summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand
Commit message (Collapse)AuthorAgeFilesLines
* Merge tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtdLinus Torvalds2012-06-0133-612/+1181
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull mtd update from David Woodhouse: - More robust parsing especially of xattr data in JFFS2 - Updates to mxc_nand and gpmi drivers to support new boards and device tree - Improve consistency of information about ECC strength in NAND devices - Clean up partition handling of plat_nand - Support NAND drivers without dedicated access to OOB area - BCH hardware ECC support for OMAP - Other fixes and cleanups, and a few new device IDs Fixed trivial conflict in drivers/mtd/nand/gpmi-nand/gpmi-nand.c due to added include files next to each other. * tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd: (75 commits) mtd: mxc_nand: move ecc strengh setup before nand_scan_tail mtd: block2mtd: fix recursive call of mtd_writev mtd: gpmi-nand: define ecc.strength mtd: of_parts: fix breakage in Kconfig mtd: nand: fix scan_read_raw_oob mtd: docg3 fix in-middle of blocks reads mtd: cfi_cmdset_0002: Slight cleanup of fixup messages mtd: add fixup for S29NS512P NOR flash. jffs2: allow to complete xattr integrity check on first GC scan jffs2: allow to discriminate between recoverable and non-recoverable errors mtd: nand: omap: add support for hardware BCH ecc ARM: OMAP3: gpmc: add BCH ecc api and modes mtd: nand: check the return code of 'read_oob/read_oob_raw' mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw' mtd: m25p80: Add support for Winbond W25Q80BW jffs2: get rid of jffs2_sync_super jffs2: remove unnecessary GC pass on sync jffs2: remove unnecessary GC pass on umount jffs2: remove lock_super mtd: gpmi: add gpmi support for mx6q ...
| * mtd: mxc_nand: move ecc strengh setup before nand_scan_tailSascha Hauer2012-06-011-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 6a918bade9dab40aaef80559bd1169c69e8d69cb, the mxc_nand driver fails with: Driver must set ecc.strength when using hardware ECC This is because nand_scan_tail checks for correct ecc strength settings, so we must set them up before nand_scan_tail. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: stable@vger.kernel.org [3.4+] Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: gpmi-nand: define ecc.strengthMarek Vasut2012-06-011-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix an issue which was introduced by the recent addition of ecc.strength. The ecc.strength wasn't set in gpmi-nand, resulting in the following crash: [ 2.550000] kernel BUG at drivers/mtd/nand/nand_base.c:3347! ... [ 2.550000] [<c020841c>] (nand_scan_tail+0x328/0x650) from [<c02f68e0>] (gpmi_nand_probe+0x43c/0x5a4) [ 2.550000] [<c02f68e0>] (gpmi_nand_probe+0x43c/0x5a4) from [<c01f6618>] (platform_drv_probe+0x14/0x18) [ 2.550000] [<c01f6618>] (platform_drv_probe+0x14/0x18) from [<c01f55b0>] (driver_probe_device+0x74/0x1fc) [ 2.550000] [<c01f55b0>] (driver_probe_device+0x74/0x1fc) from [<c01f57cc>] (__driver_attach+0x94/0x98) [ 2.550000] [<c01f57cc>] (__driver_attach+0x94/0x98) from [<c01f3d40>] (bus_for_each_dev+0x50/0x80) [ 2.550000] [<c01f3d40>] (bus_for_each_dev+0x50/0x80) from [<c01f4e18>] (bus_add_driver+0x188/0x25c) [ 2.550000] [<c01f4e18>] (bus_add_driver+0x188/0x25c) from [<c01f5a70>] (driver_register+0x78/0x138) [ 2.550000] [<c01f5a70>] (driver_register+0x78/0x138) from [<c043dc7c>] (gpmi_nand_init+0xc/0x30) [ 2.550000] [<c043dc7c>] (gpmi_nand_init+0xc/0x30) from [<c0008824>] (do_one_initcall+0x108/0x17c) [ 2.550000] [<c0008824>] (do_one_initcall+0x108/0x17c) from [<c042a8b8>] (kernel_init+0xfc/0x1bc) [ 2.550000] [<c042a8b8>] (kernel_init+0xfc/0x1bc) from [<c000fab4>] (kernel_thread_exit+0x0/0x8) Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: nand: fix scan_read_raw_oobDmitry Maluka2012-05-291-0/+1
| | | | | | | | | | | | | | | | | | | | It seems there is a bug in scan_read_raw_oob() in nand_bbt.c which should cause wrong functioning of NAND_BBT_SCANALLPAGES option. Artem: the patch did not apply and I had to amend it a bit. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: stable@kernel.org
| * mtd: nand: omap: add support for hardware BCH eccIvan Djelic2012-05-132-0/+285
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Two modes are supported: 4-bit and 8-bit error correction. Note that 4-bit mode is only confirmed to work on OMAP3630 ES 1.x, x >= 1. The OMAP3 GPMC hardware BCH engine computes remainder polynomials, it does not provide automatic error location and correction: this step is implemented using the BCH library. This implementation only protects page data, there is no support for protecting user-defined spare area bytes (this could be added with few modifications); therefore, it cannot be used with YAFFS2 or other similar filesystems that depend on oob storage. Before being stored to nand flash, hardware BCH ecc is adjusted so that an erased page has a valid ecc; thus allowing correction of bitflips in blank pages (also common on 4-bit devices). BCH correction mode is selected at runtime by setting platform data parameter 'ecc_opt' to value OMAP_ECC_BCH4_CODE_HW or OMAP_ECC_BCH8_CODE_HW. This code has been tested with mtd test modules, UBI and UBIFS on a BeagleBoard revC3 (OMAP3530 ES3.0 + Micron NAND 256MiB 1,8V 16-bit). Signed-off-by: Ivan Djelic <ivan.djelic@parrot.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: nand: check the return code of 'read_oob/read_oob_raw'Shmulik Ladkani2012-05-131-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | Apparently, there is an implementor of 'read_oob' which may return an error inidication (e.g. docg4_read_oob may return -EIO). Test the return value of 'read_oob/read_oob_raw', and if negative, propagate the error, so it's returned by the '_read_oob' interface. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw'Shmulik Ladkani2012-05-136-30/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | As of [mtd: nand: remove autoincrement 'sndcmd' code], the NAND_CMD_READ0 command is issued unconditionally. Thus, read_oob/read_oob_raw's 'sndcmd' argument is no longer needed, as well as their return code. Remove the 'sndcmd' parameter, and set the return code to 0. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: gpmi: add gpmi support for mx6qHuang Shijie2012-05-135-16/+45
| | | | | | | | | | | | | | | | | | add gpmi support for mx6q. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: gpmi: add device tree support to gpmi-nandHuang Shijie2012-05-133-69/+68
| | | | | | | | | | | | | | | | | | This patch just adds the DT support to gpmi-nand. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: nand: utilize oob_required parameterBrian Norris2012-05-131-2/+4
| | | | | | | | | | | | | | | | Don't read/write OOB if the caller doesn't require it. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: gpmi-nand: utilize oob_requested parameterBrian Norris2012-05-131-15/+18
| | | | | | | | | | | | | | | | | | Don't read OOB if the caller didn't request it. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: IFC NAND: utilize oob_required parameterBrian Norris2012-05-131-1/+2
| | | | | | | | | | | | | | | | | | Don't read OOB if the caller doesn't require it. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: eLBC NAND: utilize oob_required parameterBrian Norris2012-05-131-1/+2
| | | | | | | | | | | | | | | | | | Don't read OOB if the caller doesn't require it. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: nand: pass proper 'oob_required' parameterBrian Norris2012-05-131-6/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We now have an interface for notifying the nand_ecc_ctrl functions when OOB data must be returned to the upper layers and when it may be left untouched. This patch fills in the 'oob_required' parameter properly from nand_do_{read,write}_ops. When utilized properly in the lower layers, this parameter can improve performance and/or reduce complexity for NAND HW and SW that can simply avoid transferring the OOB data. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Acked-by: Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: nand: add 'oob_required' argument to NAND {read,write}_page interfacesBrian Norris2012-05-1314-67/+84
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | New NAND controllers can perform read/write via HW engines which don't expose OOB data in their DMA mode. To reflect this, we should rework the nand_chip / nand_ecc_ctrl interfaces that assume that drivers will always read/write OOB data in the nand_chip.oob_poi buffer. A better interface includes a boolean argument that explicitly tells the callee when OOB data is requested by the calling layer (for reading/writing to/from nand_chip.oob_poi). This patch adds the 'oob_required' parameter to each relevant {read,write}_page interface; all 'oob_required' parameters are left unused for now. The next patch will set the parameter properly in the nand_base.c callers, and follow-up patches will make use of 'oob_required' in some of the callee functions. Note that currently, there is no harm in ignoring the 'oob_required' parameter and *always* utilizing nand_chip.oob_poi, but there can be performance/complexity/design benefits from avoiding filling oob_poi in the common case. I will try to implement this for some drivers which can be ported easily. Note: I couldn't compile-test all of these easily, as some had ARCH dependencies. [dwmw2: Merge later 1/0 vs. true/false cleanup] Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Acked-by: Jiandong Zheng <jdzheng@broadcom.com> Acked-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: add read_byte support to plat_nandJohn Crispin2012-05-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | Lantiq SoCs have a External Bus Unit (EBU) that is used to attach MTD media. As we need to co-exist with PCI on the same bus, certain swapping settings must be applied. Similar to the NOR map driver we need to apply a fix to make NAND work. The easiest way is to use byte reads. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * OF: MTD: make plat_nand loadable from DTJohn Crispin2012-05-131-6/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch sets the of_match_table field inside plat_nand's platform_driver. We also add a struct mtd_part_parser_data pointer to make sure of_part parsing works. If an arch wants to support plat_nand via DT it needs to setup the platform_nand_data and hook it into the platform_device. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: nand: kill NAND_NO_AUTOINCR optionBrian Norris2012-05-1314-30/+11
| | | | | | | | | | | | | | | | No drivers use auto-increment NAND, so kill the NO_AUTOINCR option entirely. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: nand: remove autoincrement 'sndcmd' codeBrian Norris2012-05-131-37/+6
| | | | | | | | | | | | | | | | | | | | | | The NAND_NO_AUTOINCR option is always set, so we will kill the option and make "no autoincrement" the default behavior for nand_base.c. Thus, we should remove the code which decides whether or not to send the NAND_CMD_READ0 command. Instead, we unconditionally send the command. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: nandsim: remove autoincrement codeBrian Norris2012-05-131-25/+3
| | | | | | | | | | | | | | | | | | | | The NAND layer always has NAND_NO_AUTOINCR set, so we will never utilize the AUTOINCR code in nandsim. We will be removing the NAND_NO_AUTOINCR option soon, and so kill this code as well. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: driver _read() returns max_bitflips; mtd_read() returns -EUCLEANMike Dunn2012-05-132-6/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The drivers' _read() method, absent an error, returns a non-negative integer indicating the maximum number of bit errors that were corrected in any one region comprising an ecc step. MTD returns -EUCLEAN if this is >= bitflip_threshold, 0 otherwise. If bitflip_threshold is zero, the comparison is not made since these devices lack ECC and always return zero in the non-error case (thanks Brian)¹. Note that this is a subtle change to the driver interface. This and the preceding patches in this set were tested with ubi on top of the nandsim and docg4 devices, running the ubi test io_basic from mtd-utils. ¹ http://lists.infradead.org/pipermail/linux-mtd/2012-March/040468.html Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Brian Norris <computersforpeace@gmail.com> Ivan Djelic <ivan.djelic@parrot.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: nand: add sanity check of ecc strength to nand_scan_tail()Mike Dunn2012-05-131-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds sanity checks that ensure that drivers for controllers with hardware ECC set the 'strength' element in struct nand_ecc_ctrl. Also stylistic changes to the line that calculates strength for software ECC. This v2 simplifies the check. Thanks Brian!¹ ¹ http://lists.infradead.org/pipermail/linux-mtd/2012-April/040890.html Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: nand: read_page() returns max_bitflipsMike Dunn2012-05-1310-38/+82
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ecc.read_page() method for nand drivers is changed to return the maximum number of bitflips that were corrected on any one region covering an ecc step, This patch doesn't change what the nand code returns to mtd. This v2 includes the change to the fsl_ifc_nand driver requested by Scott¹. ¹ http://lists.infradead.org/pipermail/linux-mtd/2012-April/040883.html Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Acked-by (freescale changes): Scott Wood <scottwood@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: nand: fix incorrect ecc strength valuesMike Dunn2012-05-133-11/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a couple of ecc strength values for which I earlier made conservative guesses, but whose correct values were later determined¹ (thanks Ivan). Also sets strength for fsl_ifc_nand, which was merged to mainline after the original patch that set the strength for all drivers. ¹ http://lists.infradead.org/pipermail/linux-mtd/2012-March/040325.html Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: ecc_strength is at ecc step granularityMike Dunn2012-05-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | ecc_strength element of mtd_info will be the strength of one ecc step, not of the entire writesize, as was previously planned. This is the appropriate way because, as was pointed out¹, bit errors in excess of the strength of one step can cause a hard error if they all occur within the same ecc region. ¹ http://lists.infradead.org/pipermail/linux-mtd/2012-March/040313.html Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: nand: Add a NAND_CMD_STATUS when using write verificationBastian Hecht2012-05-131-0/+3
| | | | | | | | | | | | | | | | | | | | | | To make sure the NAND chip is properly programmed we need a status command before each page write. When CONFIG_MTD_NAND_VERIFY_WRITE=y this assumption is broken when writing multiple pages consecutively. This patch fixes this. Signed-off-by: Bastian Hecht <hechtb@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: mxc_nand: fix several sparse warnings about incorrect address spaceUwe Kleine-König2012-05-131-11/+11
| | | | | | | | | | | | Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: mxc_nand: implement device tree probingUwe Kleine-König2012-05-131-19/+95
| | | | | | | | | | | | | | | | This is tested on i.MX27. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: mxc_nand: put several more fields into devtype_dataUwe Kleine-König2012-05-131-36/+94
| | | | | | | | | | | | Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: mxc_nand: put callback for data correction into devtype structUwe Kleine-König2012-05-131-4/+6
| | | | | | | | | | | | | | | | This gets rid of one more nfc_is_vX(). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: mxc_nand: split chip_select function and put it into devtype structUwe Kleine-König2012-05-131-5/+28
| | | | | | | | | | | | Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: mxc_nand: put ecc layout into devtype structsUwe Kleine-König2012-05-131-11/+14
| | | | | | | | | | | | | | | | | | This commit makes problems on v1 and v2 regarding 4KiBpages more obvious. As I don't have a 4KiB flash handy I just keep the status quo. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: mxc_nand: split some functions to get rid of more nfc_is_vX()Uwe Kleine-König2012-05-131-29/+80
| | | | | | | | | | | | Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: mxc_nand: move function pointers to a per-SOC structUwe Kleine-König2012-05-131-66/+104
| | | | | | | | | | | | | | | | This prepares switching to platform ids and of-tree probing. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: mxc_nand: use a flag to detect if the mx21 quirk is necessaryUwe Kleine-König2012-05-131-49/+49
| | | | | | | | | | | | | | | | This gets rid of several instances of cpu_is_mx21() in the driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: mxc_nand: set owner field to prevent module unloading when in useUwe Kleine-König2012-05-131-0/+1
| | | | | | | | | | | | Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: nand: omap: fix race condition in omap_wait()Ivan Djelic2012-05-131-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a context switch occurs in function omap_wait() just before the while loop is entered, then upon return from context switch the timeout may already have elapsed: in that case, status is never read from NAND device, and omap_wait() returns an error. This failure has been experimentally observed during stress tests. This patch ensures a NAND status read is always performed before returning, as in the generic nand_wait() function. Signed-off-by: Ivan Djelic <ivan.djelic@parrot.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: fsmc_nand: Add clk_{un}prepare() supportViresh Kumar2012-05-131-7/+7
| | | | | | | | | | | | | | | | | | | | | | clk_{un}prepare is mandatory for platforms using common clock framework. Since this driver is used by SPEAr platform, which supports common clock framework, add clk_{un}prepare() support for it. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: omap2: fix resource leak in prefetch-busy pathGrazvydas Ignotas2012-05-131-1/+3
| | | | | | | | | | | | | | | | | | If prefetch engine is busy, current code "forgets" to call dma_unmap_single(), which results in a deadlock later, so add it. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: print out the page size and oob size after parsing out the nandHuang Shijie2012-05-131-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some not-supported nand chips may pass the current parsing code, and get the wrong page size and oob size. Sometimes, it's hard to notice that you get the wrong values, because there is no warning or error. So it's useful to print out the page size and oob size in the end of the parsing function. We can check these values with the datasheet of the nand chip as soon as possible. Artem: amend the print a bit Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: IFC NAND: Add support of ONFI NAND flashPrabhakar Kushwaha2012-05-131-6/+16
| | | | | | | | | | | | | | | | | | | | - Fix NAND_CMD_READID command for ONFI detect. - Add NAND_CMD_PARAM command to read the ONFI parameter page. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: use module_pci_driverAxel Lin2012-05-133-37/+3
| | | | | | | | | | | | | | | | | | This patch converts the drivers in drivers/mtd/* to use module_pci_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: gpmi: do not include the mxs.hHuang Shijie2012-05-131-4/+5
| | | | | | | | | | | | | | | | | | The mxs.h does not exit in the mx6q. So rewrite the __mxs_clrl()/__mxs_setl() and remove the mxs.h. Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: plat_nand: Add default partition parser to driverH Hartley Sweeten2012-05-131-2/+6
| | | | | | | | | | | | | | | | | | Use cmdlinepart as the default partition parser and allow the arch setup code to still use their own partition parsers. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | Merge tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-05-262-3/+21
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull arm-soc clock driver changes from Olof Johansson: "The new clock subsystem was merged in linux-3.4 without any users, this now moves the first three platforms over to it: imx, mxs and spear. The series also contains the changes for the clock subsystem itself, since Mike preferred to have it together with the platforms that require these changes, in order to avoid interdependencies and conflicts." Fix up trivial conflicts in arch/arm/mach-kirkwood/common.c (code removed in one branch, added OF support in another) and drivers/dma/imx-sdma.c (independent changes next to each other). * tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits) clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate(). clk: Provide dummy clk_unregister() SPEAr: Update defconfigs SPEAr: Add SMI NOR partition info in dts files SPEAr: Switch to common clock framework SPEAr: Call clk_prepare() before calling clk_enable SPEAr: clk: Add General Purpose Timer Synthesizer clock SPEAr: clk: Add Fractional Synthesizer clock SPEAr: clk: Add Auxiliary Synthesizer clock SPEAr: clk: Add VCO-PLL Synthesizer clock SPEAr: Add DT bindings for SPEAr's timer ARM i.MX: remove now unused clock files ARM: i.MX6: implement clocks using common clock framework ARM i.MX35: implement clocks using common clock framework ARM i.MX5: implement clocks using common clock framework ARM: Kirkwood: Replace clock gating ARM: Orion: Audio: Add clk/clkdev support ARM: Orion: PCIE: Add support for clk ARM: Orion: XOR: Add support for clk ARM: Orion: CESA: Add support for clk ...
| * \ Merge branch 'clk-next' of git://git.linaro.org/people/mturquette/linux into ↵Arnd Bergmann2012-05-161-0/+18
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | next/clock * 'clk-next' of git://git.linaro.org/people/mturquette/linux: clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate(). clk: Provide dummy clk_unregister() ARM: Kirkwood: Replace clock gating ARM: Orion: Audio: Add clk/clkdev support ARM: Orion: PCIE: Add support for clk ARM: Orion: XOR: Add support for clk ARM: Orion: CESA: Add support for clk ARM: Orion: SDIO: Add support for clk. ARM: Orion: NAND: Add support for clk, if there is one. ARM: Orion: EHCI: Add support for enabling clocks ARM: Orion: SATA: Add per channel clk/clkdev support. ARM: Orion: UART: Get the clock rate via clk_get_rate(). ARM: Orion: WDT: Add clk/clkdev support ARM: Orion: Eth: Add clk/clkdev support. ARM: Orion: SPI: Add clk/clkdev support. ARM: Orion: Add clocks using the generic clk infrastructure. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| | * | ARM: Orion: NAND: Add support for clk, if there is one.Andrew Lunn2012-05-081-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Not all orion platforms can gate the clock, but if it does exist, enable/disable it as appropriate. v2: Fix the name of the clkdev entry. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Mike Turquette <mturquette@linaro.org>
| * | | Merge branch 'imx/pinctrl' into imx/clockArnd Bergmann2012-05-141-0/+10
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/mmc/host/sdhci-esdhc-imx.c drivers/net/ethernet/freescale/fec.c drivers/spi/spi-imx.c drivers/tty/serial/imx.c This resolves dependencies between the pinctrl and clock changes in imx. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | | mtd mxc_nand: prepare/unprepare clockSascha Hauer2012-04-251-3/+3
| | |/ / | |/| | | | | | | | | | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | | | Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-05-221-3/+44
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull arm-soc board specific changes from Olof Johansson: "While we generally attempt to get rid of board specific files and replace them with device tree based descriptions, a lot of platforms have not come that far: In shmobile, we add two new board files because their recently started effort to add DT support has not proceeded enough to use it for all of the important hardware. In Kirkwood, we are adding support for new boards with a combination of DT and board file contents in multiple cases. pxa/mmp and imx are extending support for existing board files but not adding new ones." Fix up trivial conflicts in arch/arm/mach-{mmp/ttc_dkb.c,shmobile/{Kconfig,Makefile}} * tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (94 commits) ARM: shmobile: fix smp build ARM: kirkwood: Add support for RaidSonic IB-NAS6210/6220 using devicetree kirkwood: Add iconnect support orion/kirkwood: create a generic function for gpio led blinking kirkwood/orion: fix orion_gpio_set_blink ARM: kirkwood: Define DNS-320/DNS-325 NAND in fdt kirkwood: Allow nand to be configured via. devicetree mtd: Add orion_nand devicetree bindings ARM: kirkwood: Basic support for DNS-320 and DNS-325 ARM: mach-shmobile: Use DT_MACHINE for armadillo 800 eva ARM: mach-shmobile: Use DT_MACHINE for KZM9G ARM: pxa: hx4700: Add Synaptics NavPoint touchpad ARM: pxa: Use REGULATOR_SUPPLY macro ARM: mach-shmobile: kzm9g: enable SMP boot ARM: mach-shmobile: kzm9g: defconfig update ARM: mach-shmobile: kzm9g: add PCF8757 gpio-key ARM: mach-shmobile: kzm9g: add SDHI support ARM: mach-shmobile: kzm9g: add MMCIF support ARM: mach-shmobile: kzm9g: correct screen direction ARM: mach-shmobile: sh73a0.h: add GPIO_NR ...
OpenPOWER on IntegriCloud