summaryrefslogtreecommitdiffstats
path: root/drivers/media/video
Commit message (Collapse)AuthorAgeFilesLines
* [media] bttv: remove obsolete 'no_tda9875' fieldHans Verkuil2011-01-192-40/+0
| | | | | | | Since tda9875 is part of tvaudio this field no longer makes sense. Remove it. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] tda9875: remove duplicate driverHans Verkuil2011-01-193-421/+0
| | | | | | | | | | | | | | | | | | | | | | In commit 411674fd189abe5910ea4caf08b7eac5c4a4d967 the tda9875 support was added to tvaudio. This means that tda9875 is no longer used since mid-2009. If there are out-of-tree users of this driver, then they can switch to tvaudio instead. The original commit message read as follows: This change allows bttv to use tvaudio for this device. Since this device has the same i2c address as the tda9874 we need to support both in the same tvaudio driver. This makes it possible for tvaudio to detect which chip is used. Originally the tda9875 was only available in the dedicated tda9875 driver, but that makes life very hard for bttv since loading tvaudio might misdetect a tda9875 as a tda9874. So there were good reasons for moving the tda9875 code into tvaudio. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* Merge branch 'linux-next' of ↵Linus Torvalds2011-01-141-3/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI/PM: Report wakeup events before resuming devices PCI/PM: Use pm_wakeup_event() directly for reporting wakeup events PCI: sysfs: Update ROM to include default owner write access x86/PCI: make Broadcom CNB20LE driver EMBEDDED and EXPERIMENTAL x86/PCI: don't use native Broadcom CNB20LE driver when ACPI is available PCI/ACPI: Request _OSC control once for each root bridge (v3) PCI: enable pci=bfsort by default on future Dell systems PCI/PCIe: Clear Root PME Status bits early during system resume PCI: pci-stub: ignore zero-length id parameters x86/PCI: irq and pci_ids patch for Intel Patsburg PCI: Skip id checking if no id is passed PCI: fix __pci_device_probe kernel-doc warning PCI: make pci_restore_state return void PCI: Disable ASPM if BIOS asks us to PCI: Add mask bit definition for MSI-X table PCI: MSI: Move MSI-X entry definition to pci_regs.h Fix up trivial conflicts in drivers/net/{skge.c,sky2.c} that had in the meantime been converted to not use legacy PCI power management, and thus no longer use pci_restore_state() at all (and that caused trivial conflicts with the "make pci_restore_state return void" patch)
| * PCI: make pci_restore_state return voidJon Mason2010-12-231-3/+1
| | | | | | | | | | | | | | | | | | | | | | pci_restore_state only ever returns 0, thus there is no benefit in having it return any value. Also, a large majority of the callers do not check the return code of pci_restore_state. Make the pci_restore_state a void return and avoid the overhead. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | Merge branch 'for-next' of ↵Linus Torvalds2011-01-139-11/+9
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) Documentation/trace/events.txt: Remove obsolete sched_signal_send. writeback: fix global_dirty_limits comment runtime -> real-time ppc: fix comment typo singal -> signal drivers: fix comment typo diable -> disable. m68k: fix comment typo diable -> disable. wireless: comment typo fix diable -> disable. media: comment typo fix diable -> disable. remove doc for obsolete dynamic-printk kernel-parameter remove extraneous 'is' from Documentation/iostats.txt Fix spelling milisec -> ms in snd_ps3 module parameter description Fix spelling mistakes in comments Revert conflicting V4L changes i7core_edac: fix typos in comments mm/rmap.c: fix comment sound, ca0106: Fix assignment to 'channel'. hrtimer: fix a typo in comment init/Kconfig: fix typo anon_inodes: fix wrong function name in comment fix comment typos concerning "consistent" poll: fix a typo in comment ... Fix up trivial conflicts in: - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c) - fs/ext4/ext4.h Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
| * | media: comment typo fix diable -> disable.Justin P. Mattock2011-01-032-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | The below patch fixes a typo "diable" to "disable". Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | Revert conflicting V4L changesJiri Kosina2010-12-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | This is a partial revert of b595076a180a56d1bb1 ("tree-wide: fix comment/printk typos"), as it changes the code that no longer exists in linux-next. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | Merge branch 'master' into for-nextJiri Kosina2010-12-2268-742/+653
| |\ \ | | |/ | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: MAINTAINERS arch/arm/mach-omap2/pm24xx.c drivers/scsi/bfa/bfa_fcpim.c Needed to update to apply fixes for which the old branch was too outdated.
| * | tree-wide: fix comment/printk typosUwe Kleine-König2010-11-017-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "gadget", "through", "command", "maintain", "maintain", "controller", "address", "between", "initiali[zs]e", "instead", "function", "select", "already", "equal", "access", "management", "hierarchy", "registration", "interest", "relative", "memory", "offset", "already", Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | VIA Chrome camera: remove duplicate includesJesper Juhl2010-10-301-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | The VIA Chrome integrated camera controller driver includes both 'linux/pci.h' and 'linux/device.h' twice. This gets rid of the duplicates. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | Merge branch 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds2011-01-0711-13/+56
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (33 commits) usb: don't use flush_scheduled_work() speedtch: don't abuse struct delayed_work media/video: don't use flush_scheduled_work() media/video: explicitly flush request_module work ioc4: use static work_struct for ioc4_load_modules() init: don't call flush_scheduled_work() from do_initcalls() s390: don't use flush_scheduled_work() rtc: don't use flush_scheduled_work() mmc: update workqueue usages mfd: update workqueue usages dvb: don't use flush_scheduled_work() leds-wm8350: don't use flush_scheduled_work() mISDN: don't use flush_scheduled_work() macintosh/ams: don't use flush_scheduled_work() vmwgfx: don't use flush_scheduled_work() tpm: don't use flush_scheduled_work() sonypi: don't use flush_scheduled_work() hvsi: don't use flush_scheduled_work() xen: don't use flush_scheduled_work() gdrom: don't use flush_scheduled_work() ... Fixed up trivial conflict in drivers/media/video/bt8xx/bttv-input.c as per Tejun.
| * | | media/video: don't use flush_scheduled_work()Tejun Heo2010-12-244-10/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch converts the remaining users of flush_scheduled_work() in media/video. * bttv-input.c and cx23885-input.c don't use workqueue at all. No need to flush. * Make omap24xxcam.c and saa7134-empress.c flush the used work directly. * In fd_defio.c, replace cancel_delayed_work() + flush_scheduled_work() with cancel_delayed_work_sync(). While at it, replace the deprecated cancel_rearming_delayed_work() with cancel_delayed_work_sync(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | | media/video: explicitly flush request_module workTejun Heo2010-12-246-2/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Video drivers request submodules using a work during probe and calls flush_scheduled_work() on exit to make sure the work is complete before being unloaded. This patch makes these drivers flush the work directly instead of using flush_scheduled_work(). While at it, relocate request_submodules() call in saa7134_initdev() right right before successful return as in other drivers to avoid failing after the work is scheduled and returning failure without the work still active. This is in preparation for the deprecation of flush_scheduled_work(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | | workqueue: convert cancel_rearming_delayed_work[queue]() users to ↵Tejun Heo2010-12-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cancel_delayed_work_sync() cancel_rearming_delayed_work[queue]() has been superceded by cancel_delayed_work_sync() quite some time ago. Convert all the in-kernel users. The conversions are completely equivalent and trivial. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: "David S. Miller" <davem@davemloft.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: netdev@vger.kernel.org Cc: Anton Vorontsov <cbou@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Neil Brown <neilb@suse.de> Cc: Alex Elder <aelder@sgi.com> Cc: xfs-masters@oss.sgi.com Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: netfilter-devel@vger.kernel.org Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: linux-nfs@vger.kernel.org
* | | | Merge branch 'usb-next' of ↵Linus Torvalds2011-01-071-1/+2
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (144 commits) USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004) USB: serial: ftdi_sio: add support for TIOCSERGETLSR USB: ehci-mxc: Setup portsc register prior to accessing OTG viewport USB: atmel_usba_udc: fix freeing irq in usba_udc_remove() usb: ehci-omap: fix tll channel enable mask usb: ohci-omap3: fix trivial typo USB: gadget: ci13xxx: don't assume that PAGE_SIZE is 4096 USB: gadget: ci13xxx: fix complete() callback for no_interrupt rq's USB: gadget: update ci13xxx to work with g_ether USB: gadgets: ci13xxx: fix probing of compiled-in gadget drivers Revert "USB: musb: pm: don't rely fully on clock support" Revert "USB: musb: blackfin: pm: make it work" USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path USB: uas: Ensure we only bind to a UAS interface USB: uas: Rename sense pipe and sense urb to status pipe and status urb USB: uas: Use kzalloc instead of kmalloc USB: uas: Fix up the Sense IU usb: musb: core: kill unneeded #include's DA8xx: assign name to MUSB IRQ resource usb: gadget: g_ncm added ... Manually fix up trivial conflicts in USB Kconfig changes in: arch/arm/mach-omap2/Kconfig arch/sh/Kconfig drivers/usb/Kconfig drivers/usb/host/ehci-hcd.c and annoying chip clock data conflicts in: arch/arm/mach-omap2/clock3xxx_data.c arch/arm/mach-omap2/clock44xx_data.c
| * \ \ \ USB: Merge 2.6.37-rc5 into usb-nextGreg Kroah-Hartman2010-12-2221-543/+492
| |\ \ \ \ | | | |_|/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is to resolve the conflict in the file, drivers/usb/gadget/composite.c that was due to a revert in Linus's tree needed for the 2.6.37 release. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | | Merge branch 'usb-next' into musb-mergeGreg Kroah-Hartman2010-12-161-1/+2
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * usb-next: (132 commits) USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path USB: uas: Ensure we only bind to a UAS interface USB: uas: Rename sense pipe and sense urb to status pipe and status urb USB: uas: Use kzalloc instead of kmalloc USB: uas: Fix up the Sense IU usb: musb: core: kill unneeded #include's DA8xx: assign name to MUSB IRQ resource usb: gadget: g_ncm added usb: gadget: f_ncm.c added usb: gadget: u_ether: prepare for NCM usb: pch_udc: Fix setup transfers with data out usb: pch_udc: Fix compile error, warnings and checkpatch warnings usb: add ab8500 usb transceiver driver USB: gadget: Implement runtime PM for MSM bus glue driver USB: gadget: Implement runtime PM for ci13xxx gadget USB: gadget: Add USB controller driver for MSM SoC USB: gadget: Introduce ci13xxx_udc_driver struct USB: gadget: Initialize ci13xxx gadget device's coherent DMA mask USB: gadget: Fix "scheduling while atomic" bugs in ci13xxx_udc USB: gadget: Separate out PCI bus code from ci13xxx_udc ...
| | * | | | USB: fix leftover references to udev->autosuspend_delayAlan Stern2010-11-171-1/+2
| | | |_|/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1436) takes care of leftover references to udev->autosuspend_delay that didn't get removed during the earlier conversion to the runtime-PM autosuspend API. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | | | Merge branch 'v4l_for_linus' of ↵Linus Torvalds2011-01-06190-19757/+8444
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (255 commits) [media] radio-aimslab.c: Fix gcc 4.5+ bug [media] cx25821: Fix compilation breakage due to BKL dependency [media] v4l2-compat-ioctl32: fix compile warning [media] zoran: fix compiler warning [media] tda18218: fix compile warning [media] ngene: fix compile warning [media] DVB: IR support for TechnoTrend CT-3650 [media] cx23885, cimax2.c: Fix case of two CAM insertion irq [media] ir-nec-decoder: fix repeat key issue [media] staging: se401 depends on USB [media] staging: usbvideo/vicam depends on USB [media] soc_camera: Add the ability to bind regulators to soc_camedra devices [media] V4L2: Add a v4l2-subdev (soc-camera) driver for OmniVision OV2640 sensor [media] v4l: soc-camera: switch to .unlocked_ioctl [media] v4l: ov772x: simplify pointer dereference [media] ov9640: fix OmniVision OV9640 sensor driver's priv data retrieving [media] ov9640: use macro to request OmniVision OV9640 sensor private data [media] ivtv-i2c: Fix two warnings [media] staging/lirc: Update lirc TODO files [media] cx88: Remove the obsolete i2c_adapter.id field ...
| * | | | | [media] v4l2-compat-ioctl32: fix compile warningHans Verkuil2011-01-041-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/media/video/v4l2-compat-ioctl32.c: In function 'get_v4l2_format32': drivers/media/video/v4l2-compat-ioctl32.c:169:2: warning: case value '0' not in enumerated type 'enum v4l2_buf_type' drivers/media/video/v4l2-compat-ioctl32.c: In function 'put_v4l2_format32': drivers/media/video/v4l2-compat-ioctl32.c:200:2: warning: case value '0' not in enumerated type 'enum v4l2_buf_type' Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | | | [media] zoran: fix compiler warningHans Verkuil2011-01-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/media/video/zoran/zoran_driver.c: In function 'zoran_dqbuf': drivers/media/video/zoran/zoran_driver.c:2197:21: warning: 'bs.frame' may be used uninitialized in this function Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | | | [media] cx23885, cimax2.c: Fix case of two CAM insertion irqIgor M. Liplianin2010-12-311-8/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For example boot up with two CAM inserted. Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | | | [media] soc_camera: Add the ability to bind regulators to soc_camedra devicesAlberto Panizzo2010-12-301-21/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In certain machines, camera devices are supplied directly by a number of regulators. This patch add the ability to drive these regulators directly by the soc_camera driver. Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | | | [media] V4L2: Add a v4l2-subdev (soc-camera) driver for OmniVision OV2640 sensorAlberto Panizzo2010-12-303-0/+1212
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | | | [media] v4l: soc-camera: switch to .unlocked_ioctlGuennadi Liakhovetski2010-12-307-48/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the V4L mutex infrastructure in soc-camera core and drivers and switch to .unlocked_ioctl. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | | | [media] v4l: ov772x: simplify pointer dereferenceGuennadi Liakhovetski2010-12-301-10/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use a more direct way to obtain a pointer to struct ov772x_priv, where the subdevice is available. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | | | [media] ov9640: fix OmniVision OV9640 sensor driver's priv data retrievingDavid Cohen2010-12-301-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OmniVision OV9640 driver wasn't requesting properly its private data on I2C remove and video_probe functions. It was retrieving the V4L2 subdev struct address instead of priv struct's one. This patch fixes such problem. Signed-off-by: David Cohen <dacohen@gmail.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | | | [media] ov9640: use macro to request OmniVision OV9640 sensor private dataDavid Cohen2010-12-301-8/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This cleanup patch creates macro to request OmniVision OV9640 private data, which increases readability. Signed-off-by: David Cohen <dacohen@gmail.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | | | [media] ivtv-i2c: Fix two warningsMauro Carvalho Chehab2010-12-301-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix two gcc warnings: drivers/media/video/ivtv/ivtv-i2c.c:170: warning: cast from pointer to integer of different size drivers/media/video/ivtv/ivtv-i2c.c:171: warning: cast from pointer to integer of different size $ gcc --version gcc (GCC) 4.1.2 20080704 (Red Hat 4.1.2-48) They seem bogus, but, as the original code also has problems with LE/BE, just change its implementation to be clear. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | | | [media] cx88: Remove the obsolete i2c_adapter.id fieldMauro Carvalho Chehab2010-12-302-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | | | [media] ir-kbd-i2c: Add HD PVR IR Rx support to ir-kbd-i2cAndy Walls2010-12-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add HD PVR IR Rx support to ir-kbd-i2c Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | | | [media] hdpvr: Add I2C and ir-kdb-i2c registration of the Zilog Z8 IR chipAndy Walls2010-12-303-0/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds I2C registration of the Zilog Z8F0811 IR microcontroller for either lirc_zilog or ir-kbd-i2c to use. This is a required step in removing lirc_zilog's use of the deprecated struct i2c_adapter.id field. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | | | [media] ivtv-i2c: Don't use IR legacy mode for Zilog IRMauro Carvalho Chehab2010-12-301-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Zilog IR entries are already handled by IR new code. So, remove its usage from the legacy IR support. Acked-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | | | [media] ivtv: Add Adaptec Remote ControllerMauro Carvalho Chehab2010-12-303-3/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | lirc-i2c implements a get key logic for the Adaptec Remote Controller, at address 0x6b. The only driver that seems to have an Adaptec device is ivtv: $ git grep -i adaptec drivers/media drivers/media/video/cs53l32a.c: * cs53l32a (Adaptec AVC-2010 and AVC-2410) i2c ivtv driver. drivers/media/video/cs53l32a.c: * Audio source switching for Adaptec AVC-2410 added by Trev Jackson drivers/media/video/cs53l32a.c: /* Set cs53l32a internal register for Adaptec 2010/2410 setup */ drivers/media/video/ivtv/ivtv-cards.c:/* Adaptec VideOh! AVC-2410 card */ drivers/media/video/ivtv/ivtv-cards.c: { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_ADAPTEC, 0x0093 }, drivers/media/video/ivtv/ivtv-cards.c: .name = "Adaptec VideOh! AVC-2410", drivers/media/video/ivtv/ivtv-cards.c:/* Adaptec VideOh! AVC-2010 card */ drivers/media/video/ivtv/ivtv-cards.c: { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_ADAPTEC, 0x0092 }, drivers/media/video/ivtv/ivtv-cards.c: .name = "Adaptec VideOh! AVC-2010", drivers/media/video/ivtv/ivtv-cards.h:#define IVTV_CARD_AVC2410 7 /* Adaptec AVC-2410 */ drivers/media/video/ivtv/ivtv-cards.h:#define IVTV_CARD_AVC2010 8 /* Adaptec AVD-2010 (No Tuner) */ drivers/media/video/ivtv/ivtv-cards.h:#define IVTV_PCI_ID_ADAPTEC 0x9005 drivers/media/video/ivtv/ivtv-driver.c: "\t\t\t 8 = Adaptec AVC-2410\n" drivers/media/video/ivtv/ivtv-driver.c: "\t\t\t 9 = Adaptec AVC-2010\n" drivers/media/video/ivtv/ivtv-i2c.c: 0x6b, /* Adaptec IR */ There are two Adaptec cards defined there, but AVC-2010 doesn't have a remote controller. So, the logic at lirc_i2c seems to be for Adaptec AVC-2410. As we'll remove lirc_i2c from kernel, move the getkey code to ivtv driver, and use it for AVC-2410. Reviewed-by: Andy Walls <awalls@md.metrocast.net> Acked-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | | | [media] cx88: Add RC logic for Leadtek PVR 2000Mauro Carvalho Chehab2010-12-301-1/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, lirc-i2c has a decoding logic for Leadtek Remote Control. Move it to cx88, as we intend to remove lirc-i2c. For now, initialize LIRC remote keytable with RC_MAP_EMPTY, as we don't know its keymap yet. It would be nice to later check if is there any file on LIRC userspace with that keytable. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | | | [media] bttv-input: Add a note about PV951 RCMauro Carvalho Chehab2010-12-301-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When comparing lirc-i2c and ir-kbd-i2c/bttv-input logic, a difference was noticed. As lirc-i2c will be removed soon, store the difference on a comment inside ir-kbd-i2c, in order to preserve the knowledge we have about that remote controller. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | | | [media] timblogiw: fix compile warningHans Verkuil2010-12-301-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix 64-bit compile warning: drivers/media/video/timblogiw.c: In function ‘timblogiw_dma_filter_fn’: drivers/media/video/timblogiw.c:151: warning: cast from pointer to integer of different size drivers/media/video/timblogiw.c: In function ‘timblogiw_open’: drivers/media/video/timblogiw.c:670: warning: cast to pointer from integer of different size Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Cc: Richard Rojförs <richard.rojfors@pelagicore.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | | | [media] v4l: fix handling of v4l2_input.capabilitiesHans Verkuil2010-12-3012-37/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The v4l core sets the v4l2_input.capabilities field based on the supplied v4l2_ioctl_ops. However, several drivers do a memset or memcpy of the v4l2_input struct, thus overwriting that field incorrectly. Either remove the memset (which is already done by the v4l core), or add the proper capabilities field in case of a memcpy. The same is also true for v4l2_output, but that only affected the ivtv driver. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | | | [media] em28xx: fix incorrect s_ctrl error code and wrong call to res_freeHans Verkuil2010-12-301-5/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Calling subdevs to handle s_ctrl returned a non-zero return code even if everything went fine. Calling STREAMOFF if no STREAMON happened earlier would hit a BUG_ON in res_free. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | | | [media] v4l2-ctrls: only check def for menu, integer and boolean controlsHans Verkuil2010-12-301-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 'def' field is only valid for menus, integers and booleans. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | | | [media] v4l2-ctrls: use const char * const * for the menu arraysHans Verkuil2010-12-306-35/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This prevents checkpatch warnings generated when defining 'static const char *foo[]' arrays. It makes sense to use const char * const * anyway since the pointers in the array are indeed const. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | | | [media] usbvision: coding styleHans Verkuil2010-12-305-686/+557
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | | | [media] usbvision: convert // to /* */Hans Verkuil2010-12-304-175/+173
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | | | [media] usbvision: get rid of camelCaseHans Verkuil2010-12-305-1581/+1581
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | | | [media] usbvision: convert to unlocked_ioctlHans Verkuil2010-12-303-43/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert driver to use core-assisted locking. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | | | [media] gspca - sonixj: Bad clock for om6802 in 640x480Jean-François Moine2010-12-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | | | [media] gspca - stv06xx/st6422: Use the new video control mechanismJean-François Moine2010-12-292-164/+118
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | | | [media] gspca - vc032x: Cleanup sourceJean-François Moine2010-12-291-34/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | | | [media] gspca - zc3xx: The sensor of the VF0250 is a GC0303Jean-François Moine2010-12-291-30/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | | | [media] gspca - zc3xx: Use the new video control mechanismJean-François Moine2010-12-291-176/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
OpenPOWER on IntegriCloud