summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/arc
Commit message (Collapse)AuthorAgeFilesLines
* arc_emac: Remove unused pointer to net_device from arc_emac_privTobias Klauser2014-07-092-3/+0
| | | | | | | | The pointer to the struct net_device in the private data is only assigned but never used, so delete it. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* arc_emac: Use net_device_stats from struct net_deviceTobias Klauser2014-07-092-7/+5
| | | | | | | | Instead of using a private copy of struct net_device_stats in struct arc_emac_priv, use stats from struct net_device. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* arc_emac: add netpoll supportBeniamino Galvani2014-05-131-0/+12
| | | | | Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* arc_emac: implement promiscuous mode and multicast filteringBeniamino Galvani2014-05-131-0/+37
| | | | | | | | | This patch implements the set_rx_mode function to enable/disable promiscuous or all-multicast modes and to update the multicast filtering list of the device. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* arc_emac: add clock handlingHeiko Stübner2014-04-272-11/+37
| | | | | | | | | | This adds ability for the arc_emac to really handle its supplying clock. To get the needed clock-frequency either a real clock or the previous clock-frequency property must be provided. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Max Schwarz <max.schwarz@online.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* arc_emac: fix probe error pathHeiko Stübner2014-04-271-9/+14
| | | | | | | | The probe function at the moment only frees the netdev but does not disconnect the phy or removes the mdio bus it registered. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* arc_emac: write initial MAC address from devicetree to hwMax Schwarz2014-04-221-7/+14
| | | | | | | | | | | | | The MAC address retrieved from dt was not actually written to the hardware. This meant proper communication was only possible after changing the MAC address. Fix that by always writing the mac address during probing. Signed-off-by: Max Schwarz <max.schwarz@online.de> Acked-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-01-061-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c net/ipv6/ip6_tunnel.c net/ipv6/ip6_vti.c ipv6 tunnel statistic bug fixes conflicting with consolidation into generic sw per-cpu net stats. qlogic conflict between queue counting bug fix and the addition of multiple MAC address support. Signed-off-by: David S. Miller <davem@davemloft.net>
| * arc_emac: fix potential use after freeEric Dumazet2013-12-271-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Eric Dumazet <edumazet@google.com> skb_tx_timestamp(skb) should be called _before_ TX completion has a chance to trigger, otherwise it is too late and we access freed memory. Fixes: e4f2379db6c6 ("ethernet/arc/arc_emac - Add new driver") From: Eric Dumazet <edumazet@google.com> Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | arc_emac: remove custom "max-speed" parsing codeFlorian Fainelli2013-12-062-21/+1
|/ | | | | | | | | | | | | The ARC emac driver was the only in-tree to parse a PHY device 'max-speed' property but yet failed to do it correctly because 'max-speed' is supposed to set a PHY device supported features, not the advertising features as it was done. Now that of_mdiobus_register() takes care of doing that, remove the custom 'max-speed' parsing code. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2013-11-131-3/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: 1) The addition of nftables. No longer will we need protocol aware firewall filtering modules, it can all live in userspace. At the core of nftables is a, for lack of a better term, virtual machine that executes byte codes to inspect packet or metadata (arriving interface index, etc.) and make verdict decisions. Besides support for loading packet contents and comparing them, the interpreter supports lookups in various datastructures as fundamental operations. For example sets are supports, and therefore one could create a set of whitelist IP address entries which have ACCEPT verdicts attached to them, and use the appropriate byte codes to do such lookups. Since the interpreted code is composed in userspace, userspace can do things like optimize things before giving it to the kernel. Another major improvement is the capability of atomically updating portions of the ruleset. In the existing netfilter implementation, one has to update the entire rule set in order to make a change and this is very expensive. Userspace tools exist to create nftables rules using existing netfilter rule sets, but both kernel implementations will need to co-exist for quite some time as we transition from the old to the new stuff. Kudos to Patrick McHardy, Pablo Neira Ayuso, and others who have worked so hard on this. 2) Daniel Borkmann and Hannes Frederic Sowa made several improvements to our pseudo-random number generator, mostly used for things like UDP port randomization and netfitler, amongst other things. In particular the taus88 generater is updated to taus113, and test cases are added. 3) Support 64-bit rates in HTB and TBF schedulers, from Eric Dumazet and Yang Yingliang. 4) Add support for new 577xx tigon3 chips to tg3 driver, from Nithin Sujir. 5) Fix two fatal flaws in TCP dynamic right sizing, from Eric Dumazet, Neal Cardwell, and Yuchung Cheng. 6) Allow IP_TOS and IP_TTL to be specified in sendmsg() ancillary control message data, much like other socket option attributes. From Francesco Fusco. 7) Allow applications to specify a cap on the rate computed automatically by the kernel for pacing flows, via a new SO_MAX_PACING_RATE socket option. From Eric Dumazet. 8) Make the initial autotuned send buffer sizing in TCP more closely reflect actual needs, from Eric Dumazet. 9) Currently early socket demux only happens for TCP sockets, but we can do it for connected UDP sockets too. Implementation from Shawn Bohrer. 10) Refactor inet socket demux with the goal of improving hash demux performance for listening sockets. With the main goals being able to use RCU lookups on even request sockets, and eliminating the listening lock contention. From Eric Dumazet. 11) The bonding layer has many demuxes in it's fast path, and an RCU conversion was started back in 3.11, several changes here extend the RCU usage to even more locations. From Ding Tianhong and Wang Yufen, based upon suggestions by Nikolay Aleksandrov and Veaceslav Falico. 12) Allow stackability of segmentation offloads to, in particular, allow segmentation offloading over tunnels. From Eric Dumazet. 13) Significantly improve the handling of secret keys we input into the various hash functions in the inet hashtables, TCP fast open, as well as syncookies. From Hannes Frederic Sowa. The key fundamental operation is "net_get_random_once()" which uses static keys. Hannes even extended this to ipv4/ipv6 fragmentation handling and our generic flow dissector. 14) The generic driver layer takes care now to set the driver data to NULL on device removal, so it's no longer necessary for drivers to explicitly set it to NULL any more. Many drivers have been cleaned up in this way, from Jingoo Han. 15) Add a BPF based packet scheduler classifier, from Daniel Borkmann. 16) Improve CRC32 interfaces and generic SKB checksum iterators so that SCTP's checksumming can more cleanly be handled. Also from Daniel Borkmann. 17) Add a new PMTU discovery mode, IP_PMTUDISC_INTERFACE, which forces using the interface MTU value. This helps avoid PMTU attacks, particularly on DNS servers. From Hannes Frederic Sowa. 18) Use generic XPS for transmit queue steering rather than internal (re-)implementation in virtio-net. From Jason Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits) random32: add test cases for taus113 implementation random32: upgrade taus88 generator to taus113 from errata paper random32: move rnd_state to linux/random.h random32: add prandom_reseed_late() and call when nonblocking pool becomes initialized random32: add periodic reseeding random32: fix off-by-one in seeding requirement PHY: Add RTL8201CP phy_driver to realtek xtsonic: add missing platform_set_drvdata() in xtsonic_probe() macmace: add missing platform_set_drvdata() in mace_probe() ethernet/arc/arc_emac: add missing platform_set_drvdata() in arc_emac_probe() ipv6: protect for_each_sk_fl_rcu in mem_check with rcu_read_lock_bh vlan: Implement vlan_dev_get_egress_qos_mask as an inline. ixgbe: add warning when max_vfs is out of range. igb: Update link modes display in ethtool netfilter: push reasm skb through instead of original frag skbs ip6_output: fragment outgoing reassembled skb properly MAINTAINERS: mv643xx_eth: take over maintainership from Lennart net_sched: tbf: support of 64bit rates ixgbe: deleting dfwd stations out of order can cause null ptr deref ixgbe: fix build err, num_rx_queues is only available with CONFIG_RPS ...
| * ethernet/arc/arc_emac: add missing platform_set_drvdata() in arc_emac_probe()Wei Yongjun2013-11-111-0/+1
| | | | | | | | | | | | | | | | Add missing platform_set_drvdata() in arc_emac_probe(), otherwise calling platform_get_drvdata() in arc_emac_remove() may returns NULL. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
| * arc_emac: drop redundant mac address checkLuka Perkov2013-10-291-3/+3
| | | | | | | | | | | | | | | | | | | | | | Checking if MAC address is valid using is_valid_ether_addr() is already done in of_get_mac_address(). While at it, reorganize checking so it matches checks in other drivers. Signed-off-by: Luka Perkov <luka@openwrt.org> CC: Alexey Brodkin <Alexey.Brodkin@synopsys.com> CC: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* | of/irq: Use irq_of_parse_and_map()Thierry Reding2013-10-241-5/+5
|/ | | | | | | | | | Replace some instances of of_irq_map_one()/irq_create_of_mapping() and of_irq_to_resource() by the simpler equivalent irq_of_parse_and_map(). Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com> [grant.likely: resolved conflicts with core code renames] Signed-off-by: Grant Likely <grant.likely@linaro.org>
* ethernet/arc/arc_emac: Fix huge delays in large file copiesVineet Gupta2013-09-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | copying large files to a NFS mounted host was taking absurdly large time. Turns out that TX BD reclaim had a sublte bug. Loop starts off from @txbd_dirty cursor and stops when it hits a BD still in use by controller. However when it stops it needs to keep the cursor at that very BD to resume scanning in next iteration. However it was erroneously incrementing the cursor, causing the next scan(s) to fail too, unless the BD chain was completely drained out. [ARCLinux]$ ls -l -sh /disk/log.txt 17976 -rw-r--r-- 1 root root 17.5M Sep /disk/log.txt ========== Before ===================== [ARCLinux]$ time cp /disk/log.txt /mnt/. real 31m 7.95s user 0m 0.00s sys 0m 0.10s ========== After ===================== [ARCLinux]$ time cp /disk/log.txt /mnt/. real 0m 24.33s user 0m 0.00s sys 0m 0.19s Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> (commit_signer:3/4=75%) Cc: "David S. Miller" <davem@davemloft.net> (commit_signer:3/4=75%) Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: arc-linux-dev@synopsys.com Signed-off-by: David S. Miller <davem@davemloft.net>
* ethernet/arc/arc_emac - fix NAPI "work > weight" warningAlexey Brodkin2013-08-131-1/+1
| | | | | | | | | | | | | | | | | | | | | Initially I improperly set a boundary for maximum number of input packets to process on NAPI poll ("work") so it might be more than expected amount ("weight"). This was really harmless but seeing WARN_ON_ONCE on every device boot is not nice. So trivial fix ("<" instead of "<=") is here. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Mischa Jonker <mjonker@synopsys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
* arc_emac: fix compile-time errors & warnings on PPC64Alexey Brodkin2013-06-261-26/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As reported by "kbuild test robot" there were some errors and warnings on attempt to build kernel with "make ARCH=powerpc allmodconfig". And this patch addresses both errors and warnings. Below is a list of introduced changes: 1. Fix compile-time errors (misspellings in "dma_unmap_single") on PPC. 2. Use DMA address instead of "skb->data" as a pointer to data buffer. This fixed warnings on pointer to int conversion on 64-bit systems. 3. Re-implemented initial allocation of Rx buffers in "arc_emac_open" in the same way they're re-allocated during operation (receiving packets). So once again DMA address could be used instead of "skb->data". 4. Explicitly use EMAC_BUFFER_SIZE for Rx buffers allocation. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: netdev@vger.kernel.org Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Francois Romieu <romieu@fr.zoreil.com> Cc: Joe Perches <joe@perches.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Mischa Jonker <mjonker@synopsys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-kernel@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org Cc: Florian Fainelli <florian@openwrt.org> Cc: David Laight <david.laight@aculab.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethernet/arc/arc_emac - Add new driverAlexey Brodkin2013-06-255-0/+1209
Driver for non-standard on-chip ethernet device ARC EMAC 10/100, instantiated in some legacy ARC (Synopsys) FPGA Boards such as ARCAngel4/ML50x. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Francois Romieu <romieu@fr.zoreil.com> Cc: Joe Perches <joe@perches.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Mischa Jonker <mjonker@synopsys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-kernel@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org Cc: Florian Fainelli <florian@openwrt.org> Cc: David Laight <david.laight@aculab.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud