summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/broadcom/Kconfig
Commit message (Collapse)AuthorAgeFilesLines
* bgmac: driver for GBit MAC core on BCMA busRafał Miłecki2013-01-091-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | BCMA is a Broadcom specific bus with devices AKA cores. All recent BCMA based SoCs have gigabit ethernet provided by the GBit MAC core. This patch adds driver for such a cores registering itself as a netdev. It has been tested on a BCM4706 and BCM4718 chipsets. In the kernel tree there is already b44 driver which has some common things with bgmac, however there are many differences that has led to the decision or writing a new driver: 1) GBit MAC cores appear on BCMA bus (not SSB as in case of b44) 2) There is 64bit DMA engine which differs from 32bit one 3) There is no CAM (Content Addressable Memory) in GBit MAC 4) We have 4 TX queues on GBit MAC devices (instead of 1) 5) Many registers have different addresses/values 6) RX header flags are also different The driver in it's state is functional how, however there is of course place for improvements: 1) Supporting more net_device_ops 2) SUpporting more ethtool_ops 3) Unaligned addressing in DMA 4) Writing separated PHY driver Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Segregate SR-IOV codeAriel Elior2013-01-071-0/+9
| | | | | | | | | | | | In this patch the SR-IOV code is segregated from the main bulk of the bnx2x code. The CONFIG_BNX2X_SRIOV define is added to Broadcom's Kconfig, and allows the elision of the building of all the SR-IOV support code in the driver. The define is dependant on the kernel CONFIG_PCI_IOV configuration define. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tg3: PTP - Add header definitions, initialization and hw access functions.Matt Carlson2012-12-041-0/+1
| | | | | | | | | | This patch adds code to write the reference clock. If a chip reset is performed, the hwclock is reinitialized with the adjusted kernel time Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tg3: unconditionally select HWMON support when tg3 is enabled.Paul Gortmaker2012-10-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | There is the seldom used corner case where HWMON=m at the same time as TIGON3=y (typically randconfigs) which will cause a link fail like: drivers/built-in.o: In function `tg3_close': tg3.c:(.text+0x16bd86): undefined reference to `hwmon_device_unregister' drivers/built-in.o: In function `tg3_hwmon_open': tg3.c:(.text+0x16fc4b): undefined reference to `hwmon_device_register' make[1]: *** [vmlinux] Error 1 Fix it as suggested by DaveM[1] by having the Kconfig logic simply select HWMON when TIGON3 is selected. This gets rid of all the extra IS_ENABLED ifdeffery in tg3.c as a side benefit. [1] http://marc.info/?l=linux-netdev&m=134250573718151&w=2 Cc: Michael Chan <mchan@broadcom.com> Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reported-by: Anisse Astier <anisse@astier.eu> Suggested-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* MII: fix Kconfig dependencies for MIIJeff Kirsher2011-09-151-0/+2
| | | | | | | | | | | | | | | | MII Kconfig option is apart of the core networking drivers and by default NET_CORE is enabled so drivers selecting MII will have MII enabled as well. It was found using the randconfig option during testing, MII would be selected but NET_CORE could be disabled. This caused a dependency error. Resolved the dependency by selecting NET_CORE when MII is selected. Reported-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/ethernet/*: Enabled vendor Kconfig optionsJeff Kirsher2011-08-271-0/+1
| | | | | | | | | | | | | | Based on finds for Stephen Rothwell, where current defconfig's enable a ethernet driver and it is not compiled due to the newly added NET_VENDOR_* component of Kconfig. This patch enables all the "new" Kconfig options so that current defconfig's will continue to compile the expected drivers. In addition, by enabling all the new Kconfig options does not add any un-expected options. CC: Stephen Rothwll <sfc@canb.auug.org.au> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* broadcom: Move the Broadcom driversJeff Kirsher2011-08-101-0/+119
Moves the drivers for Broadcom devices into drivers/net/ethernet/broadcom/ and the necessary Kconfig and Makefile changes. CC: Eilon Greenstein <eilong@broadcom.com> CC: Michael Chan <mchan@broadcom.com> CC: Matt Carlson <mcarlson@broadcom.com> CC: Gary Zambrano <zambrano@broadcom.com> CC: "Maciej W. Rozycki" <macro@linux-mips.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
OpenPOWER on IntegriCloud