summaryrefslogtreecommitdiffstats
path: root/drivers/media
Commit message (Collapse)AuthorAgeFilesLines
* V4L/DVB (8108): Fix open/close race in saa7134Arjan van de Ven2008-06-261-0/+4
| | | | | | | | | | | | | | | | | | | The saa7134 driver uses a (non-atomic) variable in an attempt to only allow one opener of the device (how it deals with sending the fd over unix sockets I don't know). Unfortunately, the release function first decrements this variable, and THEN goes on to disable more of the device. This allows for a race where another opener of the device comes in after the decrement of the variable, configures the hardware just to then see the hardware be disabled by the rest of the release function. This patch makes the release function use the same lock as the open function to protect the hardware as well as the variable (which now at least has some locking to protect it). Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8100): V4L/vivi: fix possible memory leak in vivi_fillbuffMarcin Slusarz2008-06-261-3/+4
| | | | | | | | | Move allocation after first check and fix memory leak. Noticed-by: Daniel Marjamäki <danielm77@spray.se> Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8097): xc5000: check device hardware state to determine if firmware ↵Steven Toth2008-06-262-8/+23
| | | | | | | | | | | download is needed This patch ensures that the xc5000 will have firmware loaded as needed if the part is powered down or reset via gpio from the host. An example of this, in some cases, could be after the system resumes from standby or hibernate modes. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8096): au8522: prevent false-positive lock statusSteven Toth2008-06-261-4/+2
| | | | | | | | This decreases scan time in Queens, New York from 28 minutes to 7 minutes, with the exact same services found. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8092): videodev: simplify and fix standard enumerationHans Verkuil2008-06-261-177/+68
| | | | | | | | | | | | | VIDIOC_ENUMSTD did not return all the PAL/SECAM/NTSC variants: it just returned one single PAL/SECAM/NTSC standard without separate entries for the trickier standards like NTSC-JP. Changed the code so that it behaves better. Also simplified the if/switch statements into a common standards lookup table. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8075): stv0299: Uncorrected block count and bit error rate fixedOliver Endriss2008-06-261-4/+11
| | | | | | | | | Fix uncorrected block counter and bit error rate to follow DVB API spec: - Unsupported controls return -ENOSYS. - UNC must never be set to 0. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8074): av7110: OSD transfers should not be interruptedOliver Endriss2008-06-261-3/+1
| | | | | | | OSD transfers should not be interrupted. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8073): av7110: Catch another type of ARM crashOliver Endriss2008-06-261-0/+1
| | | | | | | Catch another type of ARM crash. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8071): tda10023: Fix possible kernel oops during initialisationOliver Endriss2008-06-261-8/+12
| | | | | | | | | | | | | | If the i2c write fails during initialisation, an oops happens because state->frontend.dvb is still undefined. Fixed. Thanks to Sigmund Augdal for reporting this bug, and to Hartmut Birr for suggesting the fix. Thanks-to: Sigmund Augdal <sigmund@snap.tv> Thanks-to: Hartmut Birr <e9hack@gmail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8069): cx18: Fix S-Video and Compsite inputs for the Yuan MPC718 ↵Andy Walls2008-06-261-11/+14
| | | | | | | | | | | | | | and enable card entry cx18: Fix S-Video and Compsite input settings for the Yuan MPC718 per user reports from Yuri Warczynski <Yuri.Warczynski@gmail.com> and Brian Hope <brian@hopefamily.info> and enable the card entry. The tuner reset GPIO pin is likely incorrect as the tuner firmware cannot be reloaded without a reboot. It is likely the audio routing is done via GPIO which is not implemented yet, as users report audio doesn't work for some inputs. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8068): cx18: Add I2C slave reset via GPIO upon initializationAndy Walls2008-06-265-2/+47
| | | | | | | | | | | cx18: Add I2C slave reset via GPIO upon initialization. One user, Michael <msd4824@yahoo.com>, has reported this allows his HVR-1600 EEPROM to be consistently recognized when using (long,) 100 msec delays. The delays in this commit are nominal (10 & 40 msec) and need testing/tuning on boards with I2C problems to find the right values. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8067): cx18: Fix firmware load for case when digital capture ↵Andy Walls2008-06-261-1/+16
| | | | | | | | | | | | happens first This is a fix for the case when a digital capture from dvr0 happens first after modprobe, before access to any cx18 v4l2 device nodes. The initial dvb feed start has been changed to load the firmware if not already loaded. Also fixed a use counter to correct dvb feed accounting if starting the transport DMA fails. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8066): cx18: Fix audio mux input definitions for HVR-1600 Line In 2 ↵Andy Walls2008-06-261-4/+4
| | | | | | | | | | | | and FM radio Fix the cx18-cards.c structures for the HVR-1600 to reflect that audio Line In 2 and FM radio audio go to AIN3 and AIN4 of the CS5345 mux respectively. Verified by physical inspection of an HVR-1600MCE, by listening to FM broadcasts with the HVR-1600MCE, and by comparing with the card definition for a PVR-150 in ivtv. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8063): cx18: Fix unintended auto configurations in cx18-av-coreAndy Walls2008-06-262-8/+73
| | | | | | | | | | Change the cx18-av-core code so that accesses to cx23418 av core that cause auto-configuration will be adjusted to emulate the auto-configuration behavior of the cx25843. This fixes the VBI displayed as video at the top of the frame for NTSC and probably other things. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8061): cx18: only select tuner / frontend modules if !DVB_FE_CUSTOMISEMichael Krufky2008-06-261-2/+2
| | | | | | | | | | | The automatic Kconfig selection for tuners and frontends should be conditional, based on !DVB_FE_CUSTOMISE. This patch corrects the selection for VIDEO_CX18 on MEDIA_TUNER_MXL5005S and DVB_S5H1409 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8048): saa7134: Fix entries for Avermedia A16d and Avermedia E506Tim Farrington2008-06-264-43/+94
| | | | | | | Also, adds IR table for Avermedia A16d Signed-off-by: Tim Farrington <timf@iinet.net.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8044): au8522: tuning optimizationsMichael Krufky2008-06-261-2/+21
| | | | | | | | | | | | If the current modulation and frequency is already set to the desired parameters, then don't re-tune. Don't store current frequency until after we've tuned successfully. Force a re-tune after resume from standby. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8043): au0828: add support for additional USB device id'sMichael Krufky2008-06-261-0/+18
| | | | | Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8042): DVB-USB UMT-010 channel scan oopsAustin Lund2008-06-261-1/+1
| | | | | | | | | | | | | | | | In the umt-010 driver the struct umt_properties sets the number of URBs for transfer to 20. But in dvb-usb.h MAX_NO_URBS_FOR_DATA_STREAM is set to 10. Not surprisingly this causes an oops for all devices which use the umt-010 chipset when they are inserted. fix on Kaffeine channel scan for Initialize stream count using MAX_NO_URBS_FOR_DATA_STREAM. Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: maximilian attems <max@stro.at> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8040): soc-camera: remove soc_camera_host_class classGuennadi Liakhovetski2008-06-261-16/+0
| | | | | | | | | | | Devices can either be class devices or bus devices, not both at the same time. Soc-camera host devices usually have a platform device as their parent. Trying to also register them with a class crashes the kernel, when linked statically. Interestingly, it works when built as a module. Thanks to Paulius Zaleckas for reporting. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8039): pxa-camera: fix platform_get_irq() error handling.Guennadi Liakhovetski2008-06-261-2/+2
| | | | | | | platform_get_irq() returns a negative value on error, not 0. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8037): tda18271: ensure that the thermometer is off during channel ↵Michael Krufky2008-06-261-0/+3
| | | | | | | | | | configuration Having the thermometer on during channel configuration could cause tuning instability. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8036): tda18271: toggle rf agc speed mode on TDA18271HD/C2 onlyMichael Krufky2008-06-261-8/+12
| | | | | Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8035): tda18271: dont touch EB14 if rf_cal lookup is out of rangeMichael Krufky2008-06-261-1/+9
| | | | | | | | | The TDA18271HD/C1 rf_cal map lookup is expected to go out of range outside of the frequency window 41 MHz - 61.1 MHz. In these cases, the internal RF tracking filters calibration mechanism is used. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8034): tda18271: fix IF notch frequency handlingMichael Krufky2008-06-261-11/+19
| | | | | | | | | The IF notch bit gets unset when we update the Main Post Div register value, before we have a chance to write the desired IF notch setting to the tuner. Move the IF notch configuration to after we update MPD. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8029): Improve error message at tda1004x_attachMauro Carvalho Chehab2008-06-261-2/+13
| | | | | | | | | | | | | | | | | | | When an error occurs at firmware loading, sometimes, tda1004x stops answering. Instead of reporting such error, attach code were assuming that the device were answering an invalid ID (0xff). This can be seen when enabling debug options: tda1004x: tda1004x_read_byte: reg=0x0 tda1004x: tda1004x_read_byte: error reg=0x0, ret=-5 Now, instead of reporting an invalid ID, it will report the correct error: tda10046: chip is not answering. Giving up. saa7133[0]/dvb: failed to attach tda10046 saa7133[0]/dvb: frontend initialization failed A possible improvement would be trying to reset the device. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8028): Improve error messages for tda1004x attachMauro Carvalho Chehab2008-06-262-5/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A fresh copy of v.29 firmware, using get_firmware, is leading to an invalid firmware: DVB: registering new adapter (saa7133[0]) DVB: registering frontend 0 (Philips TDA10046H DVB-T)... tda1004x: setting up plls for 48MHz sampling clock tda1004x: found firmware revision ff -- invalid tda1004x: trying to boot from eeprom tda1004x: found firmware revision ff -- invalid tda1004x: waiting for firmware upload... tda1004x: Error during firmware upload tda1004x: found firmware revision ff -- invalid tda1004x: firmware upload failed Sometimes, loading/unloading this firmware makes tda1004x to return an invalid ID. However, there were no printk messages to help to identify what were the cause for the error. With this patch, it will now print: Invalid tda1004x ID = 0xff. Can't proceed saa7133[0]/dvb: failed to attach tda10046 saa7133[0]/dvb: frontend initialization failed Tested with LifeView FlyDVB-T Hybrid Cardbus/MSI TV @nywhere A/D NB Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8027): saa7134: Avermedia A700: only s-video and composite input ↵Matthias Schwarzott2008-06-261-1/+2
| | | | | | | | | | are working Describe exactly that only s-video and composite input are working on Avermedia A700 Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8026): Avoids an OOPS if dev struct can't be successfully recoveredMauro Carvalho Chehab2008-06-263-1/+19
| | | | | | | | | | | | On some alsa versions, it seems that snd_pcm_substream_chip(substream) is returning a NULL pointer. This causes an OOPS, as reported by: https://bugs.launchpad.net/ubuntu/+source/linux-ubuntu-modules-2.6.24/+bug/212271 https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/212960 This patch avoids the OOPS by not letting and open() succeed. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8022): saa7134: fix race between opening and closing the deviceMarcin Slusarz2008-06-261-1/+2
| | | | | | | | | | decrementing dev->empress_users should be done as last action of ts_release, because it sleeps and write access to dev->empress_started is not protected in any way (additionally closing thread could mute audio after opening thread unmuted it) Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8020): Fix callbacks functions of saa7134_empressDmitri Belimov2008-06-261-20/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If I try v4l2-ctl --all -d /dev/video1 or v4l2-ctl --streamon -d /dev/video1 modules crashed: *pde = 00000000 Modules linked in: ac battery loop saa7134_empress(F) saa6752hs(F) tuner_simple(F) tuner_types(F) tea5767(F) tda9887(F) tda8290(F) tea5761(F) tuner(F) snd_cmipci snd_pcm snd_page_alloc snd_opl3_lib saa7134(F) snd_mpu401 parport_pc parport snd_timer snd_hwdep snd_mpu401_uart floppy rtc psmouse videodev(F) v4l1_compat(F) compat_ioctl32(F) v4l2_common(F) videobuf_dma_sg(F) videobuf_core(F) snd_rawmidi snd_seq_device via_ircc pcspkr snd ir_kbd_i2c(F) irda soundcore ir_common(F) crc_ccitt tveeprom(F) i2c_viapro i2c_core button via_agp agpgart evdev ext3 jbd mbcache ide_cd_mod cdrom ide_disk 8139cp via82cxxx ide_core 8139too mii ehci_hcd uhci_hcd usbcore thermal processor fan EIP is at __mutex_lock_slowpath+0x29/0x7b DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process v4l2-ctl (pid: 2742, ti=ced7e000 task=cf325260 task.ti=ced7e000) d08e5411 00000000 ced7fed4 00000000 d0975acb 40045612 cfa86ee0 ffffffcd cf2b7000 ced7febc c03858d6 00000019 00000292 d089e4ec cf37b2a0 d089e4a0 Call Trace: [<c028b52b>] mutex_lock+0xa/0xb [<d08e5411>] videobuf_streamon+0xf/0x9a [videobuf_core] [<d0975acb>] __video_do_ioctl+0x136a/0x2d68 [videodev] [<d088f789>] task_end_request+0x40/0x51 [ide_core] [<d088c4aa>] ide_intr+0x187/0x192 [ide_core] [<c016a551>] mntput_no_expire+0x11/0x64 [<c0160b1c>] path_walk+0x90/0x98 [<d0977738>] video_ioctl2+0x173/0x239 [videodev] [<c0140936>] filemap_fault+0x202/0x370 [<c014930a>] __do_fault+0x2c3/0x2fe [<c014ab03>] handle_mm_fault+0x22a/0x49f [<c0162737>] vfs_ioctl+0x47/0x5d [<c0162992>] do_vfs_ioctl+0x245/0x258 [<c01629e6>] sys_ioctl+0x41/0x5b [<c01036a6>] sysenter_past_esp+0x5f/0x85 ======================= After this fix all of that commands works without problem: v4l2-ctl --all -d /dev/video1 Driver Info: Driver name : saa7134 Card type : Beholder BeholdTV M6 Extra Bus info : PCI:0000:00:0d.0 Driver version: 526 Capabilities : 0x05000001 Video Capture Read/Write Streaming Format Video Capture: Width/Height : 720/576 Pixel Format : MPEG Field : Any Bytes per Line: 0 Size Image : 58656 Colorspace : Unknown (00000000) Video input : 0 (CCIR656) Video Standard = 0x000000ff PAL-B/B1/G/H/I/D/D1/K P.S. data from /dev/video1 is not correct :(( . Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8018): Add em2860 chip IDDevin Heitmueller2008-06-262-0/+4
| | | | | | | | | | em28xx-cards.c em28xx-reg.h - Add em2860 chip ID (seen on Pointnix Intra-Oral Camera) http://www.pointnix.com/ENG/dental/product_02.asp Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8017): Ensure em28xx extensions only get run against devs that ↵Devin Heitmueller2008-06-262-0/+22
| | | | | | | | | | | | | support them em28xx-audio.c em28xx-dvb.c - Em28xx extensions should ensure they are being only loaded against devices that support them. Deals with case where there are multiple em28xx devices, some of which have DVB (or ALSA) support and some do not. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8015): gl861: replace non critical msleep(0) with msleep(1) to be ↵Antti Palosaari2008-06-261-1/+1
| | | | | | | | | on the safe side - change msleep(0) to msleep(1) Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8013): gl861: remove useless identify_stateAntti Palosaari2008-06-261-17/+8
| | | | | | | - remove useless identify_state - device is always warm Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8012): gl861: sleep a little to avoid I2C errorsAntti Palosaari2008-06-261-0/+2
| | | | | | | - add little sleep to avoid I2C errors arising on faster CPUs Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8011): em28xx: enable DVB for HVR-900Devin Heitmueller2008-06-261-0/+1
| | | | | | | | | | em28xx-cards.c - DVB support is supposed to be enabled for the first generation HVR-900. This device was confirmed with DVB by mkrufky when we did the original work in April, but I guess we forgot to set the flag. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8010): em28xx: Properly register extensions for already attached ↵Devin Heitmueller2008-06-261-14/+10
| | | | | | | | | | | | | | devices em28xx-video.c - Properly handle loading of the module when multiple devices are already connected (such as at bootup). Before we were only calling dvb_init() against the last device in the list, so while we were handling subsequent adds properly, if there were multiple devices present on driver load, everybody except the last device would not get initialized. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8008): cx18: remove duplicate audio and video input enumsHans Verkuil2008-06-262-70/+31
| | | | | | | | | | | cx18-cards.h had a copy of the audio and video input enums from cx18-av-core.h, but with different prefixes. Removed that copy and used the ones from cx18-av-core.h. Thanks to Andy Walls <awalls@radix.net> for the report. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8007): cx18/cx25840: the S-Video LUMA input can use all In1-In8 inputsHans Verkuil2008-06-263-3/+7
| | | | | | | | The S-Video LUMA input was restricted to the In1-In4 inputs, but it turns out that it can use the full range of In1-In8. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8005): Fix OOPS if frontend is nullMauro Carvalho Chehab2008-06-261-1/+2
| | | | | | | Thanks to timf <timf@iinet.net.au> and Mike Galbraith <efault@gmx.de> to report this issue. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8004): Fix INPUT dependency at budget-ciMauro Carvalho Chehab2008-06-261-0/+1
| | | | | | | | | | | | | | | | | | | | As reported by Ingo Molnar: MODPOST 346 modules ERROR: "input_free_device" [drivers/media/dvb/ttpci/budget-ci.ko] undefined! ERROR: "input_register_device" [drivers/media/dvb/ttpci/budget-ci.ko] undefined! ERROR: "input_allocate_device" [drivers/media/dvb/ttpci/budget-ci.ko] undefined! ERROR: "input_unregister_device" [drivers/media/dvb/ttpci/budget-ci.ko] undefined! ERROR: "input_event" [drivers/media/common/ir-common.ko] undefined! This occurs when: CONFIG_INPUT=n CONFIG_VIDEO_IR=m CONFIG_DVB_BUDGET_CI=m Thanks-to: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8001): dib0070: fix dib0070_attach when !CONFIG_DVB_TUNER_DIB0070Michael Krufky2008-06-051-1/+14
| | | | | Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8000): tda827x: fix NULL pointer in tda827xa_lna_gainSigmund Augdal2008-06-051-2/+2
| | | | | | | | Check that tda827x_config is defined before attempting to use it. Signed-off-by: Sigmund Augdal <sigmund@snap.tv> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7990): Fix entry for PowerColor RA 330 and make it run with ↵Daniel Gimpelevich2008-06-051-3/+10
| | | | | | | firmware version 2.7 Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7983): tda18271_calc_rf_cal must return the return value of ↵Michael Krufky2008-06-051-2/+2
| | | | | | | | | | | | tda18271_lookup_map On the TDA18271HD/C1, we perform RF tracking filter correction for VHF low band, only. If supplied a frequency out of range, the error must be returned to the caller (tda18271c1_rf_tracking_filter_calibration) so that it can decide whether or not to write to register EB14, RFC_CPROG[7:0] Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7978): cx18: explicitly test for XC2028 tunerHans Verkuil2008-06-051-1/+1
| | | | | | | | Testing whether xceive_pin is non-zero is not good enough as 0 is a valid value. Instead explicitly test whether the Xceive tuner is used. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7977): cx18: fix init order and remove duplicate open_on_first_use.Hans Verkuil2008-06-051-12/+10
| | | | | Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7975): saa7134_empressDmitri Belimov2008-06-051-2/+1
| | | | | | | This is patch for fix data structure in querycap syscall. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7974): fix MEDIA_TUNER && FW_LOADER build errorIngo Molnar2008-06-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | -tip testing found the following build failure: LD .tmp_vmlinux1 drivers/built-in.o: In function `generic_set_freq': tuner-xc2028.c:(.text+0xbd896): undefined reference to `request_firmware' tuner-xc2028.c:(.text+0xbdd7a): undefined reference to `release_firmware' drivers/built-in.o: In function `xc_load_fw_and_init_tuner': xc5000.c:(.text+0xc68e6): undefined reference to `request_firmware' xc5000.c:(.text+0xc6abe): undefined reference to `release_firmware' with this config: http://redhat.com/~mingo/misc/config-Tue_May_20_18_11_34_CEST_2008.bad the reason is another kconfig tool bug that has to be worked around in the driver's Kconfig file: if FW_LOADER is selected in a second dependency, that is not properly propagated up the dependencies. in this case, FW_LOADER is selected from MEDIA_TUNER_XC2028: config MEDIA_TUNER_XC2028 tristate "XCeive xc2028/xc3028 tuners" depends on VIDEO_MEDIA && I2C depends on HOTPLUG select FW_LOADER which got selected by MEDIA_TUNER: config MEDIA_TUNER tristate default VIDEO_MEDIA && I2C depends on VIDEO_MEDIA && I2C select FW_LOADER if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG but the kconfig tool did not pick up this second-order dependency and allowed CONFIG_FW_LOADER=m to be selected - in which case the build fails. the workaround i found was to move the select of FW_LOADER one level up, so that the buggy kconfig tool can notice it and can act appropriately. This problem can probably be worked around in other ways as well, i went for the minimal fix. Obviously, the kconfig tool should be fixed, it is not reasonable to expect driver authors to do manual dependency resolution (that kconfig itself already does) and uglify the Kconfig files. The kconfig tool did nothing to warn about this situation and did not prevent this faulty .config from being constructed. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
OpenPOWER on IntegriCloud