summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/raw/nand_base.c
Commit message (Collapse)AuthorAgeFilesLines
...
* mtd: rawnand: Deprecate ->dev_ready() and ->waitfunc()Boris Brezillon2018-10-031-18/+18
| | | | | | | | Those hooks have been replaced by ->exec_op(). Move them to the nand_legacy struct. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Deprecate ->cmd_ctrl() and ->cmdfunc()Boris Brezillon2018-10-031-65/+73
| | | | | | | | Those hooks have been replaced by ->exec_op(). Move them to the nand_legacy struct. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Deprecate ->{read, write}_{byte, buf}() hooksBoris Brezillon2018-10-031-25/+25
| | | | | | | | All those hooks have been replaced by ->exec_op(). Move them to the nand_legacy struct. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Create a legacy struct and move ->IO_ADDR_{R, W} thereBoris Brezillon2018-10-031-6/+6
| | | | | | | | | | | | | | We regularly have new NAND controller drivers that are making use of fields/hooks that we want to get rid of but can't because of all the legacy drivers that we might break if we do. So, instead of removing those fields/hooks, let's move them to a sub-struct which is clearly documented as deprecated. We start with the ->IO_ADDR_{R,W] fields. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Do not treat !maxchips specially in nand_scan_with_ids()Boris Brezillon2018-10-031-8/+7
| | | | | | | | | | The only reason we were skipping nand_scan_ident() when maxchips == 0 was to make the docg4 to work. Now that this driver is gone we can remove this special case and return an error when maxchips is 0. Suggested-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Make maxchips an unsigned intBoris Brezillon2018-10-031-3/+4
| | | | | | | | There's no good reason to make maxchips a signed integer, since only positive values are valid. Make it an unsigned int. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Pass a nand_chip object nand_erase_nand()Boris Brezillon2018-10-031-5/+5
| | | | | | | | | | | Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the nand_erase_nand() helper. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Pass a nand_chip object to all nand_xxx_bbt() helpersBoris Brezillon2018-10-031-3/+3
| | | | | | | | | | | Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the nand_xxx_bbt() helpers. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Pass a nand_chip object to chip->setup_data_interface()Boris Brezillon2018-10-031-6/+3
| | | | | | | | | | | Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->setup_data_interface() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Pass a nand_chip object to chip->setup_read_retry()Boris Brezillon2018-10-031-7/+5
| | | | | | | | | | | Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->setup_read_retry() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Pass a nand_chip object to chip->{get, set}_features()Boris Brezillon2018-10-031-15/+6
| | | | | | | | | | | Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->{get,set}_features() hooks. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Pass a nand_chip object to chip->erase()Boris Brezillon2018-10-031-4/+3
| | | | | | | | | | | Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->erase() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Pass a nand_chip object to chip->waitfunc()Boris Brezillon2018-10-031-21/+8
| | | | | | | | | | | Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->waitfunc() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Pass a nand_chip object to chip->cmdfunc()Boris Brezillon2018-10-031-23/+23
| | | | | | | | | | | Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->cmdfunc() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Pass a nand_chip object to chip->dev_ready()Boris Brezillon2018-10-031-5/+5
| | | | | | | | | | | Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->dev_ready() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Pass a nand_chip object to chip->cmd_ctrl()Boris Brezillon2018-10-031-24/+23
| | | | | | | | | | | Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->cmd_ctrl() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Pass a nand_chip object to chip->block_xxx() hooksBoris Brezillon2018-10-031-8/+8
| | | | | | | | | | | Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all chip->block_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Pass a nand_chip object to chip->select_chip()Boris Brezillon2018-10-031-44/+42
| | | | | | | | | | | Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->select_chip() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Pass a nand_chip object to chip->write_xxx() hooksBoris Brezillon2018-10-031-24/+17
| | | | | | | | | | | Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all chip->write_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Pass a nand_chip object to chip->read_xxx() hooksBoris Brezillon2018-10-031-24/+17
| | | | | | | | | | | Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all chip->read_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Pass a nand_chip object to ecc->write_xxx() hooksBoris Brezillon2018-10-031-41/+33
| | | | | | | | | | | Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all ecc->write_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Pass a nand_chip object to ecc->read_xxx() hooksBoris Brezillon2018-10-031-39/+35
| | | | | | | | | | | | Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all ecc->read_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Pass a nand_chip object to ecc->correct()Boris Brezillon2018-10-031-5/+5
| | | | | | | | | | Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one. Now is ecc->correct()'s turn. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Pass a nand_chip object to ecc->calculate()Boris Brezillon2018-10-031-8/+8
| | | | | | | | | | Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one. Now is ecc->calculate()'s turn. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Pass a nand_chip object to ecc->hwctl()Boris Brezillon2018-10-031-7/+7
| | | | | | | | | | Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one. Now is ecc->hwctl()'s turn. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Pass a nand_chip object to nand_wait_ready()Boris Brezillon2018-10-031-6/+6
| | | | | | | | | | Let's make the raw NAND API consistent by patching all helpers to take a nand_chip object instead of an mtd_info one. Now is nand_wait_ready()'s turn. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Pass a nand_chip object to nand_release()Boris Brezillon2018-10-031-4/+4
| | | | | | | | | | Let's make the raw NAND API consistent by patching all helpers to take a nand_chip object instead of an mtd_info one. Now is nand_release()'s turn. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Pass a nand_chip object to nand_scan()Boris Brezillon2018-10-031-11/+10
| | | | | | | | | | Let's make the raw NAND API consistent by patching all helpers to take a nand_chip object instead of an mtd_info one. We start with nand_scan(). Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Get rid of the ->read_word() hookBoris Brezillon2018-09-041-14/+0
| | | | | | | | | Commit c120e75e0e7d ("mtd: nand: use read_oob() instead of cmdfunc() for bad block check") removed this only user of the ->read_word() method but kept the hook in place. Remove it now. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Add the nand_wait_rdy_op() helper and use itBoris Brezillon2018-09-041-5/+26
| | | | | | | | | | | | In order to make sure we use ->exec_op() to wait for chip readiness when it's available we provide an helper that does the selection between ->exec_op(), udelay(chip->chip_delay) and nand_wait_ready() based on what's implemented by the controller driver. We then use it in nand_wait_readrdy(). Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Add the nand_wait_readrdy() helper and use itBoris Brezillon2018-09-041-14/+14
| | | | | | | | | The logic to wait for chip readiness after a page read has been duplicated in nand_do_read_ops() and nand_do_read_oob(). Provide an helper that does the right thing and call it where appropriate. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: allocate dynamically ONFI parameters during detectionMiquel Raynal2018-08-011-20/+34
| | | | | | | | | | Now that it is possible to do dynamic allocations during the identification phase, convert the onfi_params structure (which is only needed with ONFI compliant chips) into a pointer that will be allocated only if needed. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
* mtd: rawnand: allocate model parameter dynamicallyMiquel Raynal2018-07-311-11/+41
| | | | | | | | | | Thanks to the migration of all drivers to use nand_scan() and the related nand_controller_ops, we can now allocate data during the detection phase. Let's do it first for the NAND model parameter which is allocated in nand_detect(). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
* mtd: rawnand: do not export nand_scan_[ident|tail]() anymoreMiquel Raynal2018-07-311-7/+9
| | | | | | | | | | | | | | | | | | | Both nand_scan_ident() and nand_scan_tail() helpers used to be called directly from controller drivers that needed to tweak some ECC-related parameters before nand_scan_tail(). This separation prevented dynamic allocations during the phase of NAND identification, which was inconvenient. All controller drivers have been moved to use nand_scan(), in conjunction with the chip->ecc.[attach|detach]_chip() hooks that actually do the required tweaking sequence between both ident/tail calls, allowing programmers to use dynamic allocation as they need all across the scanning sequence. Declare nand_scan_[ident|tail]() statically now. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
* mtd: rawnand: do not execute nand_scan_ident() if maxchips is zeroMiquel Raynal2018-07-311-4/+8
| | | | | | | | | | | | Some driver (eg. docg4) will need to handle themselves the identification phase. As part of the migration to use nand_scan() everywhere (which will unconditionnaly call nand_scan_ident()), we add a condition at the start of nand_scan_with_ids() to jump over nand_scan_ident() if the maxchips parameters is zero, meaning that the driver does not want the core to handle this phase. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
* mtd: rawnand: add hooks that may be called during nand_scan()Miquel Raynal2018-07-311-2/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to remove the limitation that forbids dynamic allocation in nand_scan_ident(), we must create a path that will be the same for all controller drivers. The idea is to use nand_scan() instead of the widely used nand_scan_ident()/nand_scan_tail() couple. In order to achieve this, controller drivers will need to adjust some parameters between these two functions depending on the NAND chip wired on them. This takes the form of two new hooks (->{attach,detach}_chip()) that are placed in a new nand_controller_ops structure, which is then attached to the nand_controller object at driver initialization time. ->attach_chip() is called between nand_scan_ident() and nand_scan_tail(), and ->detach_chip() is called in the error path of nand_scan() and in nand_cleanup(). Note that some NAND controller drivers don't have a dedicated nand_controller object and instead rely on the default/dummy one embedded in nand_chip. If you're in this case and still want to initialize the controller ops, you'll have to manipulate chip->dummy_controller directly. Last but not least, it's worth mentioning that we plan to move some of the controller related hooks placed in nand_chip into nand_controller_ops to make the separation between NAND chip and NAND controller methods clearer. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Boris Brezillon <boris.brezillon@bootlin.com>
* mtd: rawnand: better name for the controller structureMiquel Raynal2018-07-311-2/+2
| | | | | | | | | | | | | | | | | | | | In the raw NAND core, a NAND chip is described by a nand_chip structure, while a NAND controller is described with a nand_hw_control structure which is not very meaningful. Rename this structure nand_controller. As the structure gets renamed, it is logical to also rename the core function initializing it from nand_hw_control_init() to nand_controller_init(). Lastly, the 'hwcontrol' entry of the nand_chip structure is not meaningful neither while it has the role of fallback when no controller structure is provided by the driver (the controller driver is dumb and can only control a single chip). Thus, it is renamed dummy_controller. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Boris Brezillon <boris.brezillon@bootlin.com>
* mtd: rawnand: Remove unused caller_is_module() definitionBoris Brezillon2018-07-311-12/+0
| | | | | | | | | Commit 260e89a6e0d6 ("mtd: core: tone down suggestion that dev.parent should be set") removed the only user of caller_is_module() but forgot to remove the definition itself. Let's remove it now. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: make subop helpers return unsigned valuesMiquel Raynal2018-07-311-22/+22
| | | | | | | | | | | | | A report from Colin Ian King pointed a CoverityScan issue where error values on these helpers where not checked in the drivers. These helpers can error out only in case of a software bug in driver code, not because of a runtime/hardware error. Hence, let's WARN_ON() in this case and return 0 which is harmless anyway. Fixes: 8878b126df76 ("mtd: nand: add ->exec_op() implementation") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Expose _notsupp() helpers for raw page accessorsBoris Brezillon2018-07-191-0/+33
| | | | | | | | | | Some implementations simply can't disable their ECC engine. Expose helpers returning -ENOTSUPP so that the caller knows that raw accesses are not supported instead of silently falling back to non-raw accessors. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Kill the chip->scan_bbt() hookBoris Brezillon2018-07-181-8/+1
| | | | | | | | | None of the existing drivers are overloading the ->scan_bbt() method, let's get rid of it and replace calls to ->scan_bbt() by nand_create_bbt() ones. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Rename nand_default_bbt() into nand_create_bbt()Boris Brezillon2018-07-181-0/+5
| | | | | | | | | | | Rename nand_default_bbt() into nand_create_bbt() and pass it a nand_chip object to prepare removal of the chip->scan_bbt() hook. We add a temporary nand_default_bbt() wrapper which will be dropped after the removal of ->scan_bbt(). Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: provide only single helper function for ECC confAbhishek Sahu2018-07-181-24/+15
| | | | | | | | | | | | | | | | | | | | Function nand_ecc_choose_conf() will be help for all the cases, so other helper functions can be made static. nand_check_ecc_caps(): Invoke nand_ecc_choose_conf() with both chip->ecc.size and chip->ecc.strength value set. nand_maximize_ecc(): Invoke nand_ecc_choose_conf() with NAND_ECC_MAXIMIZE flag. nand_match_ecc_req(): Invoke nand_ecc_choose_conf() with either chip->ecc.size or chip->ecc.strength value set and without NAND_ECC_MAXIMIZE flag. CC: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: helper function for setting up ECC configurationAbhishek Sahu2018-07-181-0/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 2c8f8afa7f92 ("mtd: nand: add generic helpers to check, match, maximize ECC settings") provides generic helpers which drivers can use for setting up ECC parameters. Since same board can have different ECC strength nand chips so following is the logic for setting up ECC strength and ECC step size, which can be used by most of the drivers. 1. If both ECC step size and ECC strength are already set (usually by DT) then just check whether this setting is supported by NAND controller. 2. If NAND_ECC_MAXIMIZE is set, then select maximum ECC strength supported by NAND controller. 3. Otherwise, try to match the ECC step size and ECC strength closest to the chip's requirement. If available OOB size can't fit the chip requirement then select maximum ECC strength which can be fit with available OOB size. This patch introduces nand_ecc_choose_conf function which calls the required helper functions for the above logic. The drivers can use this single function instead of calling the 3 helper functions individually. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: add defines for ONFI version bitsChris Packham2018-07-021-5/+5
| | | | | | | | | Add defines for the ONFI version bits and use them in nand_flash_detect_onfi(). Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: add manufacturer fixup for ONFI parameter pageChris Packham2018-07-021-0/+4
| | | | | | | | | | This is called after the ONFI parameter page checksum is verified and allows us to override the contents of the parameter page. Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: add an option to specify NAND chip as a boot deviceStefan Agner2018-07-021-0/+3
| | | | | | | | | | | Allow to define a NAND chip as a boot device. This can be helpful for the selection of the ECC algorithm and strength in case the boot ROM supports only a subset of controller provided options. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: add Reed-Solomon error correction algorithmStefan Agner2018-07-021-0/+1
| | | | | | | | | Add Reed-Solomon (RS) to the enumeration of ECC algorithms. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: fix return value check for bad block statusAbhishek Sahu2018-06-221-1/+1
| | | | | | | | | | | | | | Positive return value from read_oob() is making false BAD blocks. For some of the NAND controllers, OOB bytes will be protected with ECC and read_oob() will return number of bitflips. If there is any bitflip in ECC protected OOB bytes for BAD block status page, then that block is getting treated as BAD. Fixes: c120e75e0e7d ("mtd: nand: use read_oob() instead of cmdfunc() for bad block check") Cc: <stable@vger.kernel.org> Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
* Merge tag 'mtd/for-4.18' of git://git.infradead.org/linux-mtdLinus Torvalds2018-06-081-27/+62
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MTD updates from Boris Brezillon: "Core changes: - Add a sysfs attribute to expose available OOB size Driver changes: - Remove HAS_DMA dependency on various drivers - Use dev_get_drvdata() instead of platform_get_drvdata() in docg3 - Replace msleep by usleep_range() in the dataflash driver - Avoid VLA usage in nftl layers - Remove useless .owner assignment in pismo - Fix various issues in the CFI driver - Improve TRX partition handling expose a DT compat for this part parser - Clarify OFFSET_CONTINUOUS meaning NAND core changes: - Add Miquel as a NAND maintainer - Add access mode to the nand_page_io_req struct - Fix kernel-doc in rawnand.h - Support bit-wise majority to recover from corrupted ONFI parameter pages - Stop checking FAIL bit after a SET_FEATURES, as documented in the ONFI spec Raw NAND Driver changes: - Fix and cleanup the error path of many NAND controller drivers - GPMI: + Cleanup/simplification of a few aspects in the driver + Take ECC setup specified in the DT into account - sunxi: remove support for GPIO-based R/B polling - MTK: + Use of_device_get_match_data() instead of of_match_device() + Add an entry in MAINTAINERS for this driver + Fix nand-ecc-step-size and nand-ecc-strength description in the DT bindings doc - fsl_ifc: fix ->cmdfunc() to read more than one ONFI parameter page OneNAND driver changes: - samsung: use dev_get_drvdata() instead of platform_get_drvdata() SPI NOR core changes: - Add support for a bunch of SPI NOR chips - Clear EAR reg when switching to 3-byte addressing mode on Winbond chips SPI NOR controller driver changes: - cadence: Add DMA support for direct mode reads - hisi: Prefix a few functions with hisi_ - intel: + Mark the driver as "dangerous" in Kconfig + Fix atomic sequence handling + Pass a 40us delay (instead of 0us) to readl_poll_timeout() - fsl: + fix a typo in a function name + add support for IP variants embedded in the ls2080a and ls1080a SoCs - stm32: request exclusive control of the reset line" * tag 'mtd/for-4.18' of git://git.infradead.org/linux-mtd: (66 commits) mtd: nand: Pass mode information to nand_page_io_req mtd: cfi_cmdset_0002: Change erase one block to enable XIP once mtd: cfi_cmdset_0002: Change erase functions to check chip good only mtd: cfi_cmdset_0002: Change erase functions to retry for error mtd: cfi_cmdset_0002: Change definition naming to retry write operation mtd: cfi_cmdset_0002: Change write buffer to check correct value mtd: cmdlinepart: Update comment for introduction of OFFSET_CONTINUOUS mtd: bcm47xxpart: add of_match_table with a new DT binding dt-bindings: mtd: document Broadcom's BCM47xx partitions mtd: spi-nor: Add support for EN25QH32 mtd: spi-nor: Add support for is25wp series chips mtd: spi-nor: Add Winbond w25q32jv support mtd: spi-nor: fsl-quadspi: add support for ls2080a/ls1080a mtd: spi-nor: stm32-quadspi: explicitly request exclusive reset control mtd: spi-nor: intel: provide a range for poll_timout mtd: spi-nor: fsl-quadspi: fix api naming typo _init_ahb_read mtd: spi-nor: intel-spi: Explicitly mark the driver as dangerous in Kconfig mtd: spi-nor: intel-spi: Fix atomic sequence handling mtd: rawnand: Do not check FAIL bit when executing a SET_FEATURES op mtd: rawnand: use bit-wise majority to recover the ONFI param page ...
OpenPOWER on IntegriCloud