr gianfar.c:333:8: got unsigned int [noderef] <asn:2>*<noident> [... 67 lines skipped ...] gianfar.c:2565:3: warning: incorrect type in argument 1 (different type sizes) gianfar.c:2565:3: expected unsigned long const *addr gianfar.c:2565:3: got unsigned int *<noident> CC gianfar.o gianfar.c: In function 'gfar_probe': gianfar.c:985: warning: passing argument 1 of 'find_next_bit' from incompatible pointer type gianfar.c:985: warning: passing argument 1 of 'find_next_bit' from incompatible pointer type gianfar.c:993: warning: passing argument 1 of 'find_next_bit' from incompatible pointer type gianfar.c:993: warning: passing argument 1 of 'find_next_bit' from incompatible pointer type gianfar.c: In function 'gfar_configure_coalescing': gianfar.c:1680: warning: passing argument 1 of 'find_next_bit' from incompatible pointer type gianfar.c:1680: warning: passing argument 1 of 'find_next_bit' from incompatible pointer type gianfar.c:1688: warning: passing argument 1 of 'find_next_bit' from incompatible pointer type gianfar.c:1688: warning: passing argument 1 of 'find_next_bit' from incompatible pointer type gianfar.c: In function 'gfar_poll': gianfar.c:2565: warning: passing argument 1 of 'find_next_bit' from incompatible pointer type gianfar.c:2565: warning: passing argument 1 of 'find_next_bit' from incompatible pointer type gianfar.c:2566: warning: passing argument 2 of 'test_bit' from incompatible pointer type gianfar.c:2585: warning: passing argument 2 of 'set_bit' from incompatible pointer type Following warnings left unfixed (looks like sparse doesn't like locks in loops, so __acquires/__releases() doesn't help): gianfar.c:441:40: warning: context imbalance in 'lock_rx_qs': wrong count at exit gianfar.c:441:40: context '<noident>': wanted 0, got 1 gianfar.c:449:40: warning: context imbalance in 'lock_tx_qs': wrong count at exit gianfar.c:449:40: context '<noident>': wanted 0, got 1 gianfar.c:458:3: warning: context imbalance in 'unlock_rx_qs': __context__ statement expected different context gianfar.c:458:3: context '<noident>': wanted >= 0, got -1 gianfar.c:466:3: warning: context imbalance in 'unlock_tx_qs': __context__ statement expected different context gianfar.c:466:3: context '<noident>': wanted >= 0, got -1 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: Basic Support for programming hash rulesSandeep Gopalpet2009-11-021-0/+93
| | | | | | | | This patch provides basic hash rules programming via the ethtool interface. Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: Add Multiple group SupportSandeep Gopalpet2009-11-021-1/+28
| | | | | | | | | | | | | | | This patch introduces multiple group support for etsec2.0 devices. Multiple group support is provided by mapping the set of enabled queues to different groups and then programming the per group regsiters imask, ievent, rstat, tstat. The queues corresponding to a group are indicated by programming isrg (interrupt steering) registers. Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: Add support etsec2.0 registers.Sandeep Gopalpet2009-11-021-11/+44
| | | | | | | This patch adds support for etsec2.0 regsiters Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: Add Multiple Queue SupportSandeep Gopalpet2009-11-021-5/+91
| | | | | | | | | | | | | | | This patch introduces multiple Tx and Rx queues. The incoming packets can be classified into different queues based on filer rules (out of scope of this patch). The number of queues enabled will be based on a DTS entries fsl,num_tx_queues and fsl,num_rx_queues. Although we are enabling multiple queues, the interrupt coalescing is on per device level (etsec-1.7 doesn't support multiple rxics and txics). Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: Introduce logical group support.Sandeep Gopalpet2009-11-021-11/+27
| | | | | | | | | | | | | | | This patch introduces the group structure. The elements of this structure are the interrupt lines, their corresponding names, the register memory map. The elements for this group are factored out from the gfar_private structure. The introduction of group structure will help in providing support for newer versions of etsec. Currently, the support is present only for single group and single tx/rx queues. Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: Add per queue structure supportSandeep Gopalpet2009-11-021-41/+75
| | | | | | | | | | | | | This patch introduces per tx and per rx queue structures. Earlier the members of these structures were inside the gfar_private structure. Moving forward if we want to support multiple queues, we need to refactor the gfar_private structure so that introduction of multiple queues is easier. Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: Move tbase/rbase initialization to gfar_init_mac()Anton Vorontsov2009-10-121-0/+1
| | | | | | | | | For hibernation we want to call gfar_init_mac() without need to free/allocate_skb_resources sequence, so save the DMA address into a private struct, and move tbase/rbase initialization to gfar_init_mac(). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2009-06-031-1/+1
|\ | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/forcedeth.c
| * gianfar: fix babbling rx error event bugXiaotian Feng2009-05-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | Gianfar interrupt handler uses IEVENT_ERR_MASK to check and handle errors. Babbling RX error (IEVENT_BABR) should be included in IEVENT_ERROR_MASK. Otherwise if BABR is raised, it never gets handled nor cleared, and an interrupt storm results. This has been observed to happen on sending a burst of ethernet frames to a gianfar based board. Signed-off-by: Xiaotian Feng <xiaotian.feng@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: Rework gianfar driver to use of_mdio infrastructure.Grant Likely2009-04-271-2/+2
|/ | | | | | | | | | This patch simplifies the driver by making use of more common code. Tested on Freescale MPC8349emitxgp eval board Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: Remove unused headerKumar Gala2009-04-021-1/+0
| | | | | | | | Now that the driver is exclusively an of_platform driver we no longer use the structs and #defines in fsl_devices.h Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: pass the proper dev to DMA opsKumar Gala2009-03-181-1/+2
| | | | | | | | | | We need to be passing the of_platform device struct into the DMA ops as its the one that has the archdata setup to know which low-level DMA ops we should be using (not the net_device one). This isn't an issue until we expect the archdata to be setup correctly. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2009-02-041-1/+1
|\ | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
| * gianfar: Fix BD_LENGTH_MASK definitionAndy Fleming2009-02-041-1/+1
| | | | | | | | | | | | | | | | | | BD_LENGTH_MASK is supposed to catch the low 16-bits of the status field, not the low byte. The old way, we would never be able to clean up tx packets with sizes divisible by 256. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | gianfar: Add support for skb recyclingAndy Fleming2009-02-041-0/+2
| | | | | | | | | | Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | netdev: Merge UCC and gianfar MDIO bus driversAndy Fleming2009-02-041-7/+6
| | | | | | | | | | | | | | | | The MDIO bus drivers for the UCC and gianfar ethernet controllers are essentially the same. There's no reason to duplicate that much code. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | gianfar: Fix sparse warningsAnton Vorontsov2009-02-011-0/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | This patch fixes following sparse warnings: CHECK gianfar_ethtool.c gianfar_ethtool.c:610:26: warning: symbol 'gfar_ethtool_ops' was not declared. Should it be static? CHECK gianfar_mii.c gianfar_mii.c:108:35: warning: cast adds address space to expression (<asn:2>) gianfar_mii.c:119:35: warning: cast adds address space to expression (<asn:2>) gianfar_mii.c:128:35: warning: cast adds address space to expression (<asn:2>) gianfar_mii.c:272:5: warning: cast removes address space of expression gianfar_mii.c:271:15: warning: cast adds address space to expression (<asn:2>) gianfar_mii.c:340:11: warning: cast adds address space to expression (<asn:2>) CHECK gianfar_sysfs.c gianfar_sysfs.c:84:1: warning: symbol 'dev_attr_bd_stash' was not declared. Should it be static? gianfar_sysfs.c:133:1: warning: symbol 'dev_attr_rx_stash_size' was not declared. Should it be static? gianfar_sysfs.c:175:1: warning: symbol 'dev_attr_rx_stash_index' was not declared. Should it be static? gianfar_sysfs.c:213:1: warning: symbol 'dev_attr_fifo_threshold' was not declared. Should it be static? gianfar_sysfs.c:250:1: warning: symbol 'dev_attr_fifo_starve' was not declared. Should it be static? gianfar_sysfs.c:287:1: warning: symbol 'dev_attr_fifo_starve_off' was not declared. Should it be static? Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: Merge Tx and Rx interrupt for scheduling clean up ringDai Haruki2008-12-171-1/+1
| | | | | | | | No clean up function is executed in the interrupt context by this patch. Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: Use interface name in interrupt name to distinguish the source.Dai Haruki2008-12-171-0/+7
| | | | | | | | | | Interface name (ex. eth0) is used as the prefix for the interrupt name, with _rx, _tx, and _er appended to distinguish multiple interrupts on the same interface. Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: Add Scatter Gather supportDai Haruki2008-12-171-0/+1
| | | | | | | | | | Scatter Gather support in gianfar driver to handle fragmented frames on the transmit side. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: Make all BD status writes 32-bitDai Haruki2008-12-161-4/+16
| | | | | | | | | | | | Whenever we want to update the status field in a BD, we usually want to update the length field, too. By combining them into one 32-bit field, we reduce the number of stores to memory shared with the controller, and we eliminate the need for order-enforcement, as the length and "READY" bit are now updated atomically at the same time. Signed-off-by: Dai Haruki <Dai.Haruki@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: Add macros for stepping through BDsAndy Fleming2008-12-161-0/+6
| | | | | | | | | | | | | | This code is based strongly on code from Dai Haruki <Dai.Haruki@freescale.com>. The gianfar Buffer Descriptors are arranged in a circular array, the end of which is denoted by setting the "WRAP" bit in the descriptor. However, the software knows the end of the ring because it knows how many descriptors are there. Rather than check each descriptor for whether the WRAP bit is set, use pointer math to determine where the next BD is. This is also useful for when we want to look at BDs other than the very next one (for Scatter-Gather). Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: Fix VLAN HW feature related frame/buffer size calculation.Dai Haruki2008-12-161-4/+5
| | | | | | | | Optimize the VLAN checking logic as well. Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: Optimize interrupt coalescing configurationDai Haruki2008-12-161-4/+8
| | | | | | | | | | Store the interrupt coalescing values in the form in which they will be written to the interrupt coalescing registers. This puts a little overhead into the ethtool configuration, and takes it out of the interrupt handler Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: Convert gianfar to an of_platform_driverAndy Fleming2008-12-161-3/+18
| | | | | | | | | | | Does the same for the accompanying MDIO driver, and then modifies the TBI configuration method. The old way used fields in einfo, which no longer exists. The new way is to create an MDIO device-tree node for each instance of gianfar, and create a tbi-handle property to associate ethernet controllers with the TBI PHYs they are connected to. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: don't grab a mutex within a timer context in gianfarSebastian Siewior2008-08-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I got the following backtrace while network was unavailble: |NETDEV WATCHDOG: eth0: transmit timed out |BUG: sleeping function called from invalid context at /home/bigeasy/git/linux-2.6-powerpc/kernel/mutex.c:87 |in_atomic():1, irqs_disabled():0 |Call Trace: |[c0383d90] [c0006dd8] show_stack+0x48/0x184 (unreliable) |[c0383db0] [c001e938] __might_sleep+0xe0/0xf4 |[c0383dc0] [c025a43c] mutex_lock+0x24/0x3c |[c0383de0] [c019005c] phy_stop+0x20/0x70 |[c0383df0] [c018d4ec] stop_gfar+0x28/0xf4 |[c0383e10] [c018e8c4] gfar_timeout+0x30/0x60 |[c0383e20] [c01fe7c0] dev_watchdog+0xa8/0x144 |[c0383e30] [c002f93c] run_timer_softirq+0x148/0x1c8 |[c0383e60] [c002b084] __do_softirq+0x5c/0xc4 |[c0383e80] [c00046fc] do_softirq+0x3c/0x54 |[c0383e90] [c002ac60] irq_exit+0x3c/0x5c |[c0383ea0] [c000b378] timer_interrupt+0xe0/0xf8 |[c0383ec0] [c000e5ac] ret_from_except+0x0/0x18 |[c0383f80] [c000804c] cpu_idle+0xcc/0xdc |[c0383fa0] [c025c07c] etext+0x7c/0x90 |[c0383fc0] [c0338960] start_kernel+0x294/0x2a8 |[c0383ff0] [c00003dc] skpinv+0x304/0x340 |------------[ cut here ]------------ The phylock was once a spinlock but got changed into a mutex via commit 35b5f6b1a aka [PHYLIB: Locking fixes for PHY I/O potentially sleeping] Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* Merge commit 'origin/master'Benjamin Herrenschmidt2008-07-221-11/+0
|\ | | | | | | | | Manually fixed up: drivers/net/fs_enet/fs_enet-main.c
| * gianfar: delete non NAPI code from the driver.Francois Romieu2008-07-111-11/+0
| | | | | | | | | | | | | | Compile-tested only. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* | gianfar: Add magic packet and suspend/resume support.Scott Wood2008-07-161-2/+10
|/ | | | | Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* gianfar: Fix a locking bug in gianfar's sysfs codeAndy Fleming2008-05-061-0/+3
| | | | | | | | | During sparse cleanup, found a locking bug. Some of the sysfs functions were acquiring a lock, and then returning in the event of an error. We rearrange the code so that the lock is released in error conditions, too. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* [netdrvr] gianfar: Determine TBIPA value dynamicallyPaul Gortmaker2008-04-291-1/+0
| | | | | | | | | | | | | | TBIPA needs to be set to a value (on connected MDIO buses) that doesn't conflict with PHYs on the bus. By hardcoding it to 0x1f, we were preventing boards with PHYs at 0x1f from working properly. Instead, scan the bus when it comes up, and find an address that doesn't have a PHY on it. The TBI PHY configuration code then trusts that the value in TBIPA is either safe, or doesn't matter (ie - it's not an active bus with other PHYs). Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* gianfar: Support NAPI for TX FramesDai Haruki2008-04-161-2/+11
| | | | | | | | | | | | Poll the completed TX frames in gfar_poll(). This prevents the tx completion interrupt from interfering with processing of received frames. We also disable hardware rx coalescing when NAPI is enabled. Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* gianfar: Fix Rx/Tx HW interrupt coalescing counter reset procedure.Andy Fleming2008-03-261-2/+2
| | | | | | | | | | | | | | - Fix Rx/Tx HW interrupt coalescing counter reset logic. Disabling is required before resetting the counter. - Update the Default both Rx and Tx coalescing timer threshold. Formerly 4 is set which is equal to 1.5 frame at the line rate of 1GbE interface, and it doesn't match to the coalescing frame count which is set to 16. Threashold 21 is matched to frame count 16. Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* gianfar: Only process completed framesAndy Fleming2008-03-261-0/+3
| | | | | | | | | | | If the LAST bit is not set in the RxBD, it's possible we're processing an incomplete frame, which is bad. While we're at it, add a constant for the error bitmask, so the whole if-clause fits on one line, and is more legible. Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* gianfar: Fix the data buffer stashing amountDai Haruki2008-03-261-1/+1
| | | | | | | | - Buffer stashing parameter change to 96 from 64 in order to cover the Layer 4 header. Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* gianfar: remove orphan struct.Sebastian Siewior2007-10-171-1/+0
| | | | | | | | | struct net_device_stats is no longer used in driver's private struct but in struct net_device. Cc: Li Yang <leoli@freescale.com> Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Clean up duplicate includes in drivers/net/Jesper Juhl2007-10-101-1/+0
| | | | | | | | | | This patch cleans up duplicate includes in drivers/net/ Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Acked-by: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [NET]: Make NAPI polling independent of struct net_device objects.Stephen Hemminger2007-10-101-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: add support for SGMIIKapil Juneja2007-07-081-0/+6
| | | | | | | | | | | | | | | | | | | Add code for initialising and configuring TBI interface and programming it for connecting to on-chip SERDES (Lynx PHY) in case of SGMII mode selected through HRCW at reset. also add defines for TBI register configuration. TBI interface is programmed towards the SERDES. refactored mdio read/write functions to differentiate programming local interface MII regs (e.g., for TBI) from always programming the mdio master (TSEC1, for programming the PHYs). Signed-off-by: Kapil Juneja <Kapil.Juneja@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] PHY: Add support for configuring the PHY connection interfaceAndy Fleming2006-12-021-0/+3
| | | | | | | | | | | | | | | | | | | | Most PHYs connect to an ethernet controller over a GMII or MII interface. However, a growing number are connected over different interfaces, such as RGMII or SGMII. The ethernet driver will tell the PHY what type of connection it is by setting it manually, or passing it in through phy_connect (or phy_attach). Changes include: * Updates to documentation * Updates to PHY Lib consumers * Changes to PHY Lib to add interface support * Some minor changes to whitespace in phy.h * gianfar driver now detects interface and passes appropriate value to PHY Lib Signed-off-by: Andrew Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells2006-10-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
* drivers/net: const-ify ethtool_ops declarationsJeff Garzik2006-09-131-2/+0
| | | | Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Remove obsolete #include <linux/config.h>Jörn Engel2006-06-301-1/+0
| | | | | Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
OpenPOWER on IntegriCloud