summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/realtek
Commit message (Collapse)AuthorAgeFilesLines
* r8169: enable transmit time stamping.Richard Cochran2012-03-111-0/+2
| | | | | | | | | | | This patch has been tested on a machine with the Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05). Cc: Realtek linux nic maintainers <nic_swsd@realtek.com> Cc: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: stop using net_device.{base_addr, irq}.Francois Romieu2012-03-101-7/+5
| | | | | | | The driver does not need this leftover of the ISA drivers era. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
* r8169: move rtl_cfg_info closer to its caller.Francois Romieu2012-03-101-61/+57
| | | | | Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
* r8169: move the netpoll handler after the irq handler.Francois Romieu2012-03-101-11/+9
| | | | | Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
* r8169: move rtl8169_open after rtl_task it depends on.Francois Romieu2012-03-101-87/+81
| | | | | Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
* r8169: move rtl_set_rx_mode before its rtl_hw_start callers.Francois Romieu2012-03-101-51/+50
| | | | | Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
* r8169: move net_device_ops beyond the methods it references.Francois Romieu2012-03-101-29/+20
| | | | | Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
* r8169: move the driver probe method to the end of the driver file.Francois Romieu2012-03-101-246/+246
| | | | | Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
* r8169: move the driver removal method to the end of the driver file.Francois Romieu2012-03-101-29/+29
| | | | | Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2012-03-091-0/+5
|\
| * r8169: runtime resume before shutdown.françois romieu2012-03-061-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With runtime PM, if the ethernet cable is disconnected, the device is transitioned to D3 state to conserve energy. If the system is shutdown in this state, any register accesses in rtl_shutdown are dropped on the floor. As the device was programmed by .runtime_suspend() to wake on link changes, it is thus brought back up as soon as the link recovers. Resuming every suspended device through the driver core would slow things down and it is not clear how many devices really need it now. Original report and D0 transition patch by Sameer Nanda. Patch has been changed to comply with advices by Rafael J. Wysocki and the PM folks. Reported-by: Sameer Nanda <snanda@chromium.org> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Hayes Wang <hayeswang@realtek.com> Cc: Alan Stern <stern@rowland.harvard.edu> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
* | 8139too: Add 64bit statisticsJunchang Wang2012-03-061-8/+38
| | | | | | | | | | | | | | | | Switch to use ndo_get_stats64 to get 64bit statistics. Two sync entries are used (one for Rx and one for Tx). Signed-off-by: Junchang Wang <junchangwang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2012-03-051-0/+8
|\ \ | |/ | | | | | | | | | | | | | | Conflicts: drivers/net/vmxnet3/vmxnet3_drv.c Small vmxnet3 conflict with header size bug fix in 'net'. Signed-off-by: David S. Miller <davem@davemloft.net>
| * r8169: corrupted IP fragments fix for large mtu.françois romieu2012-03-021-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | Noticed with the 8168d (-vb-gr, aka RTL_GIGA_MAC_VER_26). ConfigX registers should only be written while the Config9346 lock is held. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Reported-by: Nick Bowler <nbowler@elliptictech.com> Cc: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r8169: add byte queue limit support.Igor Maravic2012-03-061-5/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Nothing fancy: - sent bytes count is notified in the start_xmit path right before updating the owner bit in the hardware Tx descriptor (E. Dumazet) - avoid useless tp->dev dereferencing in start_xmit (E. Dumazet) Use of netdev_reset_queue is favored over proper accounting in rtl8169_tx_clear_range since the latter would need more work for the same result (nb: said accounting degenerates to nothing in xmit_frags). Signed-off-by: Igor Maravic <igorm@etf.rs> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
* | r8169: add 64bit statistics.Junchang Wang2012-03-061-14/+45
| | | | | | | | | | | | | | | | | | Switch to use ndo_get_stats64 to get 64bit statistics. Two sync entries are used (one for Rx and one for Tx). Signed-off-by: Junchang Wang <junchangwang@gmail.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
* | r8169: Support RX-FCS flag.Ben Greear2012-02-241-1/+5
| | | | | | | | | | | | | | | | This allows the NIC to receive the Ethernet FCS and pass it up the stack, allowing sniffers and other interested programs to inspect the FCS. Signed-off-by: Ben Greear <greearb@candelatech.com>
* | r8169: Support RX-ALL flag.Ben Greear2012-02-241-13/+38
| | | | | | | | | | | | | | | | | | | | | | | | This allows the NIC to receive packets with bad FCS and Runts, which can help when sniffing. NOTE: r8169, at least on my NIC, silently drops packets with bad FCS instead of counting them. It seems they are only received in any fashion if the RxCRC flag is set (which this patch allows). Signed-off-by: Ben Greear <greearb@candelatech.com>
* | 8139too: Support RX-FCS flag.Ben Greear2012-02-241-1/+5
| | | | | | | | | | | | | | This allows the NIC to pass the Ethernet FCS on up the stack, and is useful when sniffing networks. Signed-off-by: Ben Greear <greearb@candelatech.com>
* | 8139too: Support RX-ALL logic.Ben Greear2012-02-241-0/+52
| | | | | | | | | | | | | | | | | | This allows the NIC to receive Runts and frames with bad Ethernet Frame Checksums (FCS). Useful to sniffing & diagnosing bad networks. Signed-off-by: Ben Greear <greearb@candelatech.com>
* | netdev: ethernet dev_alloc_skb to netdev_alloc_skbPradeep A. Dalvi2012-02-081-1/+1
| | | | | | | | | | | | | | | | Replaced deprecating dev_alloc_skb with netdev_alloc_skb in drivers/net/ethernet - Removed extra skb->dev = dev after netdev_alloc_skb Signed-off-by: Pradeep A Dalvi <netdev@pradeepdalvi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | drivers/net: Remove alloc_etherdev error messagesJoe Perches2012-01-312-5/+2
| | | | | | | | | | | | | | | | alloc_etherdev has a generic OOM/unable to alloc message. Remove the duplicative messages after alloc_etherdev calls. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r8169: spinlock redux.Francois Romieu2012-01-311-8/+0
| | | | | | | | | | | | | | | | rtl8169_get_regs operates under RTNL and rtl task mutex whereas rtl_set_rx_mode is either called under RTNL or rtl task mutex protection. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
* | r8169: avoid a useless work scheduling.Francois Romieu2012-01-311-1/+3
| | | | | | | | | | | | Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Suggested-by: Michał Mirosław <mirqus@gmail.com> Cc: Hayes Wang <hayeswang@realtek.com>
* | r8169: move task enable boolean to bitfield.Francois Romieu2012-01-311-6/+7
| | | | | | | | | | | | | | | | Simpler, more consistent, with negligible cost in non-critical paths. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Suggested-by: Michał Mirosław <mirqus@gmail.com> Cc: Hayes Wang <hayeswang@realtek.com>
* | r8169: bh locking redux and task scheduling.Francois Romieu2012-01-311-16/+4
| | | | | | | | | | | | | | | | | | | | | | - atomic bit operations are globally visible - pending status is always cleared before execution - scheduled works are either idempotent or only required to happen once after a series of originating events, say link events for instance Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Suggested-by: Michał Mirosław <mirqus@gmail.com> Cc: Hayes Wang <hayeswang@realtek.com>
* | r8169: fix early queue wake-up.Francois Romieu2012-01-311-0/+18
| | | | | | | | | | | | | | | | | | With infinite gratitude to Eric Dumazet for allowing me to identify the error. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Hayes Wang <hayeswang@realtek.com>
* | drivers/net: fix up stale paths from driver reorgPaul Gortmaker2012-01-301-5/+5
| | | | | | | | | | | | | | | | | | | | | | The reorganization of the driver layout in drivers/net left behind some stale paths in comments and in Kconfig help text. Bring them up to date. No actual change to any code takes place here. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r8169: remove work from irq handler.Francois Romieu2012-01-271-218/+231
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The irq handler was a mess. See 7ab87ff4c770eed71e3777936299292739fcd0fe ("via-rhine: move work from irq handler to softirq and beyond") for similar changes. One can notice: - all non-napi tasks are explicitely scheduled trough a single work queue. - hiding software tx queue start behind the rtl_hw_start method is mildly natural. Move it in the caller where needed. - as can be seen from the heavy use of bh disabling locks, the driver is not safe for irq context messages with netconsole. It is still quite usable for general messaging though. Tested ok with concurrent registers dump (ethtool -d) + background traffic + "echo t > /proc/sysrq-trigger". Tested with old PCI chipset, PCIe 8168 and 810x: - XID 0c900800 RTL8168evl/8111evl - XID 18000000 RTL8168b/8111b - XID 98000000 RTL8169sc/8110sc - XID 083000c0 RTL8168d/8111d - XID 081000c0 RTL8168d/8111d - XID 00b00000 RTL8105e - XID 04a00000 RTL8102e As a side note, the comments in f11a377b3f4e897d11f0e8d1fc688667e2f19708 ("r8169: avoid losing MSI interrupts") does not seem completely clear: if I hack the driver further to stop acking the irq link event bit, MSI interrupts keep being delivered (RTL8168b/8111b, XID 18000000). Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
* | r8169: missing barriers.Francois Romieu2012-01-271-3/+2
| | | | | | | | | | Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
* | r8169: irq mask helpers.Francois Romieu2012-01-271-7/+30
| | | | | | | | | | Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
* | r8169: factor out IntrMask writes.Francois Romieu2012-01-271-7/+9
| | | | | | | | | | Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
* | r8169: stop delaying workqueue.Francois Romieu2012-01-271-13/+24
| | | | | | | | | | | | | | | | | | Though motivated by the move of the driver to a single work queue of sequential events and removal of hard irq processing, it looks safe as a standalone change. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
* | r8169: remove rtl8169_reinit_task.Francois Romieu2012-01-271-31/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I see no good reason to keep both rtl8169_reinit_task and rtl8169_reset_task: - rtl8169_reinit_task adds a software failure point which does relate to any hardware state - they handle hardware the same. Remember that rtl8169_reinit_task was introduced in the 8169 only era to handle PCI errors way before the 8168 asked for pll and firmware ops and compare : rtl8169_reinit_task | rtl8169_reset_task ----------------------------+-------------------------- rtl8169_wait_for_quiescence | rtl8169_hw_reset rtl8169_update_counters | rtl8169_wait_for_quiescence rtl8169_hw_reset | rtl_hw_start rtl8169_rx_missed | rtl8169_check_link_status rtl_pll_power_down | rtl_request_firmware | rtl8169_init_phy | rtl_pll_power_up | rtl_hw_start | rtl8169_check_link_status | Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
* | r8169: remove hardcoded PCIe registers accesses.Francois Romieu2012-01-271-4/+2
|/ | | | Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
* 8139cp: fix missing napi_gro_flush.françois romieu2012-01-081-0/+1
| | | | | | | | | The driver uses __napi_complete and napi_gro_receive. Without it, the driver hits the BUG_ON(n->gro_list) assertion hard in __napi_complete. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Marin Glibic <zhilla2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* 8139cp: properly config rx mode after resumingJason Wang2012-01-031-6/+3
| | | | | | | | | | | | | | Rx mode should be reset after resming, so unconditionally updating rx mode rather than conditionally updating based on the value we remembered, otherwise unexpected value may be used by the nic after resuming. btw. I find and test this when debugging guest hibernation in qemu, as I did not have a 8139cp card in hand, this patch is untested in a physical 8139cp card, plase review it carefully. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* 8139cp/8139too: do not read into reserved registersJason Wang2012-01-032-2/+2
| | | | | | | | delay_eeprom() use long read for Cfg9346 register(offset 0x50) which may read into the area of reserved register(offset 0x53). Use byte read instead. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2011-12-231-6/+8
|\ | | | | | | | | | | | | | | | | | | Conflicts: net/bluetooth/l2cap_core.c Just two overlapping changes, one added an initialization of a local variable, and another change added a new local variable. Signed-off-by: David S. Miller <davem@davemloft.net>
| * r8169: fix Config2 MSIEnable bit setting.françois romieu2011-12-191-6/+8
| | | | | | | | | | | | | | | | | | | | | | The MSIEnable bit is only available for the 8169. Avoid Config2 writes for the post-8169 8168 and 810x. Reported-by: Su Kang Yin <cantona@cantona.net> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2011-12-061-33/+20
|\ \ | |/
| * r8169: fix Rx index race between FIFO overflow recovery and NAPI handler.françois romieu2011-12-051-8/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since 92fc43b4159b518f5baae57301f26d770b0834c9, rtl8169_tx_timeout ends up resetting Rx and Tx indexes and thus racing with the NAPI handler via -> rtl8169_hw_reset -> rtl_hw_reset -> rtl8169_init_ring_indexes What about returning to the original state ? rtl_hw_reset is only used by rtl8169_hw_reset and rtl8169_init_one. The latter does not need rtl8169_init_ring_indexes because the indexes still contain their original values from the newly allocated network device private data area (i.e. 0). rtl8169_hw_reset is used by: 1. rtl8169_down Helper for rtl8169_close. rtl8169_open explicitely inits the indexes anyway. 2. rtl8169_pcierr_interrupt Indexes are set by rtl8169_reinit_task. 3. rtl8169_interrupt rtl8169_hw_reset is needed when the device goes down. See 1. 4. rtl_shutdown System shutdown handler. Indexes are irrelevant. 5. rtl8169_reset_task Indexes must be set before rtl_hw_start is called. 6. rtl8169_tx_timeout Indexes should not be set. This is the job of rtl8169_reset_task anyway. The removal of rtl8169_hw_reset in rtl8169_tx_timeout and its move in rtl8169_reset_task do not change the analysis. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: hayeswang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * r8169: Rx FIFO overflow fixes.françois romieu2011-12-051-25/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Realtek has specified that the post 8168c gigabit chips and the post 8105e fast ethernet chips recover automatically from a Rx FIFO overflow. The driver does not need to clear the RxFIFOOver bit of IntrStatus and it should rather avoid messing it. The implementation deserves some explanation: 1. events outside of the intr_event bit mask are now ignored. It enforces a no-processing policy for the events that either should not be there or should be ignored. 2. RxFIFOOver was already ignored in rtl_cfg_infos[RTL_CFG_1] for the whole 8168 line of chips with two exceptions: - RTL_GIGA_MAC_VER_22 since b5ba6d12bdac21bc0620a5089e0f24e362645efd ("use RxFIFO overflow workaround for 8168c chipset."). This one should now be correctly handled. - RTL_GIGA_MAC_VER_11 (8168b) which requires a different Rx FIFO overflow processing. Though it does not conform to Realtek suggestion above, the updated driver includes no change for RTL_GIGA_MAC_VER_12 and RTL_GIGA_MAC_VER_17. Both are 8168b. RTL_GIGA_MAC_VER_12 is common and a bit old so I'd rather wait for experimental evidence that the change suggested by Realtek really helps or does not hurt in unexpected ways. Removed case statements in rtl8169_interrupt are only 8168 relevant. 3. RxFIFOOver is masked for post 8105e 810x chips, namely the sole 8105e (RTL_GIGA_MAC_VER_30) itself. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: hayeswang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | corral some wayward N/A fw_version dust bunniesRick Jones2011-11-291-2/+3
| | | | | | | | | | | | | | | | Round-up some wayward "N/A" fw_version dust bunnies as part of that clean-up. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ethernet: Convert MAC_ADDR_LEN uses to ETH_ALENJoe Perches2011-11-161-4/+1
| | | | | | | | | | | | | | Reduce the number of #defines, use the normal #define from if_ether.h Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: introduce and use netdev_features_t for device features setsMichał Mirosław2011-11-162-3/+5
| | | | | | | | | | | | | | | | | | | | v2: add couple missing conversions in drivers split unexporting netdev_fix_features() implemented %pNF convert sock::sk_route_(no?)caps Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sweep the floors and convert some .get_drvinfo routines to strlcpyRick Jones2011-11-083-11/+11
|/ | | | | | | | | | Per the mention made by Ben Hutchings that strlcpy is now the preferred string copy routine for a .get_drvinfo routine, do a bit of floor sweeping and convert some of the as-yet unconverted ethernet drivers to it. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: increase the delay parameter of pm_schedule_suspendhayeswang2011-11-081-1/+1
| | | | | | | | | | | | The link down would occur when reseting PHY. And it would take about 2 ~ 5 seconds from link down to link up. If the delay of pm_schedule_suspend is not long enough, the device would enter runtime_suspend before link up. After link up, the device would wake up and reset PHY again. Then, you would find the driver keep in a loop of runtime_suspend and rumtime_resume. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/ethernet: sc92031 is not RealtekCesar Eduardo Barros2011-11-013-1622/+0
| | | | | | | | | | While the SC92031 could be found on fake "Realtek" NICs, it has no relationship to Realtek, and is actually from Silan. Create a new subdirectory for silan and move sc92031 there. Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller2011-10-241-33/+57
|
OpenPOWER on IntegriCloud