summaryrefslogtreecommitdiffstats
path: root/drivers/net/8139too.c
Commit message (Collapse)AuthorAgeFilesLines
* drivers/net: don't use flush_scheduled_work()Tejun Heo2010-12-121-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | flush_scheduled_work() is on its way out. This patch contains simple conversions to replace flush_scheduled_work() usage with direct cancels and flushes. Directly cancel the used works on driver detach and flush them in other cases. The conversions are mostly straight forward and the only dangers are, * Forgetting to cancel/flush one or more used works. * Cancelling when a work should be flushed (ie. the work must be executed once scheduled whether the driver is detaching or not). I've gone over the changes multiple times but it would be much appreciated if you can review with the above points in mind. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jay Cliburn <jcliburn@gmail.com> Cc: Michael Chan <mchan@broadcom.com> Cc: Divy Le Ray <divy@chelsio.com> Cc: e1000-devel@lists.sourceforge.net Cc: Vasanthy Kolluri <vkolluri@cisco.com> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Andrew Gallatin <gallatin@myri.com> Cc: Francois Romieu <romieu@fr.zoreil.com> Cc: Ramkrishna Vepa <ramkrishna.vepa@exar.com> Cc: Matt Carlson <mcarlson@broadcom.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Cc: netdev@vger.kernel.org
* Merge branch 'master' of ↵David S. Miller2010-06-111-1/+2
|\ | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
| * net8139: fix a race at the end of NAPIFigo.zhang2010-06-101-1/+1
| | | | | | | | | | | | | | | | | | fix a race at the end of NAPI complete processing, it had better do __napi_complete() first before re-enable interrupt. Signed-off-by:Figo.zhang <figo1802@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * 8139too: fix buffer overrun in rtl8139_init_boardDenis Kirjanov2010-06-071-0/+1
| | | | | | | | | | | | | | | | Fix rtl_chip_info buffer overrun when we can't identify the chip. (i = ARRAY_SIZE (rtl_chip_info) in this case) Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | 8139too: remove unnecessary cast of ioread32()'s return valueJunchang Wang2010-05-311-4/+4
|/ | | | | | | | ioread32() returns a 32-bit integer on all platforms. There is no need to cast its return value. Signed-off-by: Junchang Wang <junchangwang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: trans_start cleanupsEric Dumazet2010-05-101-2/+0
| | | | | | | | | | | Now that core network takes care of trans_start updates, dont do it in drivers themselves, if possible. Drivers can avoid one cache miss (on dev->trans_start) in their start_xmit() handler. Exceptions are NETIF_F_LLTX drivers Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2010-04-211-1/+1
|\ | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-6000.c net/core/dev.c
| * 8139too: Fix a typo in the function name.Alexander Kuznetsov2010-04-191-1/+1
| | | | | | | | | | Signed-off-by: Alexander Kuznetsov <alr.kuznetsov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'master' of ↵David S. Miller2010-04-111-0/+1
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/stmmac/stmmac_main.c drivers/net/wireless/wl12xx/wl1271_cmd.c drivers/net/wireless/wl12xx/wl1271_main.c drivers/net/wireless/wl12xx/wl1271_spi.c net/core/ethtool.c net/mac80211/scan.c
| * include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* | net: convert multicast list to list_headJiri Pirko2010-04-031-3/+3
|/ | | | | | | | | | | | | Converts the list and the core manipulating with it to be the same as uc_list. +uses two functions for adding/removing mc address (normal and "global" variant) instead of a function parameter. +removes dev_mcast.c completely. +exposes netdev_hw_addr_list_* macros along with __hw_addr_* functions for manipulation with lists on a sandbox (used in bonding and 80211 drivers) Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/8139too.c: Use (pr|netdev|netif)_<level> macro helpersJoe Perches2010-02-171-106/+81
| | | | | | | | | | | | | | | Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove #define PFX Use pr_<level> Use netdev_<level> Use netif_<level> Convert formats like %8.8 to %08 Remove periods from formats Coalesce long formats Use print_hex_dump Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: 8139too: convert to use mc helpersJiri Pirko2010-02-051-4/+3
| | | | | Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/: use DEFINE_PCI_DEVICE_TABLE()Alexey Dobriyan2010-01-071-1/+1
| | | | | | | | Use DEFINE_PCI_DEVICE_TABLE() so we get place PCI ids table into correct section in every case. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* 8139too: make PCI device ids constantMárton Németh2010-01-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The id_table field of the struct pci_driver is constant in <linux/pci.h> so it is worth to make pci_device_id also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // </smpl> Signed-off-by: Márton Németh <nm127@freemail.hu> Cc: Julia Lawall <julia@diku.dk> Cc: cocci@diku.dk Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net: Move && and || to end of previous lineJoe Perches2009-12-031-6/+6
| | | | | | | | | | | | | | Only files where David Miller is the primary git-signer. wireless, wimax, ixgbe, etc are not modified. Compile tested x86 allyesconfig only Not all files compiled (not x86 compatible) Added a few > 80 column lines, which I ignored. Existing checkpatch complaints ignored. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Use netdev_alloc_skb_ip_align()Eric Dumazet2009-10-131-2/+1
| | | | | Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: convert bulk of drivers to netdev_tx_tStephen Hemminger2009-09-011-3/+4
| | | | | | | | | | | | In a couple of cases collapse some extra code like: int retval = NETDEV_TX_OK; ... return retval; into return NETDEV_TX_OK; Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2009-07-161-0/+1
|\ | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/orinoco/main.c
| * netdev: restore MTU change operationBen Hutchings2009-07-121-0/+1
| | | | | | | | | | | | | | | | | | alloc_etherdev() used to install a default implementation of this operation, but it must now be explicitly installed in struct net_device_ops. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: use NETDEV_TX_OK instead of 0 in ndo_start_xmit() functionsPatrick McHardy2009-07-051-2/+2
|/ | | | | | | | | | | This patch is the result of an automatic spatch transformation to convert all ndo_start_xmit() return values of 0 to NETDEV_TX_OK. Some occurences are missed by the automatic conversion, those will be handled in a seperate patch. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* 8139*: convert printk() to pr_<foo>()Alexander Beregalov2009-05-261-67/+51
| | | | | | | Also convert DPRINTK to pr_debug and dev_printk to dev_<foo>. Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2009-04-231-5/+5
|\ | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/iucv/af_iucv.c
| * 8139too: fix HW initial flowJianjun kong2009-04-221-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While ifconfig eth0 up kernel calls open() of 8139 driver(8139too.c). In rtl8139_hw_start() of rtl8139_open(), 8139 driver enable RX before setting up the DMA buffer address. In this interval where RX was enabled and DMA buffer address is not yet set up, any incoming broadcast packet would be send to a strange physical address: 0x003e8800 which is the default value of DMA buffer address. Unfortunately, this address is used by Linux kernel. So kernel panics. This patch fix it by setting up DMA buffer address before RX enabled and everything is fine even under broadcast packets attack. Signed-off-by: Jonathan Lin <jon.lin@vatics.com> Signed-off-by: Amos Kong <jianjun@zeuux.org> Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | rtl8139: unify the struct's nameJianjun Kong2009-04-211-46/+46
|/ | | | | | | | | | unify the struct's name of "struct rtl8139_private *np" to "struct rtl8139_private *tp" most of them like this: struct rtl8139_private *tp = netdev_priv(dev); Signed-off-by: Amos Kong <jianjun@zeuux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* 8139too: allow to set mac address on running deviceJiri Pirko2009-03-131-1/+25
| | | | | | | | | | | Similar patch as for 8139cp posted yesterday, so the same comment: So far there was not a chance to set a mac address on running 8139too device. This is for example needed when you want to use this NIC as a bonding slave in bonding device in mode balance-alb. This simple patch allows it. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Remove redundant NAPI functionsBen Hutchings2009-01-211-3/+3
| | | | | | | | | | | Following the removal of the unused struct net_device * parameter from the NAPI functions named *netif_rx_* in commit 908a7a1, they are exactly equivalent to the corresponding *napi_* functions and are therefore redundant. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: add missing set_mac_address hookStephen Hemminger2009-01-111-1/+1
| | | | | | | | Many drivers lost the ability to set ethernet address accidently during the net_device_ops conversion. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Remove unused netdev arg from some NAPI interfaces.Neil Horman2008-12-221-3/+3
| | | | | | | | | | When the napi api was changed to separate its 1:1 binding to the net_device struct, the netif_rx_[prep|schedule|complete] api failed to remove the now vestigual net_device structure parameter. This patch cleans up that api by properly removing it.. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* 8139too: use err.h macrosStephen Hemminger2008-11-241-11/+7
| | | | | | | | Instead of using call by reference use the PTR_ERR macros to handle return value with error case. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: add more functions to netdevice opsStephen Hemminger2008-11-201-1/+1
| | | | | | | | | | | | This patch moves neigh_setup and hard_start_xmit into the network device ops structure. For bisection, fix all the previously converted drivers as well. Bonding driver took the biggest hit on this. Added a prefetch of the hard_start_xmit in the fast path to try and reduce any impact this would have. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* 8139: convert to net_device_opsStephen Hemminger2008-11-191-11/+16
| | | | | | | Convert to new network device ops interface. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net: Kill now superfluous ->last_rx stores.David S. Miller2008-11-031-1/+0
| | | | | | | | | | | | | The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Drivers need not do it any more. Some cases had to be skipped over because the drivers were making use of the ->last_rx value themselves. Signed-off-by: David S. Miller <davem@davemloft.net>
* net: convert print_mac to %pMJohannes Berg2008-10-271-3/+2
| | | | | | | | | | | | This converts pretty much everything to print_mac. There were a few things that had conflicts which I have just dropped for now, no harm done. I've built an allyesconfig with this and looked at the files that weren't built very carefully, but it's a huge patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* 8139x: reduce message severity on driver overlapStephen Hemminger2008-10-221-3/+2
| | | | | | | | | | | | | | | The 8139 drivers are a source of error messages that confuse users. Since this device can not be disambiguated by normal PCI device id's two drivers match the same info. But the module utilities seem to correctly handle this overlap, they try one driver, then if that doesn't load try the other. Therefore there is no need for a message to be logged with error level severity, just using info level instead. Can't be completely silent because user might have configure one driver and forgot the other one. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* 8139too: move wmb before TX DMA startAndreas Oberritter2008-10-081-1/+6
| | | | | | | | | The write barrier should be used before starting a DMA transfer. This fixes a problem, where almost all packets received on another machine had garbled content. Tested with an RTL8100C on a MIPS machine. Signed-off-by: Andreas Oberritter <obi@linuxtv.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* 8139too: [cosmetic] fix incorrect register for flash-romMats Erik Andersson2008-09-241-1/+2
| | | | | | | | | | | | | | | | | | | | I would like to submit a correction to the driver drivers/net/8139too.c, which in no way changes the compiled driver, but does change the value of a previously incorrect value for the configuration register address of Flash PROM on the network processor rtl8139C. This corrected value is in accordance with the datasheet for rtl8139C, and in addition this new value is indeed used in other functional drivers that use this adapter for programming a Flash memory chip in situ. But as said, the two new constants are never referenced in the driver maintained by you: they are only informational and correct! Mats Erik Andersson, meand@users.sourceforge.net Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* 8139too: use netdev_alloc_skbKevin Lo2008-09-031-2/+2
| | | | | | | | This patch uses netdev_alloc_skb. This sets skb->dev and allows arch specific allocation. Also cleanup the alignment code. Signed-off-by: Kevin Lo <kevlo@kevlo.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* 8139too: Fall back to PIO when MMIO fails.Dave Jones2008-07-221-3/+5
| | | | | Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* 8139too: Force usage of PIO on OQO2Dave Jones2008-07-221-0/+8
| | | | | | | | | | The OQO model 2 has an RTL8139 from Atheros that doesn't like MMIO. It fails on modprobe, with a 'PCI Bus error' message. Force it to always use polled IO. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* 8139too: Make PIO/MMIO a runtime decision through a module parameter.Dave Jones2008-07-221-64/+64
| | | | | | | | | | This is needed to support devices that only work with PIO without penalising devices that work fine with MMIO in distro kernels. It also allows us to eventually use PIO as a fallback when setting up MMIO fails. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* [netdrvr] kill sync_irq-before-freq_irq patternJeff Garzik2008-06-281-1/+0
| | | | | | | synchronize_irq() is superfluous when free_irq() call immediately follows it, because free_irq() also does a synchronize_irq() call of its own. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* 8139too: some style cleanupsMárton Németh2008-06-281-6/+6
| | | | | | | | | | | | | | | | | | Clean up the following errors and warnings reported by checkpatch.pl: + ERROR: Macros with complex values should be enclosed in parenthesis + WARNING: __func__ should be used instead of gcc specific __FUNCTION__ + WARNING: plain inline is preferred over __inline__ + WARNING: Use #include <linux/io.h> instead of <asm/io.h> + WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h> The changes were verified with by comparing the "objdump -d 8139too.ko" output which is exactly the same for the old and new version in case of config CONFIG_8139TOO=m, CONFIG_8139TOO_PIO=n, CONFIG_8139TOO_TUNE_TWISTER=n, CONFIG_8139TOO_8129=n, CONFIG_8139_OLD_RX_RESET=n. Software versions used: gcc 4.2.3, objdump 2.18.0.20080103, on elf32-i386. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* 8139too: use netstats in net_device structurePaulius Zaleckas2008-05-131-27/+26
| | | | | | | Use net_device_stats from net_device structure instead of local. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* misc drivers/net annotationsAl Viro2008-03-261-5/+5
| | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* 8139too fix for DreamcastAdrian McMenamin2008-02-111-1/+1
| | | | | | | | | Updates the 8139too driver to work with recently added (a724605cb7a66d423a494a395f9a8ba871b8a1eb) declared coherent memory patch for the Dreamcast. Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Convert files to UTF-8 and some cleanupsJan Engelhardt2007-10-191-1/+1
| | | | | | | | | | | | | | | | | | * Convert files to UTF-8. * Also correct some people's names (one example is Eißfeldt, which was found in a source file. Given that the author used an ß at all in a source file indicates that the real name has in fact a 'ß' and not an 'ss', which is commonly used as a substitute for 'ß' when limited to 7bit.) * Correct town names (Goettingen -> Göttingen) * Update Eberhard Mönkeberg's address (http://lkml.org/lkml/2007/1/8/313) Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Adrian Bunk <bunk@kernel.org>
* [netdrvr] Stop using legacy hooks ->self_test_count, ->get_stats_countJeff Garzik2007-10-101-3/+8
| | | | | | | These have been superceded by the new ->get_sset_count() hook. Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Introduce and use print_mac() and DECLARE_MAC_BUF()Joe Perches2007-10-101-5/+3
| | | | | | | This is nicer than the MAC_FMT stuff. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Nuke SET_MODULE_OWNER macro.Ralf Baechle2007-10-101-1/+0
| | | | | | | | | | | | It's been a useless no-op for long enough in 2.6 so I figured it's time to remove it. The number of people that could object because they're maintaining unified 2.4 and 2.6 drivers is probably rather small. [ Handled drivers added by netdev tree and some missed IRDA cases... -DaveM ] Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud