summaryrefslogtreecommitdiffstats
path: root/drivers/net/e1000e
Commit message (Collapse)AuthorAgeFilesLines
* e1000e: Expose MDI-X status via ethtool changeChaitanya Lala2009-06-091-0/+9
| | | | | | | | | | | | Ethtool is a standard way of getting information about ethernet interfaces. We enhance ethtool kernel interface & e1000e to make the MDI-X status readable via ethtool in userspace. Signed-off-by: Chaitanya Lala <clala@riverbed.com> Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000e: Call e1000e_config_collision_dist() after TCTL has been setSimon Horman2009-06-091-2/+2
| | | | | | | | | | | | e1000e_config_collision_dist() sets tctl, but subsequently tctl is overwritten. It seems to me that as things stand the call to e1000e_config_collision_dist() has no effect and should either be removed or moved down a little bit. This kernel patch takes the latter option. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000e: Fixes possible phy corrupton on 82571 designs.Dave Graham2009-06-093-7/+83
| | | | | | | | | | | | | | | Phy corruption has been observed on 2-port 82571 adapters, and is root-caused to lack of synchronization between the 2 driver instances, which conflict when attempting to access the phy via the single MDIC register. A semaphore exists for this purpose, and is now used on these designs. Because PXE &/or EFI boot code (which we cannot expect to be built with this fix) may leave the inter-instance semaphore in an invalid initial state when the driver first loads, this fix also includes a one-time (per driver load) fix-up of the semaphore initial state. Signed-off-by: dave graham <david.graham@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: skb_shared_info optimizationEric Dumazet2009-06-081-2/+2
| | | | | | | | | | | | | | | | skb_dma_unmap() is quite expensive for small packets, because we use two different cache lines from skb_shared_info. One to access nr_frags, one to access dma_maps[0] Instead of dma_maps being an array of MAX_SKB_FRAGS + 1 elements, let dma_head alone in a new dma_head field, close to nr_frags, to reduce cache lines misses. Tested on my dev machine (bnx2 & tg3 adapters), nice speedup ! Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000e: bump the version numberBruce Allan2009-06-031-1/+1
| | | | | | Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000e: workaround a Tx hang on 82577/82578Bruce Allan2009-06-031-2/+7
| | | | | | | | | | | | With bi-directional stress traffic, the receiver could hang causing the hardware to stop and a "Detected Tx Unit Hang" message dumped to the system logfile. Temporarily workaround this issue by disabling Tx flow control by default. The issue is currently being investigated and a follow-on patch will be provided to revert this when it is resolved. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000e: add support for 82577/82578 GbE LOM partsBruce Allan2009-06-0310-68/+1441
| | | | | | | | | | | | | | This patch provides support for the next generation Intel desktop and mobile gigabit ethernet LOM adapters. These adapters are the follow-on parts to the LOMs tied to the prior ICH chipsets and are comprised of a MAC in the PCH chipset and an external PHY (82577 for mobile and 82578 for desktop versions). New features consist of PHY wakeup to save power by completely turning off the MAC while in Sx state, and 4K jumbo frames. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000e: specify max supported frame size in adapter structBruce Allan2009-06-035-20/+31
| | | | | | | | By putting the maximum frame size supported by the hardware into the adapter structure, the change_mtu entry point function can be cleaned up of checks for all the different max frame sizes supported by Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000e: correct flow control thresholdsBruce Allan2009-06-032-6/+10
| | | | | | | | | | | | | The flow control thresholds, i.e. high and low watermarks of the Rx FIFO for when the hardware should transmit PAUSE frames (XON and XOFF, respectively), need to be tuned for more efficient use of the FIFO. The logic to set the thresholds for parts that support early-receive (ERT) was also wrong in that it should check whether jumbo frames are in use. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000e: do not attempt to disable smart powerdown if not supportedBruce Allan2009-06-031-1/+2
| | | | | | | | | | During reset, the driver was attempting to disable the Smart Powerdown feature even if the part does not support Smart Powerdown. Check for support before attempting to disable the feature. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000e: enable CRC stripping by defaultBruce Allan2009-06-031-0/+2
| | | | | | | | | CRC stripping should be enabled by default but was not if it was not specified as a module parameter. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dont update dev->trans_startEric Dumazet2009-05-291-1/+0
| | | | | | | | | | | | | Second round of drivers for Gb cards (and NIU one I forgot in the 10GB round) Now that core network takes care of trans_start updates, dont do it in drivers themselves, if possible. Drivers can avoid one cache miss (on dev->trans_start) in their start_xmit() handler. Exceptions are NETIF_F_LLTX drivers Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* igb/e1000e: update PSSR_MDIX value to reflect correct bitAlexander Duyck2009-05-261-1/+1
| | | | | | | | | | | The phy port status register has the MDI-X status bit on bit 11, not bit 3 as is currently setup in the define. This patch corrects that so the correct bit is checked on igp PHY types. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000/e1000e/igb/ixgb: don't txhang after link downJesse Brandeburg2009-05-071-0/+2
| | | | | | | | | | | | | | | | after the recent changes to wired drivers to use only netif_carrier_off the driver can have outstanding tx work to complete that will never complete once link is down. Since the intel hardware will hold this tx work forever, the driver notices a tx timeout condition internally and might try to instigate printk and reset of the part with a netif_stop_queue, which doesn't work because link is down. Don't bother arming to tx hang detection when link is down. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000/e1000e/igb/ixgb: do not use netif_wake_queue un-necessarilyJesse Brandeburg2009-04-221-4/+4
| | | | | | | | | | | It was pointed out that the Intel wired ethernet drivers do not need to wake the tx queue since netif_carrier_on/off will take care of the qdisc management in order to guarantee the correct handling of the transmit routine enable state. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2009-04-211-4/+4
|\ | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/core/dev.c
| * e1000e: fix bug in restart queue logicJesse Brandeburg2009-04-171-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | If the e1000e transmit cleanup inner loop exited early, then cleaned might not be true. This could cause tx hangs or other badness. Use count to track the total number of descriptors cleaned instead of basing a tx queue restart off of a temporary working state variable. This code now makes the flow the same for e1000/e1000e/igb/ixgbe Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | e1000e: indicate link down at loadJesse Brandeburg2009-04-201-4/+5
|/ | | | | | | | | | | | | | | | | | | | | | | | As reported by Andrew Lutomirski <amluto@gmail.com> All the intel wired ethernet drivers were calling netif_carrier_off and netif_stop_queue (or variants) before calling register_netdevice This is incorrect behavior as was pointed out by davem, and causes ifconfig and friends to report a strange state before first link after the driver was loaded, since without a netif_carrier_off, the stack assumes carrier_on, but before register_netdev, netlink messages are not sent out telling link state. This apparently confused *some* versions of networkmanager. Andy tested this for e1000e and confirmed it was working for him. see thread: http://marc.info/?l=linux-netdev&m=123946479705636&w=2 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andy Lutomirski <amluto@gmail.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* NET/e1000e: Fix powering off during shutdownRafael J. Wysocki2009-04-161-14/+45
| | | | | | | | | | | | Prevent e1000e from putting the adapter into D3 during shutdown except when we're going to power off the system, since doing that may generally cause problems with kexec to happen (such problems were observed for igb and forcedeth). For this purpose seperate e1000e_shutdown() from e1000e_suspend() and use the appropriate PCI PM callbacks in both of them. Signed-off-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000/e1000: fix compile warningJesse Brandeburg2009-04-141-1/+1
| | | | | | | | | | e1000/e1000e compile report a possible unused variable, fix that for now. Shortly after this a small refactor and bug fix will follow in the same code. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang2009-04-071-4/+4
| | | | | | | | Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)Yang Hongyang2009-04-071-2/+2
| | | | | | | | Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* e1000e: update version numberJesse Brandeburg2009-03-261-1/+1
| | | | | | Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000e: fix close interrupt raceJesse Brandeburg2009-03-261-6/+10
| | | | | | | | | | | | | As noticed by Alan Cox, it is possible for e1000e to exit its interrupt handler or NAPI with interrupts enabled even when the driver is unloading or being configured administratively down. fix related to fix for: http://bugzilla.kernel.org/show_bug.cgi?id=12876 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000e: fix loss of multicast packetsJesse Brandeburg2009-03-261-44/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | e1000e (and e1000, igb, ixgbe, ixgb) all do a series of operations each time a multicast address is added. The flow goes something like 1) stack adds one multicast address 2) stack passes whole current list of unicast and multicast addresses to driver 3) driver clears entire list in hardware 4) driver programs each multicast address using iomem in a loop This was causing multicast packets to be lost during the reprogramming process. reference with test program: http://kerneltrap.org/mailarchive/linux-netdev/2009/3/14/5160514/thread Thanks to Dave Boutcher for his report and test program. This driver fix prepares an array all at once in memory and programs it in one shot to the hardware, not requiring an "erase" cycle. It would still be possible for packets to be dropped while the receiver is off during reprogramming. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Dave Boutcher <daveboutcher@gmail.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000e: commonize tx cleanup routine to match e1000 & igbAlexander Duyck2009-03-261-11/+8
| | | | | | | | | This change updates the e1000e tx cleanup routine to more closely match what already exists in igb and e1000. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000e: add support for 82574 device ID 0x10F6Bruce Allan2009-03-242-0/+2
| | | | | | | | | Add device ID for a new variant of the 82574 adapter. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Acked-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000e: fixup merge errorArthur Jones2009-03-201-1/+1
| | | | | | | | | | | | | | | | When merging into Jeff's tree: commit 5f66f208064f083aab5e55935d0575892e033b59 Author: Arthur Jones <ajones@riverbed.com> Date: Thu Mar 19 01:13:08 2009 +0000 e1000e: allow tx of pre-formatted vlan tagged packets We lost one line, this fixes that missing piece... Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000e: allow tx of pre-formatted vlan tagged packetsArthur Jones2009-03-201-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | As with igb, when the e1000e driver is fed 802.1q packets with hardware checksum on, it chokes with an error of the form: checksum_partial proto=81! As the logic there was not smart enough to look into the vlan header to pick out the encapsulated protocol. There are times when we'd like to send these packets out without having to configure a vlan on the interface. Here we check for the vlan tag and allow the packet to go out wiht the correct hardware checksum. Thanks to Kand Ly <kand@riverbed.com> for discovering the issue and the coming up with a solution. This patch is based upon his work. Fixups from Stephen Hemminger <shemminger@vyatta.com> and Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Stephen Hemminger <shemminger@vyatta.com> CC: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000e: fix dma error handling issuesAlexander Duyck2009-03-201-44/+32
| | | | | | | | | | There were a few issues I noticed in e1000e. These include a double free of the skb if mapping fails, and the fact that context descriptors appear to be left in the descriptor ring after the failure. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000e: add support for 82583 device idAlexander Duyck2009-03-205-22/+116
| | | | | | | | | | Add device ID and related support for 82583 mac. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Radheka Godse <radheka.godse@intel.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000e: fix unmap bugJesse Brandeburg2009-03-021-34/+28
| | | | | | | | | | | | | This is in reference to https://bugzilla.redhat.com/show_bug.cgi?id=484494 Also addresses issue show in kerneloops The e1000e transmit code was calling pci_unmap_page on dma handles that it might have called pci_map_single on. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000e: remove workaround for e1000 hardwareJesse Brandeburg2009-02-181-9/+0
| | | | | | | | | | | During the move of support for PCIe devices from e1000 to e1000e, this workaround necessary only for older non-PCIe devices was mistakenly copied into e1000e. Remove it. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/e1000e: fix sparse warning: Should it be static?Hannes Eder2009-02-171-1/+1
| | | | | | | | | | Impact: Make symbol static. Fix this sparse warning: drivers/net/e1000e/82571.c:1229:5: warning: symbol 'e1000_check_for_serdes_link_82571' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000e: Remove mutex_trylock and associated WARN on failure.dave graham2009-02-141-16/+1
| | | | | | | | | | | | | | | Single-thread access must be ensured for ICH8 NVM and PHY operations. This synchronization is provided by the nvm_mutex. To assist in understanding the contexts from which this code could be reached, a WARN was output if the mutex was not going to be immediately acquirable (if !mutex_trylock()). The code has now been optimized, and we have verified that the few remaining mutex contentions are reasonable and non-blocking, and it is time to remove the mutex_trylock() and WARN messages. Signed-off-by: dave graham <david.graham@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000e: Serdes - attempt autoneg when link restored.dave graham2009-02-102-1/+139
| | | | | | | | | | | | This patch addresses an issue where we did not restart auto-negotiation on serdes links when the link partner was disabled and re-enabled. It includes reworking the serdes link detect mechanism to be a state machine for 82571 and 82572 parts only. Signed-off-by: dave graham <david.graham@intel.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000e: remove RXSEQ link monitoring for serdesdave graham2009-02-101-2/+2
| | | | | | | | | | | | | | RXSEQ interrupts were used to force link state interrogation of serdes links, as the Si was not guaranteed to report LSC interrupts when the link changed state. On some bladeservers this resulted in false link up reports if no link partner was connected. The RXSEQ treatment is not necessary, as the link can be monitored from the watchdog timer, and the false link indications cease. Signed-off-by: dave graham <david.graham@intel.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000e: Disable dynamic clock gating for 82571 per si errata.dave graham2009-02-102-0/+13
| | | | | | | | | | | | | | | | 82571 and 82572 Errata #13 documents that the Si feature DMA Dynamic Clock Gating should be disabled, and identifies the workaround of disabling the feature by EEPROM setting. EEPROM versions that do not include the recommended workaround have been found in the field, and so some customers remain at risk. Because the feature DMA Dynamic clock Gating can be disabled by directly setting the appropriate bit in the E1000_CTRL_EXT register, this patch overrides the EEPROM setting, and force-disables the feature. Signed-off-by: dave graham <david.graham@intel.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000e: add aer supportJesse Brandeburg2009-02-101-9/+30
| | | | | | | | | | | most if not all of the devices supported by e1000e support AER (Advanced Error Reporting) so we attempt to register with the OS that we know how to reset ourselves after a fatal error. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000e: normalize usage of serdes_has_linkAlex Chiang2009-02-052-3/+3
| | | | | | | | | | | Cosmetic change to use struct e1000_mac_info.serdes_has_link consistently as the 'bool' that it's declared as. No functional change. Signed-off-by: Alex Chiang <achiang@hp.com> Acked-by: Jeff Kirsher <Jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: replace uses of __constant_{endian}Harvey Harrison2009-02-011-2/+2
| | | | | | | Base versions handle constant folding now. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2009-01-262-1/+6
|\ | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
| * e1000e: workaround hw errataJesse Brandeburg2009-01-262-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | There is a hardware errata in some revisions of the 82574 that needs to be worked around in the driver by setting a register bit at init. If this bit is not set A0 versions of the 82574 can generate tx hangs. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | e1000e: drop lltx, remove unnecessary lockJesse Brandeburg2009-01-222-33/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LLTX is deprecated and complicated, don't use it. It was observed by Don Ash <donash4@gmail.com> that e1000e was acquiring this lock in the NAPI cleanup path. This is obviously a bug, as this is a leftover from when e1000 supported multiple tx queues and fake netdevs. another user reported this to us and tested routing with the 2.6.27 kernel and this patch and reported a 3.5 % improvement in packets forwarded in a multi-port test on 82571 parts. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | e1000e: Invoke VLAN GRO handlerHerbert Xu2009-01-211-2/+2
| | | | | | | | | | | | | | | | Now that VLAN has GRO support as well, we can call its GRO handler as well. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: Remove redundant NAPI functionsBen Hutchings2009-01-211-7/+7
|/ | | | | | | | | | | Following the removal of the unused struct net_device * parameter from the NAPI functions named *netif_rx_* in commit 908a7a1, they are exactly equivalent to the corresponding *napi_* functions and are therefore redundant. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000e: Add process name to WARN message when detecting Mutex contentionDavid Graham2009-01-111-6/+13
| | | | | | | | | | | | | | Adds process name of the current mutex holder to the WARN message output when the e1000e driver attempts to acquire the nvm_mutex and finds that it is already being held. With this patch the WARN message indicates both the process name of the current mutex holder and the process name of the attempted acquisition, which together will help to identify the contending codepaths. Signed-off-by: David Graham <david.graham@intel.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* resource: allow MMIO exclusivity for device driversArjan van de Ven2009-01-071-1/+1
| | | | | | | | | | | | | | | | | | | | | Device drivers that use pci_request_regions() (and similar APIs) have a reasonable expectation that they are the only ones accessing their device. As part of the e1000e hunt, we were afraid that some userland (X or some bootsplash stuff) was mapping the MMIO region that the driver thought it had exclusively via /dev/mem or via various sysfs resource mappings. This patch adds the option for device drivers to cause their reserved regions to the "banned from /dev/mem use" list, so now both kernel memory and device-exclusive MMIO regions are banned. NOTE: This is only active when CONFIG_STRICT_DEVMEM is set. In addition to the config option, a kernel parameter iomem=relaxed is provided for the cases where developers want to diagnose, in the field, drivers issues from userspace. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* drivers/net/e1000e: fix sparse warnings: make symbols staticHannes Eder2008-12-261-2/+4
| | | | | | | | | | Fix this sparse warnings: drivers/net/e1000e/es2lan.c:1265:5: warning: symbol 'e1000_read_kmrn_reg_80003es2lan' was not declared. Should it be static? drivers/net/e1000e/es2lan.c:1298:5: warning: symbol 'e1000_write_kmrn_reg_80003es2lan' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Remove unused netdev arg from some NAPI interfaces.Neil Horman2008-12-221-7/+7
| | | | | | | | | | When the napi api was changed to separate its 1:1 binding to the net_device struct, the netif_rx_[prep|schedule|complete] api failed to remove the now vestigual net_device structure parameter. This patch cleans up that api by properly removing it.. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud