summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/3com
Commit message (Collapse)AuthorAgeFilesLines
* net/3com/3c515: Fix timer handling, prevent leaks and crashesThomas Gleixner2016-12-161-7/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The timer handling in this driver is broken in several ways: - corkscrew_open() initializes and arms a timer before requesting the device interrupt. If the request fails the timer stays armed. A second call to corkscrew_open will unconditionally reinitialize the quued timer and arm it again. Also a immediate device removal will leave the timer queued because close() is not called (open() failed) and therefore nothing issues del_timer(). The reinitialization corrupts the link chain in the timer wheel hash bucket and causes a NULL pointer dereference when the timer wheel tries to operate on that hash bucket. Immediate device removal lets the link chain poke into freed and possibly reused memory. Solution: Arm the timer after the successful irq request. - corkscrew_close() uses del_timer() On close the timer is disarmed with del_timer() which lets the following code race against a concurrent timer expiry function. Solution: Use del_timer_sync() instead - corkscrew_close() calls del_timer() unconditionally del_timer() is invoked even if the timer was never initialized. This works by chance because the struct containing the timer is zeroed at allocation time. Solution: Move the setup of the timer into corkscrew_setup(). Reported-by: Matthew Whitehead <tedheadster@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
* net: 3com: typhoon: fix typhoon_get_link_ksettingsPhilippe Reynes2016-11-091-1/+6
| | | | | | | | | | | | | | When moving from typhoon_get_settings to typhoon_getlink_ksettings in the commit f7a5537cd2a5 ("net: 3com: typhoon: use new api ethtool_{get|set}_link_ksettings"), we use a local variable supported but we forgot to update the struct ethtool_link_ksettings with this value. We also initialize advertising to zero, because otherwise it may be uninitialized if no case of the switch (tp->xcvr_select) is used. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: 3com: typhoon: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes2016-11-021-30/+30
| | | | | | | | | The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Reviewed-by: David Dillow <dave@thedillows.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: 3c509: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes2016-11-021-26/+29
| | | | | | | | The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: 3c59x: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes2016-11-021-6/+8
| | | | | | | | The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: deprecate eth_change_mtu, remove usageJarod Wilson2016-10-136-7/+0
| | | | | | | | | | | | | | | | | | | | | With centralized MTU checking, there's nothing productive done by eth_change_mtu that isn't already done in dev_set_mtu, so mark it as deprecated and remove all usage of it in the kernel. All callers have been audited for calls to alloc_etherdev* or ether_setup directly, which means they all have a valid dev->min_mtu and dev->max_mtu. Now eth_change_mtu prints out a netdev_warn about being deprecated, for the benefit of out-of-tree drivers that might be utilizing it. Of note, dvb_net.c actually had dev->mtu = 4096, while using eth_change_mtu, meaning that if you ever tried changing it's mtu, you couldn't set it above 1500 anymore. It's now getting dev->max_mtu also set to 4096 to remedy that. v2: fix up lantiq_etop, missed breakage due to drive not compiling on x86 CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* 3c59x: use IS_ENABLED() instead of checking for built-in or moduleJavier Martinez Canillas2016-09-121-1/+1
| | | | | | | | | | | The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Using the macro makes the code more readable by helping abstract away some of the Kconfig built-in and module enable details. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* treewide: replace dev->trans_start update with helperFlorian Westphal2016-05-045-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace all trans_start updates with netif_trans_update helper. change was done via spatch: struct net_device *d; @@ - d->trans_start = jiffies + netif_trans_update(d) Compile tested only. Cc: user-mode-linux-devel@lists.sourceforge.net Cc: linux-xtensa@linux-xtensa.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-hams@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2016-03-081-1/+1
|\ | | | | | | | | | | | | | | Several cases of overlapping changes, as well as one instance (vxlan) of a bug fix in 'net' overlapping with code movement in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
| * 3c59x: mask LAST_FRAG bit from length field in ringNeil Horman2016-02-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recently, I fixed a bug in 3c59x: commit 6e144419e4da11a9a4977c8d899d7247d94ca338 Author: Neil Horman <nhorman@tuxdriver.com> Date: Wed Jan 13 12:43:54 2016 -0500 3c59x: fix another page map/single unmap imbalance Which correctly rebalanced dma mapping and unmapping types. Unfortunately it introduced a new bug which causes oopses on older systems. When mapping dma regions, the last entry for a packet in the 3c59x tx ring encodes a LAST_FRAG bit, which is encoded as the high order bit of the buffers length field. When it is unmapped the LAST_FRAG bit is cleared prior to being passed to the unmap function. Unfortunately the commit above fails to do that masking. It was missed in testing because the system on which I tested it had an intel iommu, the driver for which ignores the size field, using only the DMA address as the token to identify the mapping to be released. However, on older systems that rely on swiotlb (or other dma drivers that key off that length field), not masking off that LAST_FRAG high order bit results in parsing a huge size to be release, leading to all sorts of odd corruptions and the like. Fix is easy, just mask the length with 0xFFF. It should really be &(LAST_FRAG-1), but 0xFFF is the style of the file, and I'd like to make this fix minimal and correct before making it prettier. Appies to the net tree cleanly. All testing on both iommu and swiommu based systems produce good results Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Steffen Klassert <klassert@mathematik.tu-chemnitz.de> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* | 3c59x: Ensure to apply the expires timeStafford Horne2016-02-281-1/+1
| | | | | | | | | | | | | | | | | | | | In commit 5b6490def9168af6a ("3c59x: Use setup_timer()") Amitoj removed add_timer which sets up the epires timer. In this patch the behavior is restore but it uses mod_timer which is a bit more compact. Signed-off-by: Stafford Horne <shorne@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | 3c59x: Use setup_timer()Amitoj Kaur Chawla2016-02-251-8/+2
|/ | | | | | | | | | | | | | | | | | | | | | | Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. The Coccinelle semantic patch that fixes this problem is as follows: // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); ... -t.data = d; -t.function = f; // </smpl> Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* 3c59x: fix another page map/single unmap imbalanceNeil Horman2016-01-131-1/+6
| | | | | | | | | | | | | | libdma debug found another page map/unmap imbalance in 3c59x. Multi fragment frames are mapped such that the lead fragment was mapped as a single entry, while all other fragments were mapped as pages. However, on unmapping they were all unmapped as pages. Fix is pretty easy, just unmap the lead frag as a single entry, and bump the for loop initalization up by one so that all subsequent frags get unmapped as pages Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: "David S. Miller" <davem@davemloft.net> CC: Steffen Klassert <klassert@mathematik.tu-chemnitz.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* 3c59x: balance page maps and unmapsNeil Horman2016-01-131-1/+1
| | | | | | | | | | debug kernel noticed a screw up in 3c59x. skbs being mapped as page were being unmapped as singles. Easy fix. Tested by myself Signed-off-by: Neil Horman <nhorman@tuxdriver.com CC: "David S. Miller" <davem@davemloft.net> CC: Steffen Klassert <klassert@mathematik.tu-chemnitz.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net: fix eisa_driver probe section mismatchFabian Frederick2015-12-142-2/+2
| | | | | | | | Some eisa_driver structures used __init probe functions which generates a warning and could crash if function is called after being deleted. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* 3c59x: Add BQL support for 3c59x ethernet driver.Loganaden Velvindron2015-08-241-3/+20
| | | | | | | | | | This BQL patch is based on work done by Tino Reichardt. Tested on 0000:05:00.0: 3Com PCI 3c905C Tornado at ffffc90000e6e000 by running Flent several times. Signed-off-by: Loganaden Velvindron <logan@elandsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* 3c59x: Fix resource leaks in vortex_openJia-Ju Bai2015-08-031-9/+8
| | | | | | | | | | When vortex_up is failed, the skb buffers allocated by __netdev_alloc_skb in vortex_open are not released, which may cause resource leaks. This bug has been submitted before. This patch modifies the error handling code to fix it. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* 3c59x: Fix shared IRQ handlingDenys Vlasenko2015-07-081-1/+3
| | | | | | | | | | | | | | | | | | | | As its first order of business, boomerang_interrupt() checks whether the device really has any pending interrupts. If it does not, it does nothing and returns, but it still returns IRQ_HANDLED. This is wrong: interrupt was not handled, IRQ handlers of other devices sharing this IRQ line need to be called. vortex_interrupt() has it right: it returns IRQ_NONE in this case via IRQ_RETVAL(0). Do the same in boomerang_interrupt(). Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: David S. Miller <davem@davemloft.net> CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net: remove all references to obsolete Ethernet-HOWTOPaul Gortmaker2015-06-231-13/+5
| | | | | | | | | | | | | | | | | | This howto made sense in the 1990s when users had to manually configure ISA cards with jumpers or vendor utilities, but with the implementation of PCI it became increasingly less and less relevant, to the point where it has been well over a decade since I last updated it. And there is no value in anyone else taking over updating it either. However the references to it continue to spread as boiler plate text from one Kconfig file into the next. We are not doing end users any favours by pointing them at this old document, so lets kill it with fire, once and for all, to hopefully stop any further spread. No code is changed in this commit, just Kconfig help text. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net: Use setup_timer and mod_timerVaishali Thakkar2015-02-111-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces the use of functions setup_timer and mod_timer. This is done using Coccinelle and semantic patch used for this as follows: // <smpl> @@ expression x,y,z,a,b; @@ -init_timer (&x); +setup_timer (&x, y, z); +mod_timer (&a, b); -x.function = y; -x.data = z; -x.expires = b; -add_timer(&a); // </smpl> Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: rename vlan_tx_* helpers since "tx" is misleading thereJiri Pirko2015-01-131-2/+2
| | | | | | | The same macros are used for rx as well. So rename it. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: typhoon: Remove redundant castsRasmus Villemoes2014-10-241-2/+2
| | | | | | | | | Both image_data and typhoon_fw->data are const u8*, so the cast to u8* is unnecessary and confusing. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: David Dillow <dave@thedillows.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-10-081-1/+1
|\
| * 3c59x: fix bad split of cpu_to_le32(pci_map_single())Sylvain "ythier" Hitier2014-10-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit 6f2b6a3005b2c34c39f207a87667564f64f2f91a, # 3c59x: Add dma error checking and recovery the intent is to split out the mapping from the byte-swapping in order to insert a dma_mapping_error() check. Kinda this semantic patch: // See http://coccinelle.lip6.fr/ // // Beware, grouik-and-dirty! @@ expression DEV, X, Y, Z; @@ - cpu_to_le32(pci_map_single(DEV, X, Y, Z)) + dma_addr_t addr = pci_map_single(DEV, X, Y, Z); + if (dma_mapping_error(&DEV->dev, addr)) + /* snip */; + cpu_to_le32(addr) However, the #else part (of the #if DO_ZEROCOPY test) is changed this way: - cpu_to_le32(pci_map_single(DEV, X, Y, Z)) + dma_addr_t addr = cpu_to_le32(pci_map_single(DEV, X, Y, Z)); // ^^^^^^^^^^^ // That mismatches the 3 other changes! + if (dma_mapping_error(&DEV->dev, addr)) + /* snip */; + cpu_to_le32(addr) Let's remove the leftover cpu_to_le32() for coherency. v2: Better changelog. v3: Add Acked-by Fixes: 6f2b6a3005b2c34c39f207a87667564f64f2f91a # 3c59x: Add dma error checking and recovery Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Sylvain "ythier" Hitier <sylvain.hitier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-09-231-9/+41
|\ \ | |/ | | | | | | | | | | | | | | | | | | Conflicts: arch/mips/net/bpf_jit.c drivers/net/can/flexcan.c Both the flexcan and MIPS bpf_jit conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * 3c59x: Fix bad offset spec in skb_frag_dma_mapNeil Horman2014-09-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Recently aded the use of skb_frag_dma_map to 3c59x, but didn't realize it automatically included the frag_offset internally, as well as provided an option to specify an extra offset in the parameter list. We need to specify an offset of 0 in the parameter list to avoid skb corruption that results in lost connections. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Linux Kernel list <linux-kernel@vger.kernel.org> CC: "David S. Miller" <davem@davemloft.net> CC: Meelis Roos <mroos@linux.ee> Tested-by: Meelis Roos <mroos@linux.ee>
| * 3c59x: Add dma error checking and recoveryNeil Horman2014-09-191-9/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Noted that 3c59x has no checks on transmit for failed DMA mappings, and no ability to unmap fragments when a single map fails in the middle of a transmit. This patch provides error checking to ensure that dma mappings work properly, and unrolls an skb mapping if a fragmented skb transmission has a mapping failure to prevent leaks. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Linux Kernel list <linux-kernel@vger.kernel.org> CC: "David S. Miller" <davem@davemloft.net> CC: Meelis Roos <mroos@linux.ee> Tested-by: Meelis Roos <mroos@linux.ee>
* | drivers/net: Convert remaining uses of pr_warning to pr_warnJoe Perches2014-09-093-30/+28
|/ | | | | | | | | | | | | | Use the much more common pr_warn instead of pr_warning. Other miscellanea: o Typo fixes submiting/submitting o Coalesce formats o Realign arguments o Add missing terminating '\n' to formats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* 3c59x: avoid panic in boomerang_start_xmit when finding page address:Neil Horman2014-09-051-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This bug was reported on a very old kernel (RHEL6, 2.6.32-491.el6): BUG: unable to handle kernel paging request at 00800000 IP: [<c04107b5>] nommu_map_page+0x15/0x110 *pdpt = 000000003454f001 *pde = 000000003f03d067 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/system/cpu/online Modules linked in: nfsd lockd nfs_acl auth_rpcgss sunrpc exportfs p4_clockmod ipv6 ppdev parport_pc parport microcode iTCO_wdt iTCO_vendor_support 3c59x mii dcdbas serio_raw snd_intel8x0 snd_ac97_codec ac97_bus snd_seq snd_seq_device snd_pcm snd_timer snd soundcore snd_page_alloc i2c_i801 sg lpc_ich mfd_core ext4 jbd2 mbcache sr_mod cdrom sd_mod crc_t10dif pata_acpi ata_generic ata_piix radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core dm_mirror dm_region_hash dm_log dm_mod [last unloaded: mperf] Pid: 4219, comm: nfsd Not tainted 2.6.32-491.el6.i686 #1 Dell Computer Corporation OptiPlex GX240 /OptiPlex GX240 EIP: 0060:[<c04107b5>] EFLAGS: 00010246 CPU: 0 EIP is at nommu_map_page+0x15/0x110 EAX: 00000000 EBX: c0a83480 ECX: 00000000 EDX: 00800000 ESI: 00000000 EDI: f70e7860 EBP: e2d09b54 ESP: e2d09b24 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process nfsd (pid: 4219, ti=e2d08000 task=e2ceaaa0 task.ti=e2d08000) Stack: 00000056 00000000 0000000e c65efd38 00000020 00000296 00000206 00000206 <0> c050c850 c0a83480 e2cef154 00000001 e2d09ba8 f8fcd585 00000510 00000001 <0> 00000000 00000000 f5172200 f8fdac00 0039ef8c f5277020 f70e7860 00000510 Call Trace: [<c050c850>] ? page_address+0xd0/0xe0 [<f8fcd585>] ? boomerang_start_xmit+0x3b5/0x520 [3c59x] [<c07b2975>] ? dev_hard_start_xmit+0xe5/0x400 [<f9182b00>] ? ip6_output_finish+0x0/0xf0 [ipv6] [<c07ca053>] ? sch_direct_xmit+0x113/0x180 [<c07d5588>] ? nf_hook_slow+0x68/0x120 [<c07b2ea5>] ? dev_queue_xmit+0x1b5/0x290 [<f9182b6d>] ? ip6_output_finish+0x6d/0xf0 [ipv6] [<f9184cb8>] ? ip6_xmit+0x3e8/0x490 [ipv6] [<f91ab9f9>] ? inet6_csk_xmit+0x289/0x2f0 [ipv6] [<c07f6451>] ? tcp_transmit_skb+0x431/0x7f0 [<c07a403f>] ? __alloc_skb+0x4f/0x140 [<c07f85a2>] ? tcp_write_xmit+0x1c2/0xa50 [<c07f90b1>] ? __tcp_push_pending_frames+0x31/0xe0 [<c07ea47a>] ? tcp_sendpage+0x44a/0x4b0 [<c07ea030>] ? tcp_sendpage+0x0/0x4b0 [<c079be1e>] ? kernel_sendpage+0x4e/0x90 [<f8457bb9>] ? svc_send_common+0xc9/0x120 [sunrpc] [<f8457c85>] ? svc_sendto+0x75/0x1f0 [sunrpc] [<c060d0d9>] ? _atomic_dec_and_lock+0x59/0x90 [<f87d55d0>] ? nfs3svc_encode_readres+0x0/0xc0 [nfsd] [<f845876d>] ? svc_authorise+0x2d/0x40 [sunrpc] [<f87d4410>] ? nfs3svc_release_fhandle+0x0/0x10 [nfsd] [<f8455721>] ? svc_process_common+0xf1/0x5a0 [sunrpc] [<f8457e86>] ? svc_tcp_sendto+0x36/0xa0 [sunrpc] [<f8461778>] ? svc_send+0x98/0xd0 [sunrpc] [<f87c698c>] ? nfsd+0xac/0x140 [nfsd] [<c04470e0>] ? complete+0x40/0x60 [<f87c68e0>] ? nfsd+0x0/0x140 [nfsd] [<c04802ac>] ? kthread+0x7c/0xa0 [<c0480230>] ? kthread+0x0/0xa0 [<c0409f9f>] ? kernel_thread_helper+0x7/0x10 Code: 8d b6 00 00 00 00 eb f8 8d b4 26 00 00 00 00 8d bc 27 00 00 00 00 55 89 e5 83 ec 30 89 75 f8 31 f6 89 7d fc 89 c7 89 c8 89 5d f4 <8b> 1a 8b 4d 08 c1 eb 19 c1 e3 04 8b 9b c0 29 c7 c0 83 e3 fc 29 But the problem seems to still exist upstream. It seems on 32 bit kernels page_address() can reutrn a NULL value in some circumstances, and the pci_map_single api isn't prepared to handle that (on this system it results in a bogus pointer deference in nommu_map_page. The fix is pretty easy, if we convert the 3c59x driver to use the more convieient skb_frag_dma_map api we don't need to find the virtual address of the page at all, and page gets mapped to the hardware properly. Verified to fix the problem as described by the reporter. Applies to the net tree Change Notes: v2) Converted PCI_DMA_TODEVICE to DMA_TO_DEVICE. Thanks Dave! v3) Actually Run git commit after making changes to v2 :) Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: klassert@mathematik.tu-chemnitz.de CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine2014-08-122-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* net: get rid of SET_ETHTOOL_OPSWilfried Klaebe2014-05-133-3/+3
| | | | | | | | | | | | | | | | | | | | | | net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: Dave Miller <davem@davemloft.net> Signed-off-by: Wilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Kconfig: rename HAS_IOPORT to HAS_IOPORT_MAPUwe Kleine-König2014-04-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | If the renamed symbol is defined lib/iomap.c implements ioport_map and ioport_unmap and currently (nearly) all platforms define the port accessor functions outb/inb and friend unconditionally. So HAS_IOPORT_MAP is the better name for this. Consequently NO_IOPORT is renamed to NO_IOPORT_MAP. The motivation for this change is to reintroduce a symbol HAS_IOPORT that signals if outb/int et al are available. I will address that at least one merge window later though to keep surprises to a minimum and catch new introductions of (HAS|NO)_IOPORT. The changes in this commit were done using: $ git grep -l -E '(NO|HAS)_IOPORT' | xargs perl -p -i -e 's/\b((?:CONFIG_)?(?:NO|HAS)_IOPORT)\b/$1_MAP/' Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 3c59x: Call dev_consume_skb_any instead of dev_kfree_skb.Eric W. Biederman2014-03-241-1/+1
| | | | | | | | | | Replace dev_kfree_skb with dev_consume_skb_any in vortex_start_xmit as it can be called in hard irq and other contexts. dev_consume_skb_any is used when vortext_start_xmit directly consumes the packet instead of dmaing it to the device. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
* 3c509: Call dev_consume_skb_any instead of dev_kfree_skb.Eric W. Biederman2014-03-241-1/+1
| | | | | | | | | | Replace dev_kfree_skb with dev_consume_skb_any in el3_start_xmit as it can be called in hard irq and other contexts. dev_consume_skb_any is used as on this simple hardware the skb is consumed directly by the start_xmit function. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
* Drivers: net: ethernet: 3com: 3c589_cs fixed coding style issuesJustin van Wijngaarden2014-02-181-543/+584
| | | | | | | checkpatch.pl clean-up, from 14 error/ 277 warnings, to 0 errors, 7 warnings Signed-off-by: Justin van Wijngaarden <justinvanwijngaarden@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* 3c59x: Remove unused pointer in vortex_eisa_cleanup()Christian Engelmayer2014-02-091-2/+0
| | | | | | | | Remove unused network device private data pointer 'vp' in function vortex_eisa_cleanup(). Detected by Coverity: CID 139826. Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net: delete non-required instances of include <linux/init.h>Paul Gortmaker2014-01-162-2/+0
| | | | | | | | | | | | | None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. This covers everything under drivers/net except for wireless, which has been submitted separately. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: 3com: fix warning for incorrect type in argumentdingtianhong2014-01-131-1/+1
| | | | | | | | | | | | | The commit c466a9b2b329f7d9982c14eedc83a923d3bc711c (net: 3com: slight optimization of addr compare) cause a warning: "passing argument 1 of 'ether_addr_equal' from incompatible pointer type", so fix it. I think julia will convert ether_addr_equal to ether_addr_equal_64bits later. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: 3com: slight optimization of addr comparedingtianhong2013-12-311-2/+1
| | | | | | | | | Use possibly more efficient ether_addr_equal to instead of memcmp. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* 3c59x: Add software timestampingMatthew Whitehead2013-12-191-0/+4
| | | | | | | | | | Added software timestamping ability. Tested with linuxptp and synchronized clocks to an average of less than 200 microseconds on 10 megabit ethernet. Tested on both Vortex and Boomerang models. Signed-off-by: Matthew Whitehead <tedheadster@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* 3c59x/net: Use dev_is_pci() instead of hardcodingYijing Wang2013-12-061-1/+1
| | | | | | | Use PCI standard macro dev_is_pci() instead of hardcoding. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: typhoon: remove unnecessary pci_set_drvdata()Jingoo Han2013-10-181-1/+0
| | | | | | | | | | The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: David Dillow <dave@thedillows.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* 3com: Fix drivers/net/ethernet/3com/Kconfig references to PCMCIA and 3c515Matthew Whitehead2013-10-031-2/+2
| | | | | | | | | The Vortex driver works with PCI and Cardbus devices, not PCMCIA. There never was an EISA 3c515 card, only ISA, so remove that option. Signed-off-by: Matthew Whitehead <tedheadster@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Move MII out from under NET_CORE and hide itBen Hutchings2013-06-191-1/+0
| | | | | | | | | | | | | All drivers that select MII also need to select NET_CORE because MII depends on it. This is a bit ridiculous because NET_CORE is just a menu option that doesn't enable any code by itself. There is also no need for it to be a visible option, since its users all select it. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* 3c59x: consolidate error cleanup in vortex_init_one()Sergei Shtylyov2013-06-121-13/+12
| | | | | | | | | | The PCI driver's probe() method duplicates the error cleanup code each time it has to do error exit. Consolidate the error cleanup code in one place and use *goto* to jump to the right places. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* 3c59x: remove useless VORTEX_PCI() invocationsSergei Shtylyov2013-05-201-9/+8
| | | | | | | | It's suboptimal to invoke quite complex VORTEX_PCI() macro every time we want to get a 'struct pci_dev *' when we already have it in a variable... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: 3com: 3c509: remove unnecessary codegovindarajulu.v2013-05-161-19/+0
| | | | | | | This patch removes unnecessary #if 0 code from 3c509.c Signed-off-by: govindarajulu.v <govindarajulu90@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* 3c59x: fix PCI resource managementSergei Shtylyov2013-05-111-12/+13
| | | | | | | | | | The driver wrongly claimed I/O ports at an address returned by pci_iomap() -- even if it was passed an MMIO address. Fix this by claiming/releasing all PCI resources in the PCI driver's probe()/remove() methods instead and get rid of 'must_free_region' flag weirdness (why would Cardbus claim anything for us?). Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* 3c59x: fix freeing nonexistent resource on driver unloadSergei Shtylyov2013-05-061-1/+1
| | | | | | | | | | | | | | | | | When unloading the driver that drives an EISA board, a message similar to the following one is displayed: Trying to free nonexistent resource <0000000000013000-000000000001301f> Then an user is unable to reload the driver because the resource it requested in the previous load hasn't been freed. This happens most probably due to a typo in vortex_eisa_remove() which calls release_region() with 'dev->base_addr' instead of 'edev->base_addr'... Reported-by: Matthew Whitehead <tedheadster@gmail.com> Tested-by: Matthew Whitehead <tedheadster@gmail.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2013-05-012-3/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: "Highlights (1721 non-merge commits, this has to be a record of some sort): 1) Add 'random' mode to team driver, from Jiri Pirko and Eric Dumazet. 2) Make it so that any driver that supports configuration of multiple MAC addresses can provide the forwarding database add and del calls by providing a default implementation and hooking that up if the driver doesn't have an explicit set of handlers. From Vlad Yasevich. 3) Support GSO segmentation over tunnels and other encapsulating devices such as VXLAN, from Pravin B Shelar. 4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton. 5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita Dukkipati. 6) In the PHY layer, allow supporting wake-on-lan in situations where the PHY registers have to be written for it to be configured. Use it to support wake-on-lan in mv643xx_eth. From Michael Stapelberg. 7) Significantly improve firewire IPV6 support, from YOSHIFUJI Hideaki. 8) Allow multiple packets to be sent in a single transmission using network coding in batman-adv, from Martin Hundebøll. 9) Add support for T5 cxgb4 chips, from Santosh Rastapur. 10) Generalize the VXLAN forwarding tables so that there is more flexibility in configurating various aspects of the endpoints. From David Stevens. 11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver, from Dmitry Kravkov. 12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo Neira Ayuso. 13) Start adding networking selftests. 14) In situations of overload on the same AF_PACKET fanout socket, or per-cpu packet receive queue, minimize drop by distributing the load to other cpus/fanouts. From Willem de Bruijn and Eric Dumazet. 15) Add support for new payload offset BPF instruction, from Daniel Borkmann. 16) Convert several drivers over to mdoule_platform_driver(), from Sachin Kamat. 17) Provide a minimal BPF JIT image disassembler userspace tool, from Daniel Borkmann. 18) Rewrite F-RTO implementation in TCP to match the final specification of it in RFC4138 and RFC5682. From Yuchung Cheng. 19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear you like netlink, so I implemented netlink dumping of netlink sockets.") From Andrey Vagin. 20) Remove ugly passing of rtnetlink attributes into rtnl_doit functions, from Thomas Graf. 21) Allow userspace to be able to see if a configuration change occurs in the middle of an address or device list dump, from Nicolas Dichtel. 22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes Frederic Sowa. 23) Increase accuracy of packet length used by packet scheduler, from Jason Wang. 24) Beginning set of changes to make ipv4/ipv6 fragment handling more scalable and less susceptible to overload and locking contention, from Jesper Dangaard Brouer. 25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*() instead. From Hong Zhiguo. 26) Optimize route usage in IPVS by avoiding reference counting where possible, from Julian Anastasov. 27) Convert IPVS schedulers to RCU, also from Julian Anastasov. 28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger Eitzenberger. 29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG, nfnetlink_log, and nfnetlink_queue. From Gao feng. 30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa. 31) Support several new r8169 chips, from Hayes Wang. 32) Support tokenized interface identifiers in ipv6, from Daniel Borkmann. 33) Use usbnet_link_change() helper in USB net driver, from Ming Lei. 34) Add 802.1ad vlan offload support, from Patrick McHardy. 35) Support mmap() based netlink communication, also from Patrick McHardy. 36) Support HW timestamping in mlx4 driver, from Amir Vadai. 37) Rationalize AF_PACKET packet timestamping when transmitting, from Willem de Bruijn and Daniel Borkmann. 38) Bring parity to what's provided by /proc/net/packet socket dumping and the info provided by netlink socket dumping of AF_PACKET sockets. From Nicolas Dichtel. 39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin Poirier" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits) filter: fix va_list build error af_unix: fix a fatal race with bit fields bnx2x: Prevent memory leak when cnic is absent bnx2x: correct reading of speed capabilities net: sctp: attribute printl with __printf for gcc fmt checks netlink: kconfig: move mmap i/o into netlink kconfig netpoll: convert mutex into a semaphore netlink: Fix skb ref counting. net_sched: act_ipt forward compat with xtables mlx4_en: fix a build error on 32bit arches Revert "bnx2x: allow nvram test to run when device is down" bridge: avoid OOPS if root port not found drivers: net: cpsw: fix kernel warn on cpsw irq enable sh_eth: use random MAC address if no valid one supplied 3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA) tg3: fix to append hardware time stamping flags unix/stream: fix peeking with an offset larger than data in queue unix/dgram: fix peeking with an offset larger than data in queue unix/dgram: peek beyond 0-sized skbs openvswitch: Remove unneeded ovs_netdev_get_ifindex() ...
OpenPOWER on IntegriCloud