summaryrefslogtreecommitdiffstats
path: root/drivers/mtd
Commit message (Collapse)AuthorAgeFilesLines
* mtdchar: remove no-longer-used vma helpersLinus Torvalds2013-04-191-27/+0
| | | | | | | With the conversion to vm_iomap_memory(), these vma helpers are no longer used. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* vm: convert mtdchar mmap to vm_iomap_memory() helperLinus Torvalds2013-04-191-30/+2
| | | | | | | | | | This is my example conversion of a few existing mmap users. The mtdchar case is actually disabled right now (and stays disabled), but I did it because it showed up on my "git grep", and I was familiar with the code due to fixing an overflow problem in the code in commit 9c603e53d380 ("mtdchar: fix offset overflow detection"). Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge tag 'for-linus-20130318' of git://git.infradead.org/linux-mtdLinus Torvalds2013-03-183-58/+90
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MTD fixes from David Woodhouse: "This fixes a couple of problems. Firstly, some people are actually still using old small-page flash and we broke it by removing the ready check. Secondly. fix the handling of partitions on Broadcom 47xx devices. Recent changes had made it misdetect the location of the NVRAM and scribble over the bootloader when it tried to update the variables there. With predictably sad results." * tag 'for-linus-20130318' of git://git.infradead.org/linux-mtd: mtd: nand: reintroduce NAND_NO_READRDY as NAND_NEED_READRDY mtd: bcm47xxpart: look for NVRAM at the end of device Revert "mtd: bcm47xxpart: improve probing of nvram partition"
| * mtd: nand: reintroduce NAND_NO_READRDY as NAND_NEED_READRDYBrian Norris2013-03-142-39/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This partially reverts commit 1696e6bc2ae83734e64e206ac99766ea19e9a14e ("mtd: nand: kill NAND_NO_READRDY"). In that patch I overlooked a few things. The original documentation for NAND_NO_READRDY included "True for all large page devices, as they do not support autoincrement." I was conflating "not support autoincrement" with the NAND_NO_AUTOINCR option, which was in fact doing nothing. So, when I dropped NAND_NO_AUTOINCR, I concluded that I then could harmlessly drop NAND_NO_READRDY. But of course the fact the NAND_NO_AUTOINCR was doing nothing didn't mean NAND_NO_READRDY was doing nothing... So, NAND_NO_READRDY is re-introduced as NAND_NEED_READRDY and applied only to those few remaining small-page NAND which needed it in the first place. Cc: stable@kernel.org [3.5+] Reported-by: Alexander Shiyan <shc_work@mail.ru> Tested-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: bcm47xxpart: look for NVRAM at the end of deviceRafał Miłecki2013-03-081-7/+25
| | | | | | | | | | | | | | | | NVRAM is always placed at the end of device and it does not have to start at the beginning of a block, so check few possible offsets. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * Revert "mtd: bcm47xxpart: improve probing of nvram partition"Rafał Miłecki2013-03-081-13/+9
| | | | | | | | | | | | | | | | | | | | | | | | This reverts commit be3781b71ac03723b552dc156931620634ef1b22. Some CFE bootloaders have NVRAM at offset 0x1000. With that patch we were detecting such a bootloaders as a standard NVRAM partition. Changing anything in this pseudo-NVRAM resulted in corrupted bootloader and bricked device! Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | fs: Limit sys_mount to only request filesystem modules.Eric W. Biederman2013-03-031-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modify the request_module to prefix the file system type with "fs-" and add aliases to all of the filesystems that can be built as modules to match. A common practice is to build all of the kernel code and leave code that is not commonly needed as modules, with the result that many users are exposed to any bug anywhere in the kernel. Looking for filesystems with a fs- prefix limits the pool of possible modules that can be loaded by mount to just filesystems trivially making things safer with no real cost. Using aliases means user space can control the policy of which filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf with blacklist and alias directives. Allowing simple, safe, well understood work-arounds to known problematic software. This also addresses a rare but unfortunate problem where the filesystem name is not the same as it's module name and module auto-loading would not work. While writing this patch I saw a handful of such cases. The most significant being autofs that lives in the module autofs4. This is relevant to user namespaces because we can reach the request module in get_fs_type() without having any special permissions, and people get uncomfortable when a user specified string (in this case the filesystem type) goes all of the way to request_module. After having looked at this issue I don't think there is any particular reason to perform any filtering or permission checks beyond making it clear in the module request that we want a filesystem module. The common pattern in the kernel is to call request_module() without regards to the users permissions. In general all a filesystem module does once loaded is call register_filesystem() and go to sleep. Which means there is not much attack surface exposed by loading a filesytem module unless the filesystem is mounted. In a user namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT, which most filesystems do not set today. Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Reported-by: Kees Cook <keescook@google.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
* Merge tag 'for-linus-20130301' of git://git.infradead.org/linux-mtdLinus Torvalds2013-03-0233-329/+1800
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MTD update from David Woodhouse: "Fairly unexciting MTD merge for 3.9: - misc clean-ups in the MTD command-line partitioning parser (cmdlinepart) - add flash locking support for STmicro chips serial flash chips, as well as for CFI command set 2 chips. - new driver for the ELM error correction HW module found in various TI chips, enable the OMAP NAND driver to use the ELM HW error correction - added number of new serial flash IDs - various fixes and improvements in the gpmi NAND driver - bcm47xx NAND driver improvements - make the mtdpart module actually removable" * tag 'for-linus-20130301' of git://git.infradead.org/linux-mtd: (45 commits) mtd: map: BUG() in non handled cases mtd: bcm47xxnflash: use pr_fmt for module prefix in messages mtd: davinci_nand: Use managed resources mtd: mtd_torturetest can cause stack overflows mtd: physmap_of: Convert device allocation to managed devm_kzalloc() mtd: at91: atmel_nand: for PMECC, add code to check the ONFI parameter ECC requirement. mtd: atmel_nand: make pmecc-cap, pmecc-sector-size in dts is optional. mtd: atmel_nand: avoid to report an error when lookup table offset is 0. mtd: bcm47xxsflash: adjust names of bus-specific functions mtd: bcm47xxpart: improve probing of nvram partition mtd: bcm47xxpart: add support for other erase sizes mtd: bcm47xxnflash: register this as normal driver mtd: bcm47xxnflash: fix message mtd: bcm47xxsflash: register this as normal driver mtd: bcm47xxsflash: write number of written bytes mtd: gpmi: add sanity check for the ECC mtd: gpmi: set the Golois Field bit for mx6q's BCH mtd: devices: elm: Removes <xx> literals in elm DT node mtd: gpmi: fix a dereferencing freed memory error mtd: fix the wrong timeo for panic_nand_wait() ...
| * mtd: bcm47xxnflash: use pr_fmt for module prefix in messagesRafał Miłecki2013-02-133-4/+8
| | | | | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: davinci_nand: Use managed resourcesMrugesh Katepallewar2013-02-131-19/+5
| | | | | | | | | | | | | | | | | | davinci_nand driver currently uses normal kzalloc, ioremap and get_clk routines. This patch replaces these routines with devm_kzalloc, devm_request_and_ioremap and devm_clk_get resp. Signed-off-by: Mrugesh Katepallewar <mrugesh.mk@ti.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: mtd_torturetest can cause stack overflowsAl Cooper2013-02-131-14/+11
| | | | | | | | | | | | | | | | | | | | mtd_torturetest uses the module parm "ebcnt" to control the size of a stack based array of int's. When "ebcnt" is large, Ex: 1000, it causes stack overflows on systems with small kernel stacks. The fix is to move the array from the stack to kmalloc memory. Signed-off-by: Al Cooper <alcooperx@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: physmap_of: Convert device allocation to managed devm_kzalloc()Ezequiel Garcia2013-02-121-5/+3
| | | | | | | | | | Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: at91: atmel_nand: for PMECC, add code to check the ONFI parameter ECC ↵Josh Wu2013-02-121-3/+87
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | requirement. This patch will check NAND flash's ecc minimum requirement in ONFI parameter. 1. if pmecc-cap, pmecc-sector-size is set in dts. then use it. Driver will print out a WARNING if the values are different from ONFI parameters. 2. if pmecc-cap, pmecc-sector-size is not set in dts, then use the value from ONFI parameters. * If ONFI ECC parameters are in ONFI extended parameter page, since we are not support it, so assume the minimum ecc requirement is 2 bits in 512 bytes. * For non-ONFI support nand flash, also assume the minimum ecc requirement is 2 bits in 512 bytes. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: atmel_nand: make pmecc-cap, pmecc-sector-size in dts is optional.Josh Wu2013-02-121-21/+31
| | | | | | | | | | | | | | | | | | If those two are not specified in dts file, driver will report an error. TODO: in this case, driver will find ecc requirement in NAND ONFI parameters. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: atmel_nand: avoid to report an error when lookup table offset is 0.Josh Wu2013-02-121-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | Before this patch, we assume the whole ROM code are mapping to memory. So it is wrong if the lookup table offset is 0. After this patch, we can map only the lookup table of ROM code to memory intead of the whole ROM code (about 1M). In this case, one lookup table offset can be 0. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: bcm47xxsflash: adjust names of bus-specific functionsRafał Miłecki2013-02-041-4/+12
| | | | | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: bcm47xxpart: improve probing of nvram partitionHauke Mehrtens2013-02-041-9/+13
| | | | | | | | | | | | | | | | | | The nvram in the nvram partition does not start at the beginning of the partition on every device. Sometimes they are stating in the middle of a partition or the first 0x1000 bytes are free. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: bcm47xxpart: add support for other erase sizesHauke Mehrtens2013-02-041-1/+4
| | | | | | | | | | | | | | | | To make the partitions writable they should aligned to erase sizes of the flash. If the erase size is small use 0x10000. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: bcm47xxnflash: register this as normal driverHauke Mehrtens2013-02-041-5/+2
| | | | | | | | | | | | | | | | | | | | When platform_driver_probe() is used and no device is registered for this driver -ENODEV is returned and and error message is shown. Not all BCM47xx SoC have a nand flash chip controller and chip and for them an error message was shown. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: bcm47xxnflash: fix messageHauke Mehrtens2013-02-041-1/+2
| | | | | | | | | | | | | | This is not a serial flash driver, but a nand flash driver Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: bcm47xxsflash: register this as normal driverHauke Mehrtens2013-02-041-1/+2
| | | | | | | | | | | | | | | | | | | | When platform_driver_probe() is used and no device is registered for this driver -ENODEV is returned and and error message is shown. Not all BCM47xx SoC have a serial flash chip controller and chip and for them an error message was shown. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: bcm47xxsflash: write number of written bytesHauke Mehrtens2013-02-041-0/+1
| | | | | | | | | | | | | | The callback assumes the number of read bytes is written to retlen. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: gpmi: add sanity check for the ECCHuang Shijie2013-02-042-2/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | We do the check based on the following two facts: [1] The mx23/mx28 can only support 20-bits ECC, while the mx6 can supports 40-bits ECC. [2] The mx23/mx28 can only support the GF13, while the mx6 can supports GF13 and GF14. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: gpmi: set the Golois Field bit for mx6q's BCHHuang Shijie2013-02-043-2/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The GF13 can be only used in the following case: The ECC data chunk is less then 1K bytes. In mx23/mx28, the ecc data chunk is 512 bytes. So it is okay. But in mx6q, we begin to use some large nand chip whose ecc data chunk maybe 1K bytes long. So when the data chunk is 1K bytes, we have to use the GF14. This patch sets the Golois Field bit when the GF14 is needed. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: devices: elm: Removes <xx> literals in elm DT nodePhilip Avinash2013-02-041-1/+1
| | | | | | | | | | | | | | | | | | As part of removing generalized dependency, replace <xx> literal fields in DT compatible field with <52> for am335x platforms. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: gpmi: fix a dereferencing freed memory errorHuang Shijie2013-02-041-1/+1
| | | | | | | | | | | | | | | | | | | | The patch "490e280 mtd: gpmi-nand: Convert to module_platform_driver()" introduced a "dereferencing freed memory" error. This patch fixes it. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: fix the wrong timeo for panic_nand_wait()Huang Shijie2013-02-041-6/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The panic_nand_wait() expects the timeo in ms and not in jiffies. But in nand_wait(), the timeo for panic_nand_wait() is assigned with wrong value(jiffies + some delay). The timeo should be set like the panic_nand_write() does. This patch passes timeo in ms to panic_nand_wait(). And this patch also passes timeo in jiffies(converted by msecs_to_jiffies) to time_before() which makes the code more readable. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) lockingStefan Roese2013-02-042-0/+218
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently cfi_cmdset_0002.c does not support PPB locking of sectors. This patch adds support for this locking/unlocking mechanism. It is needed on some platforms, since newer U-Boot versions do support this PPB locking and protect for example their environment sector(s) this way. This PPB locking/unlocking will be enabled for all devices supported by cfi_cmdset_0002 reporting 8 in the CFI word 0x49 (Sector Protect/Unprotect scheme). Please note that PPB locking does support sector-by-sector locking. But the whole chip can only be unlocked together. So unlocking one sector will automatically unlock all sectors of this device. Because of this chip limitation, the PPB unlocking function saves the current locking status of all sectors before unlocking the whole device. After unlocking the saved locking status is re-configured. This way only the addressed sectors will be unlocked. To selectively enable this advanced sector protection mechanism, the device-tree property "use-advanced-sector-protection" has been created. To enable support for this locking this property needs to be present in the flash DT node. E.g.: nor_flash@0,0 { compatible = "amd,s29gl256n", "cfi-flash"; bank-width = <2>; use-advanced-sector-protection; ... Tested with Spansion S29GL512S10THI and Micron JS28F512M29EWx flash devices. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: Allow removal of partitioning modulesLubomir Rintel2013-02-043-0/+19
| | | | | | | | | | Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: cmdlinepart: Make it into a moduleLubomir Rintel2013-02-042-3/+9
| | | | | | | | | | | | | | All other partitioning schemes can be compiled as modules Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: gpmi: dump the BCH registersHuang Shijie2013-02-042-0/+7
| | | | | | | | | | | | | | Dump the BCH registers in gpmi_dump_info(). Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: nane: print source of error messageTormod Volden2013-02-041-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the function name to the error message. These messages are not very helpful: [183356.176682] uncorrectable error : [183356.180273] uncorrectable error : [183356.184194] uncorrectable error : [183356.187773] uncorrectable error : [183356.191280] uncorrectable error : Artem: amended the patch a bit Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
| * mtd: fsl_ifc_nand: use more portable i/o accessorsKim Phillips2013-02-041-114/+119
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | in/out_be32 accessors are Power arch centric whereas ioread/writebe32 are available in other arches. Since the IFC device registers are annotated big endian in fsl_ifc.h, the accessor annotations now match, resulting in the pleasant side-effect of this patch silencing sparse endian warnings such as the following: drivers/mtd/nand/fsl_ifc_nand.c:179:19: warning: incorrect type in argument 1 (different base types) drivers/mtd/nand/fsl_ifc_nand.c:179:19: expected unsigned int volatile [noderef] [usertype] <asn:2>*addr drivers/mtd/nand/fsl_ifc_nand.c:179:19: got restricted __be32 [noderef] <asn:2>*<noident> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: uclinux: add a comment about why uclinux_ram_map must not be staticUwe Kleine-König2013-02-041-0/+6
| | | | | | | | | | | | | | | | | | | | | | I was (at least) the second person trying to fix a warning by sparse, so document in the code why this is a bad idea and add an extern declaration to make sparse happy. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: uclinux: support ROM and allow passing the base addressUwe Kleine-König2013-02-042-6/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | This allows to put the filesystem at a defined address in ROM allowing to save more precious RAM. I think it's safe to default to ROM because the intention of using the uclinux map is to use a romfs and so mtd-ram doesn't give you anything that mtd-rom doesn't. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: bcm47xxsflash: add own struct for abstrating bus typeRafał Miłecki2013-02-042-13/+39
| | | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
| * mtd: bcm47xxpart: register extra "firmware" partitionRafał Miłecki2013-02-041-0/+11
| | | | | | | | | | | | | | It's required for accessing trx header (usually re-calculating a checksum) and for writing a new firmware. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
| * mtd: bcm47xxpart: simplify size calculation to one loopRafał Miłecki2013-02-041-5/+6
| | | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
| * mtd: chips: Add support for GigaDevice GD25Q32/GD25Q64 SPI Flash in m25p80.cMichel Stempin2013-02-041-0/+4
| | | | | | | | | | | | | | | | | | | | Add support for GigaDevice GD25Q32 32 Mbit (4 MB) SPI Flash (see datasheet: http://www.gigadevice.com/UserFiles/GD25Q32_Rev0.2(1).pdf) used in Hame MPR-A1 and clones, and for GigaDevice GD25Q64 64 Mbit (8 MB) SPI Flash used in Hame MPR-A2 devices (datasheet: http://www.gigadevice.com/UserFiles/GD25Q64.pdf). Signed-off-by: Michel Stempin <michel.stempin@wanadoo.fr> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: nand: omap2: Support for hardware BCH error correction.Philip Avinash2013-02-041-39/+534
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ELM module can be used for hardware error correction of BCH 4 & 8 bit. ELM module functionality is verified by checking the availability of handle for ELM module in device tree. Hence supporting 1. ELM module available, BCH error correction done by ELM module. Also support read & write page in one shot by adding custom read_page and write_page methods. This helps in optimizing code for NAND flashes with page size less than 4 KB. 2. If ELM module not available fall back to software BCH error correction support. New structure member is added to omap_nand_info 1. "is_elm_used" to know the status of whether the ELM module is used for error correction or not. 2. "elm_dev" device pointer to elm device on detection of ELM module. Also being here update the device tree documentation of gpmc-nand for adding optional property elm_id. Note: ECC layout uses 1 extra bytes for 512 byte of data to handle erased pages. Extra byte programmed to zero for programmed pages. Also BCH8 requires 14 byte ecc to maintain compatibility with RBL ECC layout. This results a common ecc layout across RBL, U-boot & Linux with BCH8. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: devices: elm: Add support for ELM error correctionPhilip Avinash2013-02-042-1/+407
| | | | | | | | | | | | | | | | | | The ELM hardware module can be used to speedup BCH 4/8/16 ECC scheme error correction. For now only 4 & 8 bit support is added Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: nand: omap2: Update nerrors using ecc.strengthPhilip Avinash2013-02-041-4/+8
| | | | | | | | | | | | | | | | | | | | Remove check of ecc bytes with 13, number of errors can directly update from nand ecc strength. This will increase re-usability of the code. Also add macro definitions BCH8_ERROR_MAX & BCH4_ERROR_MAX for better readability and cleaner code. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: mxc_nand: compress ID info for send_read_id_v3Roman Schneider2013-02-041-0/+11
| | | | | | | | | | | | | | | | Also compress the id in case of a v3 NAND flash controller (i.mx51, i.mx53) and 16Bit buswidth. Signed-off-by: Roman Schneider <schneider@at.festo.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: m25p80: Flash protection support for STmicro chipsAustin Boyle2013-02-041-0/+96
| | | | | | | | | | | | | | | | | | | | | | This patch adds generic support for flash protection on STmicro chips. On chips with less than 3 protection bits, the unused bits are don't cares and so can be written anyway. The lock function will only change the protection bits if it would not unlock other areas. Similarly, the unlock function will not lock currently unlocked areas. Tested on the m25p64. Signed-off-by: Austin Boyle <Austin.Boyle@aviatnet.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: rename random32() to prandom_u32()Akinobu Mita2013-02-044-15/+15
| | | | | | | | | | | | | | | | Use more preferable function name which implies using a pseudo-random number generator. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: cmdlinepart: update /proc/mtd commentChristopher Cordahi2013-02-041-1/+1
| | | | | | | | | | | | | | | | | | | | /proc/mtd doesn't contain the mtd-id of the device, but the part name from the command line. This corrects what I believe is an obsolete comment from commit a0ee24a03b1c06813c814b9f70946c8984752f01. Signed-off-by: Christopher Cordahi <christophercordahi@nanometrics.ca> Cc: Philip Rakity <prakity@yahoo.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: cmdlinepart: describe mtd orderingChristopher Cordahi2013-02-041-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The mtd documentation makes no mention of the useful feature whereby partitions' logical ordering need not match their physical ordering. Truncation of parts, skipping of zero sized parts, and handling of overlapping parts are similarly not mentioned. This updates the comments at the top of file describing the command line parsing as currently implemented. I proposed this in http://lists.infradead.org/pipermail/linux-mtd/2012-December/045314.html Signed-off-by: Christopher Cordahi <christophercordahi@nanometrics.ca> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: cmdlinepart: skip partitions truncated to zeroChristopher Cordahi2013-02-041-9/+8
| | | | | | | | | | | | | | | | | | | | Perform flash size truncation before skipping zero sized partition so that if the result is a zero sized, it will be skipped like the others. Signed-off-by: Christopher Cordahi <christophercordahi@nanometrics.ca> Acked-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: cmdlinepart: fix skipping zero sized partitionChristopher Cordahi2013-02-041-0/+1
| | | | | | | | | | | | | | | | | | | | Decrement index i after skipping a zero sized partition. On next loop iteration, the index will be the same as before, but the data will be new as it was moved when earlier partition was skipped. Signed-off-by: Christopher Cordahi <christophercordahi@nanometrics.ca> Acked-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: gpmi: Always report ECC stats and return max_bitflipsZach Sadecki2013-02-041-19/+8
| | | | | | | | | | | | | | | | | | Always report corrected and failed ECC stats back up to the MTD layer. Also return max_bitflips from read_page() as is expected from NAND drivers now. Signed-off-by: Zach Sadecki <zsadecki@itwatchdogs.com> Acked-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
OpenPOWER on IntegriCloud