summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet
Commit message (Collapse)AuthorAgeFilesLines
* ixgbe: Do not pad FCoE frames as this can cause issues with FCoE DDPAlexander Duyck2012-06-263-7/+13
| | | | | | | | | | | | | | | | | | FCoE target mode was experiencing issues due to the fact that we were sending up data frames that were padded to 60 bytes after the DDP logic had already stripped the frame down to 52 or 56 depending on the use of VLANs. This was resulting in the FCoE DDP logic having issues since it thought the frame still had data in it due to the padding. To resolve this, adding code so that we do not pad FCoE frames prior to handling them to the stack. CC: <stable@vger.kernel.org> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4_en: Release QP range in free_resourcesYevgeny Petrilin2012-06-252-4/+9
| | | | | | | | | Add a missing resource release in ring cleanup. Not doing this leaves a range of QPs that are being reserved, and no one can use them. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4: Use single completion vector after NOP failureYevgeny Petrilin2012-06-251-0/+2
| | | | | | | | Fix a crash at the error flow of NOP command which caused the driver to try and use a completion vector which wasn't allocated. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4_en: Set correct port parameters during device initializationYevgeny Petrilin2012-06-251-2/+4
| | | | | | | | | | | Set valid port parameters: MTU and flow control configuration when configuring the port during HW device initialization, prior to the net device open() being called. Using invalid parameters (such as all zeros) could lead to bad firmware behavior. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sh_eth: fix the condition to fix the cur_tx/dirty_rxYoshihiro Shimoda2012-06-221-5/+7
| | | | | | | | | | | | | | | | The following commit couldn't work if the RMCR is not set to 1. "net: sh_eth: fix the rxdesc pointer when rx descriptor empty happens" commit id 79fba9f51755c704c0a7d7b7f0df10874dc0a744 If RMCR is not set, the controller will clear the EDRRR after it received a frame. In this case, the driver doesn't need to fix the value of cur_rx/dirty_rx. The driver only needs it when the controll detects receive descriptors are empty. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: RxConfig hack for the 8168evl.françois romieu2012-06-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | The 8168evl (RTL_GIGA_MAC_VER_34) based Gigabyte GA-990FXA motherboards are very prone to NETDEV watchdog problems without this change. See https://bugzilla.kernel.org/show_bug.cgi?id=42899 for instance. I don't know why it *works*. It's depressingly effective though. For the record: - the problem may go along IOMMU (AMD-Vi) errors but it really looks like a red herring. - the patch sets the RX_MULTI_EN bit. If the 8168c doc is any guide, the chipset now fetches several Rx descriptors at a time. - long ago the driver ignored the RX_MULTI_EN bit. e542a2269f232d61270ceddd42b73a4348dee2bb changed the RxConfig settings. Whatever the problem it's now labeled a regression. - Realtek's own driver can identify two different 8168evl devices (CFG_METHOD_16 and CFG_METHOD_17) where the r8169 driver only sees one. It sucks. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: Fix memory leak in ixgbe when receiving traffic on DDP enabled ringsAlexander Duyck2012-06-201-1/+1
| | | | | | | | | | | | This patch fixes a memory leak that was introduced in the 3.4 kernel. The leak occurred when FCoE was enabled and traffic was passed over the FCoE rings reserved for FCoE. The memory leak was due to us not populating the compound page information on the order 1 pages needed for FCoE. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* Kconfig: Fix Kconfig for Intel ixgbe and igb PTP support.Carolyn Wyborny2012-06-201-3/+7
| | | | | | | | | | Fix Kconfig file to make sure that PTP and IGB/IXGBE are both either in-kernel or modules, not mixed. Having the build status mixed causes compile errors. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* igb: Fix incorrect RAR address entries for i210/i211 device.Carolyn Wyborny2012-06-201-2/+0
| | | | | | | | | | | i210/i211 device has only 16 RAR address filters like 82575, instead of 32 like i350. This patch removes the entries for i210/i211 in the get_invariants function which was setting them for 32. This ensures that they will get the default value which is the correct one. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* be2net: Increase statistics structure size for skyhawk.Vasundhara Volam2012-06-171-1/+1
| | | | | | | Increasing the hardware statistics structure to accomodate statistics for skyhawk. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: Modify error message to incorporate subsystemVasundhara Volam2012-06-171-6/+6
| | | | | | | Modify IOCTL error message to print subsystem also. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: reduce gso_max_size setting to account for ethernet header.Sarveshwar Bandi2012-06-171-1/+1
| | | | | | | | The maximum size of packet that can be handled by controller including ethernet header is 65535. Reducing gso_max_size accordingly. Signed-off-by: Sarveshwar Bandi <sarveshwar.bandi@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: Fix PHC loophole allowing misconfiguration of increment registerJacob Keller2012-06-171-2/+11
| | | | | | | | | | | | | | | | | | | | | | | This patch fixes a potential hole when configuring the cycle counter used to generate the nanosecond time clock. This clock is based off of the SYSTIME registers along with the TIMINCA registers. The TIMINCA register determines the increment to be added to the SYSTIME registers every DMA clock tick. This register needs to be reconfigured whenever the link-speed changes. However, the value calculated stays the same when link is down and when link is up. Misconfiguration can occur if the link status changes due to a reset, which causes the TIMINCA register to be reset. This reset puts the device in an unstable state where the SYSTIME registers stop incrementing and the PTP protocol does not function. The solution is to double check the TIMINCA value and always reset the value if the register is zero. This prevents a misconfiguration bug that halts the PHC. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: fix link for BCM57711 with 84823 phyYuval Mintz2012-06-161-1/+1
| | | | | | | Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: fix I2C non-respondent issueYuval Mintz2012-06-161-23/+29
| | | | | | | | | | | When I2C is not responding it's usually due to a previous unexpected reset during I2C operation. We release it by powering down and up the SFP+ module. Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlcnic: off by one in qlcnic_init_pci_info()Dan Carpenter2012-06-151-1/+1
| | | | | | | | | | The adapter->npars[] array has QLCNIC_MAX_PCI_FUNC elements. We allocate it that way a few lines earlier in the function. So this test is off by one. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: fix panic when TX ring is fullEric Dumazet2012-06-151-5/+3
| | | | | | | | | | | | | | | | | | | | | | | There is a off by one error in the minimal number of BD in bnx2x_start_xmit() and bnx2x_tx_int() before stopping/resuming tx queue. A full size GSO packet, with data included in skb->head really needs (MAX_SKB_FRAGS + 4) BDs, because of bnx2x_tx_split() This error triggers if BQL is disabled and heavy TCP transmit traffic occurs. bnx2x_tx_split() definitely can be called, remove a wrong comment. Reported-by: Tomas Hruby <thruby@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Yaniv Rosner <yanivr@broadcom.com> Cc: Merav Sicron <meravs@broadcom.com> Cc: Tom Herbert <therbert@google.com> Cc: Robert Evans <evansr@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2012-06-1422-114/+2071
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David S. Miller: This has the fix for the wireless issues I ran into the other week as well as: 1) Fix CAN c_can driver transmit handling resulting in BUG check triggers, from AnilKumar Ch. 2) Fix packet drop monitor sleeping in atomic context, from Eric Dumazet. 3) Fix mv643xx_eth driver build regression, from Andrew Lunn. 4) Inetpeer freeing needs an RCU grace period in order to avoid races during tree invalidation. From Eric Dumazet. 5) Fix endianness bugs in xt_HMARK netfilter module, from Hans Schillstrom. 6) Add proper module refcounting to l2tp_eth to avoid crash on module unload, from Eric Dumazet. 7) Fix truncation of neighbour entry dumps due to logic errors in neigh_dump_info() and friends, from Eric Dumazet. 8) The conversion of fib6_age() to dst_neigh_lookup() accidently reversed the logic of a flags test, fix from Thomas Graf. 9) Fix checksum configuration in newer sky2 chips, from Stephen Hemminger. 10) Revert BQL support in NIU driver, doesn't work. 11) l2tp_ip_sendmsg() illegally uses a route without a proper reference. From Eric Dumazet. 12) be2net driver references an SKB after it's potentially been freed, also from Eric Dumazet. 13) Fix RCU stalls in dummy net driver init. Also from Eric Dumazet. 14) lpc_eth has several bugs in it's transmit engine leading to packet leaks and improper queue wakes, from Eric Dumazet. 15) Apply short DMA workaround to more tg3 chips, from Matt Carlson. 16) Add tilegx network driver. 17) Bonding queue mapping for a packet can get corrupted, fix from Eric Dumazet. 18) Fix bug in netpoll_send_udp() SKB management that can leave garbage in the payload in certain situations. From Eric Dumazet. 19) bnx2x driver interprets chip RX checksum offload incorrectly in encapsulation situations. Fix from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits) bnx2x: fix checksum validation netpoll: fix netpoll_send_udp() bugs bonding: Fix corrupted queue_mapping bonding:record primary when modify it via sysfs tilegx network driver: initial support tg3: Apply short DMA frag workaround to 5906 net: stmmac: Fix clock en-/disable calls lpc_eth: fix tx completion lpc_eth: add missing ndo_change_mtu() dummy: fix rcu_sched self-detected stalls net: Reorder initialization in ip_route_output to fix gcc warning virtio-net: fix a race on 32bit arches r8169: avoid NAPI scheduling delay. net: Make linux/tcp.h C++ friendly (trivial) netdev: fix drivers/net/phy/ kernel-doc warnings net/core: fix kernel-doc warnings be2net: fix a race in be_xmit() l2tp: fix a race in l2tp_ip_sendmsg() mac80211: add back channel change flag NFC: Fix possible NULL ptr deref when getting the name of a socket ...
| * bnx2x: fix checksum validationEric Dumazet2012-06-132-21/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | bnx2x driver incorrectly sets ip_summed to CHECKSUM_UNNECESSARY on encapsulated segments. TCP stack happily accepts frames with bad checksums, if they are inside a GRE or IPIP encapsulation. Our understanding is that if no IP or L4 csum validation was done by the hardware, we should leave ip_summed as is (CHECKSUM_NONE), since hardware doesn't provide CHECKSUM_COMPLETE support in its cqe. Then, if IP/L4 checksumming was done by the hardware, set CHECKSUM_UNNECESSARY if no error was flagged. Patch based on findings and analysis from Robert Evans Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Yaniv Rosner <yanivr@broadcom.com> Cc: Merav Sicron <meravs@broadcom.com> Cc: Tom Herbert <therbert@google.com> Cc: Robert Evans <evansr@google.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * tilegx network driver: initial supportChris Metcalf2012-06-113-2/+1902
| | | | | | | | | | | | | | | | | | This change adds support for the tilegx network driver based on the GXIO IORPC support in the tilegx software stack, using the on-chip mPIPE packet processing engine. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * tg3: Apply short DMA frag workaround to 5906Matt Carlson2012-06-111-1/+2
| | | | | | | | | | | | | | | | | | 5906 devices also need the short DMA fragment workaround. This patch makes the necessary change. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Tested-by: Christian Kujau <lists@nerdbynature.de> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: stmmac: Fix clock en-/disable callsStefan Roese2012-06-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | clk_{un}prepare is mandatory for platforms using common clock framework. Since these drivers are used by SPEAr platform, which supports common clock framework, add clk_{un}prepare() support for them. Otherwise the clocks are not correctly en-/disabled and ethernet support doesn't work. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * lpc_eth: fix tx completionEric Dumazet2012-06-111-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | __lpc_handle_xmit() has two bugs : 1) It can leak skbs in case TXSTATUS_ERROR is set 2) It can wake up txqueue while no slot was freed. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Roland Stigge <stigge@antcom.de> Tested-by: Roland Stigge <stigge@antcom.de> Cc: Kevin Wells <kevin.wells@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * lpc_eth: add missing ndo_change_mtu()Eric Dumazet2012-06-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | lpc_eth does a copy of transmitted skbs to DMA area, without checking skb lengths, so can trigger buffer overflows : memcpy(pldat->tx_buff_v + txidx * ENET_MAXF_SIZE, skb->data, len); One way to get bigger skbs is to allow MTU changes above the 1500 limit. Calling eth_change_mtu() in ndo_change_mtu() makes sure this cannot happen. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Roland Stigge <stigge@antcom.de> Cc: Kevin Wells <kevin.wells@nxp.com> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: David S. Miller <davem@davemloft.net>
| * r8169: avoid NAPI scheduling delay.françois romieu2012-06-101-5/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While reworking the r8169 driver a few months ago to perform the smallest amount of work in the irq handler, I took care of avoiding any irq mask register operation in the slow work dedicated user context thread. The slow work thread scheduled an extra round of NAPI work which would ultimately set the irq mask register as required, thus keeping such irq mask operations in the NAPI handler. It would eventually race with the irq handler and delay NAPI execution for - assuming no further irq - a whole ksoftirqd period. Mildly a problem for rare link changes or corner case PCI events. The race was always lost after the last bh disabling lock had been removed from the work thread and people started wondering where those pesky "NOHZ: local_softirq_pending 08" messages came from. Actually the irq mask register _can_ be set up directly in the slow work thread. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Reported-by: Dave Jones <davej@redhat.com> Tested-by: Marc Dionne <marc.c.dionne@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * be2net: fix a race in be_xmit()Eric Dumazet2012-06-081-2/+3
| | | | | | | | | | | | | | | | | | As soon as hardware is notified of a transmit, we no longer can assume skb can be dereferenced, as TX completion might have freed the packet. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Revert "niu: Add support for byte queue limits."David S. Miller2012-06-081-11/+1
| | | | | | | | | | | | | | | | | | | | | | This reverts commit efa230f2c68abab817f13473077f8d0cc74f43f3. BQL doesn't work with how this driver currently only takes TX interrupts every 1/4 of the TX ring. That behavior needs to be fixed, but that's a larger non-trivial task and for now we have to revert BQL support as this makes the device currently completely unusable. Signed-off-by: David S. Miller <davem@davemloft.net>
| * stmmac: fix driver built w/ w/o both pci and platf modulesGiuseppe CAVALLARO2012-06-073-12/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit ba27ec66ffeb78cbf fixes the Kconfig of the driver when built as module allowing to select/unselect the PCI and Platform modules that are not anymore mutually exclusive. This patch fixes and guarantees that the driver builds on all the platforms w/ w/o PCI and when select/unselect the two stmmac supports. In case of there are some problems on both the configuration and the pci/pltf registration the module_init will fail. v2: set the CONFIG_STMMAC_PLATFORM enabled by default. I've just noticed that this can actually help on some configurations that don't enable any STMMAC options by default (e.g. SPEAr). v3: change printk level when do not register the driver. Reported-by: Fengguang Wu <wfg@linux.intel.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * sky2: fix checksum bit management on some chipsstephen hemminger2012-06-071-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The newer flavors of Yukon II use a different method for receive checksum offload. This is indicated in the driver by the SKY2_HW_NEW_LE flag. On these newer chips, the BMU_ENA_RX_CHKSUM should not be set. The driver would get incorrectly toggle the bit, enabling the old checksum logic on these chips and cause a BUG_ON() assertion. If receive checksum was toggled via ethtool. Reported-by: Kirill Smelkov <kirr@mns.spb.ru> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * mv643xx_eth: Fix compile error for architectures without clk.Andrew Lunn2012-06-061-5/+10
| | | | | | | | | | | | | | | | | | | | | | Commit 452503ebc (ARM: Orion: Eth: Add clk/clkdev support.) broke the building of the driver on architectures which don't have clk support. In particular PPC32 Pegasos which uses this driver. Add #ifdef around the clk API usage. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
| * stmmac: fix driver Kconfig when built as moduleGiuseppe CAVALLARO2012-06-065-35/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patches fixes the driver when built as dynamic module. In fact, the platform part cannot be built and the probe fails (thanks to Bob Liu that reported this bug). v2: as D. Miller suggested, it is not necessary to make the pci and the platform code mutually exclusive. Having both could also help, at built time ,to verify that all the code is validated and compiles fine. v3: removed wrong Reviewed-by from the patch Reported-by: Bob Liu <lliubbo@gmail.com> cc: Rayagond Kokatanur <rayagond@vayavyalabs.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * stmmac: fix driver's doc when run kernel-doc scriptGiuseppe CAVALLARO2012-06-061-2/+5
| | | | | | | | | | Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ixgbe: IXGBE_RXD_STAT_VP set even with Rx stripping enabledJohn Fastabend2012-06-051-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The hardware bit IXGBE_RXD_STAT_VP appears to be set even when Rx stripping is disabled. This results in passing frames up the stack which do not have the 802.1Q tag stripped but have the tci bits set as if it was. Working around this with a check for the feature flag bit. I would welcome any better ideas or a pointer to exactly which bits in the hardware register need to be cleared to get the IXGBE_RXD_STAT_VP bit to be set per data sheet. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * ixgbe: fix_features rxvlan is independent of DCB and needs to be setJohn Fastabend2012-06-051-10/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | DCB can be used independent of if RX VLAN stripping is enabled or disabled so remove erroneous check. Also enable or disable VLAN stripping when features are applied so hardware and feature flags are in sync. CC: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * e1000e: test for valid check_reset_block function pointerBruce Allan2012-06-054-8/+12
| | | | | | | | | | | | | | | | | | | | | | | | commit 44abd5c12767a8c567dc4e45fd9aec3b13ca85e0 introduced NULL pointer dereferences when attempting to access the check_reset_block function pointer on 8257x and 80003es2lan non-copper devices. This fix should be applied back through 3.4. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | Merge tag 'rdma-fixes' of ↵Linus Torvalds2012-06-061-2/+2
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull InfiniBand/RDMA fixes from Roland Dreier: "All in hardware drivers: - Fix crash in cxgb4 - Fixes to new ocrdma driver - Regression fixes for mlx4" * tag 'rdma-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mlx4: Fix max_wqe capacity reported from query device mlx4_core: Fix setting VL_cap in mlx4_SET_PORT wrapper flow IB/mlx4: Fix EQ deallocation in legacy mode RDMA/cxgb4: Fix crash when peer address is 0.0.0.0 RDMA/ocrdma: Remove unnecessary version.h includes RDMA/ocrdma: Fix signaled event for SRQ_LIMIT_REACHED RDMA/ocrdma: Correct queue free count math
| * mlx4_core: Fix setting VL_cap in mlx4_SET_PORT wrapper flowJack Morgenstein2012-06-061-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 096335b3f983 ("mlx4_core: Allow dynamic MTU configuration for IB ports") modifies the port VL setting. This exposes a bug in mlx4_common_set_port(), where the VL cap value passed in (inside the command mailbox) is incorrectly zeroed-out: mlx4_SET_PORT modifies the VL_cap field (byte 3 of the mailbox). Since the SET_PORT command is paravirtualized on the master as well as on the slaves, mlx4_SET_PORT_wrapper() is invoked on the master. This calls mlx4_common_set_port() where mailbox byte 3 gets overwritten by code which should only set a single bit in that byte (for the reset qkey counter flag) -- but instead overwrites the entire byte. The result is that when running in SR-IOV mode, the VL_cap will be set to zero -- fix this. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
* | fec_mpc52xx: fix timestamp filteringStephan Gatzka2012-06-021-1/+1
| | | | | | | | | | | | | | | | | | | | skb_defer_rx_timestamp was called with a freshly allocated skb but must be called with rskb instead. Signed-off-by: Stephan Gatzka <stephan@gatzka.org> Cc: stable <stable@vger.kernel.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | e1000e: fix Rapid Start Technology support for i217Bruce Allan2012-06-021-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | The definition of I217_PROXY_CTRL must use the BM_PHY_REG() macro instead of the PHY_REG() macro for PHY page 800 register 70 since it is for a PHY register greater than the maximum allowed by the latter macro, and fix a typo setting the I217_MEMPWR register in e1000_suspend_workarounds_ich8lan. Also for clarity, rename a few defines as bit definitions instead of masks. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | e1000: look into the page instead of skb->data for e1000_tbi_adjust_stats()Sebastian Andrzej Siewior2012-06-021-1/+1
| | | | | | | | | | | | | | | | | | This is another fixup where the data is not transfered into buffer addressed by skb->data but into a page. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | r8169: call netif_napi_del at errpaths and at driver unloadDevendra Naga2012-06-011-0/+3
| | | | | | | | | | | | | | | | | | when register_netdev fails, the init'ed NAPIs by netif_napi_add must be deleted with netif_napi_del, and also when driver unloads, it should delete the NAPI before unregistering netdevice using unregister_netdev. Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | 8139cp/8139too: terminate the eeprom access with the right opmodeJason Wang2012-06-012-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, we terminate the eeprom access through clearing the CS by: RTL_W8 (Cfg9346, ~EE_CS); or writeb (~EE_CS, ee_addr); This would left the eeprom into "Config. Register Write Enable:" state which is not expcted as the highest two bits were set to 0x11 ( expected is the "Normal" mode (0x00)). Solving this by write 0x0 instead of ~EE_CS when terminating the eeprom access. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | 8139cp: set ring address before enabling receiverJason Wang2012-06-011-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | Currently, we enable the receiver before setting the ring address which could lead the card DMA into unexpected areas. Solving this by set the ring address before enabling the receiver. btw. I find and test this in qemu as I didn't have a 8139cp card in hand. please review it carefully. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx4_core: Fix obscure mlx4_cmd_box parameter in QUERY_DEV_CAPJack Morgenstein2012-05-311-3/+2
| | | | | | | | | | | | | | | | | | The "!mlx4_is_slave" is totally confusing. Fix with constant MLX4_CMD_NATIVE, which is the intended behavior. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx4_core: Check port out-of-range before using in mlx4_slave_capJack Morgenstein2012-05-311-3/+3
| | | | | | | | | | | | | | | | | | | | The range check was performed after using the port number. Reverse this to prevent a potential array overflow. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx4_core: Fixes for VF / Guest startup flowJack Morgenstein2012-05-314-14/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - pass the following parameters: - firmware version (added QUERY_FW paravirtualization for that) - disable Blueflame on slaves. KVM disables write combining on guests, and we get better performance without BF in this case. (This requires QUERY_DEV_CAP paravirtualization, also in this commit) - max qp rdma as destination - get rid of a chunk of "if (0)" dead code Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx4_en: Fix improper use of "port" parameter in mlx4_en_eventJack Morgenstein2012-05-311-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Port is used as an array index before we know if that is proper. For example, in the catas event case, port is zero; however, the port index should lie in the range (1..2). Fix this by using 'port' only in the events where it is of interest. Test for port out of range in the default (unhandled event) case, and do not output a message if it is not an ethernet port. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx4_core: Fix number of EQs used in ICM initialisationMarcel Apfelbaum2012-05-312-15/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In SRIOV mode, the number of EQs used when computing the total ICM size was incorrect. To fix this, we do the following: 1. We add a new structure to mlx4_dev, mlx4_phys_caps, to contain physical HCA capabilities. The PPF uses the phys capabilities when it computes things like ICM size. The dev_caps structure will then contain the paravirtualized values, making bookkeeping much easier in SRIOV mode. We add a structure rather than a single parameter because there will be other fields in the phys_caps. The first field we add to the mlx4_phys_caps structure is num_phys_eqs. 2. In INIT_HCA, when running in SRIOV mode, the "log_num_eqs" parameter passed to the FW is the number of EQs per VF/PF; each function (PF or VF) has this number of EQs available. However, the total number of EQs which must be allowed for in the ICM is (1 << log_num_eqs) * (#VFs + #PFs). Rather than compute this quantity, we allocate ICM space for 1024 EQs (which is the device maximum number of EQs, and which is the value we place in the mlx4_phys_caps structure). For INIT_HCA, however, we use the per-function number of EQs as described above. Signed-off-by: Marcel Apfelbaum <marcela@dev.mellanox.co.il> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx4_core: Fix the slave_id out-of-range test in mlx4_eq_intJack Morgenstein2012-05-311-1/+1
| | | | | | | | | | | | | | | | Ths fixes the comparison in the FLR (Function Level Reset) event case. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2012-05-313-10/+20
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking changes from David S. Miller: 1) Fix IPSEC header length calculation for transport mode in ESP. The issue is whether to do the calculation before or after alignment. Fix from Benjamin Poirier. 2) Fix regression in IPV6 IPSEC fragment length calculations, from Gao Feng. This is another transport vs tunnel mode issue. 3) Handle AF_UNSPEC connect()s properly in L2TP to avoid OOPSes. Fix from James Chapman. 4) Fix USB ASIX driver's reception of full sized VLAN packets, from Eric Dumazet. 5) Allow drop monitor (and, more generically, all generic netlink protocols) to be automatically loaded as a module. From Neil Horman. Fix up trivial conflict in Documentation/feature-removal-schedule.txt due to new entries added next to each other at the end. As usual. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits) net/smsc911x: Repair broken failure paths virtio-net: remove useless disable on freeze netdevice: Update netif_dbg for CONFIG_DYNAMIC_DEBUG drop_monitor: Add module alias to enable automatic module loading genetlink: Build a generic netlink family module alias net: add MODULE_ALIAS_NET_PF_PROTO_NAME r6040: Do a Proper deinit at errorpath and also when driver unloads (calling r6040_remove_one) r6040: disable pci device if the subsequent calls (after pci_enable_device) fails skb: avoid unnecessary reallocations in __skb_cow net: sh_eth: fix the rxdesc pointer when rx descriptor empty happens asix: allow full size 8021Q frames to be received rds_rdma: don't assume infiniband device is PCI l2tp: fix oops in L2TP IP sockets for connect() AF_UNSPEC case mac80211: fix ADDBA declined after suspend with wowlan wlcore: fix undefined symbols when CONFIG_PM is not defined mac80211: fix flag check for QoS NOACK frames ath9k_hw: apply internal regulator settings on AR933x ath9k_hw: update AR933x initvals to fix issues with high power devices ath9k: fix a use-after-free-bug when ath_tx_setup_buffer() fails ath9k: stop rx dma before stopping tx ...
OpenPOWER on IntegriCloud