summaryrefslogtreecommitdiffstats
path: root/drivers/media/video/s5p-fimc
Commit message (Collapse)AuthorAgeFilesLines
* [media] V4L: vb2: prepare to support multi-size buffersGuennadi Liakhovetski2011-11-032-6/+6
| | | | | | | | | In preparation for the forthcoming VIDIOC_CREATE_BUFS ioctl add a "const struct v4l2_format *" argument to the .queue_setup() vb2 operation. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Convert to use generic media bus polarity flagsSylwester Nawrocki2011-09-242-5/+10
| | | | | | | | | Switch to generic media bus signal polarity flags and allow configuring the FIELD signal polarity. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Remove single-planar capability flagsSylwester Nawrocki2011-09-062-3/+1
| | | | | | | | | | The driver supports only multi-planar API and conversion to single-planar API should be done in libv4l2. Remove misleading single planar capability flags to avoid problems in applications and libv4l2. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Correct crop offset alignment on exynos4Sylwester Nawrocki2011-09-061-2/+2
| | | | | | | | | Horizontal crop offset must be multiple of 2 otherwise color distortion occurs. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Add runtime PM support in the camera capture driverSylwester Nawrocki2011-09-063-28/+69
| | | | | | | | | Add support for whole pipeline suspend/resume. Sensors must support suspend/resume through s_power subdev operation. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Use consistent names for the buffer list functionsSylwester Nawrocki2011-09-063-19/+31
| | | | | | | | Also correct and improve *_queue_add/pop functions description. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Add v4l2_device notification support for single frame captureSylwester Nawrocki2011-09-063-0/+50
| | | | | | Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Add support for JPEG captureSylwester Nawrocki2011-09-065-52/+81
| | | | | | | | | | | | Add support for transparent DMA transfer of JPEG data with MIPI-CSI2 USER1 format. In JPEG mode the color effect, scaling and cropping is not supported as well as image rotation and flipping thus these controls are marked as inactive if V4L2_PIX_FMT_JPEG pixel format was selected. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Add subdev for the FIMC processing blockSylwester Nawrocki2011-09-065-121/+751
| | | | | | | | | | | | | | | Add a subdev to expose the host's scaling and composition functions. The camera frame composition onto an output buffer may be configured through set/get_crop at FIMC.{n} source pad. Additionally allow crop, composition and controls to be modified during streaming. Make sure the default format is set when opening the video capture node. Rename struct fimc_vid_cap::fmt to more relevant 'mf' to avoid confusion. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Convert to use media pipeline operationsSylwester Nawrocki2011-09-063-124/+130
| | | | | | | | | | | | | | | | | | | | In the camera capture driver use fimc_pipeline_* calls provided by the media device driver part, in place where v4l2_subdev_call() were used. This way the capture driver don't need to differentiate between various H/W pipeline setups, i.e. if the MIPI-CSI receiver subdev is used or not. Remove the sync_capture_fmt() function instead of which fimc_pipeline_try_format() is introduced in the following patch adding the FIMC capture subdev. The TRY_FMT ioctl function is completed by a subsequent patch adding the capture subdev, so the try_fmt routines can be reused in the subdev and the video node ioctl handlers. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Correct color format enumerationSylwester Nawrocki2011-09-064-44/+57
| | | | | | | | | | | | | | | Replace fimc_find_format() and find_mbus_format() with single function that can return a pointer to the private format description based on fourcc, media bus code or index in the table. Create separate VIDIOC_ENUM_FMT ioctl handlers for video capture and mem-to-mem video node. This is needed because some formats are valid only for the video capture and some only for the mem-to-mem video node. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Add PM helper function for streaming controlSylwester Nawrocki2011-09-063-35/+46
| | | | | | | | | Move the camera capture H/W initialization sequence to a separate function. This is needed for reuse in the following runtime PM code. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Add media operations in the capture entity driverSylwester Nawrocki2011-09-062-0/+34
| | | | | | | | Add the link_setup handler for the camera capture video node. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Convert to the new control frameworkSylwester Nawrocki2011-09-065-241/+188
| | | | | | | | | | | | | | | | | | | | | | Convert the v4l controls code to use the new control framework. fimc_ctrls_activate/deactivate functions are introduced for the transparent DMA transfer mode (JPEG), where the rotation and flipping controls are not supported. The capture video node does not inherit sensors' controls when the subdevs are configured by the user space (user_subdev_api == true). However by default after the driver's initialization the 'user-subdev_api' flag is false and any sensor controls will also be available at the video node. When the pipeline links are disconnected through the media device the FIMC and any sensor inherited controls are destroyed and then again created when the pipeline connection completes. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Conversion to use struct v4l2_fhSylwester Nawrocki2011-09-063-138/+165
| | | | | | | | | | | | This is a prerequisite for the patch converting the driver to use the control framework. As the capture driver does not use per file handle contexts, two separate ioctl handlers are created for it (vidioc_try_fmt_mplane, and vidioc_g_fmt_mplane) so there is no handlers shared between the memory-to-memory and capture video node. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Add the media device driverSylwester Nawrocki2011-09-065-20/+978
| | | | | | | | | | | | | | | | | | | | | | | | | | Add a top level media device driver aggregating FIMC video devnodes, MIPI-CSIS and sensor subdevs. This driver gathers all media entities and creates the possible links between them during initialization. By default some links will be activated to enable access to all available sensors in the system. For example if there are sensors S0, S1 listed in the media device platform data definition they will be by default assigned to FIMC0, FIMC1 respectively, which in turn will corresponds to separate /dev/video?. There is enough FIMC H/W entities to cover all available physical camera interfaces in the system. The fimc media device driver is bound to the "s5p-fimc-md" platform device. Such platform device should be created by board initialization code and camera sensors description array need to be specified as its platform data. The media device driver also implements various video pipeline operations, for enabling subdevs power, streaming, etc., which will be used by the capture video node driver. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Remove v4l2_device from video capture and m2m driverSylwester Nawrocki2011-09-064-68/+47
| | | | | | | | | | | | | | Currently there is a v4l2_device instance being registered per each (capture and memory-to-memory) video node created per FIMC H/W instance. This patch is a prerequisite for using the top level v4l2_device instantiated by the media device driver. To retain current debug trace semantic (so it's possible to distinguish between the capture and m2m FIMC) the video_device is used in place of v4l2_device where appropriate. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Remove sensor management code from FIMC capture driverSylwester Nawrocki2011-09-062-139/+2
| | | | | | | | | | The sensor subdevs need to be shared between all available FIMC instances. Remove their registration from FIMC capture driver so they can then be registered to the media device driver. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Limit number of available inputs to oneSylwester Nawrocki2011-09-061-37/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | The current driver allowed camera sensors to be used only with single FIMC H/W instance, FIMC0..FIMC2/3, designated at compile time. Remaining FIMC entities could be used for video processing only, as mem-to-mem devices. Required camera could be selected with S_INPUT ioctl at one devnode only. However in that case it was not possible to use both cameras independently at the same time, as all sensors were registered to single FIMC capture driver. In most recent S5P SoC version there is enough FIMC H/W instances to cover all physical camera interfaces. Each FIMC instance exports its own video devnode. Thus we distribute the camera sensors one per each /dev/video? by default. It will allow to use both camera simultaneously by opening different video node. The camera sensors at FIMC are now not selected with S_INPUT ioctl, there is one input only available per /dev/video?. By default a single sensor is connected at FIMC input as specified by the media device platform data subdev description table. This assignment can be changed at runtime through the pipeline reconfiguration at the media device level. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Remove sclk_cam clock handlingSylwester Nawrocki2011-09-062-12/+3
| | | | | | | | | | | | | | There are 2 separate clock outputs available in the SoC for external sensors. These two clocks can be shared among all FIMC entities and there is currently no any arbitration of the clocks in the driver. So make the capture driver not touching these clocks and let them be be properly handled at the media device driver level, enabling proper arbitration between FIMC entities. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Remove registration of video nodes from probe()Sylwester Nawrocki2011-09-063-53/+17
| | | | | | | | | | | | | Do not register video nodes during FIMC device probe. Also make fimc_register_m2m_device() public for use by the media device driver. The video nodes are to be registered during the media device driver initialization, altogether with the subdev devnodes. The video capture nodes need to be registered as last ones when the remaining pipeline elements are already initialized. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Add media entity initializationSylwester Nawrocki2011-09-063-22/+37
| | | | | | | | | | | Add intialization of the media entities for video capture and mem-to-mem video nodes. The mem-to-mem entity has no pads whereas the capture entity has single sink pad. Also clean up the video node naming for consistency. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-csis: Rework the system suspend/resume helpersSylwester Nawrocki2011-09-061-19/+22
| | | | | | | | | | | Do not resume the device during system resume if it was idle before system suspend, as this causes resume from suspend to RAM failures on Exynos4. For this purpose runtime PM and system sleep helpers are separated. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-csis: Handle all available power suppliesSylwester Nawrocki2011-09-061-23/+26
| | | | | | | | | | | | | | | | | | | | | On the SoCs this driver is intended to support the are three separate pins to supply the MIPI-CSIS subsystem: 1.1V or 1.2V, 1.8V and power supply for an internal PLL. This patch adds support for two separate voltage supplies to cover properly board configurations where PMIC requires to configure independently each external supply of the MIPI-CSI device. The 1.8V and PLL supply are assigned a single "vdd18" regulator supply name as it seems more reasonable than creating separate regulator supplies for them. While at here stop using the 'fixed_phy_vdd' platform_data field. It has been introduced for boards where the MIPI-CSIS supplies are not controllable. However it is not needed as those boards can use the dummy regulator. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Add runtime PM support in the mem-to-mem driverSylwester Nawrocki2011-09-064-79/+236
| | | | | | | | | | | | | | | | | | Add runtime PM and system sleep support in the memory-to-memory driver. It's required to enable the FIMC operation on Exynos4 SoCs. This patch prevents system boot failure when the driver is compiled in, as it now tries to access its I/O memory without first enabling the corresponding power domain. The camera capture device suspend/resume is not fully covered, the capture device is just powered on/off during the video node open/close. However this enables it's normal operation on Exynos4 SoCs. [mchehab@redhat.com: fix a small checkpatch error] Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] media: vb2: change queue initialization orderMarek Szyprowski2011-09-061-25/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes the order of operations during stream on call. Now the buffers are first queued to the driver and then the start_streaming method is called. This resolves the most common case when the driver needs to know buffer addresses to enable dma engine and start streaming. Additional parameter to start_streaming method have been added to simplify drivers code. The driver are now obliged to check if the number of queued buffers is high enough to enable hardware streaming. If not - it can return an error. In such case all the buffers that have been pre-queued are invalidated. This patch also updates all videobuf2 clients to work properly with the changed order of operations. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Pawel Osciak <pawel@osciak.com> CC: Guennadi Liakhovetski <g.liakhovetski@gmx.de> CC: Hans Verkuil <hverkuil@xs4all.nl> CC: Tomasz Stanislawski <t.stanislaws@samsung.com> CC: Sylwester Nawrocki <s.nawrocki@samsung.com> CC: Kamil Debski <k.debski@samsung.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Josh Wu <josh.wu@atmel.com> CC: Hans de Goede <hdegoede@redhat.com> CC: Paul Mundt <lethal@linux-sh.org> Tested-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] media: vb2: dma contig allocator: use dma_addr instread of paddrMarek Szyprowski2011-09-061-3/+3
| | | | | | | | | | | | | Use the correct 'dma_addr' name for the buffer address. 'paddr' suggested that this is the physical address in system memory. For most ARM platforms these two are the same, but this is not a generic rule. 'dma_addr' will also point better to dma-mapping api. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Pawel Osciak <pawel@osciak.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] media: vb2: change plane sizes array to unsigned int[]Marek Szyprowski2011-09-062-2/+2
| | | | | | | | | | | | Plane sizes array was declared as unsigned long[], while unsigned int is more than enough for storing size of the video buffer. This patch reduces the size of the array by definiting it as unsigned int[]. Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Pawel Osciak <pawel@osciak.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] Stop using linux/version.h on the remaining video driversMauro Carvalho Chehab2011-07-272-4/+1
| | | | | | | | | | | | | Standardize the remaining video drivers to return the API version for the VIDIOC_QUERYCAP version, instead of a per-driver version. Those drivers had the version updated more recently or are SoC drivers. Even so, it doesn't sound a good idea to keep a per-driver version control, so, let's use the per-subsystem version control instead. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Update copyright noticesSylwester Nawrocki2011-06-113-9/+6
| | | | | | Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Use pix_mp for the color format lookupSylwester Nawrocki2011-06-111-1/+1
| | | | | | | | | | With multi-planar formats fmt.pix_mp member of struct v4l2_format should be used rather than fmt.pix. Fix find_fmt() function to do the right thing. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Remove empty buf_init operationSylwester Nawrocki2011-06-111-7/+0
| | | | | | | | | The buf_init buffer queue operation is optional and buffer_init() does nothing, remove it. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Fix wrong buffer size in queue_setupSylwester Nawrocki2011-06-111-8/+4
| | | | | | | | | | | Avoid dereferencing of NULL f->fmt. Correct size of the allocated buffer in case the crop rectangle is smaller than the bounds rectangle (configured with S_FMT). Also remove redundant check for *num_buffer == 0 as this case is handled in videobuf2. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Fix data structures documentation and cleanup debug traceSylwester Nawrocki2011-06-113-28/+12
| | | | | | | | | Correct inconsistencies in data structures' documentation. Remove meaningless debug traces. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Fix V4L2_PIX_FMT_RGB565X descriptionSylwester Nawrocki2011-06-111-1/+0
| | | | | | | | | Remove V4L2_MBUS_FMT_RGB565_2X8_BE media code entry as camera interface supports only packed YUYV formats. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Fix possible memory leak during capture devnode registrationSylwester Nawrocki2011-06-111-0/+1
| | | | | | | | | Add missing kfree on the error path. Reported-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-csis: Do not use uninitialized variables in s5pcsis_suspendSylwester Nawrocki2011-05-201-2/+2
| | | | | | Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] v4l: Add v4l2 subdev driver for S5P/EXYNOS4 MIPI-CSI receiversSylwester Nawrocki2011-05-203-2/+750
| | | | | | | | | | | | Add the subdev driver for the MIPI CSIS units available in S5P and Exynos4 SoC series. This driver supports both CSIS0 and CSIS1 MIPI-CSI2 receivers. The driver requires Runtime PM to be enabled for proper operation. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* Merge branch 'v4l_for_linus' of ↵Linus Torvalds2011-04-272-30/+52
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (42 commits) [media] media: vb2: correct queue initialization order [media] media: vb2: fix incorrect v4l2_buffer->flags handling [media] s5p-fimc: Add support for the buffer timestamps and sequence [media] s5p-fimc: Fix bytesperline and plane payload setup [media] s5p-fimc: Do not allow changing format after REQBUFS [media] s5p-fimc: Fix FIMC3 pixel limits on Exynos4 [media] tda18271: update tda18271c2_rf_cal as per NXP's rev.04 datasheet [media] tda18271: update tda18271_rf_band as per NXP's rev.04 datasheet [media] tda18271: fix bad calculation of main post divider byte [media] tda18271: prog_cal and prog_tab variables should be s32, not u8 [media] tda18271: fix calculation bug in tda18271_rf_tracking_filters_init [media] omap3isp: queue: Don't corrupt buf->npages when get_user_pages() fails [media] v4l: Don't register media entities for subdev device nodes [media] omap3isp: Don't increment node entity use count when poweron fails [media] omap3isp: lane shifter support [media] omap3isp: ccdc: support Y10/12, 8-bit bayer fmts [media] media: add missing 8-bit bayer formats and Y12 [media] v4l: add V4L2_PIX_FMT_Y12 format cx23885: Fix stv0367 Kconfig dependency [media] omap3isp: Use isp xclk defines ... Fix up trivial conflict (spelink errurs) in drivers/media/video/omap3isp/isp.c
| * [media] s5p-fimc: Add support for the buffer timestamps and sequenceSylwester Nawrocki2011-04-191-0/+10
| | | | | | | | | | | | | | | | | | Add support for buffer timestamps and the sequence number in the video capture driver. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] s5p-fimc: Fix bytesperline and plane payload setupSylwester Nawrocki2011-04-192-16/+20
| | | | | | | | | | | | | | | | | | | | Make sure the sizeimage for 3-planar color formats is width * height * 3/2 and the bytesperline is same for each plane in case of a multi-planar format. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] s5p-fimc: Do not allow changing format after REQBUFSSylwester Nawrocki2011-04-192-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | Protecting the color format with vb2_is_streaming() is not sufficient as this prevents changing the format only after VIDIOC_STREAMON. To prevent the color format reconfiguration as soon as buffers are allocated use vb2_is_busy() instead. Also make the videobuf queue ops structure static. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] s5p-fimc: Fix FIMC3 pixel limits on Exynos4Sylwester Nawrocki2011-04-191-11/+19
| | | | | | | | | | | | | | | | | | | | | | Correct pixel limits for the fourth FIMC entity on Exynos4 SoCs. FIMC3 only supports the writeback input from the LCD mixer. Also rename s5pv310 variant to exynos4 which is needed after renaming s5pv310 series to Exynos4. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* | Fix common misspellingsLucas De Marchi2011-03-311-1/+1
|/ | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
* [media] s5p-fimc: Fix G_FMT ioctl handlerSylwester Nawrocki2011-03-221-4/+23
| | | | | | | | | | Use pix_mp member of struct v4l2_format to return a format description rather than pix. Also fill in the plane_fmt array. This is a missing bit of conversion to the multiplanar API. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Use dynamic debugSylwester Nawrocki2011-03-221-5/+1
| | | | | | | | | | | | | | Use pr_debug instead of printk so it is possible to control debug traces at runtime. E.g. to enable debug trace in file fimc-core.c use command: echo -n 'file fimc-core.c +p' > /sys/kernel/debug/dynamic_debug/control or echo -n 'file fimc-core.c -p' > /sys/kernel/debug/dynamic_debug/control to disable. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Add a platform data entry for MIPI-CSI data alignmentSylwester Nawrocki2011-03-221-2/+4
| | | | | | | | | Allow the MIPI-CSI data alignment to be defined in the board setup as it may be different across various camera sensors. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Allow defining number of sensors at runtimeSylwester Nawrocki2011-03-222-27/+18
| | | | | | | | | Add num_clients field to struct s5p_fimc_isp_info to define exactly size of clients array which simplifies a bit the sensors management. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Prevent hanging on device close and fix the lockingSylwester Nawrocki2011-03-223-114/+136
| | | | | | | | | | | | | | | | | Rework the locking in m2m driver to assure proper operation on SMP systems. When job_abort or stop_streaming was called to immediately shutdown a memory-to-memory transaction video buffers scheduled for processing were never returned to vb2 and v4l2_m2m_job_finish was not called which led to hanging. Correct this and also return the unprocessed buffers to vb2 marking them as erroneous, in case the end of frame interrupt do not occur. Reported-by: Sewoon Park <seuni.park@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Prevent oops when i2c adapter is not availableSylwester Nawrocki2011-03-221-1/+1
| | | | | | | | Prevent invalid pointer dereference on error path. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
OpenPOWER on IntegriCloud