summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/card
Commit message (Collapse)AuthorAgeFilesLines
* mmc: block: Remove unnecessary temporary variableTobias Klauser2015-01-281-3/+1
| | | | | | | | Directly return the result of mmc_blk_alloc_req() instead of assigning and returning the variable md. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: block: fix format string warningAsaf Vertz2015-01-211-1/+1
| | | | | | | | | Fixed the following warning (reported by cppcheck): [drivers/mmc/card/block.c:2149]: (warning) %d in format string (no. 1) requires 'int' but the argument type is 'unsigned int'. Signed-off-by: Asaf Vertz <asaf.vertz@tandemg.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: core: always check status after resetJohan Rudholm2015-01-191-11/+7
| | | | | | | | | Always check if the card is alive after a successful reset. This allows us to remove mmc_hw_reset_check(), leaving mmc_hw_reset() as the only card reset interface. Signed-off-by: Johan Rudholm <johanru@axis.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: queue: Improve error handling during allocation of bounce buffersBhuvanesh Surachari2014-12-051-7/+9
| | | | | | | | | | | Allocation of previous bounce buffer in mmc_init_queue when the current bounce buffer allocation fails was leading to a crash later in __blk_segment_map_sg. Error handling is improved by allocating previous bounce buffer only if the current bounce buffer allocation succeeds. Signed-off-by: Bhuvanesh Surachari <bhuvanesh_surachari@mentor.com> Signed-off-by: Harish Jenny K N <harish_kandiga@mentor.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: block: Increase max_devicesBen Hutchings2014-11-261-5/+8
| | | | | | | | | | | | | | | Currently the driver imposes a limit of 256 total minor numbers, apparently based on the historic Unix/Linux limit. This is quite restrictive, particularly if we raise the maximum number of partitions per card to 256 to match sd. In order to make the full minor number space available we would have to replace the static dev_use and name_use arrays with struct ida. But we can at least allow use of 256 cards rather than just 256 minors, with only a small change. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: mmc_test: Extend "Badly aligned" tests for 8-byte alignmentAdrian Hunter2014-11-101-4/+6
| | | | | | | | | The "Badly aligned" tests, test reading/writing with alignments of 1,2 and 3. SDHCI now has 64-bit ADMA which has 8-byte alignment, so extend the tests to test up to 7. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: block: Use mmc_get_ext_csd() instead of mmc_send_ext_csd()Ulf Hansson2014-11-101-11/+2
| | | | | | | By using mmc_get_ext_csd() in favor of mmc_send_ext_csd, we decrease code duplication. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: block: Use dev_set|get_drvdata()Ulf Hansson2014-11-101-11/+10
| | | | | | | | | | In most of the cases mmc_get|set_drvdata() didn't simplify code, which should be the primary reason for such macros. Let's remove them and convert to the common device_driver macros, dev_set|get_drvdata() instead. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: core: Convert mmc_driver to device_driverUlf Hansson2014-11-102-19/+25
| | | | | | | | | | | The struct mmc_driver adds an extra layer on top of the struct device_driver. That would be fine, if there were a good reason, but that's not the case. Let's simplify code by converting to the common struct device_driver instead and thus also removing superfluous overhead. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: core: Convert the mmc_driver to use the modern PM opsUlf Hansson2014-11-101-8/+8
| | | | | | | Instead of having specific mmc system PM callbacks for the mmc driver, let's convert to use the common ones. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: block: add newline to sysfs display of force_roBaruch Siach2014-11-101-1/+1
| | | | | | | | | Make force_ro consistent with other sysfs entries. Fixes: 371a689f64b0d ('mmc: MMC boot partitions support') Cc: Andrei Warkentin <andrey.warkentin@gmail.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* Merge branch 'for-3.18/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds2014-10-181-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull block layer driver update from Jens Axboe: "This is the block driver pull request for 3.18. Not a lot in there this round, and nothing earth shattering. - A round of drbd fixes from the linbit team, and an improvement in asender performance. - Removal of deprecated (and unused) IRQF_DISABLED flag in rsxx and hd from Michael Opdenacker. - Disable entropy collection from flash devices by default, from Mike Snitzer. - A small collection of xen blkfront/back fixes from Roger Pau Monné and Vitaly Kuznetsov" * 'for-3.18/drivers' of git://git.kernel.dk/linux-block: block: disable entropy contributions for nonrot devices xen, blkfront: factor out flush-related checks from do_blkif_request() xen-blkback: fix leak on grant map error path xen/blkback: unmap all persistent grants when frontend gets disconnected rsxx: Remove deprecated IRQF_DISABLED block: hd: remove deprecated IRQF_DISABLED drbd: use RB_DECLARE_CALLBACKS() to define augment callbacks drbd: compute the end before rb_insert_augmented() drbd: Add missing newline in resync progress display in /proc/drbd drbd: reduce lock contention in drbd_worker drbd: Improve asender performance drbd: Get rid of the WORK_PENDING macro drbd: Get rid of the __no_warn and __cond_lock macros drbd: Avoid inconsistent locking warning drbd: Remove superfluous newline from "resync_extents" debugfs entry. drbd: Use consistent names for all the bi_end_io callbacks drbd: Use better variable names
| * block: disable entropy contributions for nonrot devicesMike Snitzer2014-10-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clear QUEUE_FLAG_ADD_RANDOM in all block drivers that set QUEUE_FLAG_NONROT. Historically, all block devices have automatically made entropy contributions. But as previously stated in commit e2e1a148 ("block: add sysfs knob for turning off disk entropy contributions"): - On SSD disks, the completion times aren't as random as they are for rotational drives. So it's questionable whether they should contribute to the random pool in the first place. - Calling add_disk_randomness() has a lot of overhead. There are more reliable sources for randomness than non-rotational block devices. From a security perspective it is better to err on the side of caution than to allow entropy contributions from unreliable "random" sources. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* | mmc: Convert pr_warning to pr_warnJoe Perches2014-09-243-11/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | Use the much more common pr_warn instead of pr_warning. Other miscellanea: o Coalesce formats o Realign arguments o Remove extra spaces when coalescing formats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: block: change stop errors to infoJohan Rudholm2014-09-191-1/+1
| | | | | | | | | | | | | | | | | | Stop command errors are not fatal to the transfer since we make sure that the card returns to the transfer state and check the card status. Change an unnecessary error to an info. Signed-off-by: Johan Rudholm <johanru@axis.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: card: Prevent partition scan for the eMMC boot areasUlf Hansson2014-09-091-1/+1
| | | | | | | | | | | | | | | | It seems very unlikely that eMMC devices would hold a standard partitiontable in one of it's boot areas. Therefore, let's prevent them from being scanned. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: remove MMC_CAP2_NO_MULTI_READ flagsKuninori Morimoto2014-09-091-5/+0
| | | | | | | | | | | | | | | | | | Now, mmc framework uses multi_io_quirk for I/O HW bug workaround. MMC_CAP2_NO_MULTI_READ flag is no longer needed Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: Add .multi_io_quirk callback for multi I/O HW bugKuninori Morimoto2014-09-091-0/+10
|/ | | | | | | | | | | | | | | | Historically, we have been using MMC_CAP* to handle host HW issues and currently the block layer uses MMC_CAP2_NO_MULTI_READ flag for a multi I/O HW bug workaround. There are a few tweaks needed to make MMC_CAP2_NO_MULTI_READ suite all situations. Therefore let's add an optional host ops callback to enable host drivers to return the number of blocks it allows per request. In a future patch and when host drivers have converted to the new callback, MMC_CAP2_NO_MULTI_READ shall be removed. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: Do not advertise secure discard if it is blacklistedLukas Czerner2014-07-261-3/+3
| | | | | | | | | | | | | | | | | | Currently when the device secure discard implementation is blacklisted (MMC_QUIRK_SEC_ERASE_TRIM_BROKEN quirk is set) instead of secure discard we're going to do normal discard, which is wrong. When the secure discard is known to be broken we should just disallow it entirely and not advertise this functionality to the user. Fix it. Also move mmc_fixup_device() in from of mmc_blk_alloc() so we can get quirks set before we attempt to set queue information. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* Merge tag 'mmc-updates-for-3.15-rc1' of ↵Linus Torvalds2014-04-091-66/+115
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC updates from Chris Ball: "MMC highlights for 3.15: Core: - CONFIG_MMC_UNSAFE_RESUME=y is now default behavior - DT bindings for SDHCI UHS, eMMC HS200, high-speed DDR, at 1.8/1.2V - Add GPIO descriptor based slot-gpio card detect API Drivers: - dw_mmc: Refactor SOCFPGA support as a variant inside dw_mmc-pltfm.c - mmci: Support HW busy detection on ux500 - omap: Support MMC_ERASE - omap_hsmmc: Support MMC_PM_KEEP_POWER, MMC_PM_WAKE_SDIO_IRQ, (a)cmd23 - rtsx: Support pre-req/post-req async - sdhci: Add support for Realtek RTS5250 controllers - sdhci-acpi: Add support for 80860F16, fix 80860F14/SDIO card detect - sdhci-msm: Add new driver for Qualcomm SDHCI chipset support - sdhci-pxav3: Add support for Marvell Armada 380 and 385 SoCs" * tag 'mmc-updates-for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (102 commits) mmc: sdhci-acpi: Intel SDIO has broken card detect mmc: sdhci-pxav3: add support for the Armada 38x SDHCI controller mmc: sdhci-msm: Add platform_execute_tuning implementation mmc: sdhci-msm: Initial support for Qualcomm chipsets mmc: sdhci-msm: Qualcomm SDHCI binding documentation sdhci: only reprogram retuning timer when flag is set mmc: rename ARCH_BCM to ARCH_BCM_MOBILE mmc: sdhci: Allow for irq being shared mmc: sdhci-acpi: Add device id 80860F16 mmc: sdhci-acpi: Fix broken card detect for ACPI HID 80860F14 mmc: slot-gpio: Add GPIO descriptor based CD GPIO API mmc: slot-gpio: Split out CD IRQ request into a separate function mmc: slot-gpio: Record GPIO descriptors instead of GPIO numbers Revert "dts: socfpga: Add support for SD/MMC on the SOCFPGA platform" mmc: sdhci-spear: use generic card detection gpio support mmc: sdhci-spear: remove support for power gpio mmc: sdhci-spear: simplify resource handling mmc: sdhci-spear: fix platform_data usage mmc: sdhci-spear: fix error handling paths for DT mmc: sdhci-bcm-kona: fix build errors when built-in ...
| * mmc: block: Fixup busy detection while invoking stop cmd at recoveryUlf Hansson2014-02-231-28/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When sending a stop command at the recovery path, use a R1B response when the failing data request are a WRITE. Thus we also care about the busy detection completion in this case. For a failing READ request, we use a R1 response for the stop command, since we don't need to care about busy detection in this case. To align behavior between hosts supporting MMC_CAP_WAIT_WHILE_BUSY and those who are not, we add a CMD13 polling method for the card's status. We also respect whether the host has specified the max_busy_timeout, which means we may fallback to CMD13 polling if the timeout is greater than what the host are able to support. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
| * mmc: block: Respect hw busy detection in card_busy_detect()Ulf Hansson2014-02-231-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | Currently for write request we don't trust the hw busy detection to be fully handled by host, thus we also poll the card's status until we see it's gets out of the busy state. Still there are scenarios where it will a benefit to trust the hw busy detection done by the host, since no additional polling is needed. Let's prepare card_busy_detect() to be able to handle this. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
| * mmc: block: Implement card_busy_detect() for busy detectionUlf Hansson2014-02-231-35/+47
| | | | | | | | | | | | | | | | | | | | To complete a data write request we poll for the card's status register by sending CMD13. The are other scenarios when this polling method are needed, which is why we here moves this code to it's own function. No functional change. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
| * mmc: block: Use R1 responses for stop cmds for read requestsUlf Hansson2014-02-231-1/+6
| | | | | | | | | | | | | | | | | | While using open ended transmission and thus ending the transfer by sending a stop command, we shall use R1B only for writes and R1 shall be used for reads. Previously R1B were used in both cases. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
| * mmc: card: Remove host cap MMC_CAP2_SANITIZEUlf Hansson2014-02-131-2/+1
| | | | | | | | | | | | | | | | There is no need for keeping a host cap for MMC_CAP2_SANITIZE, instead we just make the feature default available. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
* | Fix uses of dma_max_pfn() when converting to a limiting addressRussell King2014-02-171-1/+1
|/ | | | | | | | | | | We must use a 64-bit for this, otherwise overflowed bits get lost, and that can result in a lower than intended value set. Fixes: 8e0cb8a1f6ac ("ARM: 7797/1: mmc: Use dma_max_pfn(dev) helper for bounce_limit calculations") Fixes: 7d35496dd982 ("ARM: 7796/1: scsi: Use dma_max_pfn(dev) helper for bounce_limit calculations") Tested-Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* mmc: fix host release issue after discard operationRay Jui2014-01-131-3/+4
| | | | | | | | | | | | | | | | | | Under function mmc_blk_issue_rq, after an MMC discard operation, the MMC request data structure may be freed in memory. Later in the same function, the check of req->cmd_flags & MMC_REQ_SPECIAL_MASK is dangerous and invalid. It causes the MMC host not to be released when it should. This patch fixes the issue by marking the special request down before the discard/flush operation. Reported by: Harold (SoonYeal) Yang <haroldsy@broadcom.com> Signed-off-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* Merge tag 'mmc-updates-for-3.13-rc1' of ↵Linus Torvalds2013-11-181-2/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC updates from Chris Ball: "MMC highlights for 3.13: Core: - Improve runtime PM support, remove mmc_{suspend,resume}_host(). - Add MMC_CAP_RUNTIME_RESUME, for delaying MMC resume until we're outside of the resume sequence (in runtime_resume) to decrease system resume time. Drivers: - dw_mmc: Support HS200 mode. - sdhci-eshdc-imx: Support SD3.0 SDR clock tuning, DDR on IMX6. - sdhci-pci: Add support for Intel Clovertrail and Merrifield" * tag 'mmc-updates-for-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (108 commits) mmc: wbsd: Silence compiler warning mmc: core: Silence compiler warning in __mmc_switch mmc: sh_mmcif: Convert to clk_prepare|unprepare mmc: sh_mmcif: Convert to PM macros when defining dev_pm_ops mmc: dw_mmc: exynos: Revert the sdr_timing assignment mmc: sdhci: Avoid needless loop while handling SDIO interrupts in sdhci_irq mmc: core: Add MMC_CAP_RUNTIME_RESUME to resume at runtime_resume mmc: core: Improve runtime PM support during suspend/resume for sd/mmc mmc: core: Remove redundant mmc_power_up|off at runtime callbacks mmc: Don't force card to active state when entering suspend/shutdown MIPS: db1235: Don't use MMC_CLKGATE mmc: core: Remove deprecated mmc_suspend|resume_host APIs mmc: mmci: Move away from using deprecated APIs mmc: via-sdmmc: Move away from using deprecated APIs mmc: tmio: Move away from using deprecated APIs mmc: sh_mmcif: Move away from using deprecated APIs mmc: sdricoh_cs: Move away from using deprecated APIs mmc: rtsx: Remove redundant suspend and resume callbacks mmc: wbsd: Move away from using deprecated APIs mmc: pxamci: Remove redundant suspend and resume callbacks ...
| * mmc: Don't force card to active state when entering suspend/shutdownUlf Hansson2013-10-301-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By adding a card state that records if it is suspended or resumed, we can accept asyncronus suspend/resume requests for the mmc and sd bus_ops. MMC_CAP_AGGRESSIVE_PM, will at request inactivity through the runtime bus_ops callbacks, execute a suspend of the the card. In the state were this has been done, we can receive a suspend request for the mmc bus, which for sd and mmc forced the card to active state by a pm_runtime_get_sync. In other words, the card was resumed and then immediately suspended again, completely unnecessary. Since the suspend/resume bus_ops callbacks for sd and mmc are now capable of handling asynchronous requests, we no longer need to force the card to active state before executing suspend. Evidently preventing the above sequence for MMC_CAP_AGGRESSIVE_PM. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* | ARM: 7797/1: mmc: Use dma_max_pfn(dev) helper for bounce_limit calculationsSantosh Shilimkar2013-10-311-1/+2
|/ | | | | | | | | | | | | DMA bounce limit is the maximum direct DMA'able memory beyond which bounce buffers has to be used to perform dma operations. MMC queue layr relies on dma_mask but its calculation is based on max_*pfn which don't have uniform meaning across architectures. So make use of dma_max_pfn() which is expected to return the DMAable maximum pfn value across architectures. Cc: Chris Ball <cjb@laptop.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* mmc: fix null pointer use in mmc_blk_remove_reqFranck Jullien2013-08-241-1/+1
| | | | | | | | | | | A previous commit (fdfa20c1631210d0) reordered the shutdown sequence in mmc_blk_remove_req. However, mmc_cleanup_queue is now called before we get the card pointer, and mmc_cleanup_queue sets mq->card to NULL. This patch moves the card pointer assignment before mmc_cleanup_queue. Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: mmc_test: replace strict_strtol() with kstrtol_from_user()Jingoo Han2013-08-241-10/+4
| | | | | | | | | | | The usage of strict_strtol() is not preferred, because strict_strtol() is obsolete. Thus, kstrtol() should be used. Also, both kstrtol() and copy_from_user() can be replaced with kstrtol_from_user() to make the code simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: block: fix a bug of error handling in MMC driverKOBAYASHI Yoshitake2013-08-241-3/+42
| | | | | | | | | | | | | | | | | | | Current MMC driver doesn't handle generic error (bit19 of device status) in write sequence. As a result, write data gets lost when generic error occurs. For example, a generic error when updating a filesystem management information causes a loss of write data and corrupts the filesystem. In the worst case, the system will never boot. This patch includes the following functionality: 1. To enable error checking for the response of CMD12 and CMD13 in write command sequence 2. To retry write sequence when a generic error occurs Messages are added for v2 to show what occurs. Signed-off-by: KOBAYASHI Yoshitake <yoshitake.kobayashi@toshiba.co.jp> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: core: Handle card shutdown from mmc_busUlf Hansson2013-06-272-2/+18
| | | | | | | | | | | | Considering shutdown of the card, the responsibility to initate this sequence shall be driven from the mmc_bus. This patch enables the mmc_bus to handle this sequence properly. A new .shutdown callback is added in the mmc_driver struct which is used to shutdown the blk device. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: card: fixing an false identification of SANITIZE commandYaniv Gardi2013-06-271-1/+2
| | | | | | | | | | | | | | | Inside the routine mmc_blk_ioctl_cmd() the sanitize command is identified according to the value of bits 16-23 of the argument. but what happens if a different command is sent, and only by chance, bits 16-23 contain the value of SANITIZE command ? In that case a SANITIZE command will be falsely identified. In order to prevent such a case, the condition is expanded and now it also checks the opcode itself, and verifies that it is an MMC_SWITCH opcode. Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: reordered shutdown sequence in mmc_bld_remove_reqPaul Taysom2013-06-271-6/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We had a multi-partition SD-Card with two ext2 file systems. The partition table was getting overwritten by a race between the card removal and the unmount of the 2nd ext2 partition. What was observed: 1. Suspend/resume would call to remove the device. The clearing of the device information is done asynchronously. 2. A request is made to unmount the file system (this is called after the removal has started). 3. The remapping table was cleared by the asynchronous part of the device removal. 4. A write request to the super block (block 0 of the partition) was sent down and instead of being remapped to the partition offset, it was remapped to block 0 of the device which is where the partition table is located. 5. Write was queued and written resulting in the overwriting of the partition table with the ext2 super block. 6. The mmc_queue is cleaned up. The mmc card device driver used to access SD cards, was calling del_gendisk before calling mmc_cleanup-queue. The comment in the mmc_blk_remove_req code indicated that it expected del_gendisk to block all further requests from being queued but it doesn't. The mmc driver uses the presences of the mmc_queue to determine if the request should be queued. The fix was to clean up the mmc_queue before the rest of the the delete partition code is called. This prevents the overwriting of the partition table. However, the umount gets an error trying to write the super block. The umount should be issued before the device is removed but that is not always possible. The umount is still needed to cleanup other data structures. Addresses the problem described in http://crbug.com/240815 Signed-off-by: Paul Taysom <taysom@chromium.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: block: Enable runtime pm for mmc blkdeviceUlf Hansson2013-05-261-6/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | Once the mmc blkdevice is being probed, runtime pm will be enabled. By using runtime autosuspend, the power save operations can be done when request inactivity occurs for a certain time. Right now the selected timeout value is set to 3 s. Obviously this value will likely need to be configurable somehow since it needs to be trimmed depending on the power save algorithm. For SD-combo cards, we are still leaving the enablement of runtime PM to the SDIO init sequence since it depends on the capabilities of the SDIO func driver. Moreover, when the blk device is being suspended, we make sure the device will be runtime resumed. The reason for doing this is that we want the host suspend sequence to be unaware of any runtime power save operations done for the card in this phase. Thus it can just handle the suspend as the card is fully powered from a runtime perspective. Finally, this patch prepares to make it possible to move BKOPS handling into the runtime callbacks for the mmc bus_ops. Thus IDLE BKOPS can be accomplished. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: card: Adding support for sanitize in eMMC 4.5Maya Erez2013-05-262-22/+48
| | | | | | | | | | | | | | | | | | | The sanitize support is added as a user-app ioctl call, and was removed from the block-device request, since its purpose is to be invoked not via File-System but by a user. This feature deletes the unmap memory region of the eMMC card, by writing to a specific register in the EXT_CSD. unmap region is the memory region that was previously deleted (by erase, trim or discard operation). In order to avoid timeout when sanitizing large-scale cards, the timeout for sanitize operation is 240 seconds. Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* block_device_operations->release() should return voidAl Viro2013-05-071-2/+1
| | | | | | | | | The value passed is 0 in all but "it can never happen" cases (and those only in a couple of drivers) *and* it would've been lost on the way out anyway, even if something tried to pass something meaningful. Just don't bother. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* Merge tag 'mmc-updates-for-3.10-rc1' of ↵Linus Torvalds2013-05-043-5/+10
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC update from Chris Ball: "MMC highlights for 3.10: Core: - Introduce MMC_CAP2_NO_PRESCAN_POWERUP to allow skipping mmc_power_up() at boot/initialization time if it's already happened, for performance (faster boot time) reasons. - Fix a bit width test failure that resulted in old eMMC cards being put into 1-bit mode when 4-bit mode was available. - Expose fwrev/hwrev for MMCv4 parts. - Improve card removal logic in the case where the card's removed slowly; we were missing card removal events if the card retained contact with the slot pads for long enough to reply to a CMD13 while being removed. Drivers: - davinci_mmc: Support using PIO instead of DMA. - dw_mmc: Add support for Exynos4412. - mxcmmc: DT support, use slot-gpio API. - mxs-mmc: Add broken-cd/cd-inverted/non-removable DT property support. - sdhci-sirf: New sdhci-pltfm driver for CSR SiRF SoCs: SiRFprimaII: unicore ARM Cortex-A9 SiRFatlas6: unicore ARM Cortex-A9 SiRFmarco: dual core ARM Cortex-A9 SMP - sdhci-tegra: Add support for Tegra114 platforms, use mmc_of_parse()" * tag 'mmc-updates-for-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (66 commits) mmc: sdhci-tegra: fix MODULE_DEVICE_TABLE mmc: core: fix init controller performance regression, updated patch mmc: mxcmmc: enable DMA support on mpc512x mmc: mxcmmc: constify mxcmci_devtype mmc: mxcmmc: use slot-gpio API for write-protect detection mmc: mxcmmc: add mpc512x SDHC support mmc: mxcmmc: fix race conditions for host->req and host->data access mmc: mxcmmc: DT support mmc: dw_mmc: let device core setup the default pin configuration mmc: mxs-mmc: add broken-cd property mmc: mxs-mmc: add non-removable property mmc: mxs-mmc: add cd-inverted property mmc: core: call pm_runtime_put_noidle in pm_runtime_get_sync failed case mmc: mxcmmc: Fix bug when card is present during boot mmc: core: fix performance regression initializing MMC host controllers Revert "mmc: core: wait while adding MMC host to ensure root mounts successfully" mmc: atmel-mci: pio hang on block errors mmc: core: Fix bit width test failing on old eMMC cards mmc: dw_mmc: Use pr_info instead of printk mmc: dw_mmc: Check return value of regulator_enable ...
| * mmc: block: fix the host's claim-release in special requestSeungwon Jeon2013-03-223-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For normal request mmc_blk_issue_rq is called twice with asynchronous transfer(cur and prev). Host's claim and release can be done in each mmc_blk_issue_rq. However, Special request is currently excluded in asynchronous transfer. After special request is finished, if there is no new request, mmc_release_host won't be called in mmc_blk_issue_rq. The problem is founded during mmc_suspend. [<c0541124>] (__schedule+0x0/0x78c) from [<c05419e8>] (schedule+0x38/0x78) [<c05419b0>] (schedule+0x0/0x78) from [<c03a843c>] (__mmc_claim_host+0xac/0x1b4) [<c03a8390>] (__mmc_claim_host+0x0/0x1b4) from [<c03ac98c>] (mmc_suspend+0x28/0x9c) [<c03ac964>] (mmc_suspend+0x0/0x9c) from [<c03aad24>] (mmc_suspend_host+0xb4/0x194) ... Reported-by: Johan Rudholm <jrudholm@gmail.com> Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Tested-by: Johan Rudholm <johan.rudholm@stericsson.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* | TTY: add tty_port_tty_hangup helperJiri Slaby2013-03-181-11/+2
|/ | | | | | | | | | It allows for cleaning up on a considerable amount of places. They did port_get, hangup, kref_put. Now the only thing needed is to call tty_port_tty_hangup which does exactly that. And they can also decide whether to consider CLOCAL or completely ignore that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'mmc-updates-for-3.9-rc1' of ↵Linus Torvalds2013-02-263-32/+612
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC update from Chris Ball: "MMC highlights for 3.9: Core: - Support for packed commands in eMMC 4.5. (This requires a host capability to be turned on. It increases write throughput by 20%+, but may also increase average write latency; more testing needed.) - Add DT bindings for capability flags. - Add mmc_of_parse() for shared DT parsing between drivers. Drivers: - android-goldfish: New MMC driver for the Android Goldfish emulator. - mvsdio: Add DT bindings, pinctrl, use slot-gpio for card detection. - omap_hsmmc: Fix boot hangs with RPMB partitions. - sdhci-bcm2835: New driver for controller used by Raspberry Pi. - sdhci-esdhc-imx: Add 8-bit data, auto CMD23 support, use slot-gpio. - sh_mmcif: Add support for eMMC DDR, bundled MMCIF IRQs. - tmio_mmc: Add DT bindings, support for vccq regulator" * tag 'mmc-updates-for-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (92 commits) mmc: tegra: assume CONFIG_OF, remove platform data mmc: add DT bindings for more MMC capability flags mmc: tmio: add support for the VccQ regulator mmc: tmio: remove unused and deprecated symbols mmc: sh_mobile_sdhi: use managed resource allocations mmc: sh_mobile_sdhi: remove unused .pdata field mmc: tmio-mmc: parse device-tree bindings mmc: tmio-mmc: define device-tree bindings mmc: sh_mmcif: use mmc_of_parse() to parse standard MMC DT bindings mmc: (cosmetic) remove "extern" from function declarations mmc: provide a standard MMC device-tree binding parser centrally mmc: detailed definition of CD and WP MMC line polarities in DT mmc: sdhi, tmio: only check flags in tmio-mmc driver proper mmc: sdhci: Fix parameter of sdhci_do_start_signal_voltage_switch() mmc: sdhci: check voltage range only on regulators aware of voltage value mmc: bcm2835: set SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK mmc: support packed write command for eMMC4.5 devices mmc: add packed command feature of eMMC4.5 mmc: rtsx: remove driving adjustment mmc: use regulator_can_change_voltage() instead of regulator_count_voltages ...
| * mmc: support packed write command for eMMC4.5 devicesSeungwon Jeon2013-02-243-17/+556
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch supports packed write command of eMMC4.5 devices. Several writes can be grouped in packed command and all data of the individual commands can be sent in a single transfer on the bus. Large amounts of data in one transfer rather than several data of small size are effective for eMMC write internally. As a result, packed command help write throughput be improved. The following tables show the results of packed write. Type A: test none | packed iozone 25.8 | 31 tiotest 27.6 | 31.2 lmdd 31.2 | 35.4 Type B: test none | packed iozone 44.1 | 51.1 tiotest 47.9 | 52.5 lmdd 51.6 | 59.2 Type C: test none | packed iozone 19.5 | 32 tiotest 19.9 | 34.5 lmdd 22.8 | 40.7 Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Reviewed-by: Maya Erez <merez@codeaurora.org> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
| * mmc: block: don't start new request when the card is removedSeungwon Jeon2013-02-241-2/+8
| | | | | | | | | | | | | | | | | | | | It's not necessary to start a new request while error handling if the card was removed. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Konstantin Dorfman <kdorfman@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
| * mmc: fix async request mechanism for sequential read scenariosKonstantin Dorfman2013-02-113-15/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When current request is running on the bus and if next request fetched by mmcqd is NULL, mmc context (mmcqd thread) gets blocked until the current request completes. This means that if new request comes in while the mmcqd thread is blocked, this new request can not be prepared in parallel to current ongoing request. This may result in delaying the new request execution and increase it's latency. This change allows to wake up the MMC thread on new request arrival. Now once the MMC thread is woken up, a new request can be fetched and prepared in parallel to the current running request which means this new request can be started immediately after the current running request completes. With this change read throughput is improved by 16%. Signed-off-by: Konstantin Dorfman <kdorfman@codeaurora.org> Reviewed-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
| * mmc: queue: exclude asynchronous transfer for special requestSeungwon Jeon2013-02-111-0/+10
| | | | | | | | | | | | | | | | | | | | Unlike normal r/w request, special requests(discard, flush) is finished with a one-time issue_fn. Request change to mqrq_prev makes unnecessary call. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Reviewed-by: Konstantin Dorfman <kdorfman@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* | tty: Added a CONFIG_TTY option to allow removal of TTYJoe Millenbach2013-01-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The option allows you to remove TTY and compile without errors. This saves space on systems that won't support TTY interfaces anyway. bloat-o-meter output is below. The bulk of this patch consists of Kconfig changes adding "depends on TTY" to various serial devices and similar drivers that require the TTY layer. Ideally, these dependencies would occur on a common intermediate symbol such as SERIO, but most drivers "select SERIO" rather than "depends on SERIO", and "select" does not respect dependencies. bloat-o-meter output comparing our previous minimal to new minimal by removing TTY. The list is filtered to not show removed entries with awk '$3 != "-"' as the list was very long. add/remove: 0/226 grow/shrink: 2/14 up/down: 6/-35356 (-35350) function old new delta chr_dev_init 166 170 +4 allow_signal 80 82 +2 static.__warned 143 142 -1 disallow_signal 63 62 -1 __set_special_pids 95 94 -1 unregister_console 126 121 -5 start_kernel 546 541 -5 register_console 593 588 -5 copy_from_user 45 40 -5 sys_setsid 128 120 -8 sys_vhangup 32 19 -13 do_exit 1543 1526 -17 bitmap_zero 60 40 -20 arch_local_irq_save 137 117 -20 release_task 674 652 -22 static.spin_unlock_irqrestore 308 260 -48 Signed-off-by: Joe Millenbach <jmillenbach@gmail.com> Reviewed-by: Jamey Sharp <jamey@minilop.net> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | TTY: switch tty_flip_buffer_pushJiri Slaby2013-01-151-10/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. Now, the one where most of tty_port_tty_get gets removed: tty_flip_buffer_push. IOW we also closed all the races in drivers not using tty_port_tty_get at all yet. Also we move tty_flip_buffer_push declaration from include/linux/tty.h to include/linux/tty_flip.h to all others while we are changing it anyway. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | TTY: switch tty_insert_flip_charJiri Slaby2013-01-151-2/+3
|/ | | | | | | | | | | | | Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. tty_insert_flip_char is the next one to proceed. This one is used all over the code, so the patch is huge. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OpenPOWER on IntegriCloud