summaryrefslogtreecommitdiffstats
path: root/drivers/net/fec_mpc52xx.c
Commit message (Collapse)AuthorAgeFilesLines
* net: use netdev_mc_count and netdev_mc_empty when appropriateJiri Pirko2010-02-121-1/+1
| | | | | | | | | | | This patch replaces dev->mc_count in all drivers (hopefully I didn't miss anything). Used spatch and did small tweaks and conding style changes when it was suitable. Jirka Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mpc5200: Fix locking on fec_mpc52xx driverAsier Llano2009-12-081-59/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the locking scheme on the fec_mpc52xx driver. This device can receive IRQs from three sources; the FEC itself, the tx DMA, and the rx DMA. Mutual exclusion was handled by taking a spin_lock() in the critical regions, but because the handlers are run with IRQs enabled, spin_lock() is insufficient and the driver can end up interrupting a critical region anyway from another IRQ. Asier Llano discovered that this occurs when an error IRQ is raised in the middle of handling rx irqs which resulted in an sk_buff memory leak. In addition, locking is spotty at best in the driver and inspection revealed quite a few places with insufficient locking. This patch is based on Asier's initial work, but reworks a number of things so that locks are held for as short a time as possible, so that spin_lock_irqsave() is used everywhere, and so the locks are dropped when calling into the network stack (because the lock only protects the hardware interface; not the network stack). Boot tested on a lite5200 with an NFS root. Has not been performance tested. Signed-off-by: Asier Llano <a.llano@ziv.es> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net: request_irq - Remove unnecessary leading & from second argJoe Perches2009-11-181-3/+3
| | | | | | | | | | | | Not as fancy as coccinelle. Checkpatch errors ignored. Compile tested allyesconfig x86, not all files compiled. grep -rPl --include=*.[ch] "\brequest_irq\s*\([^,\)]+,\s*\&" drivers/net | while read file ; do \ perl -i -e 'local $/; while (<>) { s@(\brequest_irq\s*\([^,\)]+,\s*)\&@\1@g ; print ; }' $file ;\ done Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/fec_mpc52xx: Fix kernel panic on FEC errorJohn Bonesio2009-10-141-6/+0
| | | | | | | | | | | | | | The MDIO bus cannot be accessed at interrupt context, but on an FEC error, the fec_mpc52xx driver reset function also tries to reset the PHY. Since the error is detected at IRQ context, and the PHY functions try to sleep, the kernel ends up panicking. Resetting the PHY on an FEC error isn't even necessary. This patch solves the problem by removing the PHY reset entirely. Signed-off-by: John Bonesio <bones@secretlab.ca> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net: fixed drivers that support netpoll use ndo_start_xmit()Dongdong Deng2009-08-231-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | The NETPOLL API requires that interrupts remain disabled in netpoll_send_skb(). The use of "A functions set" in the NETPOLL API callbacks causes the interrupts to get enabled and can lead to kernel instability. The solution is to use "B functions set" to prevent the irqs from getting enabled while in netpoll_send_skb(). A functions set: local_irq_disable()/local_irq_enable() spin_lock_irq()/spin_unlock_irq() spin_trylock_irq()/spin_unlock_irq() B functions set: local_irq_save()/local_irq_restore() spin_lock_irqsave()/spin_unlock_irqrestore() spin_trylock_irqsave()/spin_unlock_irqrestore() Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge commit 'gcl/merge' into nextBenjamin Herrenschmidt2009-06-181-1/+1
|\ | | | | | | | | Manual merge of: drivers/net/fec_mpc52xx.c
| * powerpc/5xxx: Add common mpc5xxx_get_bus_frequency() functionWolfgang Denk2009-06-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | So far, MPC512x used mpc512x_find_ips_freq() to get the bus frequency, while MPC52xx used mpc52xx_find_ipb_freq(). Despite the different clock names (IPS vs. IPB) the code was identical. Use common code for both processor families. Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | net: Rework mpc5200 fec driver to use of_mdio infrastructure.Grant Likely2009-04-271-127/+53
|/ | | | | | | | | | | | | | | The patch reworks the MPC5200 Fast Ethernet Controller (FEC) driver to use the of_mdio infrastructure for registering PHY devices from data out openfirmware device tree, and eliminates the assumption that the PHY for the FEC is always attached to the FEC's own MDIO bus. With this patch, the FEC can use a PHY attached to any MDIO bus if it is described in the device tree. Tested on Freescale Lite5200b eval board Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2009-04-021-33/+44
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (54 commits) glge: remove unused #include <version.h> dnet: remove unused #include <version.h> tcp: miscounts due to tcp_fragment pcount reset tcp: add helper for counter tweaking due mid-wq change hso: fix for the 'invalid frame length' messages hso: fix for crash when unplugging the device fsl_pq_mdio: Fix compile failure fsl_pq_mdio: Revive UCC MDIO support ucc_geth: Pass proper device to DMA routines, otherwise oops happens i.MX31: Fixing cs89x0 network building to i.MX31ADS tc35815: Fix build error if NAPI enabled hso: add Vendor/Product ID's for new devices ucc_geth: Remove unused header gianfar: Remove unused header kaweth: Fix locking to be SMP-safe net: allow multiple dev per napi with GRO r8169: reset IntrStatus after chip reset ixgbe: Fix potential memory leak/driver panic issue while setting up Tx & Rx ring parameters ixgbe: fix ethtool -A|a behavior ixgbe: Patch to fix driver panic while freeing up tx & rx resources ...
| * net/fec_mpc52xx: Don't dereference phy_device if it is NULLGrant Likely2009-04-021-10/+12
| | | | | | | | | | | | | | | | | | | | The FEC Ethernet device isn't always attached to a phy. Be careful not to dereference phy_device if it is NULL. Also eliminates an unnecessary extra function from the ioctl path. Reported-by: Henk Stegeman <henk.stegeman@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net/fec_mpc52xx: Migrate to net_device_ops.Henk Stegeman2009-04-021-16/+20
| | | | | | | | | | | | | | | | | | | | Since not using net_device_ops gets you shunned out the cool crowd, this patch modifies the fec_mpc52xx Ethernet driver to provide the management hooks via a struct net_device_ops. Reported-by: Henk Stegeman <henk.stegeman@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net/fec_mpc52xx: fix BUG on missing dma_opsGrant Likely2009-04-021-7/+12
| | | | | | | | | | | | | | | | | | | | | | The driver triggers a BUG_ON() when allocating DMA buffers because the arch/powerpc dma_ops aren't in the net_device's struct device. This patch fixes the problem by using the parent of_device which does have the correct dma_ops set. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | powerpc/5200: Stop using device_type and port-number propertiesGrant Likely2009-02-031-3/+3
|/ | | | | | | | | | | | | | | | There is no reason for the PSC UART driver or the Ethernet driver to require a device_type property. The compatible value is sufficient to uniquely identify the device. Remove it from the driver. The whole 'port-number' scheme for assigning numbers to PSC uarts was always rather half baked and just adds complexity. Remove it from the driver. After this patch is applied, PSC UART numbers are simply assigned from the order they are found in the device tree (just like all the other devices). Userspace can query sysfs to determine what ttyPSC number is assigned to each PSC instance. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
* net: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers2008-11-101-1/+1
| | | | | | | Acked-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net: Kill now superfluous ->last_rx stores.David S. Miller2008-11-031-1/+0
| | | | | | | | | | | | | The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Drivers need not do it any more. Some cases had to be skipped over because the drivers were making use of the ->last_rx value themselves. Signed-off-by: David S. Miller <davem@davemloft.net>
* [netdrvr] fec_mpc52xx: Implement polling, to make netconsole work.Jon Smirl2008-10-221-0/+18
| | | | | | | | Implement polling for 5200FEC to make netconsole work. Tested on Phytec pcm030 and Efika. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* netdev: bunch of drivers: avoid WARN at net/core/dev.c:1328Anton Vorontsov2008-07-221-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The drivers were touching net queue before it has been started, so without this patch, the drivers will potentially WARN at net/core/dev.c:1328. I don't have the hardware for the drivers below, so this patch is untested, and thus should be carefully peer reviewed. tc35815.c au1000_eth.c bfin_mac.c macb.c ^ The four drivers are using phylib, they're calling netif_start_queue() in open() callback. So trivially remove netif_tx_schedule_all(). Phylib will handle netif_carrier_*(). cpmac.c fec_mpc52xx.c fs_enet/fs_enet-main.c sh_eth.c ^ The same as above, but these were also needlessly calling netif_carrier_*() functions. So removed queue calls and also remove carrier calls, since phylib will handle it. fs_enet-main.c also didn't call netif_start_queue() at open(), this is fixed now. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: Convert all drivers away from netif_schedule().David S. Miller2008-07-171-1/+1
| | | | | | | They logically all want to trigger a schedule for all device TX queues. Signed-off-by: David S. Miller <davem@davemloft.net>
* fec_mpc52xx: MPC52xx_MESSAGES_DEFAULT: 2nd NETIF_MSG_IFDOWN => IFUPRoel Kluin2008-06-111-1/+1
| | | | | | | | | | Duplicate NETIF_MSG_IFDOWN, 2nd should be NETIF_MSG_IFUP Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Sylvain Munaut <tnt@246tNt.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* [POWERPC] mpc5200: Allow for fixed speed MII configurationsGrant Likely2008-05-011-23/+74
| | | | | | | | | | | Various improvements for configuring the MPC5200 MII link from the device tree: * Look for 'current-speed' property for fixed speed MII links * Look for 'fsl,7-wire-mode' property for boards using the 7 wire mode * move definition of private data structure out of the header file Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Wolfgang Grandegger <wg@grandegger.com>
* [POWERPC] mpc5200: Fix FEC error handling on FIFO errorsSascha Hauer2008-04-291-10/+13
| | | | | | | | | | | | | | | The error handling for the mpc5200 fec interrupt is broken. The intended behaviour is like this: * If one of FEC_IEVENT_RFIFO_ERROR and FEC_IEVENT_XFIFO_ERROR happens, the datasheet says (MPC5200B User's Guide R1.2, p. 14-13): "When this occurs, software must ensure both the FIFO Controller and BestComm are soft-reset". * On any other error (non-TFINT) interrupt, just issue a debug message. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* Merge branch 'master' of ↵David S. Miller2008-04-171-0/+1
|\ | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
| * [POWERPC] Fix MPC5200 (not B!) device tree so FEC ethernet worksRené Bürgel2008-04-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This gets the FEC ethernet driver working again on the lite5200 platform. The FEC driver is also compatible with the MPC5200, not only with the MPC5200B, so this adds a suitable entry to the driver's match list. Furthermore this adds the settings for the PHY in the dts file for the Lite5200. Note, that this is not exactly the same as in the Lite5200B, because the PHY is located at f0003000:01 for the 5200, and at :00 for the 5200B. This was tested on a Lite5200 and a Lite5200B, both booted a kernel via tftp and mounted the root via nfs successfully. Signed-off-by: René Bürgel <r.buergel@unicontrol.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
* | phy: Change mii_bus id field to a stringAndy Fleming2008-04-161-1/+1
|/ | | | | | | | | | Having the id field be an int was making more complex bus topologies excessively difficult. For now, just convert it to a string, and change all instances of "bus->id = val" to snprintf(id, MII_BUS_ID_LEN, "%x", val). Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* [POWERPC] mpc5200: normalize compatible property bindingsGrant Likely2008-01-261-4/+2
| | | | | | | | | | | | | | Update MPC5200 drivers to also look for compatible properties in the form "fsl,mpc5200-*" to better conform to open firmware generic names recommended practice as published here: http://www.openfirmware.org/1275/practice/gnames/gnamv14a.html This patch should *not* break compatibility with older device trees which do not use the 'fsl,' prefix. The drivers will still bind against the older names also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* fec_mpc52xx: write in C...Al Viro2007-12-221-2/+3
| | | | | | | | | | If you need to find a difference between addresses of two struct members, subtract offsetof() or cast addresses to char * and subtract those if you prefer it that way. Doing that same with s/char */u32/, OTOH... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Fix memory corruption in fec_mpc52xxJon Smirl2007-12-041-2/+2
| | | | | | | | | | | The mpc5200 fec driver is corrupting memory. This patch fixes two bugs where the wrong skb was being referenced. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Acked-by: Domen Puncer <domen.puncer@telargo.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* SET_NETDEV_DEV() in fec_mpc52xx.cDavid Woodhouse2007-12-011-0/+2
| | | | | | | | This helps to allow the Fedora installer to use the built-in Ethernet on the Efika for a network install. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Fix region size check in mpc5200 FEC driverGrant Likely2007-11-011-2/+2
| | | | | | | | Driver shouldn't complain if the register range is larger than what it expects. This works around failures with some device trees. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* FEC - fast ethernet controller for mpc52xxDomen Puncer2007-10-291-0/+1112
Driver for ethernet on mpc5200/mpc5200b SoCs (FEC). Signed-off-by: Domen Puncer <domen.puncer@telargo.com> Acked-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
OpenPOWER on IntegriCloud