summaryrefslogtreecommitdiffstats
path: root/drivers/mfd/Makefile
Commit message (Collapse)AuthorAgeFilesLines
* mfd: Kontron PLD mfd driverKevin Strasser2013-06-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | Add core MFD driver for the on-board PLD found on some Kontron embedded modules. The PLD device may provide functions like watchdog, GPIO, UART and I2C bus. The following modules are supported: * COMe-bIP# * COMe-bPC2 (ETXexpress-PC) * COMe-bSC# (ETXexpress-SC T#) * COMe-cCT6 * COMe-cDC2 (microETXexpress-DC) * COMe-cPC2 (microETXexpress-PC) * COMe-mCT10 * ETX-OH Originally-From: Michael Brunner <michael.brunner@kontron.com> Signed-off-by: Kevin Strasser <kevin.strasser@linux.intel.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Darren Hart <dvhart@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: arizona: Integrate wm8997 into Arizona mfdCharles Keepax2013-06-181-0/+3
| | | | | | | | | | | The wm8997 is a compact, high-performance audio hub CODEC with SLIMbus interfacing, for smartphones, tablets and other portable audio devices based on the Arizona platform. This patch integrates the wm8997 into the Arizona mfd. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Move ssbi driver into drivers/mfdArnd Bergmann2013-06-111-1/+1
| | | | | | | | | | | | | | | There is no reason for ssbi to have its own top-level driver directory when the only users of this interface are all MFD drivers. The only mainline driver using it at the moment (PM8921) is marked broken and in fact does not compile. I have verified that fixing the trivial build breakage in pm8921 links in the new ssbi code just fine, but that can be a separate patch. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: si476x: Add header files and Kbuild plumbingAndrey Smirnov2013-04-191-0/+4
| | | | | | | | | | | | | | | | This patch adds all necessary header files and Kbuild plumbing for the core driver for Silicon Laboratories Si476x series of AM/FM tuner chips. The driver as a whole is implemented as an MFD device and this patch adds a core portion of it that provides all the necessary functionality to the two other drivers that represent radio and audio codec subsystems of the chip. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: rtsx: Support RTS5249Wei WANG2013-04-191-1/+1
| | | | | | | | | | | | RTS5249 supports SD UHS-II interface. In order to support SD UHS-II，the definitions of some internal registers of RTS5249 have to be modified and are different from its predecessors. So we need this patch to ensure RTS5249 can work, even SD/MMC stack doesn't support UHS-II interface. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Add ChromeOS EC SPI driverSimon Glass2013-04-051-0/+1
| | | | | | | | | | This uses a SPI bus to talk to the ChromeOS EC. The protocol is defined by the EC and is fairly simple, with a length byte, checksum, command byte and version byte (to permit easy creation of new commands). Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Add ChromeOS EC I2C driverSimon Glass2013-04-051-0/+1
| | | | | | | | | | | This uses an I2C bus to talk to the ChromeOS EC. The protocol is defined by the EC and is fairly simple, with a length byte, checksum, command byte and version byte (to permit easy creation of new commands). Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Add ChromeOS EC implementationSimon Glass2013-04-051-0/+1
| | | | | | | | | | | | | | | | | | | This is the base EC implementation, which provides a high level interface to the EC for use by the rest of the kernel. The actual communcations is dealt with by a separate protocol driver which registers itself with this interface. Interrupts are passed on through a notifier. A simple message structure is used to pass messages to the protocol driver. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Jonathan Kliegman <kliegs@chromium.org> Signed-off-by: Luigi Semenzato <semenzato@chromium.org> Signed-off-by: Olof Johansson <olofj@chromium.org> Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: rtsx: Support RTS5227Roger Tseng2013-02-141-1/+1
| | | | | | | | Support new model RTS5227. Signed-off-by: Roger Tseng <rogerable@realtek.com> Reviewed-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* Merge tag 'mfd-3.8-1' of ↵Linus Torvalds2012-12-161-2/+8
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFS update from Samuel Ortiz: "This is the MFD patch set for the 3.8 merge window. We have several new drivers, most of the time coming with their sub devices drivers: - Austria Microsystem's AS3711 - Nano River's viperboard - TI's TPS80031, AM335x TS/ADC, - Realtek's MMC/memstick card reader - Nokia's retu We also got some notable cleanups and improvements: - tps6586x got converted to IRQ domains. - tps65910 and tps65090 moved to the regmap IRQ API. - STMPE is now Device Tree aware. - A general twl6040 and twl-core cleanup, with moves to the regmap I/O and IRQ APIs and a conversion to the recently added PWM framework. - sta2x11 gained regmap support. Then the rest is mostly tiny cleanups and fixes, among which we have Mark's wm5xxx and wm8xxx patchset." Far amount of annoying but largely trivial conflicts. Many due to __devinit/exit removal, others due to one or two of the new drivers also having come in through another tree. * tag 'mfd-3.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (119 commits) mfd: tps6507x: Convert to devm_kzalloc mfd: stmpe: Update DT support for stmpe driver mfd: wm5102: Add readback of DSP status 3 register mfd: arizona: Log if we fail to create the primary IRQ domain mfd: tps80031: MFD_TPS80031 needs to select REGMAP_IRQ mfd: tps80031: Add terminating entry for tps80031_id_table mfd: sta2x11: Fix potential NULL pointer dereference in __sta2x11_mfd_mask() mfd: wm5102: Add tuning for revision B mfd: arizona: Defer patch initialistation until after first device boot mfd: tps65910: Fix wrong ack_base register mfd: tps65910: Remove unused data mfd: stmpe: Get rid of irq_invert_polarity mfd: ab8500-core: Fix invalid free of devm_ allocated data mfd: wm5102: Mark DSP memory regions as volatile mfd: wm5102: Correct default for LDO1_CONTROL_2 mfd: arizona: Register haptics devices mfd: wm8994: Make current device behaviour the default mfd: tps65090: MFD_TPS65090 needs to select REGMAP_IRQ mfd: Fix stmpe.c build when OF is not enabled mfd: jz4740-adc: Use devm_kzalloc ...
| * mfd: Add an AS3711 PMIC MFD driverGuennadi Liakhovetski2012-11-231-0/+1
| | | | | | | | | | | | | | | | | | AS3711 is a PMIC with multiple DCDC and LDO power supplies, GPIOs, an RTC, a battery charger and a general purpose ADC. This patch adds support for the MFD with support for a regulator driver and a backlight driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * mfd: Introduce retu-mfd driverAaro Koskinen2012-11-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Retu is a multi-function device found on Nokia Internet Tablets implementing at least watchdog, RTC, headset detection and power button functionality. This patch implements minimum functionality providing register access, IRQ handling and power off functions. Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * mfd: Add TI TPS80031 mfd core driverLaxman Dewangan2012-11-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | TPS80031/ TPS80032 Fully Integrated Power Management with Power Path and Battery Charger. The device provides five configurable step-down converters, 11 general purpose LDOs, USB OTG Module, ADC, RTC, 2 PWM, System Voltage Regulator/Battery Charger with Power Path from USB, 32K clock generator. Add the mfd core driver for TPS80031/TPS80032. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviwed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * mfd: Add viperboard driverLars Poeschel2012-11-201-0/+1
| | | | | | | | | | | | | | Add mfd driver for Nano River Technologies viperboard. Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * mfd: da9052: Introduce da9052-irq.cFabio Estevam2012-11-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Create a da9052-irq.c file so that it can handle interrupt related functions. This is useful for allowing the da9052 drivers to use such functions when dealing with da9052 interrupts. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * mfd: tps65910: Move interrupt implementation code to mfd fileLaxman Dewangan2012-11-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | In place of implementing the irq support in separate file, moving implementation to main mfd file. The irq files only contains the table and init steps only and does not need extra file to have this only for this purpose. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * mfd: twl6040: Rename the core driverPeter Ujfalusi2012-11-131-1/+1
| | | | | | | | | | | | | | | | After the regmap_irq conversion there is no need to call the driver as twl6040-core.c since there is only one c file remained. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * mfd: twl6040: Convert to use regmap_irqPeter Ujfalusi2012-11-131-1/+1
| | | | | | | | | | | | | | | | | | With regmap_irq it is possible to remove the twl6040-irq.c file and simplify the code. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * mfd: Add realtek pcie card reader driverWei WANG2012-11-081-0/+3
| | | | | | | | | | | | | | | | | | | | Realtek PCI-E card reader driver adapts requests from upper-level sdmmc/memstick layer to the real physical card reader. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * mfd: ti_tscadc: Add support for TI's TSC/ADC MFDevicePatil, Rachna2012-11-051-0/+1
| | | | | | | | | | | | | | | | | | | | Add the mfd core driver which supports touchscreen and ADC. With this patch we are only adding infrastructure to support the MFD clients. Signed-off-by: Patil, Rachna <rachna@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-12-121-0/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM SoC updates from Olof Johansson: "This contains the bulk of new SoC development for this merge window. Two new platforms have been added, the sunxi platforms (Allwinner A1x SoCs) by Maxime Ripard, and a generic Broadcom platform for a new series of ARMv7 platforms from them, where the hope is that we can keep the platform code generic enough to have them all share one mach directory. The new Broadcom platform is contributed by Christian Daudt. Highbank has grown support for Calxeda's next generation of hardware, ECX-2000. clps711x has seen a lot of cleanup from Alexander Shiyan, and he's also taken on maintainership of the platform. Beyond this there has been a bunch of work from a number of people on converting more platforms to IRQ domains, pinctrl conversion, cleanup and general feature enablement across most of the active platforms." Fix up trivial conflicts as per Olof. * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (174 commits) mfd: vexpress-sysreg: Remove LEDs code irqchip: irq-sunxi: Add terminating entry for sunxi_irq_dt_ids clocksource: sunxi_timer: Add terminating entry for sunxi_timer_dt_ids irq: versatile: delete dangling variable ARM: sunxi: add missing include for mdelay() ARM: EXYNOS: Avoid early use of of_machine_is_compatible() ARM: dts: add node for PL330 MDMA1 controller for exynos4 ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412 ARM: EXYNOS: add UART3 to DEBUG_LL ports ARM: S3C24XX: Add clkdev entry for camif-upll clock ARM: SAMSUNG: Add s3c24xx/s3c64xx CAMIF GPIO setup helpers ARM: sunxi: Add missing sun4i.dtsi file pinctrl: samsung: Do not initialise statics to 0 ARM i.MX6: remove gate_mask from pllv3 ARM i.MX6: Fix ethernet PLL clocks ARM i.MX6: rename PLLs according to datasheet ARM i.MX6: Add pwm support ARM i.MX51: Add pwm support ARM i.MX53: Add pwm support ARM: mx5: Replace clk_register_clkdev with clock DT lookup ...
| * | mfd: Versatile Express system registers driverPawel Moll2012-11-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a platform driver for Versatile Express' "system register" block. It's a random collection of registers providing the following functionality: - low level platform functions like board ID access; in order to use those, the driver must be initialized early, either statically or based on the DT - config bus bridge via "system control" interface; as the response from the controller does not generate interrupt (yet), the status register is periodically polled using a timer - pseudo GPIO lines providing MMC card status and Flash WP# signal control - LED interface for a set of 8 LEDs on the motherboard, with "heartbeat", "mmc0" and "cpu0" to "cpu5" as default triggers Signed-off-by: Pawel Moll <pawel.moll@arm.com>
| * | mfd: Versatile Express config infrastructurePawel Moll2012-11-051-0/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Versatile Express platform has an elaborated configuration system, consisting of microcontrollers residing on the mother- and daughterboards known as Motherboard/Daughterboard Configuration Controller (MCC and DCC). The controllers are responsible for the platform initialization (reset generation, flash programming, FPGA bitfiles loading etc.) but also control clock generators, voltage regulators, gather environmental data like temperature, power consumption etc. Even the video output switch (FPGA) is controlled that way. Those devices are _not_ visible in the main address space and the usual communication channel uses some kind of a bridge in the peripheral block sending commands (requests) to the controllers and receiving responses. It can take up to 500 microseconds for a transaction to be completed, therefore it is important to provide a non-blocking interface to it. This patch adds an abstraction of this infrastructure. Bridge drivers can register themselves with the framework. Then, a driver of a device can request an abstract "function" - the request will be redirected to a bridge referred by thedd "arm,vexpress,config-bridge" property of the device tree node. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
* | drivers/mfd: Add realtek pcie card reader driverWei WANG2012-11-151-0/+3
|/ | | | | | | | | | Realtek PCI-E card reader driver adapts requests from upper-level sdmmc/memstick layer to the real physical card reader. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mfd: smsc: Add support for smsc gpio io/keypad driverSourav Poddar2012-10-011-0/+1
| | | | | | | | | | | | smsc ece1099 is a keyboard scan or gpio expansion device. The patch create keypad and gpio expander child for this multi function smsc driver. Cc: Benoit Cousson <b-cousson@ti.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: DA9055 core driverAshish Jangam2012-09-291-0/+3
| | | | | | | | | | | This is the DA9055 MFD core driver that instantiate all the dependent component drivers and provides them the device access via I2C. This patch is functionally tested on Samsung SMDK6410. Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Add lp8788 mfd driverMilo Kim2012-09-231-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TI LP8788 PMU provides regulators, battery charger, ADC, RTC, backlight driver and current sinks. This MFD patch supports the I2C communication using the regmap, the interrupt handling using the linear IRQ domain and configurable platform data structures for each driver module. (Driver Architecture) < mfd devices > LP8788 HW .......... mfd .......... regulator drivers I2C power supply driver IRQs iio adc driver rtc driver backlight driver current sink drivers o regulators : LDOs and BUCKs o power supply : Battery charger o iio adc : Battery voltage/temperature o rtc : RTC and alarm o backlight o current sink : LED and vibrator All MFD device modules are registered by LP8788 MFD core driver. For sharing information such like the virtual IRQ number, MFD core driver uses the resource structure. Then each module can retrieve the specific IRQ number and detect it in the IRQ thread. Configurable platform data is handled in each driver module. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: omap-usb-tll: HOST TLL platform driverKeshava Munegowda2012-09-211-1/+1
| | | | | | | | | | | | | | The platform driver for the TLL component of the OMAP USB host controller is implemented. Depending on the TLL hardware revision , the TLL channels are configured. The USB HS core driver uses this driver through exported APIs from the TLL platform driver. usb_tll_enable and usb_tll_disble are the exported APIs of the USB TLL platform driver. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Reviewed-by: Partha Basak <parthab@india.ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* pwm: Move TWL6030 PWM driver to PWM frameworkThierry Reding2012-09-191-1/+0
| | | | | | | | | | This commit moves the driver to drivers/pwm and converts it to the new PWM framework. In order for this to work properly, register the PWM as child of the multi-function TWL6030 device. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: anatop-mfd: remove anatop driverDong Aisheng2012-09-171-1/+0
| | | | | | | | | The anatop registers are accessed via syscon now, no one will use mfd anatop driver anymore, remove it. Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Add syscon driver based on regmapDong Aisheng2012-09-171-0/+1
| | | | | | | | | | | | | Add regmap based syscon driver. This is usually used for access misc bits in registers which does not belong to a specific module, for example, IMX IOMUXC GPR and ANATOP. With this driver, client can use generic regmap API to access registers which are registered into syscon. Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Add MAX8907 core driverGyungoh Yoo2012-09-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MAX8907 is an I2C-based power-management IC containing voltage regulators, a reset controller, a real-time clock, and a touch-screen controller. The original driver was written by: * Gyungoh Yoo <jack.yoo@maxim-ic.com> Various fixes and enhancements by: * Jin Park <jinyoungp@nvidia.com> * Tom Cherry <tcherry@nvidia.com> * Prashant Gaikwad <pgaikwad@nvidia.com> * Dan Willemsen <dwillemsen@nvidia.com> * Laxman Dewangan <ldewangan@nvidia.com> During upstreaming, I (swarren): * Converted to regmap. * Converted to regmap-irq. * Allowed probing from device tree. * Renamed from max8907c->max8907, since the driver covers at least the C and B revisions. * General cleanup. Signed-off-by: Gyungoh Yoo <jack.yoo@maxim-ic.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> #v3 Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Initial support for the WM5110Mark Brown2012-07-161-0/+3
| | | | | | | | | | | The WM5110 is a highly-integrated low-power audio system for smartphones, tablets and other portable audio devices. It combines an advanced DSP feature set with a flexible, high-performance audio hub CODEC. The support is based on the Arizona core driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Rename s5m file and directories to samsungSangbeom Kim2012-07-161-1/+1
| | | | | | | | | | Previously, Samsung PMIC naming rule start with prefix of s5m. But Naming rule is changed. From now on, Prefix will be changed to s2m. So, To support pmic series of s5m and s2m, change mfd file and directory name. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Support 88pm80x in 80x driverQiao Zhou2012-07-091-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | 88PM800 and 88PM805 are two discrete chips used for power management. Hardware designer can use them together or only one of them according to requirement. 88pm80x.c provides common i2c driver handling for both 800 and 805, such as i2c_driver init, regmap init, read/write api etc. 88pm800.c handles specifically for 800, such as chip init, irq init/handle, mfd device register, including rtc, onkey, regulator( to be add later) etc. besides that, 800 has three i2c device, one regular i2c client, two other i2c dummy for gpadc and power purpose. 88pm805.c handles specifically for 805, such as chip init, irq init/handle, mfd device register, including codec, headset/mic detect etc. the i2c operation of both 800 and 805 are via regmap, and 88pm80x-i2c exported a group of r/w bulk r/w and bits set API for facility. Signed-off-by: Qiao Zhou <zhouqiao@marvell.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* Merge tag 'mfd/wm5102' of ↵Samuel Ortiz2012-07-091-0/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc into for-next mfd: Initial support for Wolfson Arizona platform and WM5102 devices The Wolfson Arizona platform is used to provide common register interface to a series of low power audio hub CODECs, starting with the WM5102. Since the features of these devices work over a range of subsystems an MFD core driver is provided to instantiate the subdevices and arbitrate access between them. As the new regmap wake IRQ functionality is used as part of the driver it is incorporated as a dependency.
| * mfd: wm5102: Build system hookupMark Brown2012-06-231-0/+7
| | | | | | | | | | | | | | | | Several forthcoming Wolfson devices are based on a common platform known as Arizona allowing a great deal of reuse of driver code. This patch adds the build system hookup for the core driver and the WM5102. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | mfd: Add Maxim 77686 driverJonghwa Lee2012-07-091-0/+1
|/ | | | | | | | | | | | | | | This patch is device driver for MAX77686 chip. MAX77686 is PMIC and includes regulator and rtc on it. This driver is core of MAX77686 chip, so provides common support for accessing on-chip devices. It uses irq_domain to manage irq and regmap to read/write data to its register with i2c bus. Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* Merge tag 'mfd-3.5-1' of ↵Linus Torvalds2012-05-291-3/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD changes from Samuel Ortiz: "Besides the usual cleanups, this one brings: * Support for 5 new chipsets: Intel's ICH LPC and SCH Centerton, ST-E's STAX211, Samsung's MAX77693 and TI's LM3533. * Device tree support for the twl6040, tps65910, da9502 and ab8500 drivers. * Fairly big tps56910, ab8500 and db8500 updates. * i2c support for mc13xxx. * Our regular update for the wm8xxx driver from Mark." Fix up various conflicts with other trees, largely due to ab5500 removal etc. * tag 'mfd-3.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (106 commits) mfd: Fix build break of max77693 by adding REGMAP_I2C option mfd: Fix twl6040 build failure mfd: Fix max77693 build failure mfd: ab8500-core should depend on MFD_DB8500_PRCMU gpio: tps65910: dt: process gpio specific device node info mfd: Remove the parsing of dt info for tps65910 gpio mfd: Save device node parsed platform data for tps65910 sub devices mfd: Add r_select to lm3533 platform data gpio: Add Intel Centerton support to gpio-sch mfd: Emulate active low IRQs as well as active high IRQs for wm831x mfd: Mark two lm3533 zone registers as volatile mfd: Fix return type of lm533 attribute is_visible mfd: Enable Device Tree support in the ab8500-pwm driver mfd: Enable Device Tree support in the ab8500-sysctrl driver mfd: Add support for Device Tree to twl6040 mfd: Register the twl6040 child for the ASoC codec unconditionally mfd: Allocate twl6040 IRQ numbers dynamically mfd: twl6040 code cleanup in interrupt initialization part mfd: Enable ab8500-gpadc driver for Device Tree mfd: Prevent unassigned pointer from being used in ab8500-gpadc driver ...
| * mfd: Remove confusing ab8500-i2c file and merge into ab8500-coreLee Jones2012-05-201-3/+2
| | | | | | | | | | | | | | | | | | | | | | ab8500-i2c is used as core code to register the ab8500 device. After allocating ab8500 memory, it immediately calls into ab8500-core where the real initialisation takes place. This patch moves all core registration and memory allocation into the true ab8500-core file and removes ab8500-i2c completely. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * mfd: Add MAX77693 irq handlerChanwoo Choi2012-05-201-1/+1
| | | | | | | | | | | | | | | | | | This patch supports IRQ handling for MAX77693. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * mfd: Add MAX77693 driverChanwoo Choi2012-05-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds MFD driver for MAX77693 to enable its sub devices. The MAX77693 is a multi-function devices. It includes PMIC, MUIC(Micro USB Interface Controller), flash LED control and haptic motor control. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * mfd: Add LM3533 lighting-power core driverJohan Hovold2012-05-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | Add support for National Semiconductor / TI LM3533 lighting power chips. This is the core driver which provides register access over I2C and registers the ambient-light-sensor, LED and backlight sub-drivers. Signed-off-by: Johan Hovold <jhovold@gmail.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * mfd: Add driver for STA2X11 MFD blockAlessandro Rubini2012-05-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | This also introduces <asm/sta2x11.h> to export a function that is in the base sta2x11 support patches. The header will increase with other prototypes and constants over time. Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * mfd: Add mc13xxx i2c driverMarc Reilly2012-05-011-0/+1
| | | | | | | | | | | | | | | | Adds support for mc13xxx family ICs connected via i2c. Signed-off-by: Marc Reilly <marc@cpdesign.com.au> Acked-by: Oskar Schirmer <oskar@scara.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * mfd: Move the mc13xxx-core spi specific code into a separate moduleMarc Reilly2012-05-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | All spi specific code is moved into a new module. The mc13xxx struct moves to a new local include file by necessity. A new config choice selects the SPI bus type support and by default is value of SPI_MASTER to remain compatible with existing configs. Signed-off-by: Marc Reilly <marc@cpdesign.com.au> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * mfd: Add LPC driver for Intel ICH chipsetsAaron Sierra2012-05-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | This driver currently creates resources for use by a forthcoming ICH chipset GPIO driver. It could be expanded to create the resources for converting the esb2rom (mtd) and iTCO_wdt (wdt), and potentially more, drivers to use the mfd model. Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-05-221-3/+0
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull first batch of arm-soc cleanups from Olof Johansson: "These cleanups are basically all over the place. The idea is to collect changes with minimal impact but large number of changes so we can avoid them from distracting in the diffstat in the other series. A significant number of lines get removed here, in particular because the ixp2000 and ixp23xx platforms get removed. These have never been extremely popular and have fallen into disuse over time with no active maintainer taking care of them. The u5500 soc never made it into a product, so we are removing it from the ux500 platform. Many good cleanups also went into the at91 and omap platforms, as has been the case for a number of releases." Trivial modify-delete conflicts in arch/arm/mach-{ixp2000,ixp23xx} * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (152 commits) ARM: clps711x: Cleanup IRQ handling ARM clps711x: Removed unused header mach/time.h ARM: clps711x: Added note about support EP731x CPU to Kconfig ARM: clps711x: Added missing register definitions ARM: clps711x: Used own subarch directory for store header file Dove: Fix Section mismatch warnings ARM: orion5x: ts78xx debugging changes ARM: orion5x: remove PM dependency from ts78xx ARM: orion5x: ts78xx fix NAND resource off by one ARM: orion5x: ts78xx whitespace cleanups Orion5x: Fix Section mismatch warnings Orion5x: Fix warning: struct pci_dev declared inside paramter list ARM: clps711x: Combine header files into one for clps711x-targets ARM: S3C24XX: Use common macro to define resources on mach-qt2410.c ARM: S3C24XX: Use common macro to define resources on mach-osiris.c ARM: EXYNOS: Adapt to cpuidle core time keeping and irq enable ARM: S5PV210: Use common macro to define resources on mach-smdkv210.c ARM: S5PV210: Use common macro to define resources on dev-audio.c ARM: S5PC100: Use common macro to define resources on dev-audio.c ARM: S5P64X0: Use common macro to define resources on dev-audio.c ...
| * | mfd/ab5500: delete AB5500 supportLinus Walleij2012-05-021-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This platform has been obsoleted and was only available inside of ST-Ericsson, no users of this code are left in the world. This deletes the core U5500 support entirely in the same manner as the obsoleted U8500 silicon was previously deleted. Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Rabin Vincent <rabin.vincent@stericsson.com> Cc: Jonas Aberg <jonas.aberg@stericsson.com> Cc: Per Forlin <per.forlin@stericsson.com> Cc: Ulf Hansson <ulf.hansson@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | mfd/db5500-prcmu: delete DB5500 PRCMU supportLinus Walleij2012-05-021-1/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | This platform has been obsoleted and was only available inside of ST-Ericsson, no users of this code are left in the world. This deletes the core U5500 support entirely in the same manner as the obsoleted U8500 silicon was previously deleted. Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Rabin Vincent <rabin.vincent@stericsson.com> Cc: Jonas Aberg <jonas.aberg@stericsson.com> Cc: Per Forlin <per.forlin@stericsson.com> Cc: Ulf Hansson <ulf.hansson@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
OpenPOWER on IntegriCloud